Ultra-high molecular weight polyacrylonitrile (UHMW PAN ) was prepared by aqueous suspension polymerization, and the effect of molecular weight on its rheological behaviors in dimethylsulfoxide (DMSO) and the spinning...Ultra-high molecular weight polyacrylonitrile (UHMW PAN ) was prepared by aqueous suspension polymerization, and the effect of molecular weight on its rheological behaviors in dimethylsulfoxide (DMSO) and the spinning stability were investigated. It shows that,compared with common polyacrylonitrile (C-PAN),UHMW- PAN/DMS0 solution has smaller non- Newtonian index, larger structural viscosity index, much longer maximum relaxation time, and no first- Newtonian region appears in the flow curves under the same experimental conditions. The explanations for these phenomena are given in the view of chain- entanglements. The optimal technology of preparing UHMW-PAN fibers and hollow fiber membranes could be obtained based on the theological study.展开更多
Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage mol...Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.展开更多
Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN（9-borabicyclo-[3.3.1]-nonane） and styrene, in an aqueous sodium dodecyl sulfate（SDS） solution was studied. Ultra-high-molecular-w...Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN（9-borabicyclo-[3.3.1]-nonane） and styrene, in an aqueous sodium dodecyl sulfate（SDS） solution was studied. Ultra-high-molecular-weight（〉 1.0 × 10~7） polystyrene was synthesized using a radical initiator formed through the aerobic oxidation of this alkyl-9-BBN in a high yield（〉 80%）. The kinetics of this emulsion polymerization of styrene with the alkyl-9-BBN was investigated. We confirmed that in the initial stage of the polymerization, the initial reaction rate followed first-order kinetics. The activation energy for this emulsion polymerization of styrene was approximately 56.2 kJ/mol.展开更多
本文合成了五种新型配合茂金属催化剂,并对其进行核磁等表征,然后利用其对乙烯均聚反应进行研究,考察催化剂的活性,并对生成的聚合物进行分子量及分布、动摩擦系数、冲击强度、粒径及其分布的表征。得到的共聚物的分子量较文献报道的有...本文合成了五种新型配合茂金属催化剂,并对其进行核磁等表征,然后利用其对乙烯均聚反应进行研究,考察催化剂的活性,并对生成的聚合物进行分子量及分布、动摩擦系数、冲击强度、粒径及其分布的表征。得到的共聚物的分子量较文献报道的有明显提高。聚合活性最高可达7.8 kg PE/g催化剂·2小时,聚合物的重均分子量最高可达38.5×10^(5)。展开更多
基金This work was supported by Shanghai Natural Science Foundation(98ZF14001)
文摘Ultra-high molecular weight polyacrylonitrile (UHMW PAN ) was prepared by aqueous suspension polymerization, and the effect of molecular weight on its rheological behaviors in dimethylsulfoxide (DMSO) and the spinning stability were investigated. It shows that,compared with common polyacrylonitrile (C-PAN),UHMW- PAN/DMS0 solution has smaller non- Newtonian index, larger structural viscosity index, much longer maximum relaxation time, and no first- Newtonian region appears in the flow curves under the same experimental conditions. The explanations for these phenomena are given in the view of chain- entanglements. The optimal technology of preparing UHMW-PAN fibers and hollow fiber membranes could be obtained based on the theological study.
文摘Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.
文摘Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN（9-borabicyclo-[3.3.1]-nonane） and styrene, in an aqueous sodium dodecyl sulfate（SDS） solution was studied. Ultra-high-molecular-weight（〉 1.0 × 10~7） polystyrene was synthesized using a radical initiator formed through the aerobic oxidation of this alkyl-9-BBN in a high yield（〉 80%）. The kinetics of this emulsion polymerization of styrene with the alkyl-9-BBN was investigated. We confirmed that in the initial stage of the polymerization, the initial reaction rate followed first-order kinetics. The activation energy for this emulsion polymerization of styrene was approximately 56.2 kJ/mol.
文摘本文合成了五种新型配合茂金属催化剂,并对其进行核磁等表征,然后利用其对乙烯均聚反应进行研究,考察催化剂的活性,并对生成的聚合物进行分子量及分布、动摩擦系数、冲击强度、粒径及其分布的表征。得到的共聚物的分子量较文献报道的有明显提高。聚合活性最高可达7.8 kg PE/g催化剂·2小时,聚合物的重均分子量最高可达38.5×10^(5)。
