Synthetic dyes in the aqueous media have been commonly used for textile dyeing, resulting in resource and environmental pressure arising from consumption of water and environmentally unfriendly chemicals. In this stud...Synthetic dyes in the aqueous media have been commonly used for textile dyeing, resulting in resource and environmental pressure arising from consumption of water and environmentally unfriendly chemicals. In this study, an eco-friendly process of dyeing polyamide 6, 6(PA66) fabrics with natural Monascus pigments in decamethylcyclopentasiloxane(D5) solvent has been developed to minimize water consumption and effluent generation. The influence of processing parameters including dyeing temperature, dyebath pH and dyeing time on dyeing effects was explored. It was shown that color strength and color fastness of the samples dyed in D5 media were higher than those of the samples dyed in the aqueous media. Moreover, PA66 fabrics exhibited the highest color strength, good color fastness and a bacteriostatic rate of 53.6% against Staphylococcus aureus when it was dyed at pH of 3.5 and temperature of 80 ℃ for 30 min.展开更多
Polyamide 11 (PA 11) is a widely used polyamide resin, but its application is limited since the impact properties, tensile strength, and thermal properties are not very satisfactory for industrial application. In orde...Polyamide 11 (PA 11) is a widely used polyamide resin, but its application is limited since the impact properties, tensile strength, and thermal properties are not very satisfactory for industrial application. In order to improve the mechanical properties of PA 11, in this paper, the preparation of polyamide 11/clay nanocomposites (PACN) via in-situ intercalated polymerization was reported. SEM, TEM and XRD were employed to investigate the dispersion of clay sheet in the matrix. The results indicate that clay layers were homogeneously dispersed in PA11 matrix on a nano-scale, and an exfoliated and intercalated structure co-existed in the composites. The mechanical and thermal properties of the obtained nanocomposites were improved to certain extent by the addition of clay.展开更多
A new type of inorganic organic biomimetic bone cement consisting of nano hydroxyapatite and polyamide 66 composite was investigated. This cement can be handled as paste and easily shaped into any contour. Nanoapatite...A new type of inorganic organic biomimetic bone cement consisting of nano hydroxyapatite and polyamide 66 composite was investigated. This cement can be handled as paste and easily shaped into any contour. Nanoapatite and polyamide composite cement has a reasonable setting time, excellent washout resistance, high mechanical strength and bioactivity, and it is easily handled and shaped, which can be developed as a clinical cement. It can be predicted that nanoapatite/polymer composite cement would be a new trend of biomedical material, showing a promising prospect.展开更多
Two master-batches,polyamide 66 (PA66)/organo-montmorillonite (OMMT) and polyamide 6 (PA6)/OMMT, prepared by melt compounding with methyl methacrylate (MMA) as co-intercalation agent,have been used to prepare nearly e...Two master-batches,polyamide 66 (PA66)/organo-montmorillonite (OMMT) and polyamide 6 (PA6)/OMMT, prepared by melt compounding with methyl methacrylate (MMA) as co-intercalation agent,have been used to prepare nearly exfoliated PA661montmorillonite (MMT) nanocomposites.The resulting nanocomposites are compared in view of their morphology and properties.Nano-scale dispersion of OMMT is realized in both types of nanocomposites,as revealed by XRD,TEM and Molau tests.PA66/MMT nanocomposites having superior mecha...展开更多
The effects of interfacial modifier on the mechanical properties of kaolin-filled polyamide 6 (PA6) have been studied. The interracial interaction between polyamide 6 and kaolin has been character ized by means of inf...The effects of interfacial modifier on the mechanical properties of kaolin-filled polyamide 6 (PA6) have been studied. The interracial interaction between polyamide 6 and kaolin has been character ized by means of infrared spectroscopy (IR) and scanning electron microscopy (SEM). The results show that the role of the interracial modifier lies in forming an elastic interlayer with good adhesion between kaolin and PA 6. A composite with high impact strength, high tensile strength and high elastic modulus can be obtained by inserting the elastic interfacial modifier into the rigid-particle-filled polymer system.展开更多
The utilization of all-solid-state electrolytes is considered to be an effective way to enhance the safety performance of lithium metal batteries.However,the low ionic conductivity and poor interface compatibility gre...The utilization of all-solid-state electrolytes is considered to be an effective way to enhance the safety performance of lithium metal batteries.However,the low ionic conductivity and poor interface compatibility greatly restrict the development of all-solid-state battery.In this study,a composite electrolyte combining the electrospun polyamide 6(PA6)nanofiber membrane with hierarchical structure and the polyethylene oxide(PEO)polymer is investigated.The introduction of PA6 nanofiber membrane can effectively reduce the crystallinity of the polymer,so that the ionic conductivity of the electrolyte can be enhanced.Moreover,it is found that the presence of finely branched fibers in the hierarchical structure PA6 membrane allows the polar functional groups(C=O and N-H bonds)to be fully exposed,which provides sufficient functional sites for lithium ion transport and helps to regulate the uniform deposition of lithium metal.Moreover,the hierarchical structure can enhance the mechanical strength(9.2 MPa)of the electrolyte,thereby effectively improving the safety and cycle stability of the battery.The prepared Li/Li symmetric battery can be stably cycled for 1500 h under 0.3 mA cm^(-2) and 60℃.This study demonstrates that the prepared electrolyte has excellent application prospects in the next generation all-solid-state lithium metal batteries.展开更多
基金Fujian Provincial Department of Education,China(No.JAT190528)Quanzhou Science and Technology Project,China(No.2019C014R)。
文摘Synthetic dyes in the aqueous media have been commonly used for textile dyeing, resulting in resource and environmental pressure arising from consumption of water and environmentally unfriendly chemicals. In this study, an eco-friendly process of dyeing polyamide 6, 6(PA66) fabrics with natural Monascus pigments in decamethylcyclopentasiloxane(D5) solvent has been developed to minimize water consumption and effluent generation. The influence of processing parameters including dyeing temperature, dyebath pH and dyeing time on dyeing effects was explored. It was shown that color strength and color fastness of the samples dyed in D5 media were higher than those of the samples dyed in the aqueous media. Moreover, PA66 fabrics exhibited the highest color strength, good color fastness and a bacteriostatic rate of 53.6% against Staphylococcus aureus when it was dyed at pH of 3.5 and temperature of 80 ℃ for 30 min.
基金We would like to express our heartfelt thanks to the China National Distinguished Young Investigator Fund(No. 29925413) and the National Natural Science Foundation of China (No. 20274028) for Financial Support.
文摘Polyamide 11 (PA 11) is a widely used polyamide resin, but its application is limited since the impact properties, tensile strength, and thermal properties are not very satisfactory for industrial application. In order to improve the mechanical properties of PA 11, in this paper, the preparation of polyamide 11/clay nanocomposites (PACN) via in-situ intercalated polymerization was reported. SEM, TEM and XRD were employed to investigate the dispersion of clay sheet in the matrix. The results indicate that clay layers were homogeneously dispersed in PA11 matrix on a nano-scale, and an exfoliated and intercalated structure co-existed in the composites. The mechanical and thermal properties of the obtained nanocomposites were improved to certain extent by the addition of clay.
文摘A new type of inorganic organic biomimetic bone cement consisting of nano hydroxyapatite and polyamide 66 composite was investigated. This cement can be handled as paste and easily shaped into any contour. Nanoapatite and polyamide composite cement has a reasonable setting time, excellent washout resistance, high mechanical strength and bioactivity, and it is easily handled and shaped, which can be developed as a clinical cement. It can be predicted that nanoapatite/polymer composite cement would be a new trend of biomedical material, showing a promising prospect.
文摘Two master-batches,polyamide 66 (PA66)/organo-montmorillonite (OMMT) and polyamide 6 (PA6)/OMMT, prepared by melt compounding with methyl methacrylate (MMA) as co-intercalation agent,have been used to prepare nearly exfoliated PA661montmorillonite (MMT) nanocomposites.The resulting nanocomposites are compared in view of their morphology and properties.Nano-scale dispersion of OMMT is realized in both types of nanocomposites,as revealed by XRD,TEM and Molau tests.PA66/MMT nanocomposites having superior mecha...
基金The project was supported by National Natural Science Foundation of China
文摘The effects of interfacial modifier on the mechanical properties of kaolin-filled polyamide 6 (PA6) have been studied. The interracial interaction between polyamide 6 and kaolin has been character ized by means of infrared spectroscopy (IR) and scanning electron microscopy (SEM). The results show that the role of the interracial modifier lies in forming an elastic interlayer with good adhesion between kaolin and PA 6. A composite with high impact strength, high tensile strength and high elastic modulus can be obtained by inserting the elastic interfacial modifier into the rigid-particle-filled polymer system.
基金the National Natural Science Foundation of China(51973157,51673148 and 51678411),Chinathe China Postdoctoral Science Foundation Grant(2019 M651047),Chinathe Science and Technology Plans of Tianjin(No.17PTSYJC00040 and 18PTSYJC00180),China for the financial support。
文摘The utilization of all-solid-state electrolytes is considered to be an effective way to enhance the safety performance of lithium metal batteries.However,the low ionic conductivity and poor interface compatibility greatly restrict the development of all-solid-state battery.In this study,a composite electrolyte combining the electrospun polyamide 6(PA6)nanofiber membrane with hierarchical structure and the polyethylene oxide(PEO)polymer is investigated.The introduction of PA6 nanofiber membrane can effectively reduce the crystallinity of the polymer,so that the ionic conductivity of the electrolyte can be enhanced.Moreover,it is found that the presence of finely branched fibers in the hierarchical structure PA6 membrane allows the polar functional groups(C=O and N-H bonds)to be fully exposed,which provides sufficient functional sites for lithium ion transport and helps to regulate the uniform deposition of lithium metal.Moreover,the hierarchical structure can enhance the mechanical strength(9.2 MPa)of the electrolyte,thereby effectively improving the safety and cycle stability of the battery.The prepared Li/Li symmetric battery can be stably cycled for 1500 h under 0.3 mA cm^(-2) and 60℃.This study demonstrates that the prepared electrolyte has excellent application prospects in the next generation all-solid-state lithium metal batteries.
