Toluene Alkylation with Methanol to p-Xylene over Heteropoly Acids Supported by Clay

The alkylation of toluene with methanol for the selective formation of p-xylene was systematically studied. Very few studies have been reported on the use of superacids such as heteropolyacids on cheap supports, such as clay. This article deals with the use of different heteropoly acids （HPAs）, viz, Dodeca-Tungstophosphoric acid [H3PO4.12WO3.xH2O] （TPA）, Dodeca-Molyhdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P＋aq] （DMAA）, Dodeca-Molyhdo Phosphoric acid （PMA） on clay （MontmoriUonite, K-10） and as such plain clay. This comparative study reveals that 20%PMA/Clay shows 62% toluene conversion and 100% selectivity toward p-xylene.

Toluene Alkylation to Selective Formation of p-Xylene over Co-Crystalline ZSM-12/ZSM-5 Catalyst

The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 （MTW）/ZSM-5 co-crystalline zeolite in 40：60 proportions have been synthesized by the same molar gel composition, but at different temperatures and periods than that of ZSM-12 and ZSM-5, separately. All the prepared samples are characterized by XRD, SEM, BET, and XRF. The activity of toluene alkylation was investigated with a mixture of toluene and methanol as a feed over the ZSM-12, ZSM-12/ZSM-5 co-crystalline, ZSM-5, and physical mixture of ZSM-12/ZSM-5. From characterization, it is observed that the ZSM-12/ZSM-5 co-crystalline material is different from that of ZSM-12, ZSM-5, and their physical mixture. Further, the ZSM-12/ZSM-5 co-crystalline zeolite produces the highest content of xylene and has better selectivity for p-xylene than ZSM-12, ZSM-5, and their physical mixture.

Isobaric Vapor-Liquid Equilibrium of Binary Systems： p-Xylene ＋ （Acetic Acid, Methyl Acetate and n-Propyl Acetate） and Methyl Acetate ＋ n-Propyl Acetate in an Acetic Acid Dehydration Process

The vapor-liquid equilibrium data of four binary systems (acetic acid +p-xylene, methyl acetate +n-propyl acetate, n-propyl acetate +p-xylene and methyl acetate +p-xylene) are measured at 101.33 kPa with Ellis equilibrium still, and then both the NRTL and UNIQUAC models are used in combination with the HOC model for correlating and estimating the vapor-liquid equilibrium of these four binary systems. The estimated binary VLE results using correlated parameters agree well with the measured data except the methyl acetate +p-xylene system which easily causes bumping and liquid rushing out of the sampling tap due to their dramatically different boiling points. The correlation results by NRTL and UNIQUAC models have little difference on the average absolute deviations of temperature and composition of vapor phase, and the results by NRTL model are slightly better than those by UNIQUAC model except for the methyl acetate +n-propyl acetate system, for which the latter gives more accurate correlations.

Kinetics of Burning Side Reaction in the Liquid-phase Oxidation of p-Xylene

During the liquid-phase oxidation of p-xylene,over-oxidation of reactant,intermediates and solvent to carbon dioxide and carbon monoxide is generally known as the burning side reaction.Batch and semi-continuous experiments were carried out,and the experimental data of the burning side reaction were analyzed and reported in this paper.The results showed that the rates of burning side reactions were proportional to the rates of the main reaction,but decreased with the increasing concentrations of reactant and intermediates.The inter-stimulative and competitive relationship between the burning side reaction and the main reaction was confirmed,and the rates of the burning side reaction could be described with some key indexes of the main reaction.According to the mechanism of the side reactions and the kinetics model of main reaction which were proposed and tested in the previous papers,a kinetic model of the burning side reactions involving some key indexes of the main reaction was developed,and the parameters were determined by data fitting of the COx rate curves.The obtained kinetic model could describe the burning side reactions adequately.

Highly Efficient Adsorption of P-Xylene from Aqueous Solutions by Hierarchical Nanoporous Biochar Derived from Crab Shell

The global consumption of p-xylene(PX)for the production of polymers has raised serious concerns about its impact on the environment.As various reports have shown the risks that PX could pose to human health,research into cost-effective remedial methods to remove PX from the environment has gained attraction.In this work,a hierarchical porous crab shell biochar(KCS)was synthesized,characterized,and evaluated for its efficiency to remove PX from aqueous solution.The characterizations of KCS,including the porous structure,surface functional group,phase structure,and surface morphology,were discussed by N_(2) adsorption-desorption,FTIR,XRD,and SEM.Batch adsorption experiments showed that the maximum adsorption capacity of PX on KCS was 393 mg/g within 5 min,larger than most biological/biomass materials,mainly due to the higher specific surface area of 2046 m^(2)/g,and abundant lipophilic functional groups.Subsequent adsorption kinetics study indicated a pseudo-second-order model which implied that the adsorption of PX was due to chemisorption.Thermodynamic parameters showed that the values ofΔH°andΔG°were both negative,indicating that the PX adsorption process on KCS was spontaneous and exothermic.The performance of KCS in delivering a cost-effective,fast,and efficient solution for the removal of PX from aqueous solution would greatly benefit current environmental remediation efforts.

Viscosities of Pure Water, Acetic Acid ＋ Water, and p-Xylene ＋ Acetic Acid ＋ Water at Different Temperature and Pressure

The viscosities of pure water,the acetic acid+water binary system,and the p-xylene+acetic acid+ water ternary system at different concentrations were determined with a rolling-ball viscometer at temperatures from 313.15 to 473.15 K and pressures from 0.10 to 3.20 MPa.The viscosity data were fitted by a correlation equation for the estimation of the mixture viscosities.The average absolute deviations(AAD)of the correlation for binary and ternary systems are 2.48%and 1.77%,respectively.

Modified Self-adaptive Immune Genetic Algorithm for Optimization of Combustion Side Reaction of p-Xylene Oxidation

In recent years, immune genetic algorithm (IGA) is gaining popularity for finding the optimal solution for non-linear optimization problems in many engineering applications. However, IGA with deterministic mutation factor suffers from the problem of premature convergence. In this study, a modified self-adaptive immune genetic algorithm (MSIGA) with two memory bases, in which immune concepts are applied to determine the mutation parameters, is proposed to improve the searching ability of the algorithm and maintain population diversity. Performance comparisons with other well-known population-based iterative algorithms show that the proposed method converges quickly to the global optimum and overcomes premature problem. This algorithm is applied to optimize a feed forward neural network to measure the content of products in the combustion side reaction of p-xylene oxidation, and satisfactory results are obtained.

Renewable p-Xylene Production by Co-catalytic Pyrolysis of Cellulose and Methanol

This work developed a one-step process for renewable p-xylene production by co-catalytic fast pyrolysis (co-CFP) of cellulose and methanol over the different metal oxides modified ZSM5 catalysts. It has been proven that La2O3-modified ZSM5(80) catalyst was an effective one for the production of biobased p-xylene. The selectivity and yield of p-xylene strongly depended on the acidity of the catalysts, reaction temperature, and methanol content. The highest p-xylene yield of 14.5 C-mol% with a p-xylene/xylenes ratio of 86.8% was obtained by the co-CFP of cellulose with 33wt% methanol over 20%La2O3-ZSM5(80) catalyst. The deactivation of the catalysts during the catalytic pyrolysis process was investigated in detail.The reaction pathway for the formation of p-xylene from cellulose was proposed based on the analysis of products and the characterization of catalysts.

Multi-objective optimization of p-xylene oxidation process using an improved self-adaptive differential evolution algorithm

The rise in the use of global polyester fiber contributed to strong demand of the Terephthalic acid （TPA）. The liquid-phase catalytic oxidation of p-xylene （PX） to TPA is regarded as a critical and efficient chemical process in industry [ 1 ]. PX oxidation reaction involves many complex side reactions, among which acetic acid combustion and PX combustion are the most important. As the target product of this oxidation process, the quality and yield of TPA are of great concern. However, the improvement of the qualified product yield can bring about the high energy consumption, which means that the economic objectives of this process cannot be achieved simulta- neously because the two objectives are in conflict with each other. In this paper, an improved self-adaptive multi-objective differential evolution algorithm was proposed to handle the multi-objective optimization prob- lems. The immune concept is introduced to the self-adaptive multi-objective differential evolution algorithm （SADE） to strengthen the local search ability and optimization accuracy. The proposed algorithm is successfully tested on several benchmark test problems, and the performance measures such as convergence and divergence metrics are calculated. Subsequently, the multi-objective optimization of an industrial PX oxidation process is carried out using the proposed immune self-adaptive multi-objective differential evolution algorithm （ISADE）. Optimization results indicate that application oflSADE can greatly improve the yield of TPA with low combustion loss without degenerating TA quality.

High dimension feature extraction based visualized SOM fault diagnosis method and its application in p-xylene oxidation process

Purified terephthalic acid(PTA) is an important chemical raw material. P-xylene(PX) is transformed to terephthalic acid(TA) through oxidation process and TA is refined to produce PTA. The PX oxidation reaction is a complex process involving three-phase reaction of gas, liquid and solid. To monitor the process and to improve the product quality, as well as to visualize the fault type clearly, a fault diagnosis method based on selforganizing map(SOM) and high dimensional feature extraction method, local tangent space alignment(LTSA),is proposed. In this method, LTSA can reduce the dimension and keep the topology information simultaneously,and SOM distinguishes various states on the output map. Monitoring results of PX oxidation reaction process indicate that the LTSA–SOM can well detect and visualize the fault type.

4天香烟烟雾暴露联合poly(I:C)刺激对小鼠肺部免疫应答及干扰素表达的影响

目的:探讨短期香烟烟雾暴露联合poly(I:C)刺激对小鼠肺部免疫应答及干扰素表达的影响。方法:BALB/c小鼠随机分为4组:对照组、熏烟组、poly(I:C)组和熏烟联合poly(I:C)组。检测支气管肺泡灌洗液(BALF)中总细胞数及细胞分类计数;普通光镜下观察各组细胞形态;荧光定量PCR检测肺组织细胞因子、趋化因子和干扰素及干扰素刺激基因表达。结果:与对照组相比,熏烟联合poly(I:C)组总细胞数计数、巨噬细胞与中性粒细胞计数明显升高(P<0.05),且熏烟联合poly(I:C)组巨噬细胞计数高于poly(I:C)组;与poly(I:C)组比较,熏烟联合poly(I:C)组小鼠气道灌洗液巨噬细胞体积较大,呈圆形或不规则形,细胞质较多空泡;与对照组相比,熏烟联合poly(I:C)组小鼠肺组织中性粒细胞趋化因子CXCL1(P<0.05)、CXCL2(P<0.01)和淋巴细胞趋化因子CCL2(P<0.01)mRNA表达升高,肺组织IL-1β、IL-6、TNF-αmRNA表达明显升高(P<0.01),肺组织IFN-β(P<0.01)、IFN-γ(P<0.05)、MX2(P<0.01)和IP-10(P<0.01)表达显著升高,且与poly(I:C)组小鼠相比,熏烟联合poly(I:C)组小鼠肺组织CXCL2(P<0.05)、TNF-α(P<0.01)和IFN-β(P<0.05)mRNA表达明显升高。结论:熏烟联合poly(I:C)诱导了小鼠肺部炎症反应和干扰素及干扰素刺激基因表达。同时,香烟暴露加剧了poly(I:C)诱导的小鼠肺部急性炎症反应和Ⅰ型干扰素表达。

VAPOR-LIQUID EQUILIBRIUM FOR TERNARY MIXTURES OF BENZENE,TOLUENE,AND p-XYLENE

Vapor-liquid equilibrium composition and temperature were measured for binary andternary mixtures of benzene,toluene and p-xylene at 101.33 kPa The equilibrium cell of Boubliketal.was modified for the present study.The experimental vapor-liquid equilibrium data were corre-lated with the Wilson equation.

Density and Excess Molar Volume of Binary Mixtures ofp-Xylene＋Acetic Acid and o-Xylene＋Acetic Acid at Different Temperatures and Pressures

A new apparatus was designed with a thick-walled glass capillary, electric heater tube with red copper and heat preservation. The thick-walled glass capillary was used for its advantages of resistance to acid corrosion and pressure, and ease of observation. The experimental densities over the entire range of mole fraction for the binary mixture of p-xylene＋acetic acid and o-xylene＋acetic acid were measured using the new apparatus at temperatures ranging from 313.15K to 473.15K and pressure ranging from 0.20 to 2,0 MPa. The density values were used in the determination of excess molar volumes, W. The Redlich-Kister equation was used to fit the excess molar volume values, and the coefficients and estimate ot the standard error values were presented. The experimental resuits prove that the density measurement apparatus is successful.

Excess Molar Volumes and Viscosities of Binary Mixtures of p-Xylene with Cyclohexane, n-Heptane, n-Octane, Sulfolane, N-Methyl-2-pyrrolidone and Acetic Acid at 303.15 K and 323.15 K and Atmospheric Pressure

Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these data, the excess molar volume and deviations in viscosity have been calculated. The computed quantities have been fitted to the Redlich-Kister Equation to derive coefficients and estimate the standard error values. Results are discussed in terms of intermolecular interactions.

Effect of CO2 on oxidation of p-xylene in acetic acids/CO2

The oxidation of p-xylene to terephthalic acid with molecular oxygen in acetic acids modified carbon dioxide over Co/Mn/Br catalyst was studied in a batch reactor. The results showed that the oxidation of p-xylene to terephthalic acid was severely inhibited when carbon dioxide exceeded a certain amount, the conversion of p-xylene decreased rapidly from 100.0% to 3.3% and the yield of terephthalic acid dropped from 42.6% to trace. Whereas the oxidation processes of p-Tolualdchyde to p-Toluic acid and 4-Carboxybenzaldehyde to tcrcphthalic acid were improved when a relative small amount of CO2 v/as added, Further investigation found that this negative effect may be caused by multiphase reactions emerging.

Stable Cycling of All-Solid-State Lithium Metal Batteries Enabled by Salt Engineering of PEO-Based Polymer Electrolytes

Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.

Flexible and Robust Functionalized Boron Nitride/Poly(p‑Phenylene Benzobisoxazole)Nanocomposite Paper with High Thermal Conductivity and Outstanding Electrical Insulation

With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.

Design and control of a p-xylene oxidation process

The p-xylene(PX) oxidation process is of great industrial importance because of the strong demand of the global polyester fiber.A steady-state model of the PX oxidation has been studied by many researchers.In our previous work,a novel industrial p-xylene oxidation reactor model using the free radical mechanism based kinetics has been developed.However,the disturbances such as production rate change,feed composition variability and reactor temperature changes widely exist in the industry process.In this paper,dynamic simulation of the PX oxidation reactor was designed by Aspen Dynamics and used to develop an effective plantwide control structure,which was capable of effectively handling the disturbances in the load and the temperature of the reactor.Step responses of the control structure to the disturbances were shown and served as the foundation of the smooth operation and advanced control strategy of this process in our future work.

Innovative approach to boosting the chemical stability of AZ31 magnesium alloy using polymer-modified hybrid metal oxides

Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.

Tuning the cross-linked structure of basic poly(ionic liquid)to develop an efficient catalyst for the conversion of vinyl carbonate to dimethyl carbonate

Dimethyl carbonate(DMC)is a crucial chemical raw material widely used in organic synthesis,lithiumion battery electrolytes,and various other fields.The current primary industrial process employs a conventional sodium methoxide basic catalyst to produce DMC through the transesterification reaction between vinyl carbonate and methanol.However,the utilization of this catalyst presents several challenges during the process,including equipment corrosion,the generation of solid waste,susceptibility to deactivation,and complexities in separation and recovery.To address these limitations,a series of alkaline poly(ionic liquid)s,i.e.[DVBPIL][PHO],[DVCPIL][PHO],and[TBVPIL][PHO],with different crosslinking degrees and structures,were synthesized through the construction of cross-linked polymeric monomers and functionalization.These poly(ionic liquid)s exhibit cross-linked structures and controllable cationic and anionic characteristics.Research was conducted to investigate the effect of the cross-linking degree and structure on the catalytic performance of transesterification in synthesizing DMC.It was discovered that the appropriate cross-linking degree and structure of the[DVCPIL][PHO]catalyst resulted in a DMC yield of up to 80.6%.Furthermore,this catalyst material exhibited good stability,maintaining its catalytic activity after repeated use five times without significant changes.The results of this study demonstrate the potential for using alkaline poly(ionic liquid)s as a highly efficient and sustainable alternative to traditional catalysts for the transesterification synthesis of DMC.