Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. ...Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. On the film we developed poly-crystalline silicon thin film solar cells with efficiency up to 6.05% without anti-reflection coating.展开更多
The heterogeneous free-radical polymerization of methyl methylacrylate (MMA) and divinylbenzene (DVB) as cross-linker within supercritical carbon dioxide-swollen silicon rubber (SR) has been studied as an approach to ...The heterogeneous free-radical polymerization of methyl methylacrylate (MMA) and divinylbenzene (DVB) as cross-linker within supercritical carbon dioxide-swollen silicon rubber (SR) has been studied as an approach to preparing semi-interpenetrating polymer network (semi-IPN) of SR and poly(methyl methylacrylate) (PMMA). The SR/PMMA semi-IPNs were characterized by scanning electron microscopy (SEM) and dynamic mechanical analyzer (DMA).展开更多
In this paper we put forward a new concept about effective trapping center concentration N^e_T which is decreasing with the trapped charge Q corresponding to index movement,based on that,we discuss theⅠ-Ⅴand tempera...In this paper we put forward a new concept about effective trapping center concentration N^e_T which is decreasing with the trapped charge Q corresponding to index movement,based on that,we discuss theⅠ-Ⅴand temperature characteristics of polysilicon resistors.The new concept presents ideal theoretical interpretion for the originally observed current-voltage negative-resistance characteristics of polysilicon resistors formed on the flow sensor,and also for poly-silicon film resistors. The final results agree well with the theoretical current-voltage characteristics.展开更多
The polycondensation of the mixture of diamines 5,5-methylene bis(2-aminophenol) and 4,4-(hexafluoroisopropylidene)dianiline(molar ratio 0.8:0.2) with isophthaloyl dichloride was used to synthesize poly(amido-o-hydrox...The polycondensation of the mixture of diamines 5,5-methylene bis(2-aminophenol) and 4,4-(hexafluoroisopropylidene)dianiline(molar ratio 0.8:0.2) with isophthaloyl dichloride was used to synthesize poly(amido-o-hydroxy amide)(POA-F)-new heat resistant binder of the composites for microelectronics. The copolymer was fractionated, its hydrodynamic, optical, and conformational properties were researched, and molecular masses(ММ) of the fractions were defined. The polydispersity index was estimated. Based on experimental data, calculation of the size of a segment of Kuhn characterizing degree of an intramolecular orientation order and value of coefficients of the equation of Mark-Kuhn-Hauvink for viscometric and diffusion data were performed. It was demonstrated that introducing 20 mol % of the monomer with-CF3-groups does not lead to any changes in conformational properties of the macromolecules and does not change the degree of intramolecular orientational order(the Kuhn segment length). Optical characteristics of POA-F solutions are virtually similar to the corresponding values for POA prepared with the use of single amine-containing component-5,5-methylene bis(2-aminophenol). The received MM distribution for POA-F(prepolymer) provided the solubility of its films in alkaline solutions. The heat resistance(τ5 and τ10-temperatures corresponding to 5% and of 10% PBO-F mass loss of a polymer) of the powders and the films of PBO, PBO-F were determined. The electrophysical parameters-dielectric permittivity(ε) and dielectric loss tangent(tan δ) of the PBO-F films decreased down to 3.30 and 0.017, in comparison 3.40 and 0.025 for PBO respectively.展开更多
The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,...The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,1-diphenylethylene (DPE) capped 2-chloro-2,4,4-trimethylpentane (TMPCl) was formed in situ in conjunction with titanium tetrachloride (TiCl(4)). The Lewis acidity of TiCl(4) was decreased by the addition of titanium(IV) isopropoxide (Ti(OiPr)(4)) to accomplish living polymerization of TBDMES. Hydrolysis of poly(TBDMES) in the presence of tetra-butylammonium fluoride yielded poly[4-(2-hydroxyethyl)styrene] (poly(HOES)). FT-IR, NMR and DSC demonstrated the hydrolysis was complete.展开更多
A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of...A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature （Tg） of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer＇s CH2Cl2 solution. The limiting oxygen index （LOI） of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.展开更多
Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 m...Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.展开更多
Two types of the regular copolymer of poly (1, 4-phenyleneterephthalamide) were synthesized by the low temperature solution polycondensation in NMP-CaCl_2 solvent system, using the piperazine or 2,5-dimethylpiperazine...Two types of the regular copolymer of poly (1, 4-phenyleneterephthalamide) were synthesized by the low temperature solution polycondensation in NMP-CaCl_2 solvent system, using the piperazine or 2,5-dimethylpiperazine as the third components introduced in the main chain of poly (1, 4-phenyleneterephthalamide). The properties of copolymers were characterized by IR, SEM, X-RAY diffraction, polarizing microscopy, TGA and solubilities.Experimental results showed that the copolymers had good solubility and thermal stability, the concentrated sulfuric acid (～98% ) solution of regular PPTA copolymers had liquid crystalline proper-展开更多
Unconsolidated sandstone reservoirs are most susceptible to sand production that leads to a dramatic oil production decline.In this study,the poly(4-vinyl pyridine)(P_(4)VP)incorporated with self-aggregating behavior ...Unconsolidated sandstone reservoirs are most susceptible to sand production that leads to a dramatic oil production decline.In this study,the poly(4-vinyl pyridine)(P_(4)VP)incorporated with self-aggregating behavior was proposed for sand migration control.The P_(4)VP could aggregate sand grains spontaneously throughπ-πstacking interactions to withstand the drag forces sufficiently.The influential factors on the self-aggregating behavior of the P_(4)VP were evaluated by adhesion force test.The adsorption as well as desorption behavior of P_(4)VP on sand grains was characterized by scanning electron microscopy and adhesion force test at different pH conditions.The result indicated that the pH altered the forms of surface silanol groups on sand grains,which in turn affected the adsorption process of P_(4)VP.The spontaneous dimerization of P_(4)VP molecules resulting from theπ-πstacking interaction was demonstrated by reduced density gradient analysis,which contributed to the self-aggregating behavior and the thermally reversible characteristic of the P_(4)VP.Dynamic sand stabilization test revealed that the P_(4)VP showed wide pH and temperature ranges of application.The production of sands can be mitigated effectively at 20-130℃ within the pH range of 4-8.展开更多
Poly（L-lactide-co-caprolactone）（85-15）[P（LLA-CL）（85-15）] was synthesized from high purity L-lactide and e-caprolactone using tin octoate as initiator by ring-opening polymerization, and characterized by infrar...Poly（L-lactide-co-caprolactone）（85-15）[P（LLA-CL）（85-15）] was synthesized from high purity L-lactide and e-caprolactone using tin octoate as initiator by ring-opening polymerization, and characterized by infrared spectrum and IH-NMR spectrum. The synthesized P（LLA-CL）（85-15） is a random copolymer. The influences of polymerization temperature, polymerization time, dosage of initiator and polymerization pressure on the weight average molecular weight and the polydispersity index of P（LLA-CL）（85-15） were investigated. The optimum preparation conditions of P（LLA-CL）（85-15） are： the polymerization pressure is less than 0.5 Pa, the polymerization temperature is 130 ~C, the n（M）/n（I） ratio is 8 000/1, and the polymerization time is 36 h. Under the condition, the weight-average molecular weight of prepared P（LLA-CL）（85-15） is 65.6x 104, and molecular weight distribution coefficient is 1.15.展开更多
Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At ap...Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film展开更多
1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of silicon nitri...1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of silicon nitride bonded silicon carbide bricks.展开更多
Poly (β-carboxyethylmethylsiloxane)-LiClO_4 and poly (β-alkoxylethylmethylsiloxane)-LiClO_4 crosslinked fllms have been prepared. The ionic conductivity of the films depends on the polymer species, concentration of ...Poly (β-carboxyethylmethylsiloxane)-LiClO_4 and poly (β-alkoxylethylmethylsiloxane)-LiClO_4 crosslinked fllms have been prepared. The ionic conductivity of the films depends on the polymer species, concentration of lithium perchlorate, temperature and content of crosslinking agent. The effect of high polar organic solvent 1, 4-butyrolactone on the ionic conductivity and mechanical properties of poly (β-carhoxyethylmethylsiloxane )-LiClO_4 system was also investignied.展开更多
基金This work was supported by the Chinese Academy of Sciences within the Hundred Talent Project(No.99-019-422288)National High Technical Research and Development Programme of China(No.2001AA513060).
文摘Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. On the film we developed poly-crystalline silicon thin film solar cells with efficiency up to 6.05% without anti-reflection coating.
基金This work was supported by the National Natural Science Foundation of China (50173030).
文摘The heterogeneous free-radical polymerization of methyl methylacrylate (MMA) and divinylbenzene (DVB) as cross-linker within supercritical carbon dioxide-swollen silicon rubber (SR) has been studied as an approach to preparing semi-interpenetrating polymer network (semi-IPN) of SR and poly(methyl methylacrylate) (PMMA). The SR/PMMA semi-IPNs were characterized by scanning electron microscopy (SEM) and dynamic mechanical analyzer (DMA).
文摘In this paper we put forward a new concept about effective trapping center concentration N^e_T which is decreasing with the trapped charge Q corresponding to index movement,based on that,we discuss theⅠ-Ⅴand temperature characteristics of polysilicon resistors.The new concept presents ideal theoretical interpretion for the originally observed current-voltage negative-resistance characteristics of polysilicon resistors formed on the flow sensor,and also for poly-silicon film resistors. The final results agree well with the theoretical current-voltage characteristics.
基金Funded by the Ministry of Education and Science of the Russian Federation(No.10.7608.2017/8.9).
文摘The polycondensation of the mixture of diamines 5,5-methylene bis(2-aminophenol) and 4,4-(hexafluoroisopropylidene)dianiline(molar ratio 0.8:0.2) with isophthaloyl dichloride was used to synthesize poly(amido-o-hydroxy amide)(POA-F)-new heat resistant binder of the composites for microelectronics. The copolymer was fractionated, its hydrodynamic, optical, and conformational properties were researched, and molecular masses(ММ) of the fractions were defined. The polydispersity index was estimated. Based on experimental data, calculation of the size of a segment of Kuhn characterizing degree of an intramolecular orientation order and value of coefficients of the equation of Mark-Kuhn-Hauvink for viscometric and diffusion data were performed. It was demonstrated that introducing 20 mol % of the monomer with-CF3-groups does not lead to any changes in conformational properties of the macromolecules and does not change the degree of intramolecular orientational order(the Kuhn segment length). Optical characteristics of POA-F solutions are virtually similar to the corresponding values for POA prepared with the use of single amine-containing component-5,5-methylene bis(2-aminophenol). The received MM distribution for POA-F(prepolymer) provided the solubility of its films in alkaline solutions. The heat resistance(τ5 and τ10-temperatures corresponding to 5% and of 10% PBO-F mass loss of a polymer) of the powders and the films of PBO, PBO-F were determined. The electrophysical parameters-dielectric permittivity(ε) and dielectric loss tangent(tan δ) of the PBO-F films decreased down to 3.30 and 0.017, in comparison 3.40 and 0.025 for PBO respectively.
基金supported by the Beijing Municipal Project for Developing Advanced Human Resources for Higher Education(Elastomers and Biomaterials).
文摘The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene (TBDMES) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) (50/50 V/V) solvent mixture at -80 degrees C. The initiator 1,1-diphenylethylene (DPE) capped 2-chloro-2,4,4-trimethylpentane (TMPCl) was formed in situ in conjunction with titanium tetrachloride (TiCl(4)). The Lewis acidity of TiCl(4) was decreased by the addition of titanium(IV) isopropoxide (Ti(OiPr)(4)) to accomplish living polymerization of TBDMES. Hydrolysis of poly(TBDMES) in the presence of tetra-butylammonium fluoride yielded poly[4-(2-hydroxyethyl)styrene] (poly(HOES)). FT-IR, NMR and DSC demonstrated the hydrolysis was complete.
基金This work was supported by the National Natural Science Foundation of China(No.50203008).
文摘A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature （Tg） of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer＇s CH2Cl2 solution. The limiting oxygen index （LOI） of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.
基金The project is supported by the National Natural Science Foundation of China
文摘Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.
文摘Two types of the regular copolymer of poly (1, 4-phenyleneterephthalamide) were synthesized by the low temperature solution polycondensation in NMP-CaCl_2 solvent system, using the piperazine or 2,5-dimethylpiperazine as the third components introduced in the main chain of poly (1, 4-phenyleneterephthalamide). The properties of copolymers were characterized by IR, SEM, X-RAY diffraction, polarizing microscopy, TGA and solubilities.Experimental results showed that the copolymers had good solubility and thermal stability, the concentrated sulfuric acid (～98% ) solution of regular PPTA copolymers had liquid crystalline proper-
基金support from the National Key R&D Program of China(grant number 2018YFA0702400)the Major Scientific and Technological Projects of CNPC(grant number ZD2019-183-007)the China Postdoctoral Science Foundation(grant number 2021M702041)。
文摘Unconsolidated sandstone reservoirs are most susceptible to sand production that leads to a dramatic oil production decline.In this study,the poly(4-vinyl pyridine)(P_(4)VP)incorporated with self-aggregating behavior was proposed for sand migration control.The P_(4)VP could aggregate sand grains spontaneously throughπ-πstacking interactions to withstand the drag forces sufficiently.The influential factors on the self-aggregating behavior of the P_(4)VP were evaluated by adhesion force test.The adsorption as well as desorption behavior of P_(4)VP on sand grains was characterized by scanning electron microscopy and adhesion force test at different pH conditions.The result indicated that the pH altered the forms of surface silanol groups on sand grains,which in turn affected the adsorption process of P_(4)VP.The spontaneous dimerization of P_(4)VP molecules resulting from theπ-πstacking interaction was demonstrated by reduced density gradient analysis,which contributed to the self-aggregating behavior and the thermally reversible characteristic of the P_(4)VP.Dynamic sand stabilization test revealed that the P_(4)VP showed wide pH and temperature ranges of application.The production of sands can be mitigated effectively at 20-130℃ within the pH range of 4-8.
基金Supported by the National Natural Science Foundation of China (No.20976017)the Technological Project of Hunnan Province(Nos.2010FJ3098 and 2010NK3001)the project funded by Hunnan Province Education Office(No.11C0018)
文摘Poly（L-lactide-co-caprolactone）（85-15）[P（LLA-CL）（85-15）] was synthesized from high purity L-lactide and e-caprolactone using tin octoate as initiator by ring-opening polymerization, and characterized by infrared spectrum and IH-NMR spectrum. The synthesized P（LLA-CL）（85-15） is a random copolymer. The influences of polymerization temperature, polymerization time, dosage of initiator and polymerization pressure on the weight average molecular weight and the polydispersity index of P（LLA-CL）（85-15） were investigated. The optimum preparation conditions of P（LLA-CL）（85-15） are： the polymerization pressure is less than 0.5 Pa, the polymerization temperature is 130 ~C, the n（M）/n（I） ratio is 8 000/1, and the polymerization time is 36 h. Under the condition, the weight-average molecular weight of prepared P（LLA-CL）（85-15） is 65.6x 104, and molecular weight distribution coefficient is 1.15.
文摘Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film
文摘1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of silicon nitride bonded silicon carbide bricks.
文摘Poly (β-carboxyethylmethylsiloxane)-LiClO_4 and poly (β-alkoxylethylmethylsiloxane)-LiClO_4 crosslinked fllms have been prepared. The ionic conductivity of the films depends on the polymer species, concentration of lithium perchlorate, temperature and content of crosslinking agent. The effect of high polar organic solvent 1, 4-butyrolactone on the ionic conductivity and mechanical properties of poly (β-carhoxyethylmethylsiloxane )-LiClO_4 system was also investignied.
