Sorption and Diffusion Behavior of Carbon Dioxide into Poly（l-lactic acid） Films at Elevated Pressures

Equilibrium sorption amount, desorption diffusion coefficients and sorption diffusion coefficients of CO2 in poly（l-lactic acid） （PLLA） films at elevated pressures were determined by the gravimetric method, in which the Fick＇s diffusion model was applied to analyze both the desorption and sorption processes. The equilibrium sorption amount of CO2 in PLLA increased with lowering temperature and elevating pressure at the temperature range from 40 to 60 ℃ and pressure from 10^4 to 2x10^4 kPa. Desorption diffusion coefficients were greatly influenced by the equilibrium sorption amount, and they were in the same order of magnitude as the sorption diffusion coefficients. The scan electron microscope （SEM） photos demonstrated that there was no foaming phenomenon of the PLLA film during desorption and sorption processes. The XRD spectra implied that the crystalline degree of PLLA film decreased after CO2 processing. It was concluded that PLLA polymer could be well swollen and plasticized by supercritical CO2.

Synthesis of the Biomimetic Polymer: Aliphatic Diamine and RGDS Modified Poly(d,l-lactic acid)

A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the acidity and auto-accelerating degradation of PDLLA during degradation and to improve its biospecificity and biocompatibility. The synthetic copolymer was characterized by FTIR, ^13C NMR and amino acid analyzer （AAA）.

Synthesis and Characterization of Chitosan-g-poly- (D, L-lactic acid) Copolymer

Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.

SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM

In this paper, the surface structure of poly(L-lactic acid) (PLLA) film modified with gelatin was investigated. ThePLLA film specimens were treated directly with aqueous alkali solution to provide their surfaces with carboxyl groups, sothat these functional groups could become the reactive sites for gelatin immobilization. The functional groups of the PLLAfilms were identified by ATR-FTIR spectra and XPS spectra, the changes in surface morphology were observed by usingenvironmental scanning electron microscopy (ESEM), and the hydrophilicity of modified PLLA films was examined bywater contact angle measurement. Experimental results showed that the gelatin was immobilized with water-solublecarbodiimide (EDC) onto the PLLA film's surfaces, and the gelatin content on the polymer surface was related to carboxylicgroup formed in the controlled hydrolysis process. Rough surfaces caused by hydrolysis will predominantly favor the adhesion and growth of cell; and the hydrophilicity of these surfaces after the modification procedure is enhanced.

Transplantation of Nogo-66 receptor gene-silenced cells in a poly(D,L-lactic-co-glycolic acid) scaffold for the treatment of spinal cord injury

Inhibition of neurite growth, which is in large part mediated by the Nogo-66 receptor, affects neural regeneration following bone marrow mesenchymal stem cell transplantation. The tissue engineering scaffold poly（D,L-lactide-co-glycolic acid） has good histocompatibility and can promote the growth of regenerating nerve fibers. The present study used small interfering RNA to silence Nogo-66 receptor gene expression in bone marrow mesenchymal stem cells and Schwann cells, which were subsequently transplanted with poly（D,L-lactide-co-glycolic acid） into the spinal cord lesion regions in rats. Simultaneously, rats treated with scaffold only were taken as the control group. Hematoxylin-eosin staining and immunohistochemistry revealed that at 4 weeks after transplantation, rats had good motor function of the hind limb after treatment with Nogo-66 receptor gene-silenced ceils prus the poly（O,L-lactide-co-glycolic acid） scaffold compared with rats treated with scaffold only, and the number of bone marrow mesenchymal stem cells and neuron-like cells was also increased. At 8 weeks after transplantation, horseradish peroxidase tracing and transmission electron microscopy showed a large number of unmyelinated and myelinated nerve fibers, as well as intact regenerating axonal myelin sheath following spinal cord hemisection injury. These experimental findings indicate that transplantation of Nogo-66 receptor gene-silenced bone marrow mesenchymal stem cells and Schwann cells plus a poly（D,L-lactide-co-glycolic acid） scaffold can significantly enhance axonal regeneration of spinal cord neurons and improve motor function of the extremities in rats following spinal cord injury.

Multi-porous electroactive poly(L-lactic acid)/ polypyrrole composite micro/nano fibrous scaffolds promote neurite outgrowth in PC12 cells

In this study, poly（L-lactic acid）/ammonium persulfate doped-polypyrrole composite fibrous scaffolds with moderate conductivity were produced by combining electrospinning with in situ polymerization. PC12 cells were cultured on these fibrous scaffolds and their growth following electrical stimulation （0-20.0 μA stimulus intensity, for 1-4 days） was observed using inverted light microscopy, and scanning electron microscopy coupled with the MTT cell viability test. The results demonstrated that the poly（L-lactic acid）/ammonium persulfate doped-polypyrrole fibrous scaffold was a dual multi-porous micro/nano fibrous scaffold. An electrical stimulation with a current intensity 5.0- 10.0 μAfor about 2 days enhanced neuronal growth and neurite outgrowth, while a high current intensity （over 15.0 μA） suppressed them. These results indicate that electrical stimulation with a moderate current intensity for an optimum time frame can promote neuronal growth and neurite outgrowth in an intensity- and time-dependent manner.

Optimization of L-lactic Acid Production of Rhizopus Oryzae Mutant RLC41-6 by Ion Beam Implantation at Low-Energy

In order to obtain an industrial strain with a higher L（＋）-lactic acid yield, the strain Rhizopus oryzae RF3608 was mutated by means of nitrogen ion beam implantation and the mutant strain RLC41-6 was isolated. Under optimal conditions the yield of L（＋）-lactic acid produced in a shake-flask reached 133 g/L - 137 g/L after 36 h cultivation, indicating that the conversion rate based on glucose was as high as 88% - 91% and the productivity was 3.75 g/L.h. It was almost a 115% increase in lactic acid production compared with the original strain RF3608.

Optimization of L(+)-Lactic Acid Production from Xylose with Rhizopus Oryzae Mutant RLC41-6 Breeding by Low-Energy Ion Implantation

In order to obtain an industrial strain with a higher L（＋）-lactic acid yield, the strain Rhizopus oryzae PW352 was mutated by means of nitrogen ion beam implantation and the mutant strain Rhizopus oryzae RLC41-6 was obtained. An experimental finding was made in surprise that Rhizopus oryzae mutant RLC41-6 is not only an L（＋）-lactic acid producer from corn starch but also an efficient producer of L（＋）-lactic acid from xylose. Under optimal conditions, the production of L（＋）-lactic acid from 100 g/L xylose reached 77.39 g/L after 144 h fed-batch fermentation, A high mutation rate and a wide mutation spectrum of low-energy ion implantation were observed in the experiment.

Improvement of L(+)-Lactic Acid Production of Rhizopus Oryzae by Low-Energy Ions and Analysis of Its Mechanism

The wild type strain Rhizopus oryzae PW352 was mutated by means of nitrogen ion implantation （15 keV, 7.8×10^14 ～ 2.08 ×10^15 ions/cm^2） to find an industrial strain with a higher L（＋）-lactic acid yield, and two mutants RE3303 and RF9052 were isolated. In order to discuss the mechanism primarily, Lactate Dehydrogenase of Rhizopus oryzae was studied. While the two mutants produced L（＋）-lactic acid by 75% more than the wild strain did, their specific activity of Lactate Dehydrogenase was found to be higher than that in the wild strain. The optimum temperature of Lactate Dehydrogenase in Rhizopus oryzae RF9052 was higher. Compared to the wild strain, the Michaelis constant （Km） value of Lactate Dehydrogenase in the mutants was Changed. All these changes show that L（＋）-lactic acid production has a correlation with the specific activity of Lactate Dehydrogenase. The low-energy ions, implanted into the strain, may improve the specific activity of Lactate Dehydrogenase by influencing its gene structure and protein structure.

炔雌醇月缓释Poloxamer188复合聚L-乳酸电纺纤维的表征

目的考察在聚L-乳酸电纺纤维体系下,Poloxamer188复合量和炔雌醇的载药量对药物包裹和释放行为的影响。方法将炔雌醇、Poloxamer188、聚L-乳酸共同溶解在二氯甲烷中形成均相溶液后静电纺丝,其中Poloxamer188的复合量为聚L-乳酸质量的220%、240%、260%、280%、300%,炔雌醇的载量设为聚L-乳酸质量的5%、10%、15%。扫描电子显微镜观察纤维形态,差示热分析和X-射线衍射考察材料复合状态,高效液相色谱-紫外分光光度法测定释放介质中炔雌醇的含量,绘制释放曲线并拟合。结果所得产品均为微米级直径均匀无珠子结构的纤维。炔雌醇在纤维中复合良好,Poloxamer188在纤维表面有单体存在。炔雌醇在释放全程均为被增溶状态。随着Poloxamer188复合量的增高,药物释放量增加,随着炔雌醇载量的增高,药物释放量减少。Poloxamer188复合量为300%、炔雌醇载量为5%时,药物的百分释放量接近80%,缓释期可达28 d。释放曲线能够被Peppas方程式拟合。结论Poloxamer188复合量为聚L-乳酸的220%~300%时能够得到百分释放量较高的月缓释载炔雌醇电纺纤维。

抗菌性聚(L-乳酸)/单宁酸接枝薄膜的制备

分别合成聚(衣康酸-co-丁二醇)(PBI)和低分子量聚(L-乳酸)(OLLA),将两者混合后进行缩聚反应,得到聚(L-乳酸-co-衣康酸-co-丁二醇)(PLBI)。然后,采用单宁酸(TA)与甲基丙烯酸缩水甘油酯(GMA)进行开环反应,制备了带有双键的光敏单宁酸(pTA)。最后,采用紫外光照表面接枝法制备了一系列抗菌性PLBI-pTA薄膜,对其化学结构、热学性能、力学性能、亲水性、疏水性及抗菌性能进行测试。结果表明,接枝pTA后,薄膜玻璃化转变温度及结晶度均降低,薄膜的断裂伸长率升高,最高可达328.1%,使PLBI-pTA薄膜具有较好的延展性。薄膜的水接触角由72.20°减小至30.47°,薄膜表面的亲水性得到提高。另外,随着pTA含量的增加,薄膜对大肠杆菌的杀菌率逐渐提升,最高可达86%。

Optimization of L(+)-Lactic Acid Fermentation Without Neutralisation of Rhizopus Oryzae Mutant RK02 by Low-Energy Ion Implantation

In order to get an industrial strain which can yield a high concentration of lactic acid for ISPR （in situ product removal）, the original strain Rhizopus oryzae RE3303 was mutated by low-energy ion beam implantation. A mutant RK02 was screened, and the factors such as the substrate concentration, nitrogen source concentration, inoculum size, seed age, aeration and temperature that affect the production of lactic acid were studied in detail. Under optimal con- ditions, the maximum concentration of L（＋）-lactic acid reached 34.85 g/L after 30 h shake-flask cultivation without adding any neutralisation （5% Glucose added）, which was a 146% increase in lactic acid production after ion implantation compared with the original strain. It was also shown that RK02 can be used in ISPR to reduce the number of times of separation.

Combretastatin A4/poly(L-glutamic acid)-graft-PEG conjugates self-assembled to nanoparticles

Combretastatin A4(CA4) possesses varying ability to cause vascular disruption in tumors,while the short half-life, low water solubility and deactivation of many CA4 analogs during storage limited its antitumor efficacy and drug stability. A novel macromolecular conjugate of CA4(CA4-PL) was synthesized by covalent bonding of CA4 onto poly(L-glutamic acid)-graft-polyethylene glycol(PLG-g-PEG) via Yamaguchi reaction. The obtained CA4-PL was characterized by ~1H NMR, GPC, and UV methods, and the properties of the nanoparticles composed of CA4-PL, including critical aggregation concentration, size and size distribution, and morphology, were investigated. CA4-PL can self-assemble to form micelle-like nanoparticles of 80～120 nm in diameter, which may have potential to improve the blood circulation period as well as the targetability of CA4, and find applications to treat various tumors when combined with traditional chemotherapy or radio therapy.

Microwave-assisted Polycondensation of L-2-Hydroxy-3-phenylpropanoic Acid

Amorphous poly (L-2-hydroxy-3-phenylpropanoic acid) (PLHPPA) was synthesized by the microwave-assisted polycondensation of L-2-hydroxy-3-phenylpropanoic acid (LHPPA). The weight average molar mass (Mw) of PLHPPA ranged from 3600 to 5300 and polydispersity index (Mw/Mn) from 1.0 to 1.4 when the reaction mixture was irradiated by microwave at 255, 340 and 510 w for 1 to 10 h, respectively.

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID:SYNTHESIS,CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methyl-1-propanesulfonic acid （AMPS）, and maleic acid （MA） copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide （Bz2O2） as an initiator at 70℃. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis （content of N for AMPS-units）. Monomer reactivity ratios for AMPS （M1）-MA （M2） pair were determined by the application of conventional linearization methods such as Fineman-Ross （F-R）, Kelen-Tudos（KT） and Extended Kelen-Tudos （EKT） and a nonlinear error invariable model method using a computer program RREVM. The characterizations were done by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） thermal gravimetry analysis （TGA）, and and X-ray diffraction. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.

Microwave-assisted Polymerization of D,L-Lactide with Stannous Octanoate as Catalyst

Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.

Immobilization of Lactobacillus rhamnosus TISTR108 on Crude Pectin of Krung Kha Mao Leaves （Cissampe/os pareira L.） to Produce Lactic Acid in Longan Juice

L-（＋）-lactic acid production was studied by immobilized Lactobacillus rhamnosus T1STR108 on crude pectin from Krung Kha Mao Leaves. Central composite design was employed to determine the maximum lactic acid production of 42.88 g L-1 in predicted model with the factors at 4.11 g L1 of pectin, 6.05 mLLl inoculum and 1.09 mm of bead diameter. Statistical analyses demonstrated very high significance for the regression model, since the F-value computed 116.09 was much higher than the tabulated F-value 2.08 for the lactic acid production at 5% level for linear and quadratic polynomial regression models. The highest experimental lactic acid production was 43.57 g L^-1 at 96 h of fermentation, 1.58% higher than the predicted value.

Preparation and Degradation Characteristics of Poly(d,1-laetide) Composite Films

PDLLA/CHI/β-TCP/NGF composite films were prepared by a solvent evaporation method. The degradation characteristics of the poly （d, l-lactide） composite films were studied in vitro and in vivo. The acidity produced by poly （d, l-lactide） materials was not obvious. Adding chitosan and β-TCP can relieve the acidity problem and improve strength performance of films. The NGF has influences on the degradation characteristics of films. It is verified that PDLLA/CHI/β-TCP/NGF composite films prepared by solvent evaporation method have excellent degradation characteristics. It can be used as a perfect biomaterial for repairing nerve injuries.

高柔韧性PLLA/P(LA-BF)薄膜的制备及其热学性能、力学性能和流变性能

文中采用熔融缩聚法合成了聚(乳酸-富马酸丁二酯)共聚物(P(LA-BF))。进一步,将P(LA-BF)与PLLA共混制备了不同组分比的PLLA/P(LA-BF)薄膜。通过核磁共振和红外光谱分析了P(LA-BF)的聚合情况。研究表明,合成了处于无定形态的P(LA-BF)共聚物。采用广角X射线衍射仪、差示扫描量热仪和拉伸试验机评估了PLLA/P(LA-BF)薄膜的结晶性能、热学性能和力学性能。结果表明,P(LA-BF)的加入未改变PLLA的结晶能力,薄膜仍处于无定形态。同时,PLLA和P(LA-BF)具有很好的相容性,P(LA-BF)的加入提高了PLLA分子链的运动性和柔顺性,薄膜表现出高柔韧特点。随着P(LA-BF)含量的增加,断裂伸长率最高增加至PLLA/P(LA-BF)60的352.5%,约为纯PLLA的104倍;当P(LA-BF)的含量为80%时,薄膜断裂前的塑性变形变得更加明显,呈现出伴有韧窝的丝束状拉丝形貌。此外,流变性能表明,PLLA/P(LA-BF)40,PLLA/P(LA-BF)60和PLLA/P(LA-BF)80均表现出牛顿流体的特征,有效提高了PLLA熔体加工时的流动性。

Comparison of different cationic polymers efficacy in fabrication of alginate multilayer microcapsules

In past decades, alginate-based multilayer microcapsules have been given important attention in various pharmaceutical investigations. Alginate-poly l lysine-alginate(APA) is studied the most. Due to the similarity between the structure of polyethyleneimine(PEI) and poly-L-lysine(PLL) and also lower price of PEI than PLL, this study was conducted to compare the efficacy of linear(LPEI) and branch(BPEI) forms of PEI with PLL as covering layers in fabrication of microcapsules. The microcapsules were fabricated using electrostatic bead generator and their shape/size, surface roughness, mechanical strength, and interlayer interactions were also investigated using optical microscopy, AFM, explosion test and FTIR, respectively. Furthermore, cytotoxicity was evaluated by comparing the two anionic final covering layers alginate(Alg) and sodium cellulose sulphate(NCS) using MTT test. BPEI was excluded from the rest of the study due to its less capacity to strengthen the microcapsules and also the aggregation of the resultant alginate-BPEI-alginate microcapsules, while LPEI showed properties similar to PLL. MTT test also showed that NCS has no superiority over Alg as final covering layer. Therefore, it is concluded that, LPEI could be considered as a more cost effective alternative to PLL and a promising subject for future studies.