Composite fabrics based on Polytetrafluoroethylene(PTFE)polymer displays several notable properties.They are waterproof,windproof,permeable to moisture and thermally insulating at the same time.In the present study,PT...Composite fabrics based on Polytetrafluoroethylene(PTFE)polymer displays several notable properties.They are waterproof,windproof,permeable to moisture and thermally insulating at the same time.In the present study,PTFE fibers are used as raw material to make fiber membranes.The film is formed by crisscrossing interconnected fiber filaments and the related air permeability:tensile creep characteristics and other properties are tested.The results show that the pore size,thickness,and porosity of the film itself can affect the moisture permeability of the film.The water pressure resistance of the selected fabric is 8.5 kPa,and the moisture permeability is 7038 g/(m^(2)·24 h).展开更多
Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was ...Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.展开更多
Nitrogen-doped carbon materials encapsulating 3 d transition metals are promising alternatives to replace noble metal Pt catalysts for efficiently catalyzing the oxygen reduction reaction(ORR). Herein, we use cobalt s...Nitrogen-doped carbon materials encapsulating 3 d transition metals are promising alternatives to replace noble metal Pt catalysts for efficiently catalyzing the oxygen reduction reaction(ORR). Herein, we use cobalt substituted perfluorosulfonic acid/polytetrafluoroethylene copolymer and dicyandiamide as the pyrolysis precursor to synthesize nitrogen-doped carbon nanotube(N–CNT) encapsulating cobalt nanoparticles hybrid material. The carbon layers and specific surface area of N–CNT have a critical role to the ORR performance due to the exposed active sites, determined by the mass ratio of the two precursors. The optimum hybrid material exhibits high ORR activity and stability, as well as excellent performance and durability in zinc–air battery.展开更多
Polytetrafluoroethylene(PTFE)is a low-background polymer that is applied to several applications in rare-event detection and underground low-background experiments.PTFE-based electronic substrates are important for re...Polytetrafluoroethylene(PTFE)is a low-background polymer that is applied to several applications in rare-event detection and underground low-background experiments.PTFE-based electronic substrates are important for reducing the detection limit of high-purity germanium detectors and scintillator calorimeters,which are widely applied in dark matter and 0υββdetection experiments.The traditional adhesive bonding method between PTFE and copper is not conducive to working in liquid nitrogen and extremely low-temperature environments.To avoid adhesive bonding,PTFE must be processed for surface metallization owing to the mismatch between the PTFE and copper conductive layer.Low-background PTFE matrix composites(m-PTFE)were selected to improve the electrical and mechanical properties of PTFE by introducing SiO_(2)/TiO_(2) particles.The microstructures,surface elements,and electrical properties of PTFE and m-PTFE were characterized and analyzed following ion implantation.PTFE and m-PTFE surfaces were found to be broken,degraded,and cross-linked by ion implantation,resulting in C=C conjugated double bonds,increased surface energy,and increased surface roughness.Comparably,the surface roughness,bond strength,and conjugated double bonds of m-PTFE were significantly more intense than those of PTFE.Moreover,the interface bonding theory between PTFE and the metal copper foil was analyzed using the direct metallization principle.Therefore,the peel strength of the optimized electronic substrates was higher than that of the industrial standard at extremely low temperatures,while maintaining excellent electrical properties.展开更多
The effect of sintering dispersed dispersion and nano-emulsion particles of high molecular weightpolytetrafluoroethylene(PTFE)on a substrate as a function of“melt”time and temperature is described.Folded chain singl...The effect of sintering dispersed dispersion and nano-emulsion particles of high molecular weightpolytetrafluoroethylene(PTFE)on a substrate as a function of“melt”time and temperature is described.Folded chain singlecrystals parallel to the substrate and as ribbons on-edge(with double striations),as well as bands,are produced for longersintering times;particle merger and diffusion of individual molecules,crystallizing as folded chain,single(or few)molecule,single crystals when“trapped”on the substrate by cooling occur for shorter sintering times.It is suggested the observedstructures develop with sintering time,in a mesomorphic melt.The structure of the nascent particles is also discussed.展开更多
Bilirubin removal from human plasma was obtained via an affinity microporous polytetrafluoroethylene(MPTFE) capillary. The new adsorbent comprised grafted glycidyl methacrylate(GMA) via radiation-induced polymeriz...Bilirubin removal from human plasma was obtained via an affinity microporous polytetrafluoroethylene(MPTFE) capillary. The new adsorbent comprised grafted glycidyl methacrylate(GMA) via radiation-induced polymerization as hydrophilic coating and reactive sites; ethylenediamine(EDA) as a spacer arm; Cibacron Blue F3GA(CB F3GA) as an affinity ligand; MPTFE capillary as the supporting matrix. The average density of CB F3GA attachment to MPTFE capillaries was found to be 136.5 μmol/g. The capacity of bilirubin adsorbed on affinity MPTFE capillaries is 76.1 mg bilirubin/g polymer(at 25℃). This new adsorbent has advantages over both membrane and traditional micro-column, and this system is stable and easy to operate. The results of blood tests suggest the CB F3GA affinity capillary has good blood compatibility.展开更多
In this study, a novel polyurethane membrane, modified by superfine silk-fibroin powder, was prepared for small-diameter vascular grafting. Scanning electron microscopy, transmission electron microscopy, and histologi...In this study, a novel polyurethane membrane, modified by superfine silk-fibroin powder, was prepared for small-diameter vascular grafting. Scanning electron microscopy, transmission electron microscopy, and histological examination were applied to evaluate histocompatibility of this polyurethane membrane. The polyurethane membrane was compared with polytetrafluoroethylene material. A pseudomembrane and gap formed between polytetrafluoroethylene and the surrounding tissues, and no cells infiltrated or grew into the polytetrafluoroethylene material. On the contrary, superfine silk-fibroin powder/polyurethane blend membrane merged tightly with the surrounding tissues without gaps, and cells infiltrated and grew into the material. Moreover, the negative effects of superfine silk-fibroin powder/polyurethane blend membrane on cells were less than those of its polytetrafluoroethylene counterpart. Our findings indicated that the superfine silk-fibroin powder/polyurethane blend membrane has better histocompatibility than polytetrafluoroethylene membrane. It is concluded that the superfine silk-fibroin powder/polyurethane blend membrane is a promising biomaterial for small-diameter prosthesis.展开更多
Composites based on ultradispersed polytetrafluoroethylene and intercalated graphite oxide compounds with dodecahydro-closo-dodecaborates and methods of their fabrication have been developed. The fabricated composites...Composites based on ultradispersed polytetrafluoroethylene and intercalated graphite oxide compounds with dodecahydro-closo-dodecaborates and methods of their fabrication have been developed. The fabricated composites have been characterized using XRD analysis, and optical microscopy. These composites are distinguished with completeness of their combustion, since the combustion products comprise gaseous boron fluorine-containing compounds of boron, boron trifluoride (BF3), and boron oxyfluoride ((BOF)3). Besides, these composites are characterized with increased energy capacity as compared to purely oxygen-containing compounds, since the heat of formation of boron fluorine-containing compounds is higher than that of boron oxide. Introduction of ultradispersed polytetrafluoroethylene imparts composites with hydrophobicity, thus improving their functioning properties.展开更多
文摘Composite fabrics based on Polytetrafluoroethylene(PTFE)polymer displays several notable properties.They are waterproof,windproof,permeable to moisture and thermally insulating at the same time.In the present study,PTFE fibers are used as raw material to make fiber membranes.The film is formed by crisscrossing interconnected fiber filaments and the related air permeability:tensile creep characteristics and other properties are tested.The results show that the pore size,thickness,and porosity of the film itself can affect the moisture permeability of the film.The water pressure resistance of the selected fabric is 8.5 kPa,and the moisture permeability is 7038 g/(m^(2)·24 h).
文摘Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.
基金financial support from the Ministry of Science and Technology of China(Grants 2016YFB0600901 and 2013CB933100)the National Natural Science Foundation of China(Grants 21573222 and 91545202)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB17020200)financial support from CAS Youth Innovation Promotion(Grant No.2015145)
文摘Nitrogen-doped carbon materials encapsulating 3 d transition metals are promising alternatives to replace noble metal Pt catalysts for efficiently catalyzing the oxygen reduction reaction(ORR). Herein, we use cobalt substituted perfluorosulfonic acid/polytetrafluoroethylene copolymer and dicyandiamide as the pyrolysis precursor to synthesize nitrogen-doped carbon nanotube(N–CNT) encapsulating cobalt nanoparticles hybrid material. The carbon layers and specific surface area of N–CNT have a critical role to the ORR performance due to the exposed active sites, determined by the mass ratio of the two precursors. The optimum hybrid material exhibits high ORR activity and stability, as well as excellent performance and durability in zinc–air battery.
基金supported by the National Natural Science Foundation of China(Nos.12141502 and 12005017).
文摘Polytetrafluoroethylene(PTFE)is a low-background polymer that is applied to several applications in rare-event detection and underground low-background experiments.PTFE-based electronic substrates are important for reducing the detection limit of high-purity germanium detectors and scintillator calorimeters,which are widely applied in dark matter and 0υββdetection experiments.The traditional adhesive bonding method between PTFE and copper is not conducive to working in liquid nitrogen and extremely low-temperature environments.To avoid adhesive bonding,PTFE must be processed for surface metallization owing to the mismatch between the PTFE and copper conductive layer.Low-background PTFE matrix composites(m-PTFE)were selected to improve the electrical and mechanical properties of PTFE by introducing SiO_(2)/TiO_(2) particles.The microstructures,surface elements,and electrical properties of PTFE and m-PTFE were characterized and analyzed following ion implantation.PTFE and m-PTFE surfaces were found to be broken,degraded,and cross-linked by ion implantation,resulting in C=C conjugated double bonds,increased surface energy,and increased surface roughness.Comparably,the surface roughness,bond strength,and conjugated double bonds of m-PTFE were significantly more intense than those of PTFE.Moreover,the interface bonding theory between PTFE and the metal copper foil was analyzed using the direct metallization principle.Therefore,the peel strength of the optimized electronic substrates was higher than that of the industrial standard at extremely low temperatures,while maintaining excellent electrical properties.
文摘The effect of sintering dispersed dispersion and nano-emulsion particles of high molecular weightpolytetrafluoroethylene(PTFE)on a substrate as a function of“melt”time and temperature is described.Folded chain singlecrystals parallel to the substrate and as ribbons on-edge(with double striations),as well as bands,are produced for longersintering times;particle merger and diffusion of individual molecules,crystallizing as folded chain,single(or few)molecule,single crystals when“trapped”on the substrate by cooling occur for shorter sintering times.It is suggested the observedstructures develop with sintering time,in a mesomorphic melt.The structure of the nascent particles is also discussed.
基金Supported by the National Natural Science Foundation of China(No.29405038)
文摘Bilirubin removal from human plasma was obtained via an affinity microporous polytetrafluoroethylene(MPTFE) capillary. The new adsorbent comprised grafted glycidyl methacrylate(GMA) via radiation-induced polymerization as hydrophilic coating and reactive sites; ethylenediamine(EDA) as a spacer arm; Cibacron Blue F3GA(CB F3GA) as an affinity ligand; MPTFE capillary as the supporting matrix. The average density of CB F3GA attachment to MPTFE capillaries was found to be 136.5 μmol/g. The capacity of bilirubin adsorbed on affinity MPTFE capillaries is 76.1 mg bilirubin/g polymer(at 25℃). This new adsorbent has advantages over both membrane and traditional micro-column, and this system is stable and easy to operate. The results of blood tests suggest the CB F3GA affinity capillary has good blood compatibility.
基金supported by a grant from the 973 Programof Ministry of Science and Technology of China(No.2009CB526400)
文摘In this study, a novel polyurethane membrane, modified by superfine silk-fibroin powder, was prepared for small-diameter vascular grafting. Scanning electron microscopy, transmission electron microscopy, and histological examination were applied to evaluate histocompatibility of this polyurethane membrane. The polyurethane membrane was compared with polytetrafluoroethylene material. A pseudomembrane and gap formed between polytetrafluoroethylene and the surrounding tissues, and no cells infiltrated or grew into the polytetrafluoroethylene material. On the contrary, superfine silk-fibroin powder/polyurethane blend membrane merged tightly with the surrounding tissues without gaps, and cells infiltrated and grew into the material. Moreover, the negative effects of superfine silk-fibroin powder/polyurethane blend membrane on cells were less than those of its polytetrafluoroethylene counterpart. Our findings indicated that the superfine silk-fibroin powder/polyurethane blend membrane has better histocompatibility than polytetrafluoroethylene membrane. It is concluded that the superfine silk-fibroin powder/polyurethane blend membrane is a promising biomaterial for small-diameter prosthesis.
文摘Composites based on ultradispersed polytetrafluoroethylene and intercalated graphite oxide compounds with dodecahydro-closo-dodecaborates and methods of their fabrication have been developed. The fabricated composites have been characterized using XRD analysis, and optical microscopy. These composites are distinguished with completeness of their combustion, since the combustion products comprise gaseous boron fluorine-containing compounds of boron, boron trifluoride (BF3), and boron oxyfluoride ((BOF)3). Besides, these composites are characterized with increased energy capacity as compared to purely oxygen-containing compounds, since the heat of formation of boron fluorine-containing compounds is higher than that of boron oxide. Introduction of ultradispersed polytetrafluoroethylene imparts composites with hydrophobicity, thus improving their functioning properties.