The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood...The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes.展开更多
[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, r...[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.展开更多
In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex...In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex （LCC） and the residual lignin from kraft pulp （KP） and sulfite pulp （SP） were isolated and analyzed by Fourier transform infrared （FTIR） spectrum and ^13C nuclear magnetic resonance （NMR）. The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.展开更多
With four clones of triploid Populus tomentosa as materials, the effects of fertilization treatment on growth and physiological characters in terms of leaf nitrogen content, phosphorous content, potassium content, net...With four clones of triploid Populus tomentosa as materials, the effects of fertilization treatment on growth and physiological characters in terms of leaf nitrogen content, phosphorous content, potassium content, net photosynthetic rate, transpiration rate, water utilization efficiency and chlorophyll content have been studied. Compared with the general fertilizer as a control, the long-effect fertilizer, especially for Populus, produce more favorable results, for P. tomentosa on sandy land.展开更多
In our study, two experimental plantations, respectively, with 24 and 32 new clones of P tomentosa, were established in Weixian County, Hebei Province and Wuzhi County, Henan Province using a completely randomized blo...In our study, two experimental plantations, respectively, with 24 and 32 new clones of P tomentosa, were established in Weixian County, Hebei Province and Wuzhi County, Henan Province using a completely randomized block design. A comparative study was conducted on the continuous 5-year-old height and diameter at breast height （DBH） of new clones in the two plantations. As well, based on genetic correlation over the years of testing of these clones, a preliminary study of early selection was carried out. Results indicate that the growth traits of the new clones in Weixian were better than those in Wuzhi. The traits show weak correlation between the two plantations. In some stands, the height, DBH and seedling volume of 5-year-old clones presented statistically significant differences among clones. In both plantations, the new clones showed over 0.6 repeatability of height, DBH and volume, as well as larger coefficients of variation （CV）. The fact that these clones achieved the largest repeatability and CV in the second year suggests that these traits are highly controlled by heredity. Thus, based on the growth traits of the second year, the new clones B305, B307, B303, H75, BT18, BT17 and 21J-1 were considered suitable in Weixian. In Wuzhi, the new clones had variable repeatability and CVs in various years and their correlation of growth traits among different years was not high. We conclude that early selection of new clones was not feasible in Wuzhi.展开更多
The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 ye...The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 years for example, the fiber length at breast high grows faster than it does in the later years. But the standard deviation of distribution in fiber length at breast high in mature wood is larger than in the young tree. The technologically harvestable age of triploid clone of Populus tomentosa Carr., BL304 could be 4-7 year old to meet the requirement for paper industry. The distribution of fiber length become concentrated within an annual ring as the tree grows. The test results also show that the cloned poplar has a small Runkel ratio value (less than 0.4, generally about 0.3), and this ratio increases slightly with the tree grows.展开更多
Acyl-ACP thioesterases （FATs） terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzy...Acyl-ACP thioesterases （FATs） terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzymes that has been described previously in most of the plants. In silico cloning is a new method that utilizes the bioinformatics on the complete genome and available EST database. In this study, a full-length cDNA clone of PtFATB gene was isolated from Populus tomentosa using this approach. It is 1,450 bp in length and the open reading frame encodes a peptide of 421 amino acids. The predicted amino acid sequence shows significant homology with those from other plant species, which contain typical domains owned by FATB proteins. The transcripts of PtFATB were abundant in leaves, and less in roots detected by using semiquantitative RT-PCR. When the shoots were subjected to the stress treatments （cold, dry, NaC1） and ABA （Abscisic acid）, the expression of PtFATB was only slightly reduced under the treatment of low temperature. This suggests that the expression of PtFATB is in a constitutive fashion. This study provides the basis not only for the identification and characterization of this gene but also for the improvement of cold tolerance by controlling the expression of the PtFATB gene in trees in near future.展开更多
PtLFY, a LEAFY （LFY） gene, was cloned from Populus tomentosa （LM50） by PCR. Sequencing analysis indicated that PtLFY was 2629 bp long, composed of three exons and two introns and encoded 378 amino acids. The splic...PtLFY, a LEAFY （LFY） gene, was cloned from Populus tomentosa （LM50） by PCR. Sequencing analysis indicated that PtLFY was 2629 bp long, composed of three exons and two introns and encoded 378 amino acids. The splice donor sites and the splice acceptor sites were in identical positions to the LFY and its homologues. The amino acid sequence inferred was 68%-99% homologous to those of LFY and its homologues by blast analysis in GenBank. The Southern blot analysis indicated that there was a single copy of the PtLFY gene in genomic DNA of male and female P. tomentosa （LM50 and 5082）. The pBI121-Ptalfy （reverse）-intron-Ptlfy-GUS-nos was constructed using RNA interference （RNAi） technique and verified by PCR and digestion identification and transformed into tobacco. Some transgenic tobacco plants were obtained by PCR and PCR-Southern identification. The growth was generally repressed in transgenic tobacco plants compared with wild-type ones and some phenotypic differences were observed.展开更多
Both cDNA and DNA clones of PtDof1 （GenBank Accession No. FJ402844 and FJ402845） were isolated from plants grown in tissue culture ofPopulus tornentosa. The DNA sequence is 1597 bp including two exons and one intron...Both cDNA and DNA clones of PtDof1 （GenBank Accession No. FJ402844 and FJ402845） were isolated from plants grown in tissue culture ofPopulus tornentosa. The DNA sequence is 1597 bp including two exons and one intron. The cDNA is 969 bp in length with a 765 bp open reading frame which is capable of encoding 255 amino acids. The deduced amino acids sequence of the PtDofl protein shares 65%, 56% and 55% identity with Vitis vinifera （CAO48618）, Nicotiana tabacum （CAA08755） and Glycine max （ABI 16022） Dof protein by blast analysis in GenBank. Phylogenic analysis suggests PtDof1 gene could belong to the Dofgene family. PtDofl protein contains an unusual conserved single zinc finger with the pattern of C-X2-C-X21-C-X2-C, which may play a functional role in tissue-specific expression and possibly the auxin response of endogenous plant genes.展开更多
文摘The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes.
基金Supported by National Key Technology R&D Program during the 11th Five-year Plan Period(2006BAD32B01)~~
文摘[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.
文摘In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex （LCC） and the residual lignin from kraft pulp （KP） and sulfite pulp （SP） were isolated and analyzed by Fourier transform infrared （FTIR） spectrum and ^13C nuclear magnetic resonance （NMR）. The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.
基金a part of the "Tenth Five-Year Plan" National Key Project in Science and Technology (Grant No. 2002BA515B0303)
文摘With four clones of triploid Populus tomentosa as materials, the effects of fertilization treatment on growth and physiological characters in terms of leaf nitrogen content, phosphorous content, potassium content, net photosynthetic rate, transpiration rate, water utilization efficiency and chlorophyll content have been studied. Compared with the general fertilizer as a control, the long-effect fertilizer, especially for Populus, produce more favorable results, for P. tomentosa on sandy land.
基金the National Project of ScienceTechnology for the 11th Five-Year Plan (Grant No.2006BAD01A1502)
文摘In our study, two experimental plantations, respectively, with 24 and 32 new clones of P tomentosa, were established in Weixian County, Hebei Province and Wuzhi County, Henan Province using a completely randomized block design. A comparative study was conducted on the continuous 5-year-old height and diameter at breast height （DBH） of new clones in the two plantations. As well, based on genetic correlation over the years of testing of these clones, a preliminary study of early selection was carried out. Results indicate that the growth traits of the new clones in Weixian were better than those in Wuzhi. The traits show weak correlation between the two plantations. In some stands, the height, DBH and seedling volume of 5-year-old clones presented statistically significant differences among clones. In both plantations, the new clones showed over 0.6 repeatability of height, DBH and volume, as well as larger coefficients of variation （CV）. The fact that these clones achieved the largest repeatability and CV in the second year suggests that these traits are highly controlled by heredity. Thus, based on the growth traits of the second year, the new clones B305, B307, B303, H75, BT18, BT17 and 21J-1 were considered suitable in Weixian. In Wuzhi, the new clones had variable repeatability and CVs in various years and their correlation of growth traits among different years was not high. We conclude that early selection of new clones was not feasible in Wuzhi.
文摘The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 years for example, the fiber length at breast high grows faster than it does in the later years. But the standard deviation of distribution in fiber length at breast high in mature wood is larger than in the young tree. The technologically harvestable age of triploid clone of Populus tomentosa Carr., BL304 could be 4-7 year old to meet the requirement for paper industry. The distribution of fiber length become concentrated within an annual ring as the tree grows. The test results also show that the cloned poplar has a small Runkel ratio value (less than 0.4, generally about 0.3), and this ratio increases slightly with the tree grows.
基金This work was supported by project "Regulation of Composition and Saturation of Fatty Acid in Trees by Genetic Engineering", Introduction of Foreign Advanced Agricultural Science and Technology into China (No. 2005-4-52).
文摘Acyl-ACP thioesterases （FATs） terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzymes that has been described previously in most of the plants. In silico cloning is a new method that utilizes the bioinformatics on the complete genome and available EST database. In this study, a full-length cDNA clone of PtFATB gene was isolated from Populus tomentosa using this approach. It is 1,450 bp in length and the open reading frame encodes a peptide of 421 amino acids. The predicted amino acid sequence shows significant homology with those from other plant species, which contain typical domains owned by FATB proteins. The transcripts of PtFATB were abundant in leaves, and less in roots detected by using semiquantitative RT-PCR. When the shoots were subjected to the stress treatments （cold, dry, NaC1） and ABA （Abscisic acid）, the expression of PtFATB was only slightly reduced under the treatment of low temperature. This suggests that the expression of PtFATB is in a constitutive fashion. This study provides the basis not only for the identification and characterization of this gene but also for the improvement of cold tolerance by controlling the expression of the PtFATB gene in trees in near future.
文摘PtLFY, a LEAFY （LFY） gene, was cloned from Populus tomentosa （LM50） by PCR. Sequencing analysis indicated that PtLFY was 2629 bp long, composed of three exons and two introns and encoded 378 amino acids. The splice donor sites and the splice acceptor sites were in identical positions to the LFY and its homologues. The amino acid sequence inferred was 68%-99% homologous to those of LFY and its homologues by blast analysis in GenBank. The Southern blot analysis indicated that there was a single copy of the PtLFY gene in genomic DNA of male and female P. tomentosa （LM50 and 5082）. The pBI121-Ptalfy （reverse）-intron-Ptlfy-GUS-nos was constructed using RNA interference （RNAi） technique and verified by PCR and digestion identification and transformed into tobacco. Some transgenic tobacco plants were obtained by PCR and PCR-Southern identification. The growth was generally repressed in transgenic tobacco plants compared with wild-type ones and some phenotypic differences were observed.
基金supported by the National Natural Science Foundation of China (Grant No. 30271097)
文摘Both cDNA and DNA clones of PtDof1 （GenBank Accession No. FJ402844 and FJ402845） were isolated from plants grown in tissue culture ofPopulus tornentosa. The DNA sequence is 1597 bp including two exons and one intron. The cDNA is 969 bp in length with a 765 bp open reading frame which is capable of encoding 255 amino acids. The deduced amino acids sequence of the PtDofl protein shares 65%, 56% and 55% identity with Vitis vinifera （CAO48618）, Nicotiana tabacum （CAA08755） and Glycine max （ABI 16022） Dof protein by blast analysis in GenBank. Phylogenic analysis suggests PtDof1 gene could belong to the Dofgene family. PtDofl protein contains an unusual conserved single zinc finger with the pattern of C-X2-C-X21-C-X2-C, which may play a functional role in tissue-specific expression and possibly the auxin response of endogenous plant genes.
