Segregation of AFLP Markers in A ( Populus tomentosa× P. bolleana) ×P. tomentosa Carr. BC_1 Family

To investigate the levels of polymorphisms and Mendelian segregation ratio in clone “TB01” (P. tomentosa×P. bolleana) ×clone “LM50” (P. tomentosa) BC 1 population at the entire genome level, amplified fragment length polymorphisms (AFLPs) analysis was conducted for both parents and 120 progenies. Forty one pairs of selective primers were used to detect 2?707 bands, of which 712 (26.4%) were polymorphic. Chi\|square tests were performed to examine if the observed genotypic frequencies of AFLP loci deviated from expected 1∶1 Mendelian segregation ratio ( P <0.01) in BC 1 population. Among the 712 loci 571 (80.2%) fit to Mendelian 1∶1 segregation ratio, corresponding to DNA polymorphisms heterozygous in one parent and a null in the other. The result shows that the AFLP markers are very suitable for fingerprinting and genetic mapping in the Chinese white poplar (Populus tomentosa Carr.).

Genetic Control of Air-Dried Wood Density, Mechanical Properties and Its Implication for Veneer Timber Breeding of New Triploid Clones in Populus tomentosa Carr

The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes.

Cloning and Expression Analysis of PtFATB Gene Encoding the Acyl-acyl Carrier Protein Thioesterase in Populus tomentosa Carr

Acyl-ACP thioesterases （FATs） terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzymes that has been described previously in most of the plants. In silico cloning is a new method that utilizes the bioinformatics on the complete genome and available EST database. In this study, a full-length cDNA clone of PtFATB gene was isolated from Populus tomentosa using this approach. It is 1,450 bp in length and the open reading frame encodes a peptide of 421 amino acids. The predicted amino acid sequence shows significant homology with those from other plant species, which contain typical domains owned by FATB proteins. The transcripts of PtFATB were abundant in leaves, and less in roots detected by using semiquantitative RT-PCR. When the shoots were subjected to the stress treatments （cold, dry, NaC1） and ABA （Abscisic acid）, the expression of PtFATB was only slightly reduced under the treatment of low temperature. This suggests that the expression of PtFATB is in a constitutive fashion. This study provides the basis not only for the identification and characterization of this gene but also for the improvement of cold tolerance by controlling the expression of the PtFATB gene in trees in near future.

Variation of Leaf Characteristics in Populus tomentosa Carr

An investigation was conducted to determine the extent of variations among nine provenances of Populus tomentosa Carr. in terms of leaf characteristics. A total of 263 accessions were studied under field conditions in the National Gene Bank of P. tomentosa in 2003. All of the accessions were characterized by 17 indices from 1 to 2-dimension constructions. Variance analysis of all characteristics showed that there were significant differences among the nine provenances and among individuals within each provenance. This study reveals that the evaluated germplasm appears to have a wide genetic base and high potential for further genetic improvements and it also indicates that abundant gene resources of P. tomentosa have been collected and preserved in the National Gene Bank.

Lignin Characterization of Triploid Clones of Populus tomentosa Carr.

In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex （LCC） and the residual lignin from kraft pulp （KP） and sulfite pulp （SP） were isolated and analyzed by Fourier transform infrared （FTIR） spectrum and ^13C nuclear magnetic resonance （NMR）. The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.

Establishment of cell suspension line of Populus tomentosa Carr

Leaves of fine Populus tomentosa genotype TC152 were used as explants to establish cell suspension lines. The effects of plant growth regulators on callus induction and establishment of cell suspension lines were studied. The callus induction rate was the highest on a MS solid medium supplemented with 1.0 mg·L^-1 2,4-D. A cell suspension line could be obtained by inoculating calli which were not subcultured into a MS liquid medium supplemented with 1.5 mg·L^-1 2,4-D. The best subculture medium was MS ＋ 0.8 mg＇L-1 2,4-D ＋ 30 g·L^-1 sucrose with a subculture cycle of seven days.

THE FIBER MORPHOLOGY VARIATION OF TRIPLOID CLONE OF POPULUS TOMENTOSA CARR.AND ITS SUPPOSED HARVESTING AGE FOR THE PAPER INDUSTRY

The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 years for example, the fiber length at breast high grows faster than it does in the later years. But the standard deviation of distribution in fiber length at breast high in mature wood is larger than in the young tree. The technologically harvestable age of triploid clone of Populus tomentosa Carr., BL304 could be 4-7 year old to meet the requirement for paper industry. The distribution of fiber length become concentrated within an annual ring as the tree grows. The test results also show that the cloned poplar has a small Runkel ratio value (less than 0.4, generally about 0.3), and this ratio increases slightly with the tree grows.

Incidence and molecular markers of 2n pollen in Populus tomentosa Carr

Microscopic examination and AFLP molecular markers were employed to determine the incidence and related markers of 2n pollen (unreduced pollen) in Populus tomentosa Carr. The parallel and tripolar spindle at metaphase Ⅱ and the absence of cytokinesis at telophase Ⅱ led to the formation of 2n pollen. A group of 298 clones came from their indigenous areas was investigated for the production of 2n pollen based on the pollen size differences, within a clone and between n and 2n pollen. Pollen grains of 224 clones were collected, six of them only produced normal pollen, and the rest produced 2n pollen at different frequencies (0.6% -21.9%). Clones producing six normal and 22 2n pollen were selected for AFLP analysis. Following an initial screening with 55 primer combinations, the E50-M38 (CAT/ACT) primer was identified, which generated a PCR fragment (246 bp) from the normal clones, but not from the 2n pollen producers. In addition, the E31-M50 (AAA/CAT) amplified DNA fragment (204 bp) that was present in 2n pollen producers, and absent in normal clones. Two polymorphic bands were found and they were distinguished between normal and 2n pollen clones. They are very useful as AFLP markers for molecular-assisted selection in triploid breeding of 2n gametes in P.tomentosa.

Interrelationships between leaf heat conductivity and tissue structures of different varieties of Populus tomentosa Carr

Plant heat conductivity largely depends on tissue structure. Different structures lead to different heat conductivity. As well, water transfer also plays a very important role in heat transfer in plants. We have studied leaf heat conductivity and tissue structure of 3- and 30-year-old Populus tomentosa Carr. trees using infrared thermal imaging, steady state heat conductivity surveys and paraffin section and investigated the relationship between leaf heat conductivity, tissue structure and water content of leaves. The results show that the temperature on leaf surfaces among the various varieties of trees was almost the same. Leaf heat conductivity, temperature and water content of leaves are positively correlated. The thicker the leaf tissue structures, the larger the heat resistance. That is, the tighter the cells and the smaller the interspaces, the smaller the heat conductivity, which is not conducive for heat transfer.

Model of leaf energy distribution and its experimental validation of Populus tomentosa Carr

Leaf temperature of a plant is the result of heat transfer between the plant and its environment. There are many factors that can affect leaf temperature, such as the solar radiation energy, environmental temperature, wind velocity, evaporation on the leaf surface, photosynthesis, respiration and so on, which have different effects on the temperature of leaves. In first instance, we analyzed the heat transfer on leaves of Populus tomentosa Carr. theoretically and constructed a model of energy distribution. We then validated the model by analyzing seven different kinds of one-year-old P. tomentosa leaves experimentally. The result shows that solar radiation is the main energy input and the dominant ways of thermal diffusion are heat transfer between the upper and lower leaf surfaces and evaporation from the leaf surface.

Duplication of Locus Coding of Malate Dehydrogenase in Populus tomentosa Carr

Horizontal starch-gel electrophoresis was used to study crude enzyme extraction from young leaves of 234 clones of Populus tomentosa Cart. selected from nine provenances in North China. Ten enzyme systems were resolved. One hundred and fifty-six clones showing unusual allozyme band patterns at locus Mdh-Ⅰ were found. Three allozyme bands at locus Mdh-Ⅰ were 9：6：1 in concentration. Further studies on the electrophoretic patterns of ground mixed pollen extraction of 30 male clones selected at random from the 156 clones were conducted and it was found that allozyme bands at locus Mdh-Ⅰ were composed of two dark-stained bands and a weak band. Only one group of the malate dehydrogenase （MDH） zymogram composed of two bands was obtained from the electrophoretic segregation of pollen leachate of the same clones. A comparison of the electrophoretic patterns one another suggested that the locus Mdh-Ⅰ coding malate dehydrogenase in diploid species of P. tomentosa was duplicated. The duplicate gene locus possessed three same alleles and was located in mitochondria. The locus duplication of alleles coding malate dehydrogenase in P.tomentosa was discovered and reported for the first time.

Selection of Media for Hardwood Cuttings Container Seedling-raising of Triploid Clones of Populus tomentosa

[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.

Cloning of cDNA Encoding CCoAOMT from Populus tomentosa and Down-regulation of Lignin Content in Transgenic Plant Expressing Antisense Gene

cDNA encoding caffeoyl CoA O-methyltransferase (CCoAOMT) from Chinese white poplar ( Populus tomentosa Carr.) was cloned by RT-PCR and sequenced. Northern analysis displayed that the CCoAOMT was expressed specifically in the developing secondary xylem and its expression was coincident with lignification. The antisense CCoAOMT cDNA was transformed into P. tremula x P. alba mediated by Agrobacterium tumefaciens ( Smith et Townsend) Conn. Transgenic plants were identified with PCR, PCR-Southern and Southern analysis. Lignin content in 5- to 6-month-old transgenic plants was measured. One of the transgenic lines had significant reduction of 17.9% in Klason lignin content as compared with that of untransformed poplar. The results demonstrate that antisense repression of CCoAOMT is an efficient way to reduce lignin content for improving pulping property in engineered trees.

Establishment of High Frequency Regeneration System of Populus tomentosa

The establishment of high frequency regeneration system is a foundation for Agrobacterium mediated genetic transformation. In this work, several important factors influencing the efficiency of regeneration of plants, such as concentration of plant growth regulators, leaf explant orientation, leaf growth sequence and leaf segment, were studied. The results indicated that the differentiation rate of adventitious shoots was 90% on basal MS medium only supplemented with 1 5?mg·L -1 BA (6 benzyladenine) and reached the highest level(95%) when 1 0?mg·L -1 BA and 0 3?mg·L -1 NAA (naphthaleneacetic acid) were added to MS medium. 90% of differentiation rate of adventitious roots were obtained when 0 3?mg·L -1 NAA was only added to MS medium. It was also found that more adventitious shoots were regenerated from the lower segment of leaf (with petiole) than the other segments, the number of adventitious shoots decreased from top to base of leaf growth sequence and the percentage of adventitious shoot induction with adaxial side downward was higher than that with adaxial side upward.

Role of CaCl_(2) in Cold Acclimation-Induced Freezing Resistance of Populus tomentosa Cuttings

Populus tomentosa cuttings were treated with 1mmol·L -1 , 5mmol·L -1 , 10mmol·L -1 or 15mmol·L -1 of CaCl 2 for 1\|7 d, respectively, for studying the effects of different concentrations of CaCl 2 on freezing resistance. Results indicated that 10?mmol·L -1 of CaCl 2 has greater effect than other concentrations on the enhancement of freezing resistance, and the optimum time of pretreatment was 5?d. In addition, cuttings used for cold acclimation at -3℃ were pretreated with or without 10?mmol·L -1 of CaCl 2, 3?mmol·L -1 of Ca 2+ chelator EGTA, 0 05?mmol·L -1 of CaM antagonist CPZ or 0 1?mmol·L -1 of Ca 2+ channel inhibitor LaCl 3 The changes in CaM and freezing resistance of all cuttings were investigated. The results showed that cold acclimation at -3℃ increased CaM content and decreased the minimum temperature for 100% survival. The CaCl 2 pretreatment enhanced the effect of cold acclimation and obviously increased CaM content and decreased the minimum temperature for 100% survival, but this effect was strongly inhibited by the EGTA, CPZ or LaCl 3 It is concluded that the effect of CaCl 2 on freezing resistance is associated with its concentration and time of pretreatment, Ca 2+ CaM may be involved in the induction of freezing resistance of the cuttings.

Effects of Cold Acclimation and CaCl_2 on Total Soluble Protein, CaM and Freezing Resistance of Populus tomentosa Seedlings

Populus tomentosa seedlings used for cold acclimation at -3℃ were pretreated with or without 10?mmol·L -1 CaCl 2, 3?mmol·L -1 of Ca 2+ chelator EGTA, 0 1?mmol·L -1 of Ca 2+ channel inhibitor LaCl 3,and 0 05?mmol·L -1 of CaM antagonist CPZ. The changes in the contents of total soluble protein and CaM, and freezing resistance in all pretreated seedlings in various periods ( viz: following cold acclimation, chilling stress and recovery) were investigated. Results showed that cold acclimation increased the contents of total soluble protein and CaM, and freezing resistance of seedlings, which could be strongly reduced by the pretreatments of EGTA CPZ and LaCl 3 Cold acclimation combined with CaCl 2 pretreatment enhanced the effect of cold acclimation on freezing resistance, and obviously increased the contents of total soluble protein and CaM, reduced the declining degree of the contents of total soluble protein and CaM caused by chilling stress as compared with cold acclimation, augmented the increase in the level of total soluble protein and CaM during the recovery periods. Further analysis found that an increase in total soluble protein content during cold acclimation with or without CaCl 2 pretreatment mainly resulted from the increase in content of heat stable protein in total soluble protein. It is suggested that Ca 2+ calmodulin may be involved in the synthesis of total soluble protein, and the induction of freezing resistance of seedlings.

Cold Acclimation-Induced Changes in Total Soluble Protein, RNA, DNA, RNase and Freezing Resistance in Populus tomentosa Cuttings

The changes in the contents of total soluble protein and RNA, the activity of RNase in leaves and branches of Populus tomentosa cuttings at various periods (viz: cold acclimation, deacclimation, chilling stress and the recovery after chilling stress), and the survival rate and the freezing resistance of cuttings during cold acclimation at -3℃ were investigated. Results showed that cold acclimation not only increased the contents of total soluble protein and RNA, the survival rates and the freezing resistance of cuttings, decreased the activity of RNase, but also reduced the declining degree of total soluble protein and RNA contents, and the increasing level of RNase caused by chilling stress as compared with the controls. In addition, cold acclimation augmented the increase in the level of total soluble protein and RNA, and facilitated the decrease of RNase during the recovery periods. Further analysis found that the DNA content of all treatments kept relative stability at various periods. The changes in total soluble protein, RNA and RNase were closely related to the freezing resistance of cuttings. It appears that the increase of RNA content caused by cold acclimation induced decrease of RNase activity may be involved in the accumulation of total soluble protein and the induction of freezing resistance of cuttings.

Effect of Sugar on the Process of Cold-Acclimation-Induced Freezing Tolerance of Populus tomentosa

Populus tomentosa seedlings for cold-acclimating were pretreated wit h or without 20% saccharose. Changes in the concentrations of total soluble sugar , the survival rates, and freezing tolerance of seedlings during cold acclimatio n were investigated. The results showed that cold acclimation increased the conc entrations of total soluble sugar, the survival rates and freezing tolerance. Co ld acclimation, combined with the saccharose-pretreatment, enhanced the above- ment ioned effect of cold acclimation, and obviously increased the concentrations of total soluble sugar, the survival rates and freezing tolerance of seedlings. Fur ther analysis found that the concentrations of total soluble sugar in branches i ncreased greater than that in leaves during both cold acclimation with or withou t the pretreatment of saccharose. Moreover, an increase of the concentrations of total soluble sugar in branches and leaves was closely related to the freezing tolerance of seedlings. The results indicate the accumulation of soluble sugar i n seedlings induced by cold acclimation may be involved in the induction of free zing tolerance .

Seasonal Changes in the Ultrastructure of the Vascular Cambium in Shoots of Populus tomentosa

Wood is the product of cambial activity in trees, and the seasonal activity style of cambium directly influences wood biomass production, structures and properties. The seasonal changes in the ultrastructure of the vascular cambium activity of Populus tonientosa Carr. planted in Beijing area were examined in shoot tissues collected during 15 months by means of transmission electron microscopy. Before xylem mother cells reactivated completely, the dividing fusiform cells in cambium and new phloem cells had appeared at the same time. The initiation of cambial activity may be related to the bud sprouting and the young leaf growth in shoots. More details about the ultrastructural changes of cambial cells at the onset of cambial activity have been gained. When the large vacuole in active cambial cells divided into smaller ones during the dormant phase, proteinaceous material that disappeared in active cambial cells refilled many of these small vactioles. In addition, lipid droplets and starch granules had the same cycles as proteinaceous material. The plasmalemma invaginations of fusiform cells were observed not only in active phase but also in dormancy. The endomembrane system consisting of nuclear membrane, endoplasmic reticulum (ER), dictyosomes and their secretory vesicles, changed in form and distribution at different phases during a cycle and performed important roles at the onset of active cambium and during the wall formation process of secondary xylem cells. The tangential walls remained relatively thin throughout the year but the radial walls thickened markedly when the cambium was dormant. During the transition from dormancy to activity, a partial autolysis occurred in the radial walls of the cambial cells, especially at the cell wall junctions. A notable feature of the cells at the onset of cambial activity was the thinning of the radial walls.

Improvement in salt tolerance of Populus tomentosa from transformation by a mtl-D gene

Transgenic lines were achieved by transforming the E. coli 1-phosphate mannitol dehydrogenase gene （mtl-D） into the Populus tomentosa Cart. genome. An Agrobacterium tumefaciens strain （AGL1）, constructed by cloning mtl-D into the disarmed plasmid pBin438, was used to infect leaves of the clone YW2. The infected leaf discs were cultured on a medium containing 30 mg.L 1 kanamycin and 500 mg.L 1 cefotaxime. Transgenic plantlets regenerated from the infected leaves, rooted on the medium con- taining 30 mg.L 1 kanamycin. PCR and a Southern blotting test verified that the exogenous mtl-D gene had integrated into the trans- formation plants of the P. tomentosa genome. The mannitol content in control plant was 69 gg.gl FW, and the mannitol contents of the transgenic lines T1 to T5 ranged between 103.7 and 289.5 μg·g^-1 FW. Of the shoots of the control plants 20% survived; on the medium containing 0.6% NaCl, 60% and 70% of two transgenic shoots survived on a medium containing 0.8% NaCI.