Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one ...Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.展开更多
A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,...A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,4-naphthalenedicarboxylic acid with thionyl chloride. The Friedel-Crafts acylation of compound 1 with fluorobenzene afforded compound 2 in a 80% yield. The polycondensation of compound 2 with various bisphenols in tetramethylene sulfone(TMS) in the presence of excess potassium carbonate as a condensation reagent was carried out at 210 ℃ to quantitatively afford the corresponding poly(aryl ether ketone)s(compounds 3_8) containing 1,4-naphthalene moieties. Thermal analyses showed that the polymers have T g values ranging from 496 to 500 K and are thermally stable in air with initial mass loss above 500 ℃. These novel polymers exhibited an excellent solubility in organic solvents including NMP, DMAc, and chloroform, etc. In addition, the glass transition temperatures of these polymers increased and the polymers became insoluble in chloroform after treated at 260 ℃, indicating the occurrence of a thermal crosslinking reaction.展开更多
A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were chara...A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were characterized by FT-IR and H-1-NMR. Some properties of this polymer were described.展开更多
A novel soluble poly(aryl ether ketone) was prepared by the reaction of 4-(3-phenyl-4-hydroxyphenyl)phthalazinone with 4,4'-difluorobenzophenone. The polymer was characterized by DSC, TGA and X-ray diffraction.
A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. ...A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. The polymer was characterized by FTIR, 1HNMR, DSC,TG and X-ray analysis.展开更多
The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. re...The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. reaching a minimum in the nematic state, then slightly increases with further raising the temperature in the biphase.展开更多
A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfone ketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacem...A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfone ketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacement reaction of 4-(4-hydroxylphenyl)- 1 (2H)-phthalazinone with di(4-chlorophenyl) sulfone, 4,4'-difluoro-benzophenone and phenolphthalin in sulfolane in the presence of K2CO3 to produce high molecular weight polymers which can be dissolved in some polar solvents such as chloroform and nitrobenzene at room temperature and can be easily cast into flexible, yellowish and transparent films. PPESK is an amorphous polymer having a decomposition temperature above 400degreesC, which indicates that it has high thermal stability. At the same time, the thermal properties of PPESKs with dicyandiamide (DICY) as curing agent indicated that the heat-resistance properties of the PPESKs are improved after curing. The apparent activation energy (A-E) of the cross-linking reaction and the reaction order (n) of PPESK/DICY were found to be 52.2 kJ/mol and ca. 1.0, respectively. Therefore, the cross-linking reaction is approximately a first order reaction.展开更多
Soluble reacitve copoly (aryl ether ketone ketone) was synthesized from the condensation of 2.2 ' .3.3 ' .6.6 ' -hexaphenyl-4.4 ' -diphenol. 2.2-p-hydroxyphenl 1-tso-propane. and 1-methyl-cyclohex-1-en...Soluble reacitve copoly (aryl ether ketone ketone) was synthesized from the condensation of 2.2 ' .3.3 ' .6.6 ' -hexaphenyl-4.4 ' -diphenol. 2.2-p-hydroxyphenl 1-tso-propane. and 1-methyl-cyclohex-1-ene-4.5-diyl-bis) (4-fluorophenyl methanone). FT-IR. DSC and TGA were used to characterize the novel polymer.展开更多
A novel poly (aryl ether ketone) (PPEK) containing phthalazinone and naphthalene moieties was prepared by the nucleophilic displacement reaction of 4-(4-hydroxyphenyl) (2H) phthalazin-1-one with 1-chloro-4-(4-chlorobe...A novel poly (aryl ether ketone) (PPEK) containing phthalazinone and naphthalene moieties was prepared by the nucleophilic displacement reaction of 4-(4-hydroxyphenyl) (2H) phthalazin-1-one with 1-chloro-4-(4-chlorobenzoyl) naphthalene. The polymer was characterized by FTIR, H-1-NMR, DSC, TGA and WAXD.展开更多
The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N m...The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.展开更多
A new monomer of 4, 4-biphenyl-bis[4-phthalazin-1(2H)-one] was synthesized from biphenyl and phthalic anhydride, and a novel copoly(aryl ether ketone) (PPEK) was synthesized from 2, 2-bis(4-hydroxyphenyl)-propane (BPA...A new monomer of 4, 4-biphenyl-bis[4-phthalazin-1(2H)-one] was synthesized from biphenyl and phthalic anhydride, and a novel copoly(aryl ether ketone) (PPEK) was synthesized from 2, 2-bis(4-hydroxyphenyl)-propane (BPA), 4, 4'-biphenyl-bis-[4-phthalazin-1(2H)-one], 4, 4- difluorodiphenylketone (DFK). The monomer and copolymer were characterized by FT-IR and 1H-NMR. DSC and TGA were used to the novel polymer.展开更多
A new poly (aryl ether ketone) was successfully synthesized by nucleophilic substitution of bis-1,4-(4-chlorobenzoyl) benzene (BCBB) by 1,2-dihydro-4-(4-hydroxy phenyl) (2H)phthatazin-1-one (DHPZ) in appropriate condi...A new poly (aryl ether ketone) was successfully synthesized by nucleophilic substitution of bis-1,4-(4-chlorobenzoyl) benzene (BCBB) by 1,2-dihydro-4-(4-hydroxy phenyl) (2H)phthatazin-1-one (DHPZ) in appropriate condition. The polymer was characterized by FT-IR, H-1-NMR, DSC and TGA etc.展开更多
Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed a...Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed attenuated total reflection Fourier transform infrared(ATR-FTIR)spectroscopy analyses to investigate the diffusion behavior of CH_(2)Cl_(2) in PAEK films with different crystallinities.According to the Fickian diffusion model,the calculated diffu sion coefficients of CH_(2)Cl_(2) in PAEK films were observed to decrease with increasing crystallinity.The effect of CH_(2)Cl_(2)absorption and desorption on the mechanical properties of PAEK films with different crystallinity was further analyzed using tensile tests.The tensile tests exhibited that CH_(2)Cl_(2) has two concurrent effects:plasticization and solvent-induced crystallization.Differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WXRD) techniques further confirmed solvent-induced crystallization behavior.The results would be beneficial to understand the solvent resistance of PAEK materials and consequently provide the practical application conditions of PAEK with a theoretical basis.展开更多
The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Never...The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.展开更多
In the past ten years there has been a flurry of activity in the synthesis of new specialty polymers,largely as a result of the increased need for high technology materials. Interest is mainly shown in two distinctcat...In the past ten years there has been a flurry of activity in the synthesis of new specialty polymers,largely as a result of the increased need for high technology materials. Interest is mainly shown in two distinctcategories of polymers: a) polymers which are used in very small quantities to fulfill critical needs as a part ofdevice systems, and b) high-performance engineering polymers which significantly extend their mechanicaland thermal properties for structural applications. Polyimides and their unparalleled versatility have capturedthe attention and imagination of scientists and engineers. This article describes some of the recent work doneby the author's group on the rational design at the molecular level and the synthesis of polyimides that haveunusual structures and novel properties.展开更多
A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone) (PPEK) was prepared for the boundary lubricant application in micro-electro-mechanical system (MEMS). The synthesis of functionalized PPEK was starte...A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone) (PPEK) was prepared for the boundary lubricant application in micro-electro-mechanical system (MEMS). The synthesis of functionalized PPEK was started from the hydroxylation of PPEK, then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane (GPTMS). The structures of the functional PPEK were confirmed by FTIR, 1H NMR, 29Si NMR, and UV–vis spectrum.展开更多
In this paper, the synthesis and crystallization behavior of poly(ether ether ketone ether ketone) (PEEKEK) are reported. PEEKEK was prepared from 4,4'-bis(p-fluorobenzoyl) diphenyl ether (4,4'-FBDE) and hydro...In this paper, the synthesis and crystallization behavior of poly(ether ether ketone ether ketone) (PEEKEK) are reported. PEEKEK was prepared from 4,4'-bis(p-fluorobenzoyl) diphenyl ether (4,4'-FBDE) and hydroquinone along the nucleophilic substitution route. The thermal properties were investigated by using DSC and TGA. The crystallization behavior of PEEKEK under several conditions, i.e., crystallization from the molten state (melt crystallization), crystallization from a quenched sample (cold crystallization) and crystallization induced by exposing glassy sample to methylene chloride (solvent-induced crystallization) has also been investigated. The results show that crystallization of PEEKEK could be induced by the above methods, and no polymorphism was found. The differences in the crystallization of PEEKEK induced by the above methods are seen in their degree of crystallinity.展开更多
A novel poly (ether sulfone ketone) containing the phthalazinone moiety was prepared by the reaction of 4-)4-hydroxyphenyl) (2H) phthalazin-1-one with activated dichloro-monomers. The polymer was characterized by FT-I...A novel poly (ether sulfone ketone) containing the phthalazinone moiety was prepared by the reaction of 4-)4-hydroxyphenyl) (2H) phthalazin-1-one with activated dichloro-monomers. The polymer was characterized by FT-IR, H-1-NMR, DSC, TGA and X-ray diffraction.展开更多
文摘Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.
基金Supported by the National Natural Science Foundation of China(No.5 0 2 0 30 0 4 )
文摘A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,4-naphthalenedicarboxylic acid with thionyl chloride. The Friedel-Crafts acylation of compound 1 with fluorobenzene afforded compound 2 in a 80% yield. The polycondensation of compound 2 with various bisphenols in tetramethylene sulfone(TMS) in the presence of excess potassium carbonate as a condensation reagent was carried out at 210 ℃ to quantitatively afford the corresponding poly(aryl ether ketone)s(compounds 3_8) containing 1,4-naphthalene moieties. Thermal analyses showed that the polymers have T g values ranging from 496 to 500 K and are thermally stable in air with initial mass loss above 500 ℃. These novel polymers exhibited an excellent solubility in organic solvents including NMP, DMAc, and chloroform, etc. In addition, the glass transition temperatures of these polymers increased and the polymers became insoluble in chloroform after treated at 260 ℃, indicating the occurrence of a thermal crosslinking reaction.
基金This work was supported by the National Natural Science Foundation of China.
文摘A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were characterized by FT-IR and H-1-NMR. Some properties of this polymer were described.
基金This work was supported by the National Natural Science Foundation.
文摘A novel soluble poly(aryl ether ketone) was prepared by the reaction of 4-(3-phenyl-4-hydroxyphenyl)phthalazinone with 4,4'-difluorobenzophenone. The polymer was characterized by DSC, TGA and X-ray diffraction.
文摘A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. The polymer was characterized by FTIR, 1HNMR, DSC,TG and X-ray analysis.
基金the National Advanced Materials Committee of China (NAMCC) is gratefully acknowledged.
文摘The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. reaching a minimum in the nematic state, then slightly increases with further raising the temperature in the biphase.
基金This project was supported by the National Ninth Five-Year-Plan Key Project "The pilot-scale production and the applied development of polyaryl ether concerning phthalazinone moiety" (No. 97-564-01-07).
文摘A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfone ketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacement reaction of 4-(4-hydroxylphenyl)- 1 (2H)-phthalazinone with di(4-chlorophenyl) sulfone, 4,4'-difluoro-benzophenone and phenolphthalin in sulfolane in the presence of K2CO3 to produce high molecular weight polymers which can be dissolved in some polar solvents such as chloroform and nitrobenzene at room temperature and can be easily cast into flexible, yellowish and transparent films. PPESK is an amorphous polymer having a decomposition temperature above 400degreesC, which indicates that it has high thermal stability. At the same time, the thermal properties of PPESKs with dicyandiamide (DICY) as curing agent indicated that the heat-resistance properties of the PPESKs are improved after curing. The apparent activation energy (A-E) of the cross-linking reaction and the reaction order (n) of PPESK/DICY were found to be 52.2 kJ/mol and ca. 1.0, respectively. Therefore, the cross-linking reaction is approximately a first order reaction.
基金We thank the national "Ninth 5-year Plan" key project for the financial support.
文摘Soluble reacitve copoly (aryl ether ketone ketone) was synthesized from the condensation of 2.2 ' .3.3 ' .6.6 ' -hexaphenyl-4.4 ' -diphenol. 2.2-p-hydroxyphenl 1-tso-propane. and 1-methyl-cyclohex-1-ene-4.5-diyl-bis) (4-fluorophenyl methanone). FT-IR. DSC and TGA were used to characterize the novel polymer.
基金Thanks to the "Ninth 5-year Plan" key project of the state.
文摘A novel poly (aryl ether ketone) (PPEK) containing phthalazinone and naphthalene moieties was prepared by the nucleophilic displacement reaction of 4-(4-hydroxyphenyl) (2H) phthalazin-1-one with 1-chloro-4-(4-chlorobenzoyl) naphthalene. The polymer was characterized by FTIR, H-1-NMR, DSC, TGA and WAXD.
文摘The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.
基金This work is sponsored by the National Natural Science Foundation of China (No. 59473901).
文摘A new monomer of 4, 4-biphenyl-bis[4-phthalazin-1(2H)-one] was synthesized from biphenyl and phthalic anhydride, and a novel copoly(aryl ether ketone) (PPEK) was synthesized from 2, 2-bis(4-hydroxyphenyl)-propane (BPA), 4, 4'-biphenyl-bis-[4-phthalazin-1(2H)-one], 4, 4- difluorodiphenylketone (DFK). The monomer and copolymer were characterized by FT-IR and 1H-NMR. DSC and TGA were used to the novel polymer.
文摘A new poly (aryl ether ketone) was successfully synthesized by nucleophilic substitution of bis-1,4-(4-chlorobenzoyl) benzene (BCBB) by 1,2-dihydro-4-(4-hydroxy phenyl) (2H)phthatazin-1-one (DHPZ) in appropriate condition. The polymer was characterized by FT-IR, H-1-NMR, DSC and TGA etc.
基金financially supported by the National Key R&D Program of China (No.2022YFB3709402)。
文摘Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed attenuated total reflection Fourier transform infrared(ATR-FTIR)spectroscopy analyses to investigate the diffusion behavior of CH_(2)Cl_(2) in PAEK films with different crystallinities.According to the Fickian diffusion model,the calculated diffu sion coefficients of CH_(2)Cl_(2) in PAEK films were observed to decrease with increasing crystallinity.The effect of CH_(2)Cl_(2)absorption and desorption on the mechanical properties of PAEK films with different crystallinity was further analyzed using tensile tests.The tensile tests exhibited that CH_(2)Cl_(2) has two concurrent effects:plasticization and solvent-induced crystallization.Differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WXRD) techniques further confirmed solvent-induced crystallization behavior.The results would be beneficial to understand the solvent resistance of PAEK materials and consequently provide the practical application conditions of PAEK with a theoretical basis.
基金supported by the National Natural Science Foundation of China(51978133,52100026,U20A20322,52170151,51978132)the Fundamental Research Funds for the Central Universities of China(2412021QD022)+1 种基金the Key Research and Development Project of Hainan Province(ZDYF2022SHFZ298)the Industrialization Cultivation Project of Jilin Provincial Department of Education(JJKH20221174CY)。
文摘The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.
文摘In the past ten years there has been a flurry of activity in the synthesis of new specialty polymers,largely as a result of the increased need for high technology materials. Interest is mainly shown in two distinctcategories of polymers: a) polymers which are used in very small quantities to fulfill critical needs as a part ofdevice systems, and b) high-performance engineering polymers which significantly extend their mechanicaland thermal properties for structural applications. Polyimides and their unparalleled versatility have capturedthe attention and imagination of scientists and engineers. This article describes some of the recent work doneby the author's group on the rational design at the molecular level and the synthesis of polyimides that haveunusual structures and novel properties.
文摘A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone) (PPEK) was prepared for the boundary lubricant application in micro-electro-mechanical system (MEMS). The synthesis of functionalized PPEK was started from the hydroxylation of PPEK, then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane (GPTMS). The structures of the functional PPEK were confirmed by FTIR, 1H NMR, 29Si NMR, and UV–vis spectrum.
基金This project was financial supported by National Natural Science Foundation of China and the Chinese "863" High Technology Funds.
文摘In this paper, the synthesis and crystallization behavior of poly(ether ether ketone ether ketone) (PEEKEK) are reported. PEEKEK was prepared from 4,4'-bis(p-fluorobenzoyl) diphenyl ether (4,4'-FBDE) and hydroquinone along the nucleophilic substitution route. The thermal properties were investigated by using DSC and TGA. The crystallization behavior of PEEKEK under several conditions, i.e., crystallization from the molten state (melt crystallization), crystallization from a quenched sample (cold crystallization) and crystallization induced by exposing glassy sample to methylene chloride (solvent-induced crystallization) has also been investigated. The results show that crystallization of PEEKEK could be induced by the above methods, and no polymorphism was found. The differences in the crystallization of PEEKEK induced by the above methods are seen in their degree of crystallinity.
文摘A novel poly (ether sulfone ketone) containing the phthalazinone moiety was prepared by the reaction of 4-)4-hydroxyphenyl) (2H) phthalazin-1-one with activated dichloro-monomers. The polymer was characterized by FT-IR, H-1-NMR, DSC, TGA and X-ray diffraction.