Porous TiO2-coated Magnetic Core-Shell Nanocomposites：Preparation and Enhanced Photocatalytic Activity

The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained structure was composed of a SiO2@Fe3O4 core and a porous TiO2 shell.The diameter of SiO2@Fe3O4 core was about 205 nm with thickness of porous TiO2 of about 5-6 nm.The 9%TiO2/6%SiO2@Fe3O4 microspheres possess the highest BET surface area and the BJH pore volume,which are 373.5 m2.g-1 and 0.28 cm3.g-1,respectively.The 9%TiO2/6%SiO2@Fe3O4 photocatalyst exhibited an excellent performance for the degradation of methyl orange and methylene blue dyes.Two different dyes were completely decolorized in 60 min under UV irradiation.The photocatalytic activity and the amount of catalyst were almost not decrease after recycling for 6 times by using external magnetic field.

Time-resolved Microwave Conductivity Studies on the Chemical Treatment of the Nanocrystalline Porous TiO2 Films

Effect of Ti(iso-C3H7O)4 treatment on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films is studied by time-resolved microwave conductivity measurements. Analysis of the transient photoconductivity decays indicates that Ti(iso-C3H7O)4 treatment leads to an increased concentration of photogenerated charge carriers and a fast interfacial transfer rate of holes via the surface modification of the freshly growing TiO2 nanocrystallites.

Surface Microstructure Characterization of Sol-gel Derived Porous TiO_2 Thin Films

Porous TiO2 thin films were prepared from alkoxide solutions with and without polyethylene glycol (PEG) by sol-get route on soda lime glass, and were characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results show that TiO2 film prepared from precursor solution without PEG is composed of spherical particles of about 100 nm and several nanometer mesoporous pores. With the increase of the amount of PEG added to the precursor solution, the diameter and the depth of the pores in the resultant films increas on the decomposition of PEG during heat-treatment, which lead to them increase of the surface roughness of the films. XRD and TEM results show that the single anatase phase is precipitated and there are some orientation effects in (101) direction.

In-situ fabrication of dual porous titanium dioxide films as anode for carbon cathode based perovskite solar cell

We develop a dual porous （DP） TiO2 film for the electron transporting layer （ETL） in carbon cathode based perovskite solar cells （C-PSCs）. The DP TiO2 film was synthesized via a facile PS-templated method with the thickness being controlled by the spin-coating speed. It was found that there is an optimum DP TiO2 film thickness for achieving an effective ETL, a suitable perovskite]TiO2 interface, an efficient light harvester and thus a high performance C-PSC. In particular, such a DP TiO2 film can act as a scaffold for complete-filling of the pores with perovskite and for forming high-quality perovskite crystals that are seamlessly interfaced with Ti02 to enhance interracial charge injection. Leveraging the unique advantages of DP TiO2 ETL, together with a dense-packed and pinhole-free TiO2 compact layer, PCE of the C-PSCs has reached 9.81% with good stability.

Preparation of TiO2 and SiC Films from Their Precursors Using Electrospraying

Titanium dioxide(TiO2) films were prepared by cone - jet mode electrospraying a titanium ethoxideprecursor solution onto a silicon substrate.The effects of spraying time,substrate temperature and aging on thesurface morphology of the films prepared were studied.Thin films obtained after spraying for 600 s were aged atroom temperature to form a porous TiO2 network with pores in the size range of 100 - 500 nm.Thicker filmswere prepared by spraying for 3 000 s,but these cracked on drying although it can be concluded that films pre-pared using a higher substrate temperature were denser.By this method,SiC coating was also prepared on anAl2O3 substrate using polysilane as a precursor.The result implies the potential of an industrial production ofdye sensitized solar cells by electrospraying technique.

Strengthening Porous PVA with TiO_2 Structure by an Ice-Templating Method

A poly vinyl alcohol（PVA） scaffold with aligned porous is strengthened by in-situ combining with TiO2. The increased freezing rate can be used to further increase the strength of aligned porous materials. The strengthened porous PVA exhibits aligned interconnected porous structures and shows a significant enhancement in tensile testing and compression strength testing.

Effect of TiO_2 Functionalization on Nano-Porous Silicon for Selective Alcohol Sensing at Room Temperature

Room temperature operated sensor for detection of alcohol vapours in low ppm range based on TiO_2 functionalized nano-porous silicon（PSi） is demonstrated. The effect of functionalization by TiO_2 on PSi is investigated using SEM, EDX, Raman spectroscopy, XRD and contact angle measurements. Sensing is accomplished by measuring change in resistance of the sensing layer using Cr-Au inter-digitatedelectrode（IDE） structure formed on top of the functionalized PSi layer. The sensors were tested for volatile organic compounds（VOCs） and water vapours in the wide range of 5–500 ppm concentration at room temperature. Functionalization of the nanostructured PSi by sputter deposited TiO_2 results in significant enhancement of sensitivity and inverse change in selectivity. PSi sensors have displayed strong response to water vapours whereas after functionalization, selective sensing to ethanol is depicted. Minimum detection by PSi sensors is portrayed at 100 ppm and that of functionalized sensors is at 10 ppm. Sensing mechanism is explained on the basis of surfaces and structures of both PSi and TiO_2. This study incites the importance of surface treatment of PSi for tuning the sensing properties and is useful in the development of selective alcohol sensors.