Modification of poly(tetrafluoroethylene)(PTFE) films with 2-methacryloyloxyethyl phosphorylcholine(MPC) was performed by low-temperature plasma treatment and grafting polymerization.Surface properties of PTFE were ch...Modification of poly(tetrafluoroethylene)(PTFE) films with 2-methacryloyloxyethyl phosphorylcholine(MPC) was performed by low-temperature plasma treatment and grafting polymerization.Surface properties of PTFE were characterized by attenuated total reflectance Fourier transform infrared(ATR-FTIR) spectra,X-ray photoelectron spectroscopy(XPS) ,and static contact angle.The results show that MPC has been grafted onto PTFE film surface successfully.Contact angle for the modified PTFE films in the water decreased from 108°to 58.25°,while surface energy increased from 17.52 mN/m to 45.47 mN/m.The effects of plasma treatment time,monomer concentration and grafting time on degree of grafting were determined.In the meanwhile,blood compatibility of the PTFE films was studied by checking thrombogenic time of blood plasma.展开更多
Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloro...Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloromethyl groups were introduced onto PPESK main chains by chloromethylation.Chloromethvlated PPESK(CMPPESK) was fabricated into porous membrane through phase inversion technique.Hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate)(P(PEGMA)) brushes were grafted from CMPPESK membrane ...展开更多
Oxygen is a significant factor essential to provide the additional energy source for the wound repairing process.Many polymeric materials have been employed recently in wound dressing such as natural rubber(NR)[1],pol...Oxygen is a significant factor essential to provide the additional energy source for the wound repairing process.Many polymeric materials have been employed recently in wound dressing such as natural rubber(NR)[1],poly(lactic acid)(PLA)and chitosan[2]because of their biocompatibility and biodegradability.In this study,the oxygen transmission rate(OTR)of modified NR,PLA and chitosan porous structure was determined.The comparison for their OTR was investigated.展开更多
Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films were immersed in aqueous solution of acrylic acid (AA) and sodium styrene sulfonate (SSS), then irradiated by Co γ-rays at 25℃. The effects of reaction 60...Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films were immersed in aqueous solution of acrylic acid (AA) and sodium styrene sulfonate (SSS), then irradiated by Co γ-rays at 25℃. The effects of reaction 60 time,absorbed dose, dose-rate, inhibitor and monomer concentration on the grafting yield were studied. Grafting yields of both AA and SSS onto FEP, respectively, increase with irradiation dose, but some saturation will appear at high dose and monomer concentration. The grafting yield increases with reaction time and then levels off. The graft- ing of SSS onto FEP is more difficult than the grafting of AA. The analysis of grafted membranes using DSC and FT-IR have been done.展开更多
This paper aims to prepare a PVA-GAG-COL composite with polyvinyl alcohol (PVA), glycosaminoglycan (GAG) and collagen (COL) by the method of freeze drying and to investigate the feasibility as a tissue engineering sca...This paper aims to prepare a PVA-GAG-COL composite with polyvinyl alcohol (PVA), glycosaminoglycan (GAG) and collagen (COL) by the method of freeze drying and to investigate the feasibility as a tissue engineering scaffold for tissue or organ repairing. In this study, SEM was used to observe the morphology. Biocompatibility was tested by cell culture with the extracted fluid of composite materials. Different proportional scaffolds could be obtained with different concentrations and alcoholysis degree of PVA. Different proportional scaffolds also had different porous structures. SEM proved that large amount of porous structure could be formed. Biocompatibility test showed that the extracted fluid of composite materials was nontoxic, which could promote the adhesion and proliferation of the fibroblast. Fibroblast could grow on the scaffold normally.A porous scaffold for tissue engineering with high water content can be fabricated by PVA, GAG and COL, which has excellent cell biocompatibility. The porous structure shows potential in tissue engineering and cell culture.展开更多
Synthesis of spherical carbon beads with effective CO_2 capture capability is highly desirable for large scale application of CO2 sorption, but remains challenging. Herein, a facile and efficient strategy to prepare n...Synthesis of spherical carbon beads with effective CO_2 capture capability is highly desirable for large scale application of CO2 sorption, but remains challenging. Herein, a facile and efficient strategy to prepare nitrogen-doped hierarchically porous carbon spheres was developed via co-pyrolyzation of poly(vinylidene chloride) and melamine in alginate gel beads. In this approach, melamine not only serves as the nitrogen precursor, but also acts as a template for the macropores structures. The nitrogen contents in the hierarchically porous carbon spheres reach a high level, ranging from 11.8 wt% to 14.7 wt%, as the melamine amount increases. Owing to the enriched nitrogen functionalities and the special hierarchical porous structure, the carbon spheres exhibit an outstanding CO_2 capture performance, with the dynamic capacity of as much as about 7 wt% and a separation factor about 49 at 25 °C in a gas mixture of CO_2/N_2(0.5:99.5, v/v).展开更多
Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-la...Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-layer tubular scaffold with an inner layer and an outer layer was fabricated. The inner layer was random collagen/poly （ L-lactide-co-caprolactone ） I P （ LLA- CL） ] nanofibrous mat fabricated by conventional electrospinning and the outer layer was aligned collagen/P （LLA-CL） nanoyarns prepared by a dynamic liquid dectrospinning method. Fourier transform infrared spectroscopy （FTIR） was used to characterize the chemical structure. Scanning electron microscopy （ SEM ） was employed to observe the morphology of the layers and the cross- sectioned bi-layer tubular scaffold. A liquid displacement method was employed to measure the porosities of the inner and outer layers. Stress-strain curves were obtained to evaluate the mechanical properties of the two different layers and the bi-layer membrane. The diameters of the nanofibers and the nanoyarns were （480 ± 197 ） nm and （ 19.66 ± 4.05 ） μm, respectively. The outer layer had a significantly higher porosity and a larger pore size than those of the inner layer. Furthermore, the bi-layer membrane showed a good mechanical property which was suitable as small-diameter vascular graft. The results indicated that the bi-layer tubular scaffold had a great potential application in small vascular tissue engineering.展开更多
Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At ap...Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film展开更多
Polyelectrolyte porous membranes(PPMs)belong to the most interesting classes of materials,because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applicati...Polyelectrolyte porous membranes(PPMs)belong to the most interesting classes of materials,because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applications.However,owing to the water solu-bility and ionic nature of the polyelectrolytes,traditional polyelectrolytes are difficult to use in scalable preparation of high-quality PPMs through the well-developed industrial methods.Poly(ionic liquid)s(PIL)are a subclass of functional polyelectrolytes bearing ionic liquid groups in their repeating unites,inheriting the advantages of ionic liquids(ILs)and macromolecular architecture features.In recent years,along with rapid development of PIL materials chemistry,considerable and significant developments involving the novel preparation methods,and structure-property-function relationships of PPMs have been made.In this review,we highlight the latest discovery and proceedings of PPMs,particularly the advancements in how to tailor structures and properties of PPMs by ra-tional structure design of PILs.The formation mechanisms of various PPMs were also discussed in detail from the viewpoint of PILs molecular structures.A future perspective of the challenges and promising potential of PPMs is cast on the basis of these achieve-ments.We expect that these analyses and deductions will be useful for the design of useful PPMs and serve as a source of inspira-tion for the design of future multifunctional PPMs.展开更多
文摘Modification of poly(tetrafluoroethylene)(PTFE) films with 2-methacryloyloxyethyl phosphorylcholine(MPC) was performed by low-temperature plasma treatment and grafting polymerization.Surface properties of PTFE were characterized by attenuated total reflectance Fourier transform infrared(ATR-FTIR) spectra,X-ray photoelectron spectroscopy(XPS) ,and static contact angle.The results show that MPC has been grafted onto PTFE film surface successfully.Contact angle for the modified PTFE films in the water decreased from 108°to 58.25°,while surface energy increased from 17.52 mN/m to 45.47 mN/m.The effects of plasma treatment time,monomer concentration and grafting time on degree of grafting were determined.In the meanwhile,blood compatibility of the PTFE films was studied by checking thrombogenic time of blood plasma.
基金supported by the National Basic Research Program of China(No2009CB623402)China Postdoctoral Science Foundation(No20080430220)
文摘Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloromethyl groups were introduced onto PPESK main chains by chloromethylation.Chloromethvlated PPESK(CMPPESK) was fabricated into porous membrane through phase inversion technique.Hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate)(P(PEGMA)) brushes were grafted from CMPPESK membrane ...
文摘Oxygen is a significant factor essential to provide the additional energy source for the wound repairing process.Many polymeric materials have been employed recently in wound dressing such as natural rubber(NR)[1],poly(lactic acid)(PLA)and chitosan[2]because of their biocompatibility and biodegradability.In this study,the oxygen transmission rate(OTR)of modified NR,PLA and chitosan porous structure was determined.The comparison for their OTR was investigated.
基金Supported partially by Exploration Project of Knowledge Innovation Program of the Chinese Academy of Sciences (No.55180219)
文摘Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films were immersed in aqueous solution of acrylic acid (AA) and sodium styrene sulfonate (SSS), then irradiated by Co γ-rays at 25℃. The effects of reaction 60 time,absorbed dose, dose-rate, inhibitor and monomer concentration on the grafting yield were studied. Grafting yields of both AA and SSS onto FEP, respectively, increase with irradiation dose, but some saturation will appear at high dose and monomer concentration. The grafting yield increases with reaction time and then levels off. The graft- ing of SSS onto FEP is more difficult than the grafting of AA. The analysis of grafted membranes using DSC and FT-IR have been done.
基金National High-tech Reasearch and Development Program of China(863 Program)grant number:2077AA09Z436+1 种基金Guangdong Project '211'grant number:50621030
文摘This paper aims to prepare a PVA-GAG-COL composite with polyvinyl alcohol (PVA), glycosaminoglycan (GAG) and collagen (COL) by the method of freeze drying and to investigate the feasibility as a tissue engineering scaffold for tissue or organ repairing. In this study, SEM was used to observe the morphology. Biocompatibility was tested by cell culture with the extracted fluid of composite materials. Different proportional scaffolds could be obtained with different concentrations and alcoholysis degree of PVA. Different proportional scaffolds also had different porous structures. SEM proved that large amount of porous structure could be formed. Biocompatibility test showed that the extracted fluid of composite materials was nontoxic, which could promote the adhesion and proliferation of the fibroblast. Fibroblast could grow on the scaffold normally.A porous scaffold for tissue engineering with high water content can be fabricated by PVA, GAG and COL, which has excellent cell biocompatibility. The porous structure shows potential in tissue engineering and cell culture.
基金supported by the National Key R&D Program of China (2016YFB0600902)the Dalian National Laboratory for Clean Energy (DNL180401)the National Natural Science Foundation of China (21925803)。
文摘Synthesis of spherical carbon beads with effective CO_2 capture capability is highly desirable for large scale application of CO2 sorption, but remains challenging. Herein, a facile and efficient strategy to prepare nitrogen-doped hierarchically porous carbon spheres was developed via co-pyrolyzation of poly(vinylidene chloride) and melamine in alginate gel beads. In this approach, melamine not only serves as the nitrogen precursor, but also acts as a template for the macropores structures. The nitrogen contents in the hierarchically porous carbon spheres reach a high level, ranging from 11.8 wt% to 14.7 wt%, as the melamine amount increases. Owing to the enriched nitrogen functionalities and the special hierarchical porous structure, the carbon spheres exhibit an outstanding CO_2 capture performance, with the dynamic capacity of as much as about 7 wt% and a separation factor about 49 at 25 °C in a gas mixture of CO_2/N_2(0.5:99.5, v/v).
基金National Natural Science Foundations of China，Science and Technology Commission of Shanghai Municipality,China，Ph.D.Programs Foundation of Ministry of Education of China
文摘Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-layer tubular scaffold with an inner layer and an outer layer was fabricated. The inner layer was random collagen/poly （ L-lactide-co-caprolactone ） I P （ LLA- CL） ] nanofibrous mat fabricated by conventional electrospinning and the outer layer was aligned collagen/P （LLA-CL） nanoyarns prepared by a dynamic liquid dectrospinning method. Fourier transform infrared spectroscopy （FTIR） was used to characterize the chemical structure. Scanning electron microscopy （ SEM ） was employed to observe the morphology of the layers and the cross- sectioned bi-layer tubular scaffold. A liquid displacement method was employed to measure the porosities of the inner and outer layers. Stress-strain curves were obtained to evaluate the mechanical properties of the two different layers and the bi-layer membrane. The diameters of the nanofibers and the nanoyarns were （480 ± 197 ） nm and （ 19.66 ± 4.05 ） μm, respectively. The outer layer had a significantly higher porosity and a larger pore size than those of the inner layer. Furthermore, the bi-layer membrane showed a good mechanical property which was suitable as small-diameter vascular graft. The results indicated that the bi-layer tubular scaffold had a great potential application in small vascular tissue engineering.
文摘Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film
基金We greatly acknowledge the financial supports by the National Natural Science Foundation of China(Grant No.21875119)the Natural Science Foundation of Tianjin City(Grant Nos.19JCYBJC17500,21JCZDJC00250)the National Programfor Support of Top-notch Young Professionals。
文摘Polyelectrolyte porous membranes(PPMs)belong to the most interesting classes of materials,because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applications.However,owing to the water solu-bility and ionic nature of the polyelectrolytes,traditional polyelectrolytes are difficult to use in scalable preparation of high-quality PPMs through the well-developed industrial methods.Poly(ionic liquid)s(PIL)are a subclass of functional polyelectrolytes bearing ionic liquid groups in their repeating unites,inheriting the advantages of ionic liquids(ILs)and macromolecular architecture features.In recent years,along with rapid development of PIL materials chemistry,considerable and significant developments involving the novel preparation methods,and structure-property-function relationships of PPMs have been made.In this review,we highlight the latest discovery and proceedings of PPMs,particularly the advancements in how to tailor structures and properties of PPMs by ra-tional structure design of PILs.The formation mechanisms of various PPMs were also discussed in detail from the viewpoint of PILs molecular structures.A future perspective of the challenges and promising potential of PPMs is cast on the basis of these achieve-ments.We expect that these analyses and deductions will be useful for the design of useful PPMs and serve as a source of inspira-tion for the design of future multifunctional PPMs.
