A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The sa...A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.展开更多
Functional multiblock poly(ether-b-amide)(PEBA)copolymers,comprised of PA1212(polyamide 1212)as hard segments and Jeffamine ED-2003 as soft segments,were successfully prepared via two-step melt polycondensation withou...Functional multiblock poly(ether-b-amide)(PEBA)copolymers,comprised of PA1212(polyamide 1212)as hard segments and Jeffamine ED-2003 as soft segments,were successfully prepared via two-step melt polycondensation without any amidation catalyst.Here,using diamino-terminated poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide)(PPO-PEO-PPO),Jeffamine ED-2003,enhances the compatibility between polyamide oligomer and polyether,which is better than the traditional route using hydroxyl-terminated polyether.The chemical structure of multiblock PEBAs,as well as the microphase separated structure with crystalline phase of polyamide and polyether,were confirmed by heteronuclear multiple-bond correlation spectrum,heteronuclear multiple quantum correlation spectrum,Fourier transform infrared spectroscopy(FT-IR),differential scanning calorimetry and dynamic mechanical analysis.The hydrophilic PEBA copolymers showed water adsorption ranging from 87.3%to 17.1%depending on the polyether content,and specially showed moisture responsive behavior within seconds when exposed to moisture.The corresponding mechanism was studied using time-resolved attenuated total reflectance FT-IR spectroscopy in the molecular level and the water diffusion coefficient was estimated to be 1.07×10^(–8)cm^(2)∙s^(-1).Two-dimensional correlation FT-IR spectra analysis was performed to confirm that the interaction between water and polyether phase was in preference to that between water and polyamide matrix,and water molecule only forms hydrogen bond with the polyether segment.Due to the incorporation of PEO segments,the PEBAs have the surface resistivity varying from 5.6×10^(9)to 6.5×10^(10)Ω,which makes PEBA potential candidate as permanent antistatic agent.展开更多
Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture ...Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture and conversion of CO_(2)into value-added products,such as cyclic carbonates,is booming.While CO_(2)is an abundant,cheap,non-toxic,and readily accessible Cl feedstock,its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions.In this work,a novel mesoporous poly(ionic liquid)with dual active sites was synthesized through a facile method that involves co-polymerization,post-synthetic metalation,and supercritical CO_(2)drying.Due to a high density of nucleophilic and electrophilic sites,the as-prepared poly(ionic liquid),denoted as P2D-4BrBQA-Zn,offers excellent performance in a CO_(2)cycloaddition reaction using epichlorohydrin as the substrate(98.9%conversion and 96.9%selectivity).Moreover the reaction is carried out under mild,solvent-free,and additive-free conditions.Notably,P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates.Overall,the catalyst is found to have excellent substrate compatibility,stability,and recyclability.展开更多
Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performa...Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.展开更多
In oil and gas field, the application of kinetic hydrate inhibitors (KHIs) independently has remained problematic in high subcooling and high water-cut situation. One feasible method to resolve this problem is the c...In oil and gas field, the application of kinetic hydrate inhibitors (KHIs) independently has remained problematic in high subcooling and high water-cut situation. One feasible method to resolve this problem is the combined use of KHIs and some synergists, which would enhance KHIs’ inhibitory effect on both hydrate nucleation and hydrate crystal growth. In this study, a novel kind of KHI copolymer poly(N-vinyl-2-pyrrolidone-co-2-vinyl pyridine)s (HGs) is used in conjunction with TBAB to show its high performance on hydrate inhibition. The performance of HGs with different monomer ratios in structure II tetrahydrofuran (THF) hydrate is investigated using kinetic hydrate inhibitor evaluation apparatus by step-cooling method and isothermal cooling method. With the combined gas hydrate inhibitor at the concentration of 1.0 wt%, the induction time of 19 wt% THF solution could be prolonged to 8.5 h at a high subcooling of 6℃. Finally, the mechanism of HGs inhibiting the formation of gas hydrate is proposed.展开更多
The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,...The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,1-diphenylethylene (DPE) capped 2-chloro-2,4,4-trimethylpentane (TMPCl) was formed in situ in conjunction with titanium tetrachloride (TiCl(4)). The Lewis acidity of TiCl(4) was decreased by the addition of titanium(IV) isopropoxide (Ti(OiPr)(4)) to accomplish living polymerization of TBDMES. Hydrolysis of poly(TBDMES) in the presence of tetra-butylammonium fluoride yielded poly[4-(2-hydroxyethyl)styrene] (poly(HOES)). FT-IR, NMR and DSC demonstrated the hydrolysis was complete.展开更多
PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing...PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing ammonium persulfate as an oxidant.The results revealed that the poly(aniline-co-2-ethyl aniline)(PANI-EA)copolymer micro/nanostructures exhibited satisfactory anticorrosion performance for carbon steel,and the corrosion protection efficiency increased with the increase of water repellent property.Poly(2-ethyl aniline)(PEA)showed the largest contact angle(CA=145°)and show the best corrosion protection for the carbon steel(h=87.29%).It is found that the superior anticorrosion property of PEA is attributed to its high hydrophobicity,low conductivity and low porosity.展开更多
Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical p...Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and 1H NMR.展开更多
An efficient protocol for the synthesis of N^6-(2-Hydroxyethyl)adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Us...An efficient protocol for the synthesis of N^6-(2-Hydroxyethyl)adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Using water as solvent makes our method eco-friendly and easy to handle with.展开更多
Micro-encapsulated phase-change materials(micro PCMs) with Na_2 HPO_4·12 H_2 O encapsulated in poly(lactic acid)(PLA) shell were prepared by a solvent evaporation–precipitation method that involves the use of a ...Micro-encapsulated phase-change materials(micro PCMs) with Na_2 HPO_4·12 H_2 O encapsulated in poly(lactic acid)(PLA) shell were prepared by a solvent evaporation–precipitation method that involves the use of a coaxial needle. The effects of PLA concentration, stirring speed, injection rate of core and shell solutions, and polyvinyl alcohol(PVA) concentration on phase change properties were investigated. The thermal properties of microP CMs were characterized by differential scanning calorimetry(DSC). The capsules prepared under the optimal conditions are about 2 mm in diameter and show a latent heat of up to 122.2 J·g^(-1).展开更多
Biological bipolar metaplasticities were successfully mimicked in two-dimensional(2D)MoS2 transistors via the implementation of two different MoS2 surface decorations,poly(vinyl alcohol)(PVA)and chitosan bio-polymers....Biological bipolar metaplasticities were successfully mimicked in two-dimensional(2D)MoS2 transistors via the implementation of two different MoS2 surface decorations,poly(vinyl alcohol)(PVA)and chitosan bio-polymers.Interestingly,the depressing metaplasticity was successfully mimicked when the PVA bio-polymer was used as the surface decoration layer,whereas the metaplasticity of long-term potentiation was realized when the chitosan bio-polymer was taken as the surface decoration layer.Furthermore,the electronic band structures of the 2D MoS2 devices with different surface decorations were further investigated using first-principles calculations for understanding the underlying mechanisms of such bipolar metaplasticities.These results will deepen our understanding of metaplasticity,and have great potential in neuromorphic computing applications.展开更多
Poly(2-oxazoline)(POx)has been regarded as a potential candidate for drug delivery carrier to meet the challenges of nanomedicine clinical translation,due to its excellent biocompatibility and self-assembly properties...Poly(2-oxazoline)(POx)has been regarded as a potential candidate for drug delivery carrier to meet the challenges of nanomedicine clinical translation,due to its excellent biocompatibility and self-assembly properties.The drug loading capacity and stability of amphiphilic POxs as drug nanocarriers,however,tend to be insufficient.Herein,we report a strategy to prepare nucleobase-crosslinked POx nanoparticles(NPs)with enhanced stability and ultra-high paclitaxel(PTX)loading capacity for breast cancer therapy.An amphiphilic amine-functionalized POx(PMBEOx-NH_(2))was firstly prepared through a click reaction between cysteamines and vinyl groups in poly(2-methyl-2-oxazoline)-block-poly(2–butyl–2-oxazoline-co-2-butenyl-2-oxazoline)(PMBEOx).Complementary nucleobase-pairs adenine(A)and uracil(U)were subsequently conjugated to PMBEOx-NH2 to give functional POxs(POxA and POxU),respectively.Due to the nucleobase interactions formed between A and U,NPs formed by POxA and POxU at a molar ratio of 1:1 displayed ultrahigh PTX loading capacity(38.2%,PTX/POxA@U),excellent stability,and reduced particle size compared to the uncross-linked PTX-loaded NPs(PTX/PMBEOx).Besides the prolonged blood circulation and enhanced tumor accumulation,the smaller PTX/POxA@U NPs also have better tumor penetration ability compared with PTX/PMBEOx,thus leading to a higher tumor suppression rate in two murine breast cancer models(E0711 and 4T1).These results proved that the therapeutic effect of chemotherapeutic drugs could be improved remarkably through a reasonable optimization of nanocarriers.展开更多
Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were f...Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the similar...展开更多
Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many compo...Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many components and the separation of which is difficult.Therefore,the study on phase equilibrium thermodynamics of bis-2-hydroxyethyl terephthalate(BHET)is of great theoretical significance and practical value to provide basic data for the BHET crystallization separation.In this work,the degraded products were purified and characterized.The solubility of BHET in methanol,ethanol,ethylene glycol,water and the mixture of ethylene glycol+water were determined by static method.The experimental results were correlated with different models,such as ideal solution(IS)model,λh equation,Apelblat equation and NRTL model.Based on the van’t Hoff equation,the mixing Gibbs energy,enthalpy and entropy were calculated.From this work,the basic data which can be used to guide the crystallization process of BHET were obtained,including solubility data,correlation model and thermodynamic properties.展开更多
Nano-SiO2 was modified using silane coupling agent (KH-550) and hyperbranched poly(amine-ester) respectively, and Poly(vinyl chloride) (PVC)/modified nano-SiO2 composites were made by melt-blending. The compos...Nano-SiO2 was modified using silane coupling agent (KH-550) and hyperbranched poly(amine-ester) respectively, and Poly(vinyl chloride) (PVC)/modified nano-SiO2 composites were made by melt-blending. The composites' structures andmechanical properties were characterized by transmission electron microscopy(TEM), sanning electronic microscopy(SEM) and electronic universal testing machine. The results. show that nano-SiO2 grafted by hyperbranched poly (amine-ester) increases obviously in dispersion in PVC matrix, and mechanical properties of PVC are effectively improved. Moreover, it was found that mechanical properties of PVC/nano-SiO2 composites reach the best when weight percent of nano-SiO2 in PVC matrix is 1%. Compared with crude PVC, the tensile strength of hyperbranched poly (amine-ester) grafted nano-SiO2/ PVC composite increases by 24.68 % and its break elongation, flexural strength and impact strength increase by 15.73%, 4.07% and 1 841.84%, respectively. Moreover, the processing of the composites is improved.展开更多
A dye-sensitized TiO2 solid solar cell, which contains poly(4-vinylphenyloxy-methyltriphenylamine) in hole transport layer (HTL) doped with LiSCN and methyl-hexyl-imidazolium iodide (MHIml), was prepared. The solar ce...A dye-sensitized TiO2 solid solar cell, which contains poly(4-vinylphenyloxy-methyltriphenylamine) in hole transport layer (HTL) doped with LiSCN and methyl-hexyl-imidazolium iodide (MHIml), was prepared. The solar cell shows that the conversion efficiency is 0.59%, Jsc is 3.03mA/cm2, and V^ is 0.53V at 1 sun light intensity.展开更多
文摘A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.
基金financially supported by the National Natural Science Foundation of China (21978089 and 21878256)the Fundamental Research Funds for the Central Universities (22221818010)+1 种基金the 111 Project (B20031)the Program of Shanghai Subject Chief Scientist (21XD1433000)
文摘Functional multiblock poly(ether-b-amide)(PEBA)copolymers,comprised of PA1212(polyamide 1212)as hard segments and Jeffamine ED-2003 as soft segments,were successfully prepared via two-step melt polycondensation without any amidation catalyst.Here,using diamino-terminated poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide)(PPO-PEO-PPO),Jeffamine ED-2003,enhances the compatibility between polyamide oligomer and polyether,which is better than the traditional route using hydroxyl-terminated polyether.The chemical structure of multiblock PEBAs,as well as the microphase separated structure with crystalline phase of polyamide and polyether,were confirmed by heteronuclear multiple-bond correlation spectrum,heteronuclear multiple quantum correlation spectrum,Fourier transform infrared spectroscopy(FT-IR),differential scanning calorimetry and dynamic mechanical analysis.The hydrophilic PEBA copolymers showed water adsorption ranging from 87.3%to 17.1%depending on the polyether content,and specially showed moisture responsive behavior within seconds when exposed to moisture.The corresponding mechanism was studied using time-resolved attenuated total reflectance FT-IR spectroscopy in the molecular level and the water diffusion coefficient was estimated to be 1.07×10^(–8)cm^(2)∙s^(-1).Two-dimensional correlation FT-IR spectra analysis was performed to confirm that the interaction between water and polyether phase was in preference to that between water and polyamide matrix,and water molecule only forms hydrogen bond with the polyether segment.Due to the incorporation of PEO segments,the PEBAs have the surface resistivity varying from 5.6×10^(9)to 6.5×10^(10)Ω,which makes PEBA potential candidate as permanent antistatic agent.
基金financial support from the National Natural Science Foundation of China(22078274,21903066)。
文摘Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture and conversion of CO_(2)into value-added products,such as cyclic carbonates,is booming.While CO_(2)is an abundant,cheap,non-toxic,and readily accessible Cl feedstock,its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions.In this work,a novel mesoporous poly(ionic liquid)with dual active sites was synthesized through a facile method that involves co-polymerization,post-synthetic metalation,and supercritical CO_(2)drying.Due to a high density of nucleophilic and electrophilic sites,the as-prepared poly(ionic liquid),denoted as P2D-4BrBQA-Zn,offers excellent performance in a CO_(2)cycloaddition reaction using epichlorohydrin as the substrate(98.9%conversion and 96.9%selectivity).Moreover the reaction is carried out under mild,solvent-free,and additive-free conditions.Notably,P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates.Overall,the catalyst is found to have excellent substrate compatibility,stability,and recyclability.
基金support of the Fundamental Research Funds for the Central Universities(No.2022CDJQY-004)the Fund for Innovative Research Groups of Natural Science Foundation of Hebei Province(No.A2020202002).
文摘Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No. 2009CB219504-03)the National Natural Science Foundation of China (Grant No 51106054)the Colleges and Universities High-level Talents Program of Guangdong
文摘In oil and gas field, the application of kinetic hydrate inhibitors (KHIs) independently has remained problematic in high subcooling and high water-cut situation. One feasible method to resolve this problem is the combined use of KHIs and some synergists, which would enhance KHIs’ inhibitory effect on both hydrate nucleation and hydrate crystal growth. In this study, a novel kind of KHI copolymer poly(N-vinyl-2-pyrrolidone-co-2-vinyl pyridine)s (HGs) is used in conjunction with TBAB to show its high performance on hydrate inhibition. The performance of HGs with different monomer ratios in structure II tetrahydrofuran (THF) hydrate is investigated using kinetic hydrate inhibitor evaluation apparatus by step-cooling method and isothermal cooling method. With the combined gas hydrate inhibitor at the concentration of 1.0 wt%, the induction time of 19 wt% THF solution could be prolonged to 8.5 h at a high subcooling of 6℃. Finally, the mechanism of HGs inhibiting the formation of gas hydrate is proposed.
基金supported by the Beijing Municipal Project for Developing Advanced Human Resources for Higher Education(Elastomers and Biomaterials).
文摘The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,1-diphenylethylene (DPE) capped 2-chloro-2,4,4-trimethylpentane (TMPCl) was formed in situ in conjunction with titanium tetrachloride (TiCl(4)). The Lewis acidity of TiCl(4) was decreased by the addition of titanium(IV) isopropoxide (Ti(OiPr)(4)) to accomplish living polymerization of TBDMES. Hydrolysis of poly(TBDMES) in the presence of tetra-butylammonium fluoride yielded poly[4-(2-hydroxyethyl)styrene] (poly(HOES)). FT-IR, NMR and DSC demonstrated the hydrolysis was complete.
基金financial supports of the National Natural Science Foundation of China (No. 41476059)the Natural Science Foundation of Hebei Province (No. E2018108011)
文摘PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing ammonium persulfate as an oxidant.The results revealed that the poly(aniline-co-2-ethyl aniline)(PANI-EA)copolymer micro/nanostructures exhibited satisfactory anticorrosion performance for carbon steel,and the corrosion protection efficiency increased with the increase of water repellent property.Poly(2-ethyl aniline)(PEA)showed the largest contact angle(CA=145°)and show the best corrosion protection for the carbon steel(h=87.29%).It is found that the superior anticorrosion property of PEA is attributed to its high hydrophobicity,low conductivity and low porosity.
文摘Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and 1H NMR.
基金the National Natural Science Foundation of China(No.20372018)
文摘An efficient protocol for the synthesis of N^6-(2-Hydroxyethyl)adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Using water as solvent makes our method eco-friendly and easy to handle with.
基金Supported by the National Natural Science Foundation of China(21476065)the China National Tobacco Corporation
文摘Micro-encapsulated phase-change materials(micro PCMs) with Na_2 HPO_4·12 H_2 O encapsulated in poly(lactic acid)(PLA) shell were prepared by a solvent evaporation–precipitation method that involves the use of a coaxial needle. The effects of PLA concentration, stirring speed, injection rate of core and shell solutions, and polyvinyl alcohol(PVA) concentration on phase change properties were investigated. The thermal properties of microP CMs were characterized by differential scanning calorimetry(DSC). The capsules prepared under the optimal conditions are about 2 mm in diameter and show a latent heat of up to 122.2 J·g^(-1).
基金Supported by the Central South University Research Fund for Innovation-Driven Program(Grant No.2019CX024)the Natural Science Foundation of Hunan Province(Grant No.2018JJ3652)+1 种基金the China Postdoctoral Science Foundation(Grant Nos.2018M632985 and 2018T110839)the Fundamental Research Funds for the Central Universities of Central South University(Grant No.2018zzts333).
文摘Biological bipolar metaplasticities were successfully mimicked in two-dimensional(2D)MoS2 transistors via the implementation of two different MoS2 surface decorations,poly(vinyl alcohol)(PVA)and chitosan bio-polymers.Interestingly,the depressing metaplasticity was successfully mimicked when the PVA bio-polymer was used as the surface decoration layer,whereas the metaplasticity of long-term potentiation was realized when the chitosan bio-polymer was taken as the surface decoration layer.Furthermore,the electronic band structures of the 2D MoS2 devices with different surface decorations were further investigated using first-principles calculations for understanding the underlying mechanisms of such bipolar metaplasticities.These results will deepen our understanding of metaplasticity,and have great potential in neuromorphic computing applications.
基金financially supported by the National Natural Science Foundation of China (51973215, 52025035, 52103194, 22105199, 51829302)Bureau of International Cooperation Chinese Academy of Science (121522KYSB20200029)the Youth Innovation Promotion Association of Chinese Academy of Sciences (2020232)
文摘Poly(2-oxazoline)(POx)has been regarded as a potential candidate for drug delivery carrier to meet the challenges of nanomedicine clinical translation,due to its excellent biocompatibility and self-assembly properties.The drug loading capacity and stability of amphiphilic POxs as drug nanocarriers,however,tend to be insufficient.Herein,we report a strategy to prepare nucleobase-crosslinked POx nanoparticles(NPs)with enhanced stability and ultra-high paclitaxel(PTX)loading capacity for breast cancer therapy.An amphiphilic amine-functionalized POx(PMBEOx-NH_(2))was firstly prepared through a click reaction between cysteamines and vinyl groups in poly(2-methyl-2-oxazoline)-block-poly(2–butyl–2-oxazoline-co-2-butenyl-2-oxazoline)(PMBEOx).Complementary nucleobase-pairs adenine(A)and uracil(U)were subsequently conjugated to PMBEOx-NH2 to give functional POxs(POxA and POxU),respectively.Due to the nucleobase interactions formed between A and U,NPs formed by POxA and POxU at a molar ratio of 1:1 displayed ultrahigh PTX loading capacity(38.2%,PTX/POxA@U),excellent stability,and reduced particle size compared to the uncross-linked PTX-loaded NPs(PTX/PMBEOx).Besides the prolonged blood circulation and enhanced tumor accumulation,the smaller PTX/POxA@U NPs also have better tumor penetration ability compared with PTX/PMBEOx,thus leading to a higher tumor suppression rate in two murine breast cancer models(E0711 and 4T1).These results proved that the therapeutic effect of chemotherapeutic drugs could be improved remarkably through a reasonable optimization of nanocarriers.
基金This work was financially supported by the China Postdoctoral Science Foundation(No.20060400436)the National Nature Foundation of China(No. 50433010)the National 973 Foundation of China(No.2003CB615705).
文摘Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the similar...
基金financially supported by the National Key Research and Development Program of China(2019YFC1908204)the National Natural Scientific Fund of China(No.21878292,21776289,21908232,21978291)+1 种基金Innovation Academy forGreen Manufacture,Chinese Academy of Sciences(No.IAGM2020C12,IAGM2020C21 and IAGM-2019-A06)K.C.Wong Education Foundation(No.GJTD-2018-04)。
文摘Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many components and the separation of which is difficult.Therefore,the study on phase equilibrium thermodynamics of bis-2-hydroxyethyl terephthalate(BHET)is of great theoretical significance and practical value to provide basic data for the BHET crystallization separation.In this work,the degraded products were purified and characterized.The solubility of BHET in methanol,ethanol,ethylene glycol,water and the mixture of ethylene glycol+water were determined by static method.The experimental results were correlated with different models,such as ideal solution(IS)model,λh equation,Apelblat equation and NRTL model.Based on the van’t Hoff equation,the mixing Gibbs energy,enthalpy and entropy were calculated.From this work,the basic data which can be used to guide the crystallization process of BHET were obtained,including solubility data,correlation model and thermodynamic properties.
基金Sponsored by the Ministerial Level Advanced Research Foundation (120701BQ0126)
文摘Nano-SiO2 was modified using silane coupling agent (KH-550) and hyperbranched poly(amine-ester) respectively, and Poly(vinyl chloride) (PVC)/modified nano-SiO2 composites were made by melt-blending. The composites' structures andmechanical properties were characterized by transmission electron microscopy(TEM), sanning electronic microscopy(SEM) and electronic universal testing machine. The results. show that nano-SiO2 grafted by hyperbranched poly (amine-ester) increases obviously in dispersion in PVC matrix, and mechanical properties of PVC are effectively improved. Moreover, it was found that mechanical properties of PVC/nano-SiO2 composites reach the best when weight percent of nano-SiO2 in PVC matrix is 1%. Compared with crude PVC, the tensile strength of hyperbranched poly (amine-ester) grafted nano-SiO2/ PVC composite increases by 24.68 % and its break elongation, flexural strength and impact strength increase by 15.73%, 4.07% and 1 841.84%, respectively. Moreover, the processing of the composites is improved.
基金supported by The National Natural Science Foundation of China(No.B59883004)partially supported by the Research Institute of Innovative Technology for the Earth(RITE),Japan.
文摘A dye-sensitized TiO2 solid solar cell, which contains poly(4-vinylphenyloxy-methyltriphenylamine) in hole transport layer (HTL) doped with LiSCN and methyl-hexyl-imidazolium iodide (MHIml), was prepared. The solar cell shows that the conversion efficiency is 0.59%, Jsc is 3.03mA/cm2, and V^ is 0.53V at 1 sun light intensity.