Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechan...Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.展开更多
The crystallization and crystalline structure of syndiotactic-polypropylene (sPP) and syndiotactic-poly(1-butene) (sPB) blend containing 10 (Bl-10), 25 (Bl-25), 50 (Bl-50), 75 (Bl-75), and 90 (Bl-90) wt% of sPB, have ...The crystallization and crystalline structure of syndiotactic-polypropylene (sPP) and syndiotactic-poly(1-butene) (sPB) blend containing 10 (Bl-10), 25 (Bl-25), 50 (Bl-50), 75 (Bl-75), and 90 (Bl-90) wt% of sPB, have been investigated by means of differential scanning calorimetry (DSC), FT-IR, and wide-angle X-ray diffraction (WAXD) analyses. The melt-crystallization behavior of the blend samples was studied by DSC on the cooling process at constant rates. Bl-50, Bl-75, and Bl-90 showed lower crystallization temperatures than the neat sPP. sPP in Bl-75 showed the lowest crystallization rate among the blend samples. Bl-90 showed a two-phase molten state, and sPP in Bl-90 crystallized via two-stepprocess. Time evolution of FT-IR spectroscopy at room temperature detected conformational transformation of the sPP polymer chain in the blend samples of Bl-50 and Bl-75. The absorption peaks intensity in the FT-IR spectra derived from the helical conformations in the crystalline phase decreased, and the planar zigzag conformations in the amorphous and mesophase phases decreased over the crystallization time. The time evolution of the WAXD profile of Bl-90 indicated that sPP in the blend accelerated the crystallization of sPB. The crystallized Bl-10, Bl-25, and Bl-50 samples showed diffraction peaks in WAXD profiles and melting endothermic peak in DSC profiles derived from only the sPP crystal. The crystallinity and melting temperature of sPP in the crystallized Bl-10, Bl-25, and Bl-50 samples were almost independent of the sPB content. Both the crystalline structure of sPP and sPB were detected in Bl-75 and Bl-90. Bl-75 showed the lowest crystallinity and melting temperature of sPP among the blend samples.展开更多
A series of phosphorus-modified PITQ-13 catalysts was prepared by wet impregnation of NH4H2PO4 solution into an HITQ-13 parent. The catalysts were characterized using XRD, N2 adsorption, MAS NMR and NH3-TPD. Their cat...A series of phosphorus-modified PITQ-13 catalysts was prepared by wet impregnation of NH4H2PO4 solution into an HITQ-13 parent. The catalysts were characterized using XRD, N2 adsorption, MAS NMR and NH3-TPD. Their catalytic performance in 1-butene catalytic cracking was evaluated in a fixed fluidized bed reactor. The results showed that the crystallinity, surface area and pore volume of P-modified PITQ-13 catalysts decreased with the increasing amounts of P. The number of weak acid sites increased, whereas that of strong acidity decreased. The selectivity to propylene in 1-butene cracking reactions increased because of the decrease in strong acidity. The yield of propylene achieved 41.6% over PITQ-13-2 catalyst with a P content of 1.0 wt%, which was 5.1% greater than that achieved over HITQ-13 catalyst.展开更多
Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impac...Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impact on the adsorption properties. In this study, a novel acidic ionic liquid, 1-butyl-3-(triethoxysilylpropyl)imidazolium hydrogen sulfate(i.e., [BTPIm][HSO_4]), was synthesized and subsequently grafted onto the MCM-36 zeolite for the regulation of its adsorption properties towards isobutane and 1-butene. The resultant [BTPIm][HSO_4]-immobilized MCM-36(i.e., MCM-36-IL) was characterized by FT-IR, XPS, XRD, SEM, TG/DTG and N_2 adsorption–desorption measurement. It was found that the specific surface area, micropore volume and mesopore volume of the MCM-36 support underwent a reduction upon the immobilization of ionic liquid,while the surface density of acid increased from 0.0014 to 0.0035 mmol·m^(-2). The adsorption capacity of isobutane and 1-butene on the MCM-36-IL was determined by a static volumetric method. Results demonstrated that the interaction between isobutane and MCM-36-IL was enhanced and the interaction between 1-butene and MCM-36-IL was reduced. As a result, a tunable adsorption ratio of isobutane/1-butene on MCM-36 was achieved.With the increase in surface density of acid and the tunable adsorption ratio of isobutane and 1-butene on the functionalized MCM-36, the acidic ionic liquid-immobilized zeolites are beneficial to obtain an improved reaction yield and a prolonged catalyst life in the reactions catalyzed by solid acid.展开更多
Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the...Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.展开更多
A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomer...A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.展开更多
While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are ca...While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are carried out in the presence of C_(60) using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecularstructures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C_(60) iscopolymerized with PP. Thus C_(60) plays the dual roles of comonomer and cocatalyst in the polymerizationreaction. C_(60) contents of the copolymers can be easily changed by varying the C_(60) amounts in the feedmixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance issuperior to that of parent C_(60).展开更多
Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of t...Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of themembranes with special asymmetric structure. The preliminary results of gas permeation measurements indicated that the resultant hollow fiber membranes have the potential ability for oxygen/nitrogen separation.展开更多
The highly conserved abundant nuclear protein poly （ADP-ribose） polymerase-1 （PARP-1） is activated by DNA damage. PARP-1 activation is associated in DNA repair, cell death and inflammation. Since oxidative stress ...The highly conserved abundant nuclear protein poly （ADP-ribose） polymerase-1 （PARP-1） is activated by DNA damage. PARP-1 activation is associated in DNA repair, cell death and inflammation. Since oxidative stress induced robust DNA damage and wide spread inflamma- tory responses are common pathologies of various CNS diseases, the attention towards PARP-1 as a therapeutic target has been amplifying. This review highlights the multiple roles of PARP- 1 in neurological diseases and po- tential of PARP- 1 inhibitors to enter clinical translation.展开更多
Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol ...Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol system. Gas chromatography–mass spectrometry, proton nuclear magnetic resonance and ^(13) C nuclear magnetic resonance analysis confirmed dimer, trimer and tetramer structures of PAO. Each component contained branched chains with a 1,2 insertion of a head-to-tail link; a 2,1 insertion of a tail-to-tail link and a methyl-containing linked structure. At a low conversion rate, the reaction rate was related directly with the reaction temperature and the catalyst/1-decene concentration. An apparent kinetic equation for PAO formation was determined during 1-decene polymerization.展开更多
Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 m...Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.展开更多
Poly （ADP-ribose） polymerase-1 （PARP-1） can exacerbate ischemic brain injury and lessen ischemic neuronal death, which may be associated with PARP-1 polymorphisms. The present study investigated human PARP-1 gene ...Poly （ADP-ribose） polymerase-1 （PARP-1） can exacerbate ischemic brain injury and lessen ischemic neuronal death, which may be associated with PARP-1 polymorphisms. The present study investigated human PARP-1 gene polymorphisms in various Chinese nationalities, the results of which could potentially help in the treatment and prevention of neurologic diseases. Genetic polymorphisms of seven exons in the PARP-1 gene, in 898 Chinese Han, Buyi, Shui, Miao, and Zhuang subjects, were investigated by PCR-single-strand conformation polymorphism. A single-strand conformation polymorphism variant in exons 12, 13, 16, and 17 of the PARP-1 gene was identified in 148 people, with two stationary bands showing three degenerative single strands. Results showed that the PARP-1 gene polymorphisms exist in various nationalities, and may act as a biomarker for susceptibility to disease.展开更多
Zinc ions (Zn2+), known to be a novel intracellular second messenger related to various biological functions, have been delivered inside cells. For the intracellular Zn2+ delivery, Zn2+ has been chelated to carboxymet...Zinc ions (Zn2+), known to be a novel intracellular second messenger related to various biological functions, have been delivered inside cells. For the intracellular Zn2+ delivery, Zn2+ has been chelated to carboxymethyl poly(1-vinylimidazole) (CM-PVIm) by mixing zinc chloride (ZnCl2) or zinc acetate (Zn(OAc)2) with CM-PVIm. The resulting Zn2+-chelated CM-PVIm, that is, Zn2+/CM-PVIm complex by mixing ZnCl2 exhibited smaller particle size below 10 nm and possessed larger amount of Zn2+ ions, as compared to the Zn2+/CM-PVIm by mixing Zn(OAc)2. The both Zn2+/CM-PVIm complexes exhibited no significant cytotoxicity, leading to intracellular Zn2+ delivery. The Zn2+/CM-PVIm by mixing ZnCl2 delivered larger amount of intracellular Zn2+ ions than that by mixing Zn(OAc)2. These results suggest that the optimal Zn2+/CM-PVIm complex is a useful tool for intracellular Zn2+ delivery to control various biological functions.展开更多
Experiments including C-13 spin-lattice relaxation, C-13 heteronuclear dipolar dephasing and H-1 spin diffusion are performed on poly (2,6-dimethyl-1,4-phenylene oxide) (PPO). The results show that the rotation of the...Experiments including C-13 spin-lattice relaxation, C-13 heteronuclear dipolar dephasing and H-1 spin diffusion are performed on poly (2,6-dimethyl-1,4-phenylene oxide) (PPO). The results show that the rotation of the methyl groups in solid PPO is partially restricted, which results in a surprisingly efficient spin diffusion between the aromatic proton and methyl proton characterized by a diffusion time of 150 mu s. The results also show that the aromatic ring in solid PPO is rigid and twisted, which causes all aromatic carbons to be chemically unequivalent.展开更多
基金This work was supported by the Deutsche Forschungsgemeinschall and der Chemischen Industrierate, Alexander von Humboldt Stiffeng and the China National Distinguished Young Investigator Fund (No. 29925413).
文摘Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.
文摘The crystallization and crystalline structure of syndiotactic-polypropylene (sPP) and syndiotactic-poly(1-butene) (sPB) blend containing 10 (Bl-10), 25 (Bl-25), 50 (Bl-50), 75 (Bl-75), and 90 (Bl-90) wt% of sPB, have been investigated by means of differential scanning calorimetry (DSC), FT-IR, and wide-angle X-ray diffraction (WAXD) analyses. The melt-crystallization behavior of the blend samples was studied by DSC on the cooling process at constant rates. Bl-50, Bl-75, and Bl-90 showed lower crystallization temperatures than the neat sPP. sPP in Bl-75 showed the lowest crystallization rate among the blend samples. Bl-90 showed a two-phase molten state, and sPP in Bl-90 crystallized via two-stepprocess. Time evolution of FT-IR spectroscopy at room temperature detected conformational transformation of the sPP polymer chain in the blend samples of Bl-50 and Bl-75. The absorption peaks intensity in the FT-IR spectra derived from the helical conformations in the crystalline phase decreased, and the planar zigzag conformations in the amorphous and mesophase phases decreased over the crystallization time. The time evolution of the WAXD profile of Bl-90 indicated that sPP in the blend accelerated the crystallization of sPB. The crystallized Bl-10, Bl-25, and Bl-50 samples showed diffraction peaks in WAXD profiles and melting endothermic peak in DSC profiles derived from only the sPP crystal. The crystallinity and melting temperature of sPP in the crystallized Bl-10, Bl-25, and Bl-50 samples were almost independent of the sPB content. Both the crystalline structure of sPP and sPB were detected in Bl-75 and Bl-90. Bl-75 showed the lowest crystallinity and melting temperature of sPP among the blend samples.
基金supported by PetroChina Company Limited(12-09-01-01)the National Basic Research Program of China(973 Program,2012CB215001)
文摘A series of phosphorus-modified PITQ-13 catalysts was prepared by wet impregnation of NH4H2PO4 solution into an HITQ-13 parent. The catalysts were characterized using XRD, N2 adsorption, MAS NMR and NH3-TPD. Their catalytic performance in 1-butene catalytic cracking was evaluated in a fixed fluidized bed reactor. The results showed that the crystallinity, surface area and pore volume of P-modified PITQ-13 catalysts decreased with the increasing amounts of P. The number of weak acid sites increased, whereas that of strong acidity decreased. The selectivity to propylene in 1-butene cracking reactions increased because of the decrease in strong acidity. The yield of propylene achieved 41.6% over PITQ-13-2 catalyst with a P content of 1.0 wt%, which was 5.1% greater than that achieved over HITQ-13 catalyst.
基金Supported by the National Natural Science Foundation of China(No.21276163,and No.21576168)
文摘Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impact on the adsorption properties. In this study, a novel acidic ionic liquid, 1-butyl-3-(triethoxysilylpropyl)imidazolium hydrogen sulfate(i.e., [BTPIm][HSO_4]), was synthesized and subsequently grafted onto the MCM-36 zeolite for the regulation of its adsorption properties towards isobutane and 1-butene. The resultant [BTPIm][HSO_4]-immobilized MCM-36(i.e., MCM-36-IL) was characterized by FT-IR, XPS, XRD, SEM, TG/DTG and N_2 adsorption–desorption measurement. It was found that the specific surface area, micropore volume and mesopore volume of the MCM-36 support underwent a reduction upon the immobilization of ionic liquid,while the surface density of acid increased from 0.0014 to 0.0035 mmol·m^(-2). The adsorption capacity of isobutane and 1-butene on the MCM-36-IL was determined by a static volumetric method. Results demonstrated that the interaction between isobutane and MCM-36-IL was enhanced and the interaction between 1-butene and MCM-36-IL was reduced. As a result, a tunable adsorption ratio of isobutane/1-butene on MCM-36 was achieved.With the increase in surface density of acid and the tunable adsorption ratio of isobutane and 1-butene on the functionalized MCM-36, the acidic ionic liquid-immobilized zeolites are beneficial to obtain an improved reaction yield and a prolonged catalyst life in the reactions catalyzed by solid acid.
基金the National Natural Science Foundation of China(Grant No.20903088 and 21006104)
文摘Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.
基金supported by the National Natural Science Foundation of China (No.20773120)National 973 Project of China (No.2005CB221403)
文摘A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.
基金This work was in part supported by the Hong Kong Research Grants Council(HKUST6062/98P and DAG96/97 SC11).
文摘While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are carried out in the presence of C_(60) using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecularstructures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C_(60) iscopolymerized with PP. Thus C_(60) plays the dual roles of comonomer and cocatalyst in the polymerizationreaction. C_(60) contents of the copolymers can be easily changed by varying the C_(60) amounts in the feedmixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance issuperior to that of parent C_(60).
基金This work was supported by the National Natural Science Foundation of China (Grant No. 59833120).
文摘Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of themembranes with special asymmetric structure. The preliminary results of gas permeation measurements indicated that the resultant hollow fiber membranes have the potential ability for oxygen/nitrogen separation.
文摘The highly conserved abundant nuclear protein poly （ADP-ribose） polymerase-1 （PARP-1） is activated by DNA damage. PARP-1 activation is associated in DNA repair, cell death and inflammation. Since oxidative stress induced robust DNA damage and wide spread inflamma- tory responses are common pathologies of various CNS diseases, the attention towards PARP-1 as a therapeutic target has been amplifying. This review highlights the multiple roles of PARP- 1 in neurological diseases and po- tential of PARP- 1 inhibitors to enter clinical translation.
基金supported by the Natural Science Foundation of China(21576048)the PetroChina Innovation Foundation(2014D-5006-0503)
文摘Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol system. Gas chromatography–mass spectrometry, proton nuclear magnetic resonance and ^(13) C nuclear magnetic resonance analysis confirmed dimer, trimer and tetramer structures of PAO. Each component contained branched chains with a 1,2 insertion of a head-to-tail link; a 2,1 insertion of a tail-to-tail link and a methyl-containing linked structure. At a low conversion rate, the reaction rate was related directly with the reaction temperature and the catalyst/1-decene concentration. An apparent kinetic equation for PAO formation was determined during 1-decene polymerization.
基金The project is supported by the National Natural Science Foundation of China
文摘Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.
基金the National Natural Science Foundation of China, No. 30972500the Natural Science Foundation of Guangdong Province, No. 7301507
文摘Poly （ADP-ribose） polymerase-1 （PARP-1） can exacerbate ischemic brain injury and lessen ischemic neuronal death, which may be associated with PARP-1 polymorphisms. The present study investigated human PARP-1 gene polymorphisms in various Chinese nationalities, the results of which could potentially help in the treatment and prevention of neurologic diseases. Genetic polymorphisms of seven exons in the PARP-1 gene, in 898 Chinese Han, Buyi, Shui, Miao, and Zhuang subjects, were investigated by PCR-single-strand conformation polymorphism. A single-strand conformation polymorphism variant in exons 12, 13, 16, and 17 of the PARP-1 gene was identified in 148 people, with two stationary bands showing three degenerative single strands. Results showed that the PARP-1 gene polymorphisms exist in various nationalities, and may act as a biomarker for susceptibility to disease.
文摘Zinc ions (Zn2+), known to be a novel intracellular second messenger related to various biological functions, have been delivered inside cells. For the intracellular Zn2+ delivery, Zn2+ has been chelated to carboxymethyl poly(1-vinylimidazole) (CM-PVIm) by mixing zinc chloride (ZnCl2) or zinc acetate (Zn(OAc)2) with CM-PVIm. The resulting Zn2+-chelated CM-PVIm, that is, Zn2+/CM-PVIm complex by mixing ZnCl2 exhibited smaller particle size below 10 nm and possessed larger amount of Zn2+ ions, as compared to the Zn2+/CM-PVIm by mixing Zn(OAc)2. The both Zn2+/CM-PVIm complexes exhibited no significant cytotoxicity, leading to intracellular Zn2+ delivery. The Zn2+/CM-PVIm by mixing ZnCl2 delivered larger amount of intracellular Zn2+ ions than that by mixing Zn(OAc)2. These results suggest that the optimal Zn2+/CM-PVIm complex is a useful tool for intracellular Zn2+ delivery to control various biological functions.
文摘Experiments including C-13 spin-lattice relaxation, C-13 heteronuclear dipolar dephasing and H-1 spin diffusion are performed on poly (2,6-dimethyl-1,4-phenylene oxide) (PPO). The results show that the rotation of the methyl groups in solid PPO is partially restricted, which results in a surprisingly efficient spin diffusion between the aromatic proton and methyl proton characterized by a diffusion time of 150 mu s. The results also show that the aromatic ring in solid PPO is rigid and twisted, which causes all aromatic carbons to be chemically unequivalent.
