Parameters Optimization of a Novel 5-DOF Gasbag Polishing Machine Tool

The research on the parameters optimization for gasbag polishing machine tools, mainly aims at a better kinematics performance and a design scheme. Serial structural arm is mostly employed in gasbag polishing machine tools at present, but it is disadvantaged by its complexity, big inertia, and so on. In the multi-objective parameters optimization, it is very difficult to select good parameters to achieve excellent performance of the mechanism. In this paper, a statistics parameters optimization method based on index atlases is presented for a novel 5-DOF gasbag polishing machine tool. In the position analyses, the structure and workspace for a novel 5-DOF gasbag polishing machine tool is developed, where the gasbag polishing machine tool is advantaged by its simple structure, lower inertia and bigger workspace. In the kinematics analyses, several kinematics performance evaluation indices of the machine tool are proposed and discussed, and the global kinematics performance evaluation atlases are given. In the parameters optimization process, considering the assembly technique, a design scheme of the 5-DOF gasbag polishing machine tool is given to own better kinematics performance based on the proposed statistics parameters optimization method, and the global linear isotropic performance index is 0.5, the global rotational isotropic performance index is 0.5, the global linear velocity transmission performance index is 1.012 3 m/s in the case of unit input matrix, the global rotational velocity transmission performance index is 0.102 7 rad/s in the case of unit input matrix, and the workspace volume is 1. The proposed research provides the basis for applications of the novel 5-DOF gasbag polishing machine tool, which can be applied to the modern industrial fields requiring machines with lower inertia, better kinematics transmission performance and better technological efficiency.

A Nickel Coating Removal Process for ITER Superconducting Cables

A new method is developed for removing the nickel coating on ITER superconducting cables by mechanical polishing.The obvious advantage of the mechanical method,which uses a nylon brush,is that there is no chemical residual left in the cable,which would otherwise result in passive effects on the joint resistance.The coating resistance test results of this newly developed method are compared with those of the two other methods that can meet the requirements of ITER.An automatic polishing machine is designed and manufactured for the procedure to provide quality under precise control.This new technique can replace the conventional manual method due to its improved efficiency.