Sequence structure controllable polymerization-induced self-assembly

Polymerization-induced self-assembly(PISA)combines synthesis and self-assembly of artificial polymers in one-pot,which brings us one step closer to emulating biosynthesis.However,the reported PISA formulations primarily focus on developing nano-objects with new chemical compositions and rarely on structural regulation of polymers with specific components.Herein,sequence structure controllable polymerization-induced self-assembly(SCPISA)is reported by using 7-(2-methacryloyloxyethoxy)-4-methylcoumarin(CMA)as a monomer.During the copolymerization of 2-hydroxyethyl methacrylate(HEMA)and CMA,controlled incorporation of CMA units into the polymer chains can be realized by programmable light/heat changes.SCPISA-based P(HEMA-co-CMA)copolymers with the same composition but different sequence structures generate a range of assemblies.Moreover,the morphologies of the resultant nano-objects can also be controlled by regulating the feed molar ratio of CMA and HEMA,which is similar to the conventional PISA,but the synthesis procedure is obviously simplified in SCPISA.The versatility of the methodology is further demonstrated by the fabrication of different functional nano-objects with sequence structure-dependent morphologies in SCPISA systems with different functional monomers.

Recent progress in polymerization-induced self-assembly:From the perspective of driving forces

Polymerization-induced self-assembly(PISA)enables the simultaneous growth and self-assembly of block copolymers in one pot and therefore has developed into a high-efficiency platform for the preparation of polymer assemblies with high concentration and excellent reproducibility.During the past decade,the driving force of PISA has extended from hydrophobic interactions to other supramolecular interactions,which has greatly innovated the design of PISA,enlarged the monomer/solvent toolkit,and endowed the polymer assemblies with intrinsic dynamicity and responsiveness.To unravel the important role of driving forces in the formation of polymeric assemblies,this review summarized the recent development of PISA from the perspective of driving forces.Motivated by this goal,here we give a brief overview of the basic principles of PISA and systematically discuss the various driving forces in the PISA system,including hydrophobic interactions,hydrogen bonding,electrostatic interactions,andπ-πinteractions.Furthermore,PISA systems that are driven and regulated by crystallization or liquid crystalline ordering were also highlighted.

Enzyme-assisted Photoinitiated Polymerization-induced Self-assembly in Continuous Flow Reactors with Oxygen Tolerance

Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g.argon,nitrogen)are usually required.Moreover,the large-scale preparation of block copolymer nano-objects at room temperature is challenging.Herein,we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA)in continuous flow reactors with oxygen toleranee.The addition of glucose oxidase(GOx)and glucose into the reaction mixture can consume oxygen efficiently and constantly,allow the flow photo-PISA to be performed under open-air conditions.Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L)was needed to achieve the oxygen tolerance.Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP)of core-forming block,monomer concentration,reaction temperature,and solvent composition.We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.

Polymerization-Induced Self-Assembly for the Preparation of Poly(N,N-dimethylacrylamide)-b-Poly(4-tert-butoxystyrene-co-pentafluorostyrene)Particles with Inverse Bicontinuous Phases

Main observation and conclusion Polymerization-induced self-assembly(PISA)is an effective method to prepare block copolymer(BCP)particles with various morphologies.However,BCPs with inverse bicontinuous phase structure have been rarely prepared via PISA.Herein,we report the preparation of particles.

Principles and Characteristics of Polymerization-Induced Self-Assembly with Various Polymerization Techniques

A chemical reaction that drives a physical polymer selfassembly process,namely,polymerization-induced self-assembly(PISA),combines block copolymer synthesis and nanoparticle formation efficiently at high polymer concentrations.Various nanoparticlemorphologies such as spheres,worms,and vesicles can be prepared readily in polar and nonpolarmedia.PISA has been well developed in combination with reversible addition-fragmentation chain transfer(RAFT)polymerization.Notably,developments with other polymerization methods are also achieved.In this report,first,we discuss the general principles of RAFT-PISA and the nanoparticles generated from this method.Specifically,new insights into polymer nucleation and subsequent morphological evolution are highlighted.Subsequently,PISA formulations that use other polymerization methods[atom transfer radical polymerization(ATRP),nitroxide-mediated polymerization(NMP),ring-opening metathesis polymerization(ROMP),and ring-opening polymerization(ROP)of N-carboxyanhydrides(NCAs)]are summarized in detail.Finally,more exotic PISA formulations are emphasized:these are based on organotelluriummediated living radical polymerization(TERP),living anionic polymerization(LAP),addition-fragmentation chain transfer(AFCT)polymerization,reversible complexation-mediated polymerization(RCMP),and cobalt-mediated radical polymerization(CMRP),or utilize a comonomer that undergoes radical ringopening polymerization(rROP).This reviewis concluded with a perspective on the status and potential of PISA.

Effect of Butyl α-Hydroxymethyl Acrylate Monomer Structure on the Morphology Produced via Aqueous Emulsion Polymerization-induced Self-assembly

Polymerization-induced self-assembly(PISA) is an efficient and versatile method to afford polymeric nano-objects with polymorphic morphologies. Compared to dispersion PISA syntheses based on soluble monomers, the vast majority of emulsion PISA formulations using insoluble monomers leads to kinetically-trapped spheres. Herein, we present aqueous emulsion PISA formulations generating worms and vesicles besides spheres. Two monomers with different butyl groups, n-butyl(n BHMA) and tert-butyl(t BHMA) α-hydroxymethyl acrylate, and thus possessing different water solubilities were synthesized via Baylis-Hillman reaction. Photoinitiated aqueous emulsion polymerizations of n BHMA and t BHMA employing poly(ethylene glycol) macromolecular chain transfer agents(macro-CTAs, PEG45-CTA, and PEG113-CTA) at 40 °C were systematically investigated to evaluate the effect of monomer structure and solubility on the morphology of the generated block copolymer nano-objects. Higher order morphologies including worms and vesicles were readily accessed for t BHMA, which has a higher water solubility than that of n BHMA. This study proves that plasticization of the core-forming block by water plays a key role in enhancing chain mobility required for morphological transition in emulsion PISA.

Synchronous Synthesis of Polymeric Vesicles with Controllable Size and Low-Polydispersity by Polymerization-Induced Self-Assembly

Comprehensive Summary The size and size distribution of polymeric nanoparticles have great impact on their physicochemical and biological properties.Polymerization-induced self-assembly(PISA)has been demonstrated to be an efficient method to fabricate various polymeric nanoparticles,among which polymeric vesicles have attracted great interest due to their unique hollow structure.

Self-assembly of perovskite nanocrystals:From driving forces to applications

Self-assembly of metal halide perovskite nanocrystals(NCs)into superlattices can exhibit unique collective properties,which have significant application values in the display,detector,and solar cell field.This review discusses the driving forces behind the self-assembly process of perovskite NCs,and the commonly used self-assembly methods and different self-assembly structures are detailed.Subsequently,we summarize the collective optoelectronic properties and application areas of perovskite superlattice structures.Finally,we conclude with an outlook on the potential issues and future challenges in developing perovskite NCs.

Alcohol solvent effect on the self-assembly behaviors of lignin oligomers

The interactions between lignin oligomers and solvents determine the behaviors of lignin oligomers self-assembling into uniform lignin nanoparticles(LNPs).Herein,several alcohol solvents,which readily interact with the lignin oligomers,were adopted to study their effects during solvent shifting process for LNPs’production.The lignin oligomers with widely distributed molecular weight and abundant guaiacyl units were extracted from wood waste(mainly consists of pine wood),exerting outstanding self-assembly capability.Uniform and spherical LNPs were generated in H_(2)O-n-propanol cosolvent,whereas irregular LNPs were obtained in H_(2)O-methanol cosolvent.The unsatisfactory self-assembly performance of the lignin oligomers in H_(2)O-methanol cosolvent could be attributed to two aspects.On one hand,for the initial dissolution state,the distinguishing Hansen solubility parameter and polarity between methanol solvent and lignin oligomers resulted in the poor dispersion of the lignin oligomers.On the other hand,strong hydrogen bonds between methanol solvent and lignin oligomers during solvent shifting process,hindered the interactions among the lignin oligomers for self-assembly.

Chitosan/Sodium Alginate Multilayer pH-Sensitive Films Based on Layer-by-Layer Self-Assembly for Intelligent Packaging

The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.

High-performance nano-splitters containing aggregation-induced emission luminogens for stereoselective crystallization obtained via polymerization-induced self-assembly

Collecting both enantiomorphs with high optical purity and yield in a single crystallization process can be achieved by adding aggregated polymeric“tailor-made”additives,known as nano-splitters.Inefficient preparation and large addition amount have hindered the practical application of such amazing nanoparticles.Herein,we report the first nano-splitters containing aggregation-induced emission luminogens prepared via polymerization-induced self-assembly of block copolymer,poly[(S)-2-(tert-butoxycarbonylamino)-6-(methacrylamido)hexanoic acid]-b-polystyrene,followed by the removal of tert-butoxycarbonyl groups.When added into the supersaturated solution of racemic amino acids(a.a.)with seeds,the fluorescent labeled nano-assemblies enantioselectivity dyed the crystals of S-a.a.and enabled the separation from colorless R-a.a.crystals in terms of fluorescent difference.Both enantiomers were obtained with high optical purity and yield(e.g.,R-asparagine monohydrate,>99 ee%;S-asparagine monohydrate,∼94 ee%;88%total yield).Owing to a low detection limit of fluorescence,the addition amount was reduced to 0.03 wt%without remarkably compromising the ee values of both enantiomorphs.Due to the low addition amount and efficient synthesis,the output–input ratio was increased greatly.

Combination therapy to overcome ferroptosis resistance by biomimetic self-assembly nano-prodrug

Ferroptosis has emerged as a potent form of no-apoptotic cell death that offers a promising alternative to avoid the chemoresistance of apoptotic pathways and serves as a vulnerability of cancer.Herein,we have constructed a biomimetic self-assembly nano-prodrug system that enables the co-delivery of gefitinib(Gefi),ferrocene(Fc)and dihydroartemisinin(DHA)for the combined therapy of both ferroptosis and apoptosis.In the tumor microenvironment,this nano-prodrug is able to disassemble and trigger drug release under high levels of GSH.Interestingly,the released DHA can downregulate GPX4 level for the enhancement of intracellular ferroptosis from Fc,further executing tumor cell death with concomitant chemotherapy by Gefi.More importantly,this nano-prodrug provides highly homologous targeting ability by coating related cell membranes and exhibits outstanding inhibition of tumor growth and metastasis,as well as no noticeable side-effects during treatments.This simple small molecular self-assembled nano-prodrug provides a new reasonably designed modality for ferroptosis-combined chemotherapy.

Efficient conversion of lignin waste and self-assembly synthesis of C@MnCo_(2)O_(4)for asymmetric supercapacitors with high energy density

Lignin waste from the papermaking and biorefineries industry is a significantly promising renewable resource to prepare advanced carbon materials for diverse applications,such as the electrodes of supercapacitors;however,the improvement of their energy density remains a challenge.Here,we design a green and universal approach to prepare the composite electrode material,which is composed of lignin-phenolformaldehyde resins derived hierarchical porous carbon(LR-HPC)as conductive skeletons and the self-assembly manganese cobaltite(MnCo_(2)O_(4))nanocrystals as active sites.The synthesized C@MnCo_(2)O_(4)composite has an abundant porous structure and superior electronic conductivity,allowing for more charge/electron mass transfer channels and active sites for the redox reactions.The composite shows excellent electrochemical performance,such as the maximum specific capacitance of~726 mF cm^(-2)at 0.5 mV s^(-1),due to the significantly enhanced interactive interface between LR-HPC and MnCo_(2)O_(4)crystals.The assembled all-solid-state asymmetric supercapacitor,with the LR-HPC and C@MnCo_(2)O_(4)as cathode and anode,respectively,exhibits the highest volumetric energy density of 0.68 mWh cm^(-3)at a power density of 8.2 mW cm^(-3).Moreover,this device shows a high capacity retention ratio of~87.6%at 5 mA cm^(-2)after 5000 cycles.

Analysis on the formation principle and present situation of nano phase state of multi-component self-assembly of traditional Chinese compound medicine decoction

Traditional Chinese medicine decoction is a complex polydispersed phase system containing real solution,colloid solution,emulsion and suspension.The compound decoction of traditional Chinese medicine has complex components,including saponins,alkaloids,polysaccharides,flavonoids,amino acids and so on,which can be self-assembled to form gels,fibers,micelles,vesicles and so on.The self-assembled nano-phase not only neutralizes the single drug and reduces the toxicity and side effects,but also has its own pharmacological effects,which complement each other to achieve synergistic effect,so as to achieve the role of drug supplement,which is of research significance.The formation principle,solubilization and synergism principle and characterization method of multi-component self-assembly of traditional Chinese medicine compound decoction are discussed in this paper.

Self-assembly synthesis of solid polymer electrolyte with carbonate terminated poly (ethylene glycol) matrix and its application for solid state lithium battery

A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles containing a conductive PEG corona, fumed SiO2 and Li TFSI salt via polymerization-induced self-assembly is proposed. This method to prepare SPEs has the advantages of one-pot convenient synthesis, avoiding use of organic solvent and conveniently adding inorganic additives. CH3O-PEG-IC combines advantages of PEG and polycarbonate, the in situ synthesized PEG-b-PS nanoparticles containing a rigid polystyrene(PS) core and a PEG corona guarantee continuous lithium ion transport in the synthesized SPEs, and the fumed SiO2 optimizes the interfacial properties and improves the electrochemical stability, all of which afford SPEs a well considerable room temperature ionic conductivity of 1.73 × 10^-4S/cm, high lithium transference number of 0.53, and wide electrochemical stability window of 5.5 V(vs. Li^+/Li). By employing these SPEs, the assembled solid state cells of Li FePO4 |SPEs|Li exhibit considerable cell performance.

High-performance self-assembly MnCo2O4 nanosheets for asymmetric supercapacitors

In this study,MnCo2O4 nanosheets were proposed to be utilized as an electrode material for supercapacitors.A two-step hydrothermal method with post-annealing treatment was employed in preparation of the nanostructures.MnCo2O4 electrode delivered a high specific capacitance of 2000 F g^-1 at 0.5 A g^-1,remarkable high-rate capability of 1150 F g^-1 at 20 A g^-1,and an excellent cycling stability of 92.3%at 5 A g^-1 after 5000 cycles.It is found that a three-electrode supercapacitor based on MnCo2O4 exhibits a promising electrochemical performance,better than the other similar materials,benefited from the synergistic effects of MnCo2O4 nanosheets.In fact,the self-assembly of nanosheets structure with high specific surface area and mesoporous structure can potentially enhance the electrochemical performance of supercapacitors.

The lipase monolayer film self-assembly on the negatively charged poly(ethylene terephthalate) substrate

The PET-CO2- film was prepared and the lipase was assembled on the surface of the PET-CO2- substrate The structure at the surface and activity of lipase/PET monolayer were studied by ATR-FTIR and AFM, and other methods.

Self-assembly to monolayer graphene film with high electrical conductivity

Monolayer chemically converted graphene （CCG） nanosheets can be homogeneously self-assembled onto silicon wafer modified by 3-aminopr- opyl triethoxysilane （APTES） to form very thin graphene film. The CCG film was characterized by FT-IR, XRD, SEM, TEM and AFM. Results show that CCG sheets formed monolayer film after assembled onto silicon wafer and there is a very tight chemical bond between sheets and wafer. Furthermore, the electrical measurements revealed that the monolayer graphene film has an excellent electrical conductivity.

Experimental Study on Self-assembly of KLD-12 Peptide Hydrogel and 3-D Culture of MSC Encapsulated within Hydrogel In Vitro

To synthesize KLD-12 peptide with sequence of AcN-KLDLKLDLKLDL-CNH2 and trigger its self-assembly in vitro, to encapsulate rabbit MSCs within peptide hydrogel for 3-D culture and to evaluate the feasibility of using it as injectable scaffold for tissue engineering of IVD. KLD-12 peptide was purified and tested with high performance liquid chromatography （HPLC） and mass spectroscopy （MS）. KLD-12 peptide solutions with concentrations of 5 g/L, 2.5 g/L and 1 g/L were triggered to self-assembly with 1 xPBS in vitro, and the self-assembled peptide hydrogel was morphologically observed. Atomic force microscope （AFM） was employed to examine the inner structure of self-assembled peptide hydrogel. Mesenchymal stem cells （MSCs） were encapsulated within peptide hydrogel for 3-D culture for 2 weeks. Calcein-AM/PI fluorescence staining was used to detect living and dead cells. Cell viability was observed to evaluate the bioactivity of MSCs in KLD-12 peptide hydrogel. The results of HPLC and MS showed that the relative molecular mass of KLD-12 peptide was 1467.83, with a purity quotient of 95.36%. KLD-12 peptide at 5 g/L could self-assemble to produce a hydrogel, which was structurally integral and homogeneous and was able to provide sufficient cohesion to retain the shape of hydrogel. AFM demonstrated that the self-assembly of KLD-12 peptide hydrogel was successful and the assembled material was composed of a kind of nano-fiber with a diameter of 3040 nm and a length of hundreds of nm. Calcein-AM/PI fluorescence staining revealed that MSCs in KLD-12 peptide hydrogel grew well. Cell activity detection exhibited that the A value increased over the culture time. It is concluded that KLD-12 peptide was synthesized successfully and was able to self-assemble to produce nano-fiber hydrogel in vitro. MSCs in KLD-12 peptide hydrogel grew well and proliferated with the culture time. KLD-12 peptide hydrogel can serve as an excellent injectable material of biological scaffolds in tissue engineering of IVD.

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Here, large-scale and uniform hexagonal zinc oxide(ZnO) nanosheet films were deposited onto indium tin oxide(ITO)-coated transparent conducting glass substrates via a facile galvanic displacement deposition process. Compared with other commonly used solution methods, this process avoids high temperature and electric power as well as supporting agents to make it simple and cost-effective. The as-fabricated ZnO nanosheet films have uniform hexagonal wurtzite structure. The photoelectrochemical(PEC) cell based on ZnO nanosheet film/ITO photoelectrode was also fabricated and its performance was improved by optimizing the solution concentration. A higher photocurrent density of*500 l A cm^(-2)under AM 1.5 G simulated illumination of 100 m W cm^(-2)with zero bias potential(vs. Ag/AgCl electrode) was obtained, which may ascribe to the increased surface-to-volume ratio of disordered Zn O nanosheet arrays. Our developed method may be used to deposit other oxide semiconductors, and the Zn O nanosheet film/ITO PEC cell can be used to design low-cost optoelectronic and photoelectrochemical devices.