Efficient fixation of CO_(2) to cyclic carbonates and oxazolidinones with multi-hydroxyl bis-(quaternary ammonium) ionic liquids as catalysts under mild conditions

A series of multi-hydroxyl bis-(quaternary ammonium)ionic liquids(Ils1‒7)was prepared as bifunctional catalysts for the chemical fixation of CO_(2).All these ionic liquid compounds were efficient for the catalytic synthesis of cyclic carbonates and oxazolidinones via the cycloaddition reactions between CO_(2) and epoxides or aziridines with excellent yield and high selectivity in the absence of co-catalyst,metal and solvent.Due to the synergistic effects of hydroxyl groups and halogen anion,the cycloaddition reactions proceeded smoothly either at atmospheric pressure or room temperature.The selectivity for substituted oxazolidinones at 5-and 4-positions can be tuned via changing the reaction conditions.Finally,possible mechanisms including the activation of both CO_(2) and epoxide or aziridines were proposed based on the literatures and experimental results.

Revealing the role and working mechanism of confined ionic liquids in solid polymer composite electrolytes

The confined ionic liquid(IL) in solid polymer composite electrolytes(SCPEs) can improve the performance of lithium metal batteries. However, the impact/role and working mechanism of confined IL in SCPEs remain ambiguous. Herein, IL was immobilized on SiO_(2)(SiO_(2)@IL-C) and then used to prepare the confined SCPEs together with LiTFSI and PEO to study the impacts of confined-IL on the properties and performance of electrolytes and reveal the Li+transport mechanism. The results show that, compared to the IL-unconfined SCPE, the IL-confined ones exhibit better performance of electrolytes and cells, such as higher ionic conductivity, higher t+Li, and wider electrochemical windows, as well as more stable cycle performance, due to the increased dissociation degree of lithium salt and enlarged polymer amorphousness. The finite-element/molecular-dynamics simulations suggest that the IL confined on the SiO_(2) provided an additional Li+transport pathway(Li+→ SiO_(2)@IL-C) that can accelerate ion transfer and alleviate lithium dendrites, leading to ultrastable stripping/plating cycling over 1900 h for the Li/SCPEs/Li symmetric cells. This study demonstrates that IL-confinement is an effective strategy for the intelligent approach of high-performance lithium metal batteries.

Beyond contribution of ionic liquids in nanostructuring polyaniline morphology;its effect on the properties of the polymerization medium

In the present work,the focus has been shifted to the relationship between the PANI morphology and the physicochemical properties,controlled by the amount of added ionic liquids,of the polymerization medium instead of focusing on the structure of the ionic liquids as used to be in the litterature.For that reason,PANI has been synthesized in different weight ratio of[Pyrr][PTS]/water following the standard experimental process.The addition of[Pyrr][PTS]into the polymerization medium controls the morphology of PANI without affecting its structure.Moreover,[Pyrr][PTS]promotes a viscous reaction system without the need of an external source.The viscosity of the polymerization system restricts the diffusion of species that leads to the predominance of the homogeneous nucleation mode during the course of polymerization and,thus,nanostructuring of PANI morphology.As for the ionic conductivity,it reflects the mobility of the ions of the polymerization medium and,thus,the way of its interference with the formed PANI that affects the arrangement and the shape of formed PANI fibers.This relationship between PANI morphology and the physicochemical properties,adjusted by adding ionic liquids,of the polymerization medium is prelaminar and promising.The effect of the ionic liquids on the viscosity as well as on the mobility of the polymerization medium have to be taken into consideration to choose the ionic liquids,which lead to the PANI with desired morphology.

Tuning the cross-linked structure of basic poly(ionic liquid)to develop an efficient catalyst for the conversion of vinyl carbonate to dimethyl carbonate

Dimethyl carbonate(DMC)is a crucial chemical raw material widely used in organic synthesis,lithiumion battery electrolytes,and various other fields.The current primary industrial process employs a conventional sodium methoxide basic catalyst to produce DMC through the transesterification reaction between vinyl carbonate and methanol.However,the utilization of this catalyst presents several challenges during the process,including equipment corrosion,the generation of solid waste,susceptibility to deactivation,and complexities in separation and recovery.To address these limitations,a series of alkaline poly(ionic liquid)s,i.e.[DVBPIL][PHO],[DVCPIL][PHO],and[TBVPIL][PHO],with different crosslinking degrees and structures,were synthesized through the construction of cross-linked polymeric monomers and functionalization.These poly(ionic liquid)s exhibit cross-linked structures and controllable cationic and anionic characteristics.Research was conducted to investigate the effect of the cross-linking degree and structure on the catalytic performance of transesterification in synthesizing DMC.It was discovered that the appropriate cross-linking degree and structure of the[DVCPIL][PHO]catalyst resulted in a DMC yield of up to 80.6%.Furthermore,this catalyst material exhibited good stability,maintaining its catalytic activity after repeated use five times without significant changes.The results of this study demonstrate the potential for using alkaline poly(ionic liquid)s as a highly efficient and sustainable alternative to traditional catalysts for the transesterification synthesis of DMC.

Depolymerization of polyamide 6 in hydrophilic ionic liquids

Polyamide 6 underwent an efficient depolymerization in hydrophilic ionic liquids under microwave irradiation at 300C. The depolymerization completed within 60 min. Caprolactam was readily separated by simple extraction procedure and the ionic liquids were recovered and reused for several times. Addition of catalytic amounts of DMAP(N,N-dimethylaminopyridine) promoted the depolymerization effectively.The present improved procedure provides a method to avoid direct distillation procedure, which consumes energy for the separation of caprolactam from ionic liquids. Although some contamination of ionic liquids was observed, the present procedure provides a new possibility for the use of ionic liquids for plastic chemical recycling from the viewpoint of development of an energy-saving methodology. Use of solubility switchable ionic liquids is also examined to explore a possibility for better separation although depolymerization did not work well.

DESIGN AND SYNTHESIS OF NOVEL CHIRAL IONIC LIQUIDS AND THEIR APPLICATION IN FREE RADICAL POLYMERIZATION OF METHYL METHACRYLATE

Two new chiral ionic liquids, 1 -((-)-menthoxycarbonylmethylene)-3-methylimidazolium hexafluorophosphateand 1-((-)-menthoxycarbonylmethylene)-3-hexadecylimidazolium hexafluorophosphate, were designed an d prepared. Theirchemical structures were characterized by ~1H-NMR. Reverse atom transfer radical polymerization of methyl methacrylate(MMA) in these two ionic liquids was carried out using AIBN/CuCl_2/bipy as the initiating system. The resultant well-definedpolymethyl methacrylate (PMMA) was employed as a macroinitiator to induce the atom transfer radical polymerization ofmenthyl methacrylate (MnMA) in chlorobenzene, which yielded a PMMA-b-PMnMA diblock copolymer with narrow polydispersity.

Polyoxometalate-based silica-supported ionic liquids for heterogeneous oxidative desulfurization in fuels

With the aim of deep desulfurization, silica-supported polyoxometalate-based ionic liquids were successfully prepared by a one-pot hydrothermal process and employed in heterogeneous oxidative desulfurization of various sulfur compounds. The compositions and structures of the hybrid samples were characterized by various methods such as FT-IR, XPS, Raman,UV–Vis, wide-angle XRD and N2adsorption–desorption. The experimental results indicated that the hybrid materials presented a high dispersion of tungsten species and excellent catalytic activity for the removal of 4,6-dimethyldibenzothiophene without any organic solvent as extractant, and the sulfur removal could reach 100.0% under mild conditions.The catalytic performance on various substrates was also investigated in detail. After cycling seven cycles, the sulfur removal of the heterogeneous system still reached 93.0%. The GC-MS analysis results demonstrated that the sulfur compound was first adsorbed by the catalyst and subsequently oxidized to its corresponding sulfone.

Synthesis of polymeric ionic liquids material and application in CO2 adsorption

We synthesized one quaternary ammonium polymeric ionic liquids（PILs）P[VBTHEA]Cl and three imidazolium PILs of P[VEIm]Br, P[VEIm]BF, P[VEIm]PFby free-radical polymerization in solution. These PILs were characterized by FT-IR,H-NMR,C-NMR, TGA, XRD and SEM. Their COadsorption capacities were measured under different pressures and temperatures by constant-volume technique. It was observed that quaternary ammonium PILs of P[VBTHEA]Cl have higher adsorption capacity for COthan those imidazolium PILs, following P[VBTHEA]Cl > P[VEIm]PF> P[VEIm]BF> P[VEIm]Br, which may be ascribed to higher positive charge density on ammonium cation than that on imidazolium cation and thus stronger interaction with CO, consistent with the results from dual-mode adsorption model that ammonium PILs have much higher CObulk absorption than imidazolium PILs. COadsorption capacity of P[VBTHEA]Cl is 9.02 mg/g under 295 K and 1 bar, which is comparable to that of some other PILs, and is much higher than that of the corresponding ILs monomer. These PILs have good adsorption selectivity for COover Nand regeneration efficiency.

Polymeric ionic liquids(PILs)with high acid density:Tunable catalytic performance for biodiesel production

A series of polymeric ionic liquids(PILs)used as effective heterogeneous catalysts for biodiesel production via esterification of free fatty acids(FFAs)were effectively prepared by the reaction of poly(ethylene imine)(PEI)polymers with different molecular weight and 1,3-propanesultone,followed by the further acidification with differential effective acids,i.e.H2SO4,CF3SO3H,CH3SO3H or p-toluenesulfonic acid(p-TSA).Ultrahigh acidity and catalytic performance were achieved and could be fine-tuned by simply adjusting the molecular weight of PEI and by further treatment of acids.Specifically,under the optimal conditions(i.e.reaction temperature was 70℃,reaction time was 2.0 h,catalyst dosage was 3.15%(mass),and alcohol/acid molar ratio was 14:1)acquired through the Box-BEHNKEN response surface methodology,a high oleic acid conversion of 98.42%could be obtained over the optimal PIL,PEI(70000)-PS-p-TSA.Additionally,our PILs also showed high generality for esterification of other FFAs,with general high conversion over 90%noted in each case even under much milder reaction conditions compared to other conventional catalysts.

Synthesis of isosorbide-based polycarbonates via melt polycondensation catalyzed by quaternary ammonium ionic liquids

A series of quaternary ammonium ionic liquids(ILs)were synthesized and employed as catalysts for the production of poly(isosorbide carbonate)(PIC)from diphenyl carbonate and isosorbide via a melt polycondensation process.The relationship between the anions of the ILs and the catalytic activities was investigated,and the readily‐prepared IL tetraethylammonium imidazolate(TEAI)was found to exhibit the highest catalytic activity.After optimizing the reaction conditions,a PIC with a weight‐average molecular weight(Mw)of25600g/mol was obtained,in conjunction with an isosorbide conversion of92%.As a means of modifying the molecular flexibility and thermal properties of the PIC,poly(aliphatic diol‐co‐isosorbide carbonate)s(PAIC)s were successfully synthesized,again using TEAI,and polymers with Mw values ranging from29000to112000g/mol were obtained.13C NMR analyses determined that the PAIC specimens had random microstructures,while differential scanning calorimetry demonstrated that each of the PAICs were amorphous and had glass transition temperatures ranging from50to115°C.Thermogravimetric analyses found Td‐5%values ranging from316to332°C for these polymers.Based on these data,it is evident that the incorporation of linear or cyclohexane‐based diol repeating units changed the thermal properties of the PIC.

A novel ionic liquids grafted polysiloxane for capillary gas chromatography

A new ionic liquids grafted polysiloxane used as stationary phase for capillary gas chromatography （CGC） is described. The stationary phase of 1-vinyl-3-hexylimidazolium hexafluorophosphate anchored to polysiloxane （PMHS-[VHIm][PF6]） was synthe- sized, characterized and coated onto capillary columns by static coating. The results show that the present stationary phase exhibits a very good chromatographic resolution and selectivity for Grob test mixture and alcohols with baseline resolution and symmetry peaks. The present work suggests that novel stationary phase has a great potential for further development and application. 2009 Mei Ling Qi. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Alkylation of Isobutane and Isobutene in Acidic Polyether Ionic Liquids

The Br?nsted-acidic polyether ionic liquids(ILs)with different polymerization degrees(n value)were prepared via the reaction of tetramethylguanidine and epoxy ethane,followed by successive reactions with 1,3-propane sultone and trifluoromethanesulfonic acid(TfOH).The prepared ILs were characterized by infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy,and their thermal stability was determined by thermal gravimetry.The synthesized polyether ILs coupled with TfOH were used to catalyze the alkylation reaction of isobutane and isobutene for the preparation of alkylate gasoline.The polyether ILs could improve the substrate dissolution and promote the separation of the catalyst from the products.The ideal IL(n=94)was determined.The optimized alkylation reaction conditions covered:a VTfOH/VIL ratio of 0.35,a reaction temperature of 40℃,a reaction time of 50 min,and a stirring speed of 800 r/min.The conversion of isobutene was 92.4%and the selectivity for the C8-product was 81.6%.Under optimal conditions,the catalyst life was determined and TfOH showed improved cyclic performance in the polyether ILs.After 8 operating cycles,the catalytic activity of the catalyst showed negligible decline.

Melting points of ionic liquids:Review and evaluation

The melting points of ionic liquids(ILs)reported since 2020 were surveyed,collected,and reviewed,which were further combined with the previous data to provide a database with 3129 ILs ranging from 177.15 to 645.9 K in melting points.In addition,the factors that affect the melting point of ILs from macro,micro,and thermodynamic perspectives were summarized and analyzed.Then the development of the quantitative structure-property relationship(QSPR),group contribution method(GCM),and conductor-like screening model for realistic solvents(COSMO-RS)for predicting the melting points of ILs were reviewed and further analyzed.Combined with the evaluation together with the preliminary study conducted in this work,it shows that COSMO-RS is more promising and possible to further improve its performance,and a framework was thus proposed.

Electrorefining of aluminum in urea-imidazole chloride-aluminum chloride ionic liquids

The electrochemical behavior of Al(Ⅲ)in urea-1-butyl-3-methylimidazolium chloride-aluminum chloride(urea-BMIC-AlCl_(3))ionic liquids,and the effect of potential and temperature on the characterization of cathode products,current efficiency and energy consumption of aluminum electrorefining have been investigated.Cyclic voltammetry showed that the electrochemical reduction of Al(Ⅲ)was a one-step three-electron-transfer irreversible reaction,and the electrochemical reaction was controlled by diffusion.The diffusion coefficient of Al(Ⅲ)in urea-BMIC-AlCl_(3)ionic liquids at 313 K was 1.94×10^(−7)cm^(2)/s.The 7075 aluminum alloy was used as an anode for electrorefining,and the cathode products were analyzed by XRD,SEM and EDS.The results from XRD analysis indicated that the main phase of the cathode products was aluminum.The results from SEM and EDS characterization revealed that the cathode product obtained by electrorefining−1.2 V(vs.Al)was dense and uniform,and the mass fraction of aluminum decreased from 99.61%to 99.10%as the experimental temperature increased from 313 K to 333 K.In this work,the optimum experimental conditions were−1.2 V(vs.Al)and 313 K.At this time,the cathode current efficiency was 97.80%,while the energy consumption was 3.72 kW·h/kg.

Hybrid data-driven and physics-based modeling for viscosity prediction of ionic liquids

Viscosity is one of the most important fundamental properties of fluids.However,accurate acquisition of viscosity for ionic liquids(ILs)remains a critical challenge.In this study,an approach integrating prior physical knowledge into the machine learning(ML)model was proposed to predict the viscosity reliably.The method was based on 16 quantum chemical descriptors determined from the first principles calculations and used as the input of the ML models to represent the size,structure,and interactions of the ILs.Three strategies based on the residuals of the COSMO-RS model were created as the output of ML,where the strategy directly using experimental data was also studied for comparison.The performance of six ML algorithms was compared in all strategies,and the CatBoost model was identified as the optimal one.The strategies employing the relative deviations were superior to that using the absolute deviation,and the relative ratio revealed the systematic prediction error of the COSMO-RS model.The CatBoost model based on the relative ratio achieved the highest prediction accuracy on the test set(R^(2)=0.9999,MAE=0.0325),reducing the average absolute relative deviation(AARD)in modeling from 52.45% to 1.54%.Features importance analysis indicated the average energy correction,solvation-free energy,and polarity moment were the key influencing the systematic deviation.

Highly selective extraction of aromatics from aliphatics by using metal chloride-based ionic liquids

The separation of aromatics from aliphatics is essential for achieving maximum exploitation of oil resources in the petrochemical industry.In this study,a series of metal chloride-based ionic liquids were prepared and their performances in the separation of 1,2,3,4-tetrahydronaphthalene(tetralin)/dodecane and tetralin/decalin systems were studied.Among these ionic liquids,1-ethyl-3-methylimidazolium tetrachloroferrate([EMIM][FeCl_(4)])with the highest selectivity was used as the extractant.Density functional theory calculations showed that[EMIM][FeCl_(4)]interacted more strongly with tetralin than with dodecane and decalin.Energy decomposition analysis of[EMIM][FeCl_(4)]-tetralin indicated that electrostatics and dispersion played essential roles,and induction cannot be neglected.The van der Waals forces was a main effect in[EMIM][FeCl_(4)]-tetralin by independent gradient model analysis.The tetralin distribution coefficient and selectivity were 0.8 and 110,respectively,with 10%(mol)tetralin in the initial tetralin/dodecane system,and 0.67 and 19.5,respectively,with 10%(mol)tetralin in the initial tetralin/decalin system.The selectivity increased with decreasing alkyl chain length of the extractant.The influence of the extraction temperature,extractant dosage,and initial concentrations of the system components on the separation performance were studied.Recycling experiments showed that the regenerated[EMIM][FeCl_(4)]could be used repeatedly.

Impact of ethanol on the flotation efficiency of imidazolium ionic liquids as collectors:Insights from dynamic surface tension and solvation analysis

To conduct extensive research on the application of ionic liquids as collectors in mineral flotation,ethanol(EtOH)was used as a solvent to dissolve hydrophobic ionic liquids(ILs)to simplify the reagent regime.Interesting phenomena were observed in which EtOH exerted different effects on the flotation efficiency of two ILs with similar structures.When EtOH was used to dissolve 1-dodecyl-3-methylimidazolium chloride(C12[mim]Cl)and as a collector for pure quartz flotation tests at a concentration of 1×10^(−5)mol·L^(−1),quartz recovery increased from 23.77%to 77.91%compared with ILs dissolved in water.However,quartz recovery of 1-dodecyl-3-methylim-idazolium hexafluorophosphate(C12[mim]PF6)decreased from 60.45%to 24.52%under the same conditions.The conditional experi-ments under 1×10^(−5)mol·L^(−1)ILs for EtOH concentration and under 2vol%EtOH for ILs concentration confirmed this difference.After being affected by EtOH,the mixed ore flotation tests of quartz and hematite showed a decrease in the hematite concentrate grade and re-covery for the C12[mim]Cl collector,whereas the hematite concentrate grade and recovery for the C12[mim]PF6 collector increased.On the basis of these differences and observations of flotation foam,two-phase bubble observation tests were carried out.The EtOH promoted the foam height of two ILs during aeration.It accelerated static froth defoaming after aeration stopped,and the foam of C12[mim]PF6 de-foaming especially quickly.In the discussion of flotation tests and foam observation,an attempt was made to explain the reasons and mechanisms behind the diverse phenomena using the dynamic surface tension effect and solvation effect results from EtOH.The solva-tion effect was verified through Fourier transform infrared(FT-IR),X-ray photoelectron spectroscopy(XPS),and Zeta potential tests.Al-though EtOH affects the adsorption of ILs on the ore surface during flotation negatively,it holds an positive value of inhibiting foam mer-ging during flotation aeration and accelerating the defoaming of static foam.And induce more robust secondary enrichment in the mixed ore flotation of the C12[mim]PF6 collector,facilitating effective mixed ore separation even under inhibitor-free conditions.

Effects of ionic liquids on the vapor-liquid equilibrium of 1,3,5-trioxane-water system at 101.3 kPa

Increasing the 1,3,5-trioxane(TOX) concentration in the equilibrated vapor phase of TOX-H_(2)O system has been recognized as a challenge for the azeotrope. Ionic liquids(ILs) were used to improve the relative volatility of TOX to H_(2)O and destroy the azeotrope in the TOX-H2O system. The vapor-liquid equilibrium of TOX-H2O system at 101.3 kPa was studied with the addition of 1-butyl-3-methylimidazolium hydrogen sulfate, 1-hexyl-3-methylimidazolium hydrogen sulfate and 1-butyl-3-methylimidazolium nitrate, respectively. The results showed that the volatility of TOX increased with the increase in IL dosage. And the volatility of water decreased with the increase in IL dosage. The relative volatility of TOX to H_(2)O was improved with the increase in ILs dosage. The azeotrope could be destroyed with an IL mole fraction of about 0.10. A non-random two-liquid(NRTL) model was successfully used to correlate the experimental data. The interaction parameters were obtained by fitting the experimental data with the model. The results indicated that a strong interaction existed between ILs and water. The strong interaction improved the volatility of TOX and inhibited the volatility of water, and then intensified the relative volatility of TOX to H_(2)O. The results showed that an ILs with strong polarity and hydrophilicity may be a potential additive to improve the TOX concentration in the equilibrated vapor phase.

Porous polymer microsphere functionalized with benzimidazolium based ionic liquids as effective solid catalysts for esterification

To prepare polymer supported ionic liquids(PSILs)as effective catalysts for esterification,the free radical suspension copolymerization of vinylbenzyl chloride(VBC,monomer),styrene(St,monomer)and divinylbenzene(DVB,crosslinker)with the addition of n-heptane(porogen)was carried out for the fabrication of the porous polymer(PVD)microsphere as support,followed by the immobilization of sulfonic acid-functionalized ionic liquids by the successive treatment of benzimidazole(BIm),1,3-propane sultone and sulfuric acid(H2SO4)or trifluoromethanesulfonic acid(CF3SO3H).The effects of the compositions of DVB and n-heptane on the internal structure of the polymer supports were investigated,and it was found that the support with 40 wt%DVB and 60 wt%n-heptane(with relative to the monomer)could endow the final PSILs with the relatively optimal catalytic performance.The preliminary experiment in the batch reactor indicated that PSILs herein exhibited higher catalytic activities than commercial Amberlyst 46 resin for the esterification of propanoic acid(PROAc)with n-propanol(PROOH).Consequently,the optimal PSILs catalyst,PVD-[Bim-SO3H]HSO4,was selected for further study in the batch reactive distillation column because of low cost and its ease of preparation.The yield of propyl ropionate(PROPRO)could reach up to 97.78%at the optimized conditions of PROOH/PROAc molar ratio(2:1)and catalyst dosage(2.0 wt%).The investigation of the reaction kinetic manifested that the calculated results of second order pseudo-homogeneous kinetic model were in good agreement with experimental values.The pre-exponential factor and activation energy were 4.12×107 L·mol-1·min-1 and 60.57 k J·mol-1,respectively.It is worth noting that the PSILs catalyst could be simply recovered and reused with relatively satisfactory decrease in the catalytic activity,which made it an environmental friendly and promising catalyst in the industrial application.

Design of dual-functional protic porous ionic liquids for boosting selective extractive desulfurization

Porous ionic liquids have demonstrated excellent performance in the field of separation,attributed to their high specific surface area and efficient mass transfer.Herein,task-specific protic porous ionic liquids(PPILs)were prepared by employing a novel one-step coupling neutralization reaction strategy for extractive desulfurization.The single-extraction efficiency of PPILs reached 75.0%for dibenzothiophene.Moreover,adding aromatic hydrocarbon interferents resulted in a slight decrease in the extraction efficiency of PPILs(from 45.2%to 37.3%,37.9%,and 33.5%),indicating the excellent extraction selectivity of PPILs.The experimental measurements and density functional theory calculations reveal that the surface channels of porous structures can selectively capture dibenzothiophene by the stronger electrophilicity(Eint(HS surface channel/DBT)=-39.8 kcal mol^(-1)),and the multiple extraction sites of ion pairs can effectively enrich and transport dibenzothiophene from the oil phase into PPILs throughπ...π,C-H...πand hydrogen bonds interactions.Furthermore,this straightforward synthetic strategy can be employed in preparing porous liquids,offering new possibilities for synthesizing PPILs with tailored functionalities.