At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional...At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.展开更多
The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specim...The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.展开更多
In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the frac...In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the fracture surfaces of filaments were studied by scanning electron microscopy（SEM）.The properties of composite filament,such as orientation degree,mechanical properties,and surface friction properties,were analyzed.The thermal performances of composite filament were analyzed by differential scanning calorimetry（DSC） and thermo gravimetric analysis（TGA）.The results showed that the nano-SiO_2 modified by 5% KH-550 could disperse evenly and loosely in nano-scale,and 1 wt% and 3 wt% nano-SiO_2 dispersed throughout PLA evenly.As the quantity of nano-SiO_2 increased,the properties of composite filament,such as orientation degree,friction coefficient,thermal decomposition temperature,and glass transition temperature,increased more or less.The breaking tenacity increased when 1 wt% SiO_2 was added in PLA,but declined when 3 wt% SiO_2 was added.展开更多
In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The res...In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The results showed that the nano-SiO2 modified by 3% coupling agent KH-570 could be dispersed evenly in PLA in small scale. The thermal decomposition temperature of composite master batches increased by 6. 20-10. 80 ℃, the glass transition temperature increased by 0. 22-5. 16 ℃,and the heat enthalpy at the glass transition temperature increased by 0. 574-2. 437 J /g,compared with pure PLA. The composite master batch possessed superior thermal stability and heat resistance.展开更多
With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fibe...With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fiber”,not only has moisture absorption,air permeability,and good mechanical properties but also has many health-related advantages such as antibacterial properties.In this study,four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA)composites were fabricated.Mechanical and thermal properties of the composites were tested and analyzed.The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites,the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3%and 60.1%,respectively.In comparison,the bending strength and the bending modulus were decreased by 21.8%and 7.6%,respectively.Moreover,compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites,the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties.The after-fracture morphology was detected by a scanning electron microscope(SEM).The thermal properties of the composites were also characterized.It was found that the thermal properties of the four types of composites showed very similar behaviors.展开更多
Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier ...Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier properties. PLA with good flowability and easy processing was selected. The mechanical properties and barrier properties of the graphene-based composites were improved by the use of PLA for good flowability, making it easy to enter the GO layer as a binder. Three methods of preparation of GO/PLA homogeneous composite membranes were designed by vacuum filtration. The experimental results show that the injection of PLA as a molecular binder into the GO layer can effectively mimic the nano-structure, and enhance the intergranular force of the graphene molecules and the compatibility with the polymer matrix.展开更多
The aim of this work was to use cellulose nanocrystals that were obtained by hydrolysis in phosphoric acid solution and further modified with succinic anhydride in the microwave field for PLA reinforcement.A series of...The aim of this work was to use cellulose nanocrystals that were obtained by hydrolysis in phosphoric acid solution and further modified with succinic anhydride in the microwave field for PLA reinforcement.A series of allbionanocomposites containing unmodified and surface modified cellulose nanocrystals with CNC content in the range of 1–3%_(w.t.) were obtained by melt blending and tested by XRD,SEM,DSC and DMA to investigate the effect of surface esterification of CNCs on the structure,morphology,dynamic mechanical properties of bionanocomposites,as well as phase transitions of PLA in the presence of cellulosic nanofiller.DMA investigations showed the highest increase of storage modulus by ca.7%(335 MPa at 25℃)in the glassy state of PLA for 2%_(w.t.)of unmodified CNC.Though,addition of 2%_(w.t.)of succinylated CNCs caused the highest increase of the onset of glass transition temperature(by 6.2℃)thus widening the temperature range of biocomposite application.The increase of glass transition temperature indicates the strongest interfacial interactions due to improved miscibility of surface modified nanocrystals and thus good dispersion of additive in PLA matrix providing high interface.展开更多
A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylacti...A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylactic acid(PLA)-coated Fe3O4 nanoparticles.The diameter of nanocarrier is 30-50 nm by transmission electron micrograph(TEM).The encapsulation efficiency of photosensitizer is 27.98% calculated from UV-vis absorption spectra.The nanocarrier shows obvious photocytotoxic activity to Hela299 tumor cells in vitro.展开更多
A new entire biodegradable scaffold has been developed which does not require precelluiarization before transplantation. This new kind of vascular scaffold prototype made from porous poly- e-caprolactone （PCL） membr...A new entire biodegradable scaffold has been developed which does not require precelluiarization before transplantation. This new kind of vascular scaffold prototype made from porous poly- e-caprolactone （PCL） membrane to provide three-dimensional environment for cell growth, and embedded with weft-knitted polylactic acid （PLA） fabric to support mechanics. The aim of this paper is to study the variation tendency of mechanical properties with the fabric spacing changing. The basic geometrical parameters were measured to characterize properties of the samples. The tensile and compressive elastic recovery of the samples were tested by the universal mechanical tester and radial compression apparatus, respectively. Both tensile and compressive properties enhanced when reducing the fabric spacing of the composite vascular scaffold.展开更多
Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called s...Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.展开更多
基金supported by the National Natural Science Foundation of China(No.81171731)the Project of Chengdu Science and Technology Bureau(Nos.2021-YF05-01619-SN and 2021-RC05-00022-CG)+2 种基金the Science and Technology Project of Tibet Autonomous Region(Nos.XZ202202YD0013C and XZ201901-GB-08)the Sichuan Science and Technology Program(No.2022YFG0066)the 1·3·5 Project for Disciplines of Excellence,West China Hospital,Sichuan University(Nos.ZYJC21026,ZYGD21001 and ZYJC21077).
文摘At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.
基金would like to thank the Slovenian Research Agency for financial support within the scope of the program P4-0015,as well as BI-CN/18-20-016:Study on the functional properties and thermal safety performance of wood materials and adhesives for 3D printing technology.
文摘The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.
基金Funded by the Shanxi Province Science Foundation for Youths of China[Nos.2014021020-2 and 2015021076]the Shanxi Province Higher School Science and Technology Innovation Project[No.2015125]+2 种基金the Project of Taiyuan University of Technology[Nos.2013T0202013T0212013T022]
文摘In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the fracture surfaces of filaments were studied by scanning electron microscopy（SEM）.The properties of composite filament,such as orientation degree,mechanical properties,and surface friction properties,were analyzed.The thermal performances of composite filament were analyzed by differential scanning calorimetry（DSC） and thermo gravimetric analysis（TGA）.The results showed that the nano-SiO_2 modified by 5% KH-550 could disperse evenly and loosely in nano-scale,and 1 wt% and 3 wt% nano-SiO_2 dispersed throughout PLA evenly.As the quantity of nano-SiO_2 increased,the properties of composite filament,such as orientation degree,friction coefficient,thermal decomposition temperature,and glass transition temperature,increased more or less.The breaking tenacity increased when 1 wt% SiO_2 was added in PLA,but declined when 3 wt% SiO_2 was added.
基金Shanxi Province Science Foundation for Youths,China(No.2014021020-2)the Projects of Taiyuan University of Technology,China(Nos.2012L074,2013T020,2013T021,and 2013T022)Shanxi Province College Students Training Program,China(No.2013067)
文摘In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The results showed that the nano-SiO2 modified by 3% coupling agent KH-570 could be dispersed evenly in PLA in small scale. The thermal decomposition temperature of composite master batches increased by 6. 20-10. 80 ℃, the glass transition temperature increased by 0. 22-5. 16 ℃,and the heat enthalpy at the glass transition temperature increased by 0. 574-2. 437 J /g,compared with pure PLA. The composite master batch possessed superior thermal stability and heat resistance.
基金National Natural Science Foundation of China(No.50803010)Natural Science Foundation of Shanghai,China(No.14ZR1400100)。
文摘With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fiber”,not only has moisture absorption,air permeability,and good mechanical properties but also has many health-related advantages such as antibacterial properties.In this study,four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA)composites were fabricated.Mechanical and thermal properties of the composites were tested and analyzed.The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites,the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3%and 60.1%,respectively.In comparison,the bending strength and the bending modulus were decreased by 21.8%and 7.6%,respectively.Moreover,compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites,the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties.The after-fracture morphology was detected by a scanning electron microscope(SEM).The thermal properties of the composites were also characterized.It was found that the thermal properties of the four types of composites showed very similar behaviors.
基金the National Natural Science Foundation of China(No.51675491)
文摘Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier properties. PLA with good flowability and easy processing was selected. The mechanical properties and barrier properties of the graphene-based composites were improved by the use of PLA for good flowability, making it easy to enter the GO layer as a binder. Three methods of preparation of GO/PLA homogeneous composite membranes were designed by vacuum filtration. The experimental results show that the injection of PLA as a molecular binder into the GO layer can effectively mimic the nano-structure, and enhance the intergranular force of the graphene molecules and the compatibility with the polymer matrix.
文摘The aim of this work was to use cellulose nanocrystals that were obtained by hydrolysis in phosphoric acid solution and further modified with succinic anhydride in the microwave field for PLA reinforcement.A series of allbionanocomposites containing unmodified and surface modified cellulose nanocrystals with CNC content in the range of 1–3%_(w.t.) were obtained by melt blending and tested by XRD,SEM,DSC and DMA to investigate the effect of surface esterification of CNCs on the structure,morphology,dynamic mechanical properties of bionanocomposites,as well as phase transitions of PLA in the presence of cellulosic nanofiller.DMA investigations showed the highest increase of storage modulus by ca.7%(335 MPa at 25℃)in the glassy state of PLA for 2%_(w.t.)of unmodified CNC.Though,addition of 2%_(w.t.)of succinylated CNCs caused the highest increase of the onset of glass transition temperature(by 6.2℃)thus widening the temperature range of biocomposite application.The increase of glass transition temperature indicates the strongest interfacial interactions due to improved miscibility of surface modified nanocrystals and thus good dispersion of additive in PLA matrix providing high interface.
基金National Natural Science Foundations of China(No.30070862,No.30271534)Shanghai Municipal Natural Science Foundation,China(No.05ZR14002,No.06PJ14001,No.064319020,No.108146)the FundamentalResearch Funds for the Central Universities,China(No.10D10514)
文摘A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylactic acid(PLA)-coated Fe3O4 nanoparticles.The diameter of nanocarrier is 30-50 nm by transmission electron micrograph(TEM).The encapsulation efficiency of photosensitizer is 27.98% calculated from UV-vis absorption spectra.The nanocarrier shows obvious photocytotoxic activity to Hela299 tumor cells in vitro.
基金the Fundamental Research Funds for the Central Universities,China，National Natural Science Foundation of China，"111 Project" Biomedical Textile Materials Science and Technology,China，the Donghua University Innovation Fund of Graduate Project,China
文摘A new entire biodegradable scaffold has been developed which does not require precelluiarization before transplantation. This new kind of vascular scaffold prototype made from porous poly- e-caprolactone （PCL） membrane to provide three-dimensional environment for cell growth, and embedded with weft-knitted polylactic acid （PLA） fabric to support mechanics. The aim of this paper is to study the variation tendency of mechanical properties with the fabric spacing changing. The basic geometrical parameters were measured to characterize properties of the samples. The tensile and compressive elastic recovery of the samples were tested by the universal mechanical tester and radial compression apparatus, respectively. Both tensile and compressive properties enhanced when reducing the fabric spacing of the composite vascular scaffold.
文摘Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.
