A Microscale Model for Air Pollutant Dispersion Simulation in Urban Areas： Presentation of the Model and Performance over a Single Building

A microscale air pollutant dispersion model system is developed for emergency response purposes. The model includes a diagnostic wind field model to simulate the wind field and a random-walk air pollutant dispersion model to simulate the pollutant concentration through consideration of the influence of urban buildings. Numerical experiments are designed to evaluate the model＇s performance, using CEDVAL （Compilation of Experimental Data for Validation of Microscale Disper- sion Models） wind tunnel experiment data, including wind fields and air pollutant dispersion around a single building. The results show that the wind model can reproduce the vortexes triggered by urban buildings and the dispersion model simulates the pollutant concentration around buildings well. Typically, the simulation errors come from the determination of the key zones around a building or building cluster. This model has the potential for multiple applications; for example, the prediction of air pollutant dispersion and the evaluation of environmental impacts in emergency situations; urban planning scenarios; and the assessment of microscale air quality in urban areas.

Effects of a rooftop wind turbine on the dispersion of air pollutant behind a cube-shaped building

The concentration distribution of urban air pollutants is closely related to people’s health.As an important utilization form of urban wind power,rooftop wind turbines have been widely used in cities.The wake effect of the rooftop wind turbines will change the flow behind buildings and then affect the pollutant dispersion.To this end,the pollutant dispersion behind the building is studied via the computational fluid dynamics method.The actuator disk model and idealized cube are adopted to model the wind turbine and the building,respectively.The study shows that the rooftop wind turbine can reduce the pollutant mass fraction near the ground and the pedestrian level.Due to the wake effect of the rooftop wind turbine,the turbulent fluctuation behind the building is weakened,and the spanwise pollutant dispersion is suppressed.Besides,the rooftop wind turbine weakens the downwash movement of the building,which enhances the vertical pollutant dispersion.

ADAPTIVE FINITE ELEMENT METHOD FOR ANALYSIS OF POLLUTANT DISPERSION IN SHALLOW WATER

A finite element method for analysis of pollutant dispersion in shallow water is presented. The analysis is divided into two parts ： （ 1 ） computation of the velocity flow field and water surface elevation, and （2） computation of the pollutant concentration field from the dispersion model. The method was combined with an adaptive meshing technique to increase the solution accuracy, as well as to reduce the computational time and computer memory. The finite element formulation and the computer programs were validated by several examples that have known solutions. In addition, the capability of the combined method was demonstrated by analyzing pollutant dispersion in Chao Phraya River near the gulf of Thailand.

Space Observations and Global Climatic Data Reanalysis in AERMOD Modeling Package to Enhance the Industrial Air Pollution and Health Risk Assessment

We try to enhance the AERMOD industrial pollution dispersion model with remote sensing observations and climatic models based on them. In this paper, we focus on surface parameters (albedo, roughness, Bowen ratio) and land use classification on which they depend. We model maximum hourly concentrations and the resulting acute health risk and assess the effect on them produced by using remote sensing data for local areas around industrial plants instead of global standard AERMOD parameters. We consider five real multi-source plants for the effect of classification and two of them for the effect of surface parameters. The effect on the critical pollutant is measured in three ways: a) as difference between the yearly maxima of hourly concentrations of a critical pollutant (“absolute”);b) the same limited to daytime workhours and 95% quantile instead of absolute maximum (“regulatory”);c) as maximum hourly difference over a year (“instant”). The measure of effect is divided either by the reference concentration of the pollutant, which yields the impact on health risk, or by the concentration obtained with AERMOD standards, which yields relative measure of impact. For a), the impact of roughness dominates, that of albedo is small and that of the Bowen ratio is almost zero. For b), the impact of roughness is less prominent, and that of albedo and Bowen ratio is noticeable. For c), the impact is considerable for all three parameters. The effect of land use classification is considerable in all three cases a) - c). We provide the figures for different measures of remote sensing data effect and discuss the perspective of using remote sensing data in regulatory context.

Numerical Study of Flow and Gas Diffusion in the Near-Wake behind an Isolated Building

To assist validation of the experimental data of urban pollution dispersion, the effect of an isolated building on the flow and gaseous diffusion in the wake region have been investigated numerically in the neutrally stratified rough-walled turbulent boundary layer. Numerical studies were carried out using Computational Fluid Dynamics （CFD） models. The CFD models used for the simulation were based on the steady-state Reynolds-Average Navier-Stoke equations （RANS） with κ-ε turbulence models; standard κ-ε and RNG κ-ε models. Inlet conditions and boundary conditions were specified numerically to the best information available for each fluid modeling simulation. A gas pollutant was emitted from a point source within the recirculation cavity behind the building model. The accuracy of these simulations was examined by comparing the predicted results with wind tunnel experimental data. It was confirmed that simulation using the model accurately reproduces the velocity and concentration diffusion fields with a fine-mish resolution in the near wake region. Results indicated that there is a good agreement between the numerical simulation and the wind tunnel experiment for both wind flow and concentration diffusion. The results of this work can help to improve the understanding of mechanisms of and simulation of pollutant transport in an urban environment.

Key emergency response technologies for abrupt air pollution accidents in China

Abrupt air pollution accidents can endanger people’s health and destroy the local ecological environment.The appropriate emergency response can minimize the harmful effects of accidents and protect people’s lives and property.This paper provides an overview of the key emergency response technologies for abrupt air pollution accidents around the globe with emphasis on the major achievements that China has obtained in recent years.With decades of effort,China has made significant progress in emergency monitoring technologies and equipment,source estimation technologies,pollutant dispersion simulation technologies and others.Many effective domestic emergency monitoring instruments(e.g.,portable DOAS/FT-IR systems,portable FID/PID systems,portable GC-MS systems,scanning imaging remote sensing systems,and emergency monitoring vehicles)had been developed which can meet the demands for routine emergency response activities.A monitoring layout technique combining air dispersion simulation,fuzzy comprehensive evaluation,and a post-optimality analysis was proposed to identify the optimal monitoring layout scheme under the constraints of limited monitoring resources.Multiple source estimation technologies,including the forward method and the inversion method,have been established and evaluated under various scenarios.Multi-scale dynamic pollution dispersion simulation systems with high temporal and spatial resolution were further developed.A comprehensive emergency response platform integrating database support,source estimation,monitoring schemes,fast monitoring of pollutants,pollution predictions and risk assessment was developed based on the technical idea of"source identification-model simulation-environmental monitoring"dynamic interactive feedback.It is expected that the emergency response capability for abrupt air pollution accidents will gradually improve in China.

Viscoelastic modeling of the diffusion of polymeric pollutants injected into a pipe flow

This study focuses on the transient analysis of nonlinear dispersion of a polymeric pollutant ejected by an external source into a laminar pipe flow of a Newtonian liquid under axi-symmetric conditions.The influence of density variation with pollutant concentration is approximated according to the Boussinesq approximation and the nonlinear governing equations of momentum,pollutant concentration are obtained together with and Oldroyd-B constitutive model for the polymer stress.The problem is solved numerically using a semi-implicit finite difference method.Solutions are presented in graphical form for various parameter values and given in terms of fluid velocity,pollutant concentration,polymer stress components,skin friction and wall mass transfer rate.The model can be a useful tool in understanding the dynamics of industrial pollution situations arising from improper discharge of hydrocarbon pollutants into,say,water bodies.The model can also be quite useful for available necessary early warning methods for detecting or predicting the scale of pollution and hence help mitigate related damage downstream by earlier instituting relevant decontamination measures.

Physio-chemical modeling of the NO_(x)-O_(3) photochemical cycle and the air pollutants’ reactive dispersion around an isolated building

A numerical physio-chemical model of the NO_(x)-O_(3) photochemical cycle in the near-wake region of an isolated residential/office building has been presented in this study.The investigation delves into the dispersion of reactive air pollutants through the lens of fluid phenomenology and its impact on chemical reactivity,formation,transport,deposition,and removal.Computational fluid dynamics(CFD)simulations were conducted for the ground-point-source(GES)and roof-pointsource(RES)scenarios.Results show that the Damköhler number(Da),which quantifies pollutants’physio-chemical timescales,displays a strong inverse proportionality with the magnitude and spread of NO–increasing Da reduces human exposure to the toxic NO and NO_(2) substantially.When different wind directions were considered,the dispersion range of NO exhibited varying shrinking directions as Da increased.Furthermore,as Da increases,the concentration ratio KNO_(2)/KNO_(x),which quantifies the production of NO_(2) resulting from NO depletion,forms sharp high-low gradients near emission sources.For GES,the dispersion pattern is governed by the fluid’s phenomenological features.For RES,the intoxicated area emanates from the building’s leading-edge,with the lack of shielding inhibiting pollutant interactions in the near-wake,resulting in scant physio-chemical coupling.The NO_(2)/NO_(x) distribution follows a self-similar,stratified pattern,exhibiting consistent layering gradients and attributing to the natural deposition of the already-reacted pollutants rather than in-situ reactions.In the end,building design guidelines have been proposed to reduce pedestrian and resident exposure to NO_(x)-O_(3).

Effects of building aspect ratio,diurnal heating scenario,and wind speed on reactive pollutant dispersion in urban street canyons

A photochemistry coupled computational fluid dynamics （CFD） based numerical model has been developed to model the reactive pollutant dispersion within urban street canyons, particularly integrating the interrelationship among diurnal heating scenario （solar radiation affections in nighttime, daytime, and sun-rise/set）, wind speed, building aspect ratio （building-height-to-street-width）, and dispersion of reactive gases, specifically nitric oxide （NO）, nitrogen dioxide （NO2） and ozone （O3） such that a higher standard of air quality in metropolitan cities can be achieved. Validation has been done with both experimental and numerical results on flow and temperature fields in a street canyon with bottom heating, which justifies the accuracy of the current model. The model was applied to idealized street canyons of different aspect ratios from 0.5 to 8 with two different ambient wind speeds under different diurnal heating scenarios to estimate the influences of different aforementioned parameters on the chemical evolution of NO, NO2 and 03. Detailed analyses of vertical profiles of pollutant concentrations showed that different diurnal heating scenarios could substantially affect the reactive gases exchange between the street canyon and air aloft, followed by respective dispersion and reaction. Higher building aspect ratio and stronger ambient wind speed were revealed to be, in general, responsible for enhanced entrainment of 03 concentrations into the street canyons along windward walls under all diurnal heating scenarios. Comparatively, particular attention can be paid on the windward wall heating and nighttime uniform surface heating scenarios.

Field synergy analysis of pollutant dispersion in street canyons and its optimization by adding wind catchers

The microenvironment,which involves pollutant dispersion of the urban street canyon,is critical to the health of pedestrians and residents.The objectives of this work are twofold:(i)to effectively assess the pollutant dispersion process based on a theory and(ii)to adopt an appropriate stratigy,i.e.,wind catcher,to alleviate the pollution in the street canyons.Pollutant dispersion in street canyons is essentially a convective mass transfer process.Because the convective heat transfer process and the mass transfer process are physically similar and the applicability of field synergy theory to turbulence has been verified in the literature,we apply the field synergy theory to the study of pollutant dispersion in street canyons.In this paper,a computational fluid dynamics(CFD)simulation is conducted to investigate the effects of wind catcher,wind speed and the geometry of the street canyons on pollutant dispersion.According to the field synergy theory,Sherwood number and field synergy number are used to quantitatively evaluate the wind catcher and wind speed on the diffusion of pollutants in asymmetric street canyons.The results show that adding wind catchers can significantly improve the air quality of the step-down street canyon and reduce the average pollutant concentrations in the street canyon by 75%.Higher wind speed enhances diffusion of pollutants differently in different geometric street canyons.

Numerical studies on issues of Re-independence for indoor airflow and pollutant dispersion within an isolated building

This study conducted the numerical models validated by wind-tunnel experiments to investigate the issues of Re-independence of indoor airflow and pollutant dispersion within an isolated building.The window Reynolds number(Re_(w))was specified to characterize the indoor flow and dispersion.The indicators of RRC(ratio of relative change)or DR(K_DR)(difference ratio of dimensionless concentration)<5%were applied to quantitatively determine the critical Rew for indoor flow and turbulent diffusion.The results show that the critical Re(Re_(crit)) value is position-dependent,and Re_(crit) at the most unfavorable position should be suggested as the optimal value within the whole areas of interest.Thus Re(H,orit)=27,000 is recommended for the outdoor flows;while Re_(w,crit)=15,000 is determined for the indoor flows due to the lower part below the window showing the most unfavorable.The suggested Re_(w,crit)(=15,000)for indoor airflow and cross ventilation is independence of the window size.Moreover,taking K_DR≤5% as the indicator,the suggested Re_(w,crit) for ensuring indoor pollutant diffusion enter the independence regime should also be 15,000,indicating that indoor passive diffusion is completely determined by the flow structures.The contours of dimensionless velocity(U/U_(0))and concentration(K)against the increasing Re(w) further confirmed this critical value.This study further reveals the Re-independence issues for indoor flow and dispersion to ensure the reliability of the data obtained by reduced-scale numerical or wind-tunnel models.

Wind tunnel simulation of pollutant dispersion inside street canyons with galleries and multi-level flat roofs

In this study, the pollutant dispersion within street canyons is studied by experiments conducted in an environmental wind tunnel. The vehicular exhaust emissions are modeled using a line source. The pollutant （smoke） concentrations inside the canyons are measured based on a light scattering technique. The pollutant concentrations within the four different street canyons containing the galleries and the three-level flat-roofs under both the isolated and urban environments are obtained and discussed. For each of the four canyon configurations investigated, it is found that there is an obvious discrepancy between the pollutant dispersion patterns under the isolated environment and the urban environment. The three-level fiat roof is found to significantly influence the pollutant distribution pattern in a street canyon. In order to clarify the impacts of the wedge-shaped roofs on the pollutant dispersion inside an urban street canyon of an aspect ratio of 1.0, the pollutant distributions inside urban street canyons of three different wedge-shaped roof combinations are measured and analyzed. It is revealed that the pollutant distribution pattern inside the urban street canyon of an aspect ratio of 1.0 is influenced greatly by the wedge-shaped roof, especially, when an upward wedge-shaped roof is placed on the upstream building of the canyon. Images from this study may be utilized for a rough evaluation of the computational fluid dynamics （CFD） models and for helping architects and urban planners to select the canyon configurations with a minimum negative impact on the local air quality.

Coordinated Optimization of Multi-energy Generation Systems Considering the Health Damages of Coal-fired Pollutant Dispersion

Pollutants emitted from coal-fired power plants lead to the deterioration of air quality in developing countries,and contribute to both mortality and morbidity.To improve air quality from power generation,new dispatch strategies incorporated with air pollution dispersion models should be considered.This paper takes into account the impact of meteorological variations on spatio-temporal dispersion of pollutants.Depending on the coal-fired pollutant concentration estimated by the Gaussian plume dispersion model,exposure-response functions are used to quantify the resulting health effects.Furthermore,the corresponding economic costs of health damages are incorporated to penalize the power dispatch.Considering generation costs and economic costs of health damages,this paper formulates a twostage stochastic optimization model of a multi-energy generation system including coal units,gas units,and photovoltaic stations.Finally,numerical studies based on a modified IEEE 14-node system are performed for illustration and validation.

Numerical investigation on fire-induced indoor and outdoor air pollutant dispersion in an idealized urban street canyon

Fire-induced pollutant dispersion under the influence of buoyancy in urban street canyons has attracted wide attention given its adverse impact on human health.This study analyzes the influences of fire source location and crossflowing wind(perpendicular to the canyon centerline)on indoor and outdoor air pollutant dispersion in an idealized urban street canyon by employing large eddy simulation.Three fire scenarios are defined according to the transverse location of the fire source:near the windward building(scenario 1),in the middle of the canyon(scenario 2),and near the leeward building(scenario 3).Results show that a re-entrainment phenomenon appears when the wind velocity reaches a critical value in scenarios 1 and 2,but it doesn't occur in scenario 3.Fire source location significantly influences the critical re-entrainment velocity.The critical velocity in scenario 1 is approximate 1.2-1.5 m/s larger than that in scenario 2.When the heat release rate is large,the critical Fr numbers are less sensitive to changes in HRR,and remain approximately constant with values of 0.47(scenario 1)and 0.37(scenario 2).When the wind velocity is large,more compartments are expected to be affected in the upper floors in all of the three scenarios,and smoke is distributed in an inverted triangle within the buildings.The indoor/outdoor temperature and pollutant concentrations are also analyzed.Our findings can provide valuable information for both human and property safety in relation to urban street canyons and their surrounding buildings.

Urban Physics： Effect of the micro-climate on comfort, health and energy demand

The global trend towards urbanisation explains the growing interest in the study of the modification of the urban climate due to the heat island effect and global warming, and its impact on enersy use of buildings. Also urban comfort, health and durability, referring respectively to pedestrian wind/ thermal comfort, pollutant dispersion and wind-driven rain are of interest. Urban Physics is a well- established discipline, incorporating relevant branches of physics, environmental chemistry, aerodynamics, meteorolosy and statistics. Therefore, Urban Physics is well positioned to provide keycontributions to the current urban problems and challenges. The present paper addresses the role of Urban Physics in the study of wind comfort, thermal comfort, energy demand, pollutant dispersion and wind-driven rain. Furthermore, the three major research methods applied in Urban Physics, namely field experiments, wind tunnel experiments and numerical simulations are discussed. Case studies illustrate the current challenges and the relevant contributions of Urban Physics.

Buoyancy and turbulence-driven atmospheric circulation over urban areas

In the buoyancy and turbulence-driven atmospheric circulations（BTDAC） that occur over urban areas where the approach means wind speeds are very low（less than turbulent fluctuations and typically 3 m/sec）, the surface temperatures are significantly higher than those in the external rural areas, and the atmosphere above the mixing layer is stably stratified. In this paper, the mechanisms of BTDAC formation are studied through laboratory experiments and modelling, with additional low-level inflow from external rural areas and a divergent outflow in the opposite direction in the upper part of the mixed layer. Strong turbulent plumes in the central region mix the flow between lower and higher levels up to the inversion height. There are shear-driven turbulent eddies and weaker buoyant plumes around the periphery of the urban area. As the approach flow is very weak,the recirculating streamlines within the dome restrict the ventilation, and the dispersion of pollution emitted from sources below the inversion height leading to a rise in the mean concentration. Low-level air entrained from rural areas can, however, improve ventilation and lower this concentration. This trend can also be improved if the recirculating structure of the BTDAC flow pattern over urban areas breaks down as a result of the surface temperature distribution not being symmetrical, or as the approach wind speed increases to a level comparable with the mean velocity of circulation, or（except near the equator） the urban area is large enough that the Coriolis acceleration is significant.