PROTOTYPE SURFACE MICRO- PRECISION IN FUSED DEPOSITION MODELING PROCESS

To aim at prototype parts fabricated with fused deposition modeling （FDM） process, the problems how to improve and enhance their surface micro-precision are studied. The producing mechanism of surface roughness is explained with three aspects concretely including the principle error of rapid prototyping （RP） process, the inherent characteristics of FDM process, and some mi- cro-scratches on the surface of the extruded fiber. Based on the micro-characters of section shape of the FDM prototype, a physical model reflecting the outer shape characters is abstracted. With the physical simplified and deduced, the evaluating equations of surface roughness are acquired. According to the FDM sample parts with special design for experimental measurement, the real surface roughness values of different inclined planes are obtained. And the measuring values of surface roughness are compared with the calculation values. Furthermore, the causes of surface roughness deviation between measuring values and calculation values are respectively analyzed and studied. With the references of analytic conclusions, the measuring values of the experimental part surface are revised, and the revised values nearly accord with the calculation values. Based on the influencing principles of FDM process parameters and special post processing of FDM prototype parts, some concrete measures are proposed to reduce the surface roughness of FDM parts, and the applying effects are better.

Comparison between N_2 and O_2 anneals on the integrity of an Al_2O_3/Si_3N_4/SiO_2/Si memory gate stack

In this paper the endurance characteristics and trap generation are investigated to study the effects of different postdeposition anneals （PDAs） on the integrity of an Al2O3/Si3N4/SiOz/Si memory gate stack. The flat-band voltage （Vfb） turnarounds are observed in both the programmed and erased states of the N2-PDA device. In contrast, this turnaround is observed only in the erased state of the O2-PDA device. The Vfb in the programmed state of the O2-PDA device keeps increasing with increasing program/erase （P/E） cycles. Through the analyses of endurance characteristics and the low voltage round-trip current transients, it is concluded that in both kinds of device there are an unknown type of pre-existing characteristic deep traps and P/E stress-induced positive oxide charges. In the O2-PDA device two extra types of trap are also found： the pre-existing border traps and the P/E stress-induced negative traps. Based on these four types of defects we can explain the endurance characteristics of two kinds of device. The switching property of pre-existing characteristic deep traps is also discussed.

AntarcticaLC2000：The new Antarctic land cover database for the year 2000

Antarctica plays a key role in global energy balance and sea level change.It has been conventionally viewed as a whole ice body with high albedo in General Circulation Models or Regional Climate Models and the differences of land cover has usually been overlooked.Land cover in Antarctica is one of the most important drivers of changes in the Earth system.Detailed land cover information over the Antarctic region is necessary as spatial resolution improves in land process models.However,there is a lack of complete Antarctic land cover dataset derived from a consistent data source.To fill this data gap,we have produced a database named Antarctic Land Cover Database for the Year 2000(AntarcticaLC2000) using Landsat Enhanced Thematic Mapper Plus(ETM+) data acquired around 2000 and Moderate Resolution Imaging Spectrometer(MODIS) images acquired in the austral summer of 2003/2004 according to the criteria for the 1:100000-scale.Three land cover types were included in this map,separately,ice-free rocks,blue ice,and snow/firn.This classification legend was determined based on a review of the land cover systems in Antarctica(LCCSA) and an analysis of different land surface types and the potential of satellite data.Image classification was conducted through a combined usage of computer-aided and manual interpretation methods.A total of 4067 validation sample units were collected through visual interpretation in a stratified random sampling manner.An overall accuracy of 92.3%and the Kappa coefficient of 0.836 were achieved.Results show that the areas and percentages of ice-free rocks,blue ice,and snow/firn are 73268.81 km2(0.537%),225937.26 km2(1.656%),and 13345460.41 km2(97.807%),respectively.The comparisons with other different data proved a higher accuracy of our product and a more advantageous data quality.These indicate that AntarcticaLC2000,the new land cover dataset for Antarctica entirely derived from satellite data,is a reliable product for a broad spectrum of applications.