Visible transparent,infrared stealthy polymeric films with nanocoating of ITO@MXene enable efficient passive radiative heating and solar/electric thermal conversion

Visible transparent yet low infrared-emissivity(ε)polymeric materials are highly anticipated in many applications,whereas the fabrication of which remains a formidable challenge.Herein,visible transparent,flexible,and low-εpolymeric films were fabricated by nanocoating decoration of indium tin oxide(ITO)and MXene on polyethylene terephthalate(PET)film surface through magnetron sputtering and spray coating,respectively.The obtained PET-ITO@MXene(PET-IM)film exhibits lowεof 24.7%and high visible transmittance exceeding 50%,endowing it with excellent visible transparent infrared stealthy by reducing human skin radiation temperature from 32 to 20.8°C,and remarkable zero-energy passive radiative heating capability(5.7°C).Meanwhile,the transparent low-εPET-IM film has high solar absorptivity and electrical conductivity,enabling superior solar/electric to thermal conversion performance.Notably,the three heating modes of passive radiative and active solar/electric can be integrated together to cope with complex heating scenarios.These visible transparent low-εpolymeric films are highly promising in infrared stealth,building daylighting and thermal management,and personal precision heating.

Significantly Improved High-Temperature Energy Storage Performance of BOPP Films by Coating Nanoscale Inorganic Layer

Biaxially oriented polypropylene(BOPP)is one of the most commonly used commercial capacitor films,but its upper operating temperature is below 105℃due to the sharply increased electrical conduction loss at high temperature.In this study,growing an inorganic nanoscale coating layer onto the BOPP film's surface is proposed to suppress electrical conduction loss at high temperature,as well as increase its upper operating temperature.Four kinds of inorganic coating layers that have different energy band structure and dielectric property are grown onto the both surface of BOPP films,respectively.The effect of inorganic coating layer on the high-temperature energy storage performance has been systematically investigated.The favorable coating layer materials and appropriate thickness enable the BOPP films to have a significant improvement in high-temperature energy storage performance.Specifically,when the aluminum nitride(AIN)acts as a coating layer,the AIN-BOPP-AIN sandwich-structured films possess a discharged energy density of 1.5 J cm^(-3)with an efficiency of 90%at 125℃,accompanying an outstandingly cyclic property.Both the discharged energy density and operation temperature are significantly enhanced,indicating that this efficient and facile method provides an important reference to improve the high-temperature energy storage performance of polymer-based dielectric films.

Fabrication of Neutral Supramolecular Polymeric Films via Post-electropolymerization of Discrete Metallacycles

Self-assembly post-modification has proven to be an efficient strategy to build higher-order supramolecular architectures and functional materials. In this study, we successfully realized the construction＇of a new family of neutral supramolecular polymeric films containing well-defined metallacycles as the main scaffolds through combination Of coordination-driven self-assembly with post-electropolymerization. The obtained neutral polymeric materials were fully characterized by the cyclic voltammogram （CV）, SEM, and TEM. The thickness of the films was able to be well regulated by the number of scanning cycles. Moreover, we found that the shape of the metallacycles and the number of triphenylamine moieties played important roles in the formation of the final polymer films. We believe that the introduction of the neutral metallacycles into the final polymer structures not only enriches the library of supramolecular polymeric films but also provides a new platform to study neutral molecule detection, separation, and capture.

Determination of interfacial adhesive properties for polymeric film by blister test

The interfacial adhesive properties ofpolypropylene/stainless steel were studied by the blister test. The polypropylene film with a squared free-standing window was pressured by oil from one side of film. The corresponding deformation field was observed by a digital speckle correlation method. The experimental results show that the squared film deforms and debonds from stainless steel with the increase of pressure. The debonding of the squared film in initiates from the center of edge and extends to the comer, and then the deformation of film evolves from square to circle shape. The interfacial adhesive energy of polypropylene/stainless steel is （22.60±1.55） J/m2, which is in agreement with that measured by film with a circular window.

Investigation of working pressure on the surface roughness controlling technology of glow discharge polymer films based on the diagnosed plasma

The effects of working pressure on the component, surface morphology, surface roughness, and deposition rate of glow discharge polymer （GDP） films by a trans-2-butene/hydrogen gas mixture were investigated based on plasma characteristics diagnosis. The composition and ion energy distributions of a multi-carbon （CaHs/H2） plasma mixture at different working pressures were diagnosed by an energy-resolved mass spectrometer （MS） during the GDP film deposition process. The Fourier transform infrared spectroscopy （FT-IR）, field emission scanning electron microscope （SEM） and white-fight interferometer （WLI） results were obtained to investigate the structure, morphology and roughness characterization of the deposited films, respectively. It was found that the degree of ionization of the C4H8/H2 plasma reduces with an increase in the working pressure. At a low working pressure, the C-H fragments exhibited small-mass and high ion energy in plasma. In this case, the film had a low CH3/CH2 ratio, and displayed a smooth surface without any holes, cracks or asperities. While the working pressure increased to 15 Pa, the largest number of large-mass fragments led to the deposition rate reaching a maximum of 2.11 #m h-1, and to hole defects on the film surface. However, continuing to increase the working pressure, the film surface became smooth again, and the interface between clusters became inconspicuous without etching pits.

PREPARATION OF PHOTOFUNCTIONAL POLYMER THIN FILMS BY LANGMUIR-BLODGETT TECHNIQUE

Polymer LB films containing photofuntional groups were prepared by the copolymerization of N-dodecylacrylamide (DDA), which has an excellent property to form a stable monolayer and LB multilayerswith photofunctional monomers. Tris(2, 2'-bipyridine) ruthenium complex, Ru(bpy)_3^(2+), one of the most well-known redox-active sensitizer, was incorporated into the DDA copolymer. The photogalvanic effect based onthe photoinduced electron transfer using the ruthenium complex in the polymer LB monolayer was discussed.

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well as their measurement principles. A comparison of these experimental methods is given.The cylindrical lightwave reflection method is found to can obtain the thickness distribution along a certain direction.It is a simple and suitable method to evaluate the film thickness uniformity.

SIMULTANEOUS POLYMERIZATION AND FORMATION OF POLYPHENYLACETYLENE FILMS BY RARE-EARTH COORDINATION CATALYSIS Ⅳ.KINETICS AND MECHANISM OF POLYMERIZATION

The CO_2 quenching method has been used for the first time to determine the active complex concen- tration in Nd(naph)_3-Al(i-Bu)_3 catalyst system for polymerization of phenylacetylene into polyphenylacetylene(PPA)films.The kinetics and mechanism of this polymerization have been investigated by CO_2 quenching and IR,UV analytical methods.The kinetic equation can be expressed as Rp=k[M][Cp],and the apparent activation energy is about 13.6 kJ/mol.There is self-termination of chain propagating.Models for formation of the active complex and polymerization mechanism are proposed.

Measurement and control for a repetitive nanosecond-pulse breakdown experiment in polymer films

In order to perform data acquisition and avoid unwanted over-current damage to the power supply, a convenient and real-time method of experimentally investigating repetitive nanosecond-pulse breakdown in polymer dielectric samples is presented. The measurement-acquisition and control system not only records breakdown voltage and current, and time-to-breakdown duration, but also provides a real-time power-off protection for the power supply. Furthermore, the number of applied pulses can be calculated by the product of the time-to-breakdown duration and repetition rate. When the measured time-to-breakdown duration error is taken into account, the repetition rate of applied nanosecond-pulses should be below 40kHz. In addition, some experimental data on repetitive nanosecond-pulse breakdown of polymer films are presented and discussed.

Synthesis and Investigation of Phenol Red Dye Doped Polymer Films

The optical properties of the pure polymer film and polymer films doped with Phenol Red dye at different concentrations were investigated. The films were prepared using the casting technique. Poly (methyl-methacrylate) (PMMA) polymer was doped with the Phenol Red dye dissolved in a mixture of chloroform and little quantity of methanol, used as suitable solvent for both the dye and the polymer. The spectral absorption measurements of these films were carried out at different dye concentrations using UV-Vis double-beam spectrophotometer in the wavelength range 300 - 800 nm. The optical parameters of the prepared Phenol Red dye doped polymer films, absorption coefficient (α), extinction coefficient (κ), refractive index (n), optical and electrical conductivities (σopt and σelect), and optical energy band gap (Eg), were determined. The results showed that the Phenol Red dye doped polymer film is a good candidate for photonic applications such as, solar cells, optical sensors, and other photonic devices.

PHOTOCHROMIC PROPERTIES OF (E)-DICYCLOPROPYLMETHYLENE-(2,5-DIMETHYL-3-FURYLETHYLIDENE)-SUCCINIC ANHYDRIDE DOPED IN POLYSTYRENE THIN FILMS

Fulgide 1-E doped in polystyrene polymer films was heated at various annealing temperatures.Upon irradiation with UV light(366 nm),fulgide 1-E undergoes a conrotatory ring closure to the pink colored closed form 1-C.The later color was switched back to the original color when the films were irradiated with white light.The kinetics of photocoloration and photobleaching processes were followed spectrophotometrically by monitoring the absorbance of the ring closed product 1-C at itsλ_(max) of 525 nm.The first-...

Inverted organic solar cells with solvothermal synthesized vanadium-doped TiO2 thin films as efficient electron transport layer

We investigated the effects of using different thicknesses of pure and vanadium-doped thin films of TiO2 as the electron transport layer in the inverted configuration of organic photovoltaic cells based on poly（3-hexylthiophene） P3HT：[6-6] phenyl-（6） butyric acid methyl ester（PCBM）. 1% vanadium-doped TiO2nanoparticles were synthesized via the solvothermal method. Crystalline structure, morphology, and optical properties of pure and vanadium-doped TiO2 thin films were studied by different techniques such as x-ray diffraction, scanning electron microscopy, transmittance electron microscopy, and UV–visible transmission spectrum. The doctor blade method which is compatible with roll-2-roll printing was used for deposition of pure and vanadium-doped TiO2 thin films with thicknesses of 30 nm and 60 nm. The final results revealed that the best thickness of TiO2 thin films for our fabricated cells was 30 nm. The cell with vanadium-doped TiO2 thin film showed slightly higher power conversion efficiency and great Jsc of 10.7 mA/cm^2 compared with its pure counterpart. In the cells using 60 nm pure and vanadium-doped TiO2 layers, the cell using the doped layer showed much higher efficiency. It is remarkable that the external quantum efficiency of vanadium-doped TiO2 thin film was better in all wavelengths.

RUPTURING OF POLYMER FILMS WITH RUBBING-INDUCED SURFACE DEFECTS

It has been a long-standing question whether dewetting of polymer film from non-wettable substrate surfaceswherein the bicontinuous morphology never forms in the dewetting film is due to spinodal instability or heterogeneousnucleation. In this experiment, we use a simple method to make the distinction through introduction of topographical defectsof the films by rubbing the sample surface with a rayon cloth. Spinodal dewetting is identified for those films that dewet by acharateristic wavevector, q, independent of the density of rubbing-induced defects. Heterogeneous nucleation, on the otherhand, is identified for those with q increasing with increasing density of defects. Our result shows that PS films on oxidecoated silicon with thickness less than ≈ 13 nm are dominated by spinodal dewetting, but the thicker films are dominated bynucleation dewetting. We also confirm that spinodal dewetting does not necessarily lead to a bicontinuous morphology in thedewetting film, contrary to the classic theory of Cahn.

Temperature Controlled Lateral Pattern Formation in Confined Polymer Thin Films

The thermal induced topography change in a model system consisting of a polymer film on a Si substrate capped by a thin metal layer has been studied by using AFM. Regular lateral patterns over large areas were observed on the surface when the system was heated to a sufficiently high temperature. 2D-FFT analysis to the AFM images indicates that the patterns are isotropic and have well defined periodicities. The periodicities of the characteristic patterns are found to depend strongly on the annealing temperature. The study of the kinetics of the formation reveals that such a topography forms almost instantaneously once the critical temperature is reached. It is suggested that this wave-like surface morphology is driven by the thermal expansion coefficient mismatch of the different layers. This method for generating regular wave-like patterns could be used as a general method for patterning various organic materials into micro/nanostructures.

A USEFUL AND PRECISE EXPRESSION FOR ORIENTATION FACTOR OF POLED POLYMER FILMS

Based on ID ROGM, d_(33) of poled films can be estimated from orientation factor <cos^3θ>. In this letter, a direct expression

Performance improvement in polymeric thin film transistors using chemically modified both silver bottom contacts and dielectric surfaces

An efficient interface modification is introduced to improve the performance of polymeric thin film transistors. This efficient interface modification is first achieved by 4-fluorothiophenol（4-FTP） self-assembled monolayers（SAM） to chemically treat the silver source–drain（S/D） contacts while the silicon oxide（SiO2） dielectric interface is further primed by either hexamethyldisilazane（HMDS） or octyltrichlorosilane（OTS-C8）. Results show that contact resistance is the dominant factor that limits the field effect mobility of the PTDPPTFT4 transistors. With proper surface modification applied to both the dielectric surface and the bottom contacts, the field effect mobilities of the bottom-gate bottom-contact PTDPPTFT4 transistors were significantly improved from 0.15 cm^2·V^-1·s^-1 to 0.91 cm^2·V^-1·s^-1.

Fabrication and Characterization of Semi-Crystalline and Amorphous Dielectric Polymer Films for Energy Storage

Dielectric polymer films are energy storage materials that are used in pulse power operations, power electronics and sustainable energy applications. This paper reviews energy storage devices with focus on dielectric film capacitors. Two prominent examples of polymer dielectrics Polyetherimide (PEI) and Poly (tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride) (THV) have been discussed. Polyetherimide (PEI) is an amorphous polymer recognized for its high-temperature capability, low dielectric loss and high dielectric strength. THV is a semi-crystalline polymer with high dielectric constant, high-temperature capability and charge-discharge efficiency. The primary focus of this paper is to introduce the reader to the fabrication procedures and characterization techniques used in research labs for processing of dielectric polymers. The fabrication and characterization process of both polymers has been discussed in detail to shed the light on experimental process in this area of research.

An Investigation into the Role of Capping on Second Harmonic Generation from Nonlinear Organic Polymer and Guest-Host Thin Films by In-Situ Poling

In attempts to fabricate thermally stable second-order nonlinear polymer thin films, we have investigated the second harmonic generation (SHG) from both nonlinear polymer and guest-host thin films. We have also investigated the role of capping on the SHG, temporal stability and relaxation of dipole alignment. Corona poling techniques were employed to orient the dopants into the noncentrosymmetric structure required to obtain the SHG. The effect of capping with a polymeric encapsulant below the glass transition temperature of the polymers on the unpoled and corona poled thin films was studied. Capping of the nonlinear polymer and guest host thin films have resulted in high SHG with good temporal stability. SHG signal falls drastically during the first 8 days after poling while no further significant decay in SHG signal was observed after about 33 days. Our investigations have identified the characteristics required for a good encapsulant on a non-con-ductive surface.

A New Type of Hybrid Fish-like Microrobot

In order to develop a new type of fish-like microrobot with swimming, walking, and floating motions, in our past research, we developed a hybrid microrobot actuated by ionic conducting polymer film （ICPF） actuators. But the microrobot had some problems in walking and floating motions. In this paper, we propose a concept of hybrid microrobot （see Fig. 1）. The microrobot is actuated by a pair of caudal fins, a base with legs and an array of artificial swim bladders. We have developed a prototype of the base with legs and one artificial swim bladder, respectively, and carried out experiments for evaluating their characteristics. Experimental results show the base with legs can realize walking speed of 6 mm/s and rotating speed of 7.1 degrees/s respectively, and the prototype of the artificial swim bladder has a maximum floatage of 2.6 mN. The experimental results also indicate that the microrobot has some advantages, such as walking motion with 2 degrees of freedom, the walking ability on rough surface （sand paper）, the controllable floatage, etc. This kind of fish-like microrobot is expected for industrial and medical applications.

Fabrication of SAW Sensor for Detecting Chemical Agent

SAW sensors using five different types of polymer to detect of chemical agents(DMMP,CH_3CN,CH_2Cl_2,DCP) have been fabricated and its gas response characteristics were extensively investigated.The polymers used as the sensing material are polyisobutylene(PIB),polyepichlorohydrin(PECH),polydimethylsiloxane(PDMS),polyisoprene(PIP)and polybutadiene(PBD).Their thin films were coated on quartz substrate by spin coating technique.Three types of simulants gases,dimethylmethylphosphonate(DMMP),acetonitrile(CH_3CN)and dichloromethane(CH_2Cl_2),dichloropentane(DCP)were used as target gases,instead of the real nerve,blood,choking and vesicant agents.After spin coating of PIB and PECH,the substrates were heated to 65℃with N_2 flow for 1 h to remove the cyclohexane and ethylacetate which was used as solvent. PDMS was heated to 75℃with N_2 flow for 2 h to remove the ethylacetate which was used as solvent.PBD and PIP on the substrate were heated to 60℃with N_2 flow for 1 h to remove the benzen which was used as solvent.The sensing characteristics of the SAW sensors were measured by using E-5061A network analyzer.