In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form po...In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form polycarbonate part. But the wall thickness distribution of the bulged specimen by this method is not so even.展开更多
Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) ...Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) are unevenly dispersed in the continuous PC-rich phase and there is no phase-inversion as PPSQ(A) content increases when the percentage of PPSQ(A) is not more than 70%. PPSQ(B)-rich spheres are evenly dispersed in the continuous phase (PC-rich) and phase-inversion occurs when PPSQ(B) percentage is up to 70%. T-g of PPSQ(A)/PC or PPSQ(B)/PC at some compositions are lower than that of pure PC due to the enlarged free-volume of PC-rich phase because some spheres of rigid PPSQ chains are included in the PC-rich phase. PC and PPSQ(A) or PPSQ(B) are partially compatible. The compatibility of PC and PPSQ(B) is better than that of PC and PPSQ(A) with high M-w and good ladderlike regularity. Heat history has some influence on the T(g)s and compatibility of PPSQ(A)/PC and PPSQ(B)/PC blends.展开更多
This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrome...This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrometer,a differential scanning calorimeter,a scanning electron microscope and a dynamic viscoelastometer.The results show that PCPU EP blends have excellent resistance to hydrolysis and mechanical properties at the ratio of PCPU to EP equal to 10/100 (wt/wt).展开更多
为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒...为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。展开更多
A new degradable aliphatic poly(butylene-co-e-caprolactone carbonate) (PBCL) was synthesized through the terpolymerization of carbon dioxide, 1,2-butylene oxide (BO) and e-caprolactone (CL), a polymer supported bimeta...A new degradable aliphatic poly(butylene-co-e-caprolactone carbonate) (PBCL) was synthesized through the terpolymerization of carbon dioxide, 1,2-butylene oxide (BO) and e-caprolactone (CL), a polymer supported bimetallic complex (PBM) was used as a catalyst. The terpolymers prepared were characterized by FT-IR,1H NMR, 13C NMR, WXRD and DSC. The hydrolysis tests were carried out to appraise the degradability of the copolymers.展开更多
A series of quaternary ammonium ionic liquids(ILs)were synthesized and employed as catalysts for the production of poly(isosorbide carbonate)(PIC)from diphenyl carbonate and isosorbide via a melt polycondensation proc...A series of quaternary ammonium ionic liquids(ILs)were synthesized and employed as catalysts for the production of poly(isosorbide carbonate)(PIC)from diphenyl carbonate and isosorbide via a melt polycondensation process.The relationship between the anions of the ILs and the catalytic activities was investigated,and the readily‐prepared IL tetraethylammonium imidazolate(TEAI)was found to exhibit the highest catalytic activity.After optimizing the reaction conditions,a PIC with a weight‐average molecular weight(Mw)of25600g/mol was obtained,in conjunction with an isosorbide conversion of92%.As a means of modifying the molecular flexibility and thermal properties of the PIC,poly(aliphatic diol‐co‐isosorbide carbonate)s(PAIC)s were successfully synthesized,again using TEAI,and polymers with Mw values ranging from29000to112000g/mol were obtained.13C NMR analyses determined that the PAIC specimens had random microstructures,while differential scanning calorimetry demonstrated that each of the PAICs were amorphous and had glass transition temperatures ranging from50to115°C.Thermogravimetric analyses found Td‐5%values ranging from316to332°C for these polymers.Based on these data,it is evident that the incorporation of linear or cyclohexane‐based diol repeating units changed the thermal properties of the PIC.展开更多
The miscibility,mechanical properties,morphology and toughening mechanism of PC/PBA-PMMA blends wereinvestigated.The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacialad...The miscibility,mechanical properties,morphology and toughening mechanism of PC/PBA-PMMA blends wereinvestigated.The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacialadhesion.The Izod impact strength of blend PC/PBA-PMMA with 4%(volume fraction)PBA-PMMA core-shell modifier is16 times higher than that of pure PC.The core-shell volume fraction and thickness of the PMMA shell have effect on thetoughness of PC/PBA-PMMA blends.As PMMA volume fraction increases,the toughness of PC/PBA-PMMA blendincreases,and reaches a maximum value at 30% volume fraction of PMMA or so.The tensile properties of PC/PBA-PMMAblend with a minimum amount of PBA-PMMA modifier show that brittle-tough transition has no significant variance incomparison with that of pure PC.The scanning electron microscopic(SEM)observation indicates that the tougheningmechanism of the blend with the pseudo-ductile matrix modified by small core-shell latex polymer particles is the synergeticeffect of cavitation and shear yielding of the matrix.展开更多
文摘In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form polycarbonate part. But the wall thickness distribution of the bulged specimen by this method is not so even.
基金This work was supported by Fund of Head of College of Chemistry,Shandong University.
文摘Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) are unevenly dispersed in the continuous PC-rich phase and there is no phase-inversion as PPSQ(A) content increases when the percentage of PPSQ(A) is not more than 70%. PPSQ(B)-rich spheres are evenly dispersed in the continuous phase (PC-rich) and phase-inversion occurs when PPSQ(B) percentage is up to 70%. T-g of PPSQ(A)/PC or PPSQ(B)/PC at some compositions are lower than that of pure PC due to the enlarged free-volume of PC-rich phase because some spheres of rigid PPSQ chains are included in the PC-rich phase. PC and PPSQ(A) or PPSQ(B) are partially compatible. The compatibility of PC and PPSQ(B) is better than that of PC and PPSQ(A) with high M-w and good ladderlike regularity. Heat history has some influence on the T(g)s and compatibility of PPSQ(A)/PC and PPSQ(B)/PC blends.
文摘This paper studies the structure and properties of the polycarbonate polyurethane epoxy resin (PCPU EP) blends being resistant to hydrolysis.The samples were analyzed by an infrared spectrometer,a differential scanning calorimeter,a scanning electron microscope and a dynamic viscoelastometer.The results show that PCPU EP blends have excellent resistance to hydrolysis and mechanical properties at the ratio of PCPU to EP equal to 10/100 (wt/wt).
文摘为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。
文摘A new degradable aliphatic poly(butylene-co-e-caprolactone carbonate) (PBCL) was synthesized through the terpolymerization of carbon dioxide, 1,2-butylene oxide (BO) and e-caprolactone (CL), a polymer supported bimetallic complex (PBM) was used as a catalyst. The terpolymers prepared were characterized by FT-IR,1H NMR, 13C NMR, WXRD and DSC. The hydrolysis tests were carried out to appraise the degradability of the copolymers.
基金supported by the National Key Projects for Fundamental Research and Development of China(2016YFB0600903)the National Natural Science Foundation of China(91434107,21506226,21476245)the Key Research Program of Frontier Sciences of Chinese Academy of Sciences(QYZDY-SSW-JSC011)~~
文摘A series of quaternary ammonium ionic liquids(ILs)were synthesized and employed as catalysts for the production of poly(isosorbide carbonate)(PIC)from diphenyl carbonate and isosorbide via a melt polycondensation process.The relationship between the anions of the ILs and the catalytic activities was investigated,and the readily‐prepared IL tetraethylammonium imidazolate(TEAI)was found to exhibit the highest catalytic activity.After optimizing the reaction conditions,a PIC with a weight‐average molecular weight(Mw)of25600g/mol was obtained,in conjunction with an isosorbide conversion of92%.As a means of modifying the molecular flexibility and thermal properties of the PIC,poly(aliphatic diol‐co‐isosorbide carbonate)s(PAIC)s were successfully synthesized,again using TEAI,and polymers with Mw values ranging from29000to112000g/mol were obtained.13C NMR analyses determined that the PAIC specimens had random microstructures,while differential scanning calorimetry demonstrated that each of the PAICs were amorphous and had glass transition temperatures ranging from50to115°C.Thermogravimetric analyses found Td‐5%values ranging from316to332°C for these polymers.Based on these data,it is evident that the incorporation of linear or cyclohexane‐based diol repeating units changed the thermal properties of the PIC.
基金This work was supported by the National Natural Science Foundation of China(Nos.5030301750373044+8 种基金50253002500730242007403720490220503900905002700120023003)the Special Funds for Major State Basic Research Projects(No.2003CB615600)the Chi
文摘The miscibility,mechanical properties,morphology and toughening mechanism of PC/PBA-PMMA blends wereinvestigated.The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacialadhesion.The Izod impact strength of blend PC/PBA-PMMA with 4%(volume fraction)PBA-PMMA core-shell modifier is16 times higher than that of pure PC.The core-shell volume fraction and thickness of the PMMA shell have effect on thetoughness of PC/PBA-PMMA blends.As PMMA volume fraction increases,the toughness of PC/PBA-PMMA blendincreases,and reaches a maximum value at 30% volume fraction of PMMA or so.The tensile properties of PC/PBA-PMMAblend with a minimum amount of PBA-PMMA modifier show that brittle-tough transition has no significant variance incomparison with that of pure PC.The scanning electron microscopic(SEM)observation indicates that the tougheningmechanism of the blend with the pseudo-ductile matrix modified by small core-shell latex polymer particles is the synergeticeffect of cavitation and shear yielding of the matrix.
