2,5-Furandicarboxylic acid（2,5-FDCA） has been regarded as the ideal bio-based alternative to terephthalic acid（TPA）. In recent years, great efforts have been made to synthesize 2,5-FDCA through the following meth...2,5-Furandicarboxylic acid（2,5-FDCA） has been regarded as the ideal bio-based alternative to terephthalic acid（TPA）. In recent years, great efforts have been made to synthesize 2,5-FDCA through the following methods：（1） oxidation of 5-hydroxymethylfurfural（HMF） in the presence of complex biocatalyst or metallic catalyst;（2） conversion of 2-furoic acid via the well-known Henkel Reaction. Herein, a new strategy for the synthesis of 2,5-FDCA from furan and acetic anhydride under mild condition is reported. The purity of the resulted 2,5-FDCA was above 99.9%. Acetic acid and iodoform generated in the reaction were recyclable and no other harmful by-products were detected. The thus-obtained 2,5-FDCA was applied for the preparation of poly（ethylene furandicarboxylate）（PEF） of high quality in terms of high molecular weight and good appearance.展开更多
The objective of this study was to improve the toughness of bio based brittle poly(ethylene 2,5-furandicarboxylate)(PEF)by melt blending with bio based polyamide11(PA11)in the presence of a reactive multifunctional ep...The objective of this study was to improve the toughness of bio based brittle poly(ethylene 2,5-furandicarboxylate)(PEF)by melt blending with bio based polyamide11(PA11)in the presence of a reactive multifunctional epoxy compatibilizer(Joncryl ADR-4368).The morphological,thermal,rheological,and mechanical properties of PEF/PA11 blends were investigated.Compared with neat PEF,the toughness of PEF/PA11 blend was not improved in the absence of the reactive compatibilizer due to the poor compatibility between the two polymers.When Joncryl was incorporated into PEF/PA11 blends,the interfacial tension between PEF and PA11 was obviously reduced,reflecting in the fine average particle size and narrow distribution of PA11 dispersed phase as observed by scanning electron microscopy(SEM).The complex viscosities of PEF/PA11 blends with Joncryl were much higher than that of PEF/PA11 blend,which could be ascribed to the formation of graft copolymers through the epoxy groups of Joncryl reacting with the end groups of PEF and PA11 molecular chains.Thus,the compatibility and interfacial adhesion between PEF and PA11 were greatly improved in the presence of Joncryl.The compatibilized PEF/PA11 blend with 1.5 phr Joncryl exhibited significantly improved elongation at break and unnotch impact strength with values of 90.1%and 30.3kJ/m2,respectively,compared with those of 3.6%and 3.8 kJ/m2 for neat PEF,respectively.This work provides an effective approach to improve the toughness of PEF which may expand its widespread application in packaging.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51373194 and 51503217)National Key Technology Support Program(No.2015BAD15B08)
文摘2,5-Furandicarboxylic acid（2,5-FDCA） has been regarded as the ideal bio-based alternative to terephthalic acid（TPA）. In recent years, great efforts have been made to synthesize 2,5-FDCA through the following methods：（1） oxidation of 5-hydroxymethylfurfural（HMF） in the presence of complex biocatalyst or metallic catalyst;（2） conversion of 2-furoic acid via the well-known Henkel Reaction. Herein, a new strategy for the synthesis of 2,5-FDCA from furan and acetic anhydride under mild condition is reported. The purity of the resulted 2,5-FDCA was above 99.9%. Acetic acid and iodoform generated in the reaction were recyclable and no other harmful by-products were detected. The thus-obtained 2,5-FDCA was applied for the preparation of poly（ethylene furandicarboxylate）（PEF） of high quality in terms of high molecular weight and good appearance.
基金This work was financially supported by the National Natural Science Foundation of China(No.51803224).
文摘The objective of this study was to improve the toughness of bio based brittle poly(ethylene 2,5-furandicarboxylate)(PEF)by melt blending with bio based polyamide11(PA11)in the presence of a reactive multifunctional epoxy compatibilizer(Joncryl ADR-4368).The morphological,thermal,rheological,and mechanical properties of PEF/PA11 blends were investigated.Compared with neat PEF,the toughness of PEF/PA11 blend was not improved in the absence of the reactive compatibilizer due to the poor compatibility between the two polymers.When Joncryl was incorporated into PEF/PA11 blends,the interfacial tension between PEF and PA11 was obviously reduced,reflecting in the fine average particle size and narrow distribution of PA11 dispersed phase as observed by scanning electron microscopy(SEM).The complex viscosities of PEF/PA11 blends with Joncryl were much higher than that of PEF/PA11 blend,which could be ascribed to the formation of graft copolymers through the epoxy groups of Joncryl reacting with the end groups of PEF and PA11 molecular chains.Thus,the compatibility and interfacial adhesion between PEF and PA11 were greatly improved in the presence of Joncryl.The compatibilized PEF/PA11 blend with 1.5 phr Joncryl exhibited significantly improved elongation at break and unnotch impact strength with values of 90.1%and 30.3kJ/m2,respectively,compared with those of 3.6%and 3.8 kJ/m2 for neat PEF,respectively.This work provides an effective approach to improve the toughness of PEF which may expand its widespread application in packaging.
