Recent progresses in thermal treatment of β-Ga_(2)O_(3) single crystals and devices

In recent years,ultra-wide bandgap β-Ga_(2)O_(3) has emerged as a fascinating semiconductor material due to its great potential in power and photoelectric devices.In semiconductor industrial,thermal treatment has been widely utilized as a convenient and effective approach for substrate property modulation and device fabrication.Thus,a thorough summary of β-Ga_(2)O_(3) substrates and devices behaviors after high-temperature treatment should be significant.In this review,we present the recent advances in modulating properties of β-Ga_(2)O_(3) substrates by thermal treatment,which include three major applications:(ⅰ)tuning surface electrical properties,(ⅱ)modifying surface morphology,and(ⅲ)oxidating films.Meanwhile,regulating electrical contacts and handling with radiation damage and ion implantation have also been discussed in device fabrication.In each category,universal annealing conditions were speculated to figure out the corresponding problems,and some unsolved questions were proposed clearly.This review could construct a systematic thermal treatment strategy for various purposes and applications of β-Ga_(2)O_(3).

The effects of radio frequency atmospheric pressure plasma and thermal treatment on the hydrogenation of TiO_(2) thin film

The effects of radio frequency(RF)atmospheric pressure(AP)He/H_(2)plasma and thermal treatment on the hydrogenation of TiO_(2)thin films were investigated and compared in this work.The color of the original TiO_(2)film changes from white to black after being hydrogenated in He/H_(2)plasma at160 W(gas temperature~381℃)within 5 min,while the color of the thermally treated TiO_(2)film did not change significantly even in pure H_(2)or He/H_(2)atmosphere with higher temperature(470℃)and longer time(30 min).This indicated that a more effective hydrogenation reaction happened through RF AP He/H_(2)plasma treatment than through pure H_(2)or He/H_(2)thermal treatment.The color change of TiO_(2)film was measured based on the Commission Internationale d’Eclairage L*a*b*color space system.Hydrogenated TiO_(2)film displayed improved visible light absorption with increased plasma power.The morphology of the cauliflower-like nanoparticles of the TiO_(2)film surface remained unchanged after plasma processing.X-ray photoelectron spectroscopy results showed that the contents of Ti3+species and Ti-OH bonds in the plasma-hydrogenated black TiO_(2)increased compared with those in the thermally treated TiO_(2).X-ray diffraction(XRD)patterns and Raman spectra indicated that plasma would destroy the crystal structure of the TiO_(2)surface layer,while thermal annealing would increase the overall crystallinity.The different trends of XRD and Raman spectra results suggested that plasma modification on the TiO_(2)surface layer is more drastic than on its inner layer,which was also consistent with transmission electron microscopy results.Optical emission spectra results suggest that numerous active species were generated during RF AP He/H_(2)plasma processing,while there were no peaks detected from thermal processing.A possible mechanism for the TiO_(2)hydrogenation process by plasma has been proposed.Numerous active species were generated in the bulk plasma region,accelerated in the sheath region,and bumped toward the TiO_(2)film,which will react with the TiO_(2)surface to form OVs and disordered layers.This leads to the tailoring of the band gap of black TiO_(2)and causes its light absorption to extend into the visible region.

Mechanical properties and fracture surface roughness of thermally damaged granite under dynamic splitting

In order to understand the mechanical properties and the fracture surface roughness characteristics of thermally damaged granite under dynamic splitting,dynamic Brazilian splitting tests were conducted on granite samples after thermal treatment at 25,200,400,and 600℃.Results show that the dynamic peak splitting strength of thermally damaged granite samples increases with increasing strain rate,showing obvious strain‐rate sensitivity.With increasing temperature,thermally induced cracks in granite transform from intergranular cracks to intragranular cracks,and to a transgranular crack network.Thermally induced damages reduce the dynamic peak splitting strength and the maximum absorbed energy while increasing the peak radial strain.The fracture mode of the thermally damaged granite under dynamic loads is mode Ⅱ splitting failure.By using the axial roughness index Z2 a,the distribution ranges of the wedge‐shaped failure zones and the tensile failure zones in the fracture surfaces under dynamic Brazilian splitting can be effectively identified.The radial roughness index Z_(2)^(r)is sensitive to the strain rate and temperature.It shows a linear correlation with the peak splitting strength and the maximum absorbed energy and a linear negative correlation with the peak radial strain.Z_(2)^(r)can be used to quantitatively estimate the dynamic parameters based on the models proposed.

Farmers’ Practices for the Orchard’s Maintenance and Post-Harvest Treatment of Cocoa in Infiltrated Classified and Unclassified Zone of Méagui (South-West, Côte d’Ivoire)

An important part of Ivorian cocoa production comes from infiltrated classified forests. The objective of this study is to investigate orchard maintenance and post-harvest cocoa treatment practices used by cocoa farmers in infiltrated classified and unclassified areas of Méagui. To do this, 110 producers in two localities of the said zone were individually interviewed from February to April 2022, using a declarative questionnaire. It was found that cocoa orchards in the zone are aging. Nearly 68.55% of producers were heirs and 58.33% of those interviewed were under 46 years of age, with an average age of 43 years. Nearly 84.55% of the producers surveyed mainly use chemical insecticides to control the pests of greatest concern in these localities. Regarding the frequency of insecticide treatments, 11.82% of producers make 1 to 2 applications a year, 29.09% make 3 to 5 applications a year, and 43.64% make at least 6 applications a year. The active substances of the most used products belong to 99% of the Neonicotinoid and Pyrethroid families. Regarding cocoa harvesting and post-harvest operations, 93.64% of the producers carry out a single harvest/month;all do the shelling with mini machetes. Beans are fermented mainly in black plastic tarpaulins or in bags, for a period of 3 to 5 days (65.45%). Drying is done almost entirely (91.82%) on the black plastic tarp. This study shows that cocoa farmers in the areas surveyed do not respect the recommendations issued on phytosanitary practices and post-harvest treatment of cocoa. This non-compliance with the standards of good practices prescribed is particularly more accentuated in the locality located in infiltrated classified zone. It would, therefore, be judicious to revise or redefine the phytosanitary recommendations and carry out sensitization and training-follow-up programs for producers in this important cocoa production area of C?te d’Ivoire.

Farmers’ Practices for the Orchard’s Maintenance and Post-Harvest Treatment of Cocoa in Infiltrated Classified and Unclassified Zone of Méagui (South-West, Côte d’Ivoire)

An important part of Ivorian cocoa production comes from infiltrated classified forests. The objective of this study is to investigate orchard maintenance and post-harvest cocoa treatment practices used by cocoa farmers in infiltrated classified and unclassified areas of Méagui. To do this, 110 producers in two localities of the said zone were individually interviewed from February to April 2022, using a declarative questionnaire. It was found that cocoa orchards in the zone are aging. Nearly 68.55% of producers were heirs and 58.33% of those interviewed were under 46 years of age, with an average age of 43 years. Nearly 84.55% of the producers surveyed mainly use chemical insecticides to control the pests of greatest concern in these localities. Regarding the frequency of insecticide treatments, 11.82% of producers make 1 to 2 applications a year, 29.09% make 3 to 5 applications a year, and 43.64% make at least 6 applications a year. The active substances of the most used products belong to 99% of the Neonicotinoid and Pyrethroid families. Regarding cocoa harvesting and post-harvest operations, 93.64% of the producers carry out a single harvest/month;all do the shelling with mini machetes. Beans are fermented mainly in black plastic tarpaulins or in bags, for a period of 3 to 5 days (65.45%). Drying is done almost entirely (91.82%) on the black plastic tarp. This study shows that cocoa farmers in the areas surveyed do not respect the recommendations issued on phytosanitary practices and post-harvest treatment of cocoa. This non-compliance with the standards of good practices prescribed is particularly more accentuated in the locality located in infiltrated classified zone. It would, therefore, be judicious to revise or redefine the phytosanitary recommendations and carry out sensitization and training-follow-up programs for producers in this important cocoa production area of C?te d’Ivoire.

THERMAL RATE TREATMENT AND ITS EFFECT ON MODIFICATION OF Al-Si ALLOYS

ＴＨＥＲＭＡＬＲＡＴＥＴＲＥＡＴＭＥＮＴＡＮＤＩＴＳＥＦＦＥＣＴＯＮＭＯＤＩＦＩＣＡＴＩＯＮＯＦＡｌＳｉＡＬＬＯＹＳ①ＧｅｎｇＨａｏｒａｎ，ＭａＪｉａｊｉ，ＢｉａｎＸｏｕｆａｎｇＣｏｌｌｅｇｅｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒ...

Effects of cryogenic treatment on the thermal physical properties of Cu_(76.12) Al_(23.88) alloy

The thermal diffusion coefficient, heat capacity, thermal conductivity, and thermal expansion coefficient of Cu76.12Al23.88 alloy before and after cryogenic treatment in the heating temperature range of 25℃ to 600℃ were measured by thermal constant tester and thermal expansion instrument. The effects of cryogenic treatment on the thermal physical properties of CU76,12A123,88 alloy were investigated by comparing the variation of the thermal parameters before and after cryogenic treatment. The results show that the variation trend of the thermal diffusion coefficient, heat capacity, thermal conductivity, and thermal expansion coefficient of CU76.12Al23.88 alloy after cryogenic treatment was the same as before. The cryogenic treatment can increase the thermal diffusion coefficient, thermal conductivity, and thermal expansion coeffi- cient of Cu76.12Al23.88 alloy and decrease its heat capacity. The maximum difference in the thermal diffusion coefficient between the before and after cryogenic treatment appeared at 400℃. Similarly, thermal conductivity was observed at 200℃.

Role of ^(18)F-FDG PET/CT in pre and post treatment evaluation in head and neck carcinoma

Head and neck cancer(HNC) ranks as the 6th most common cancer worldwide, with the vast majority being head and neck squamous cell carcinoma(HNSCC). The majority of patients present with complicated locally advanced disease(typically stage Ⅲ and Ⅳ) requiring multidisciplinary treatment plans with combinations of surgery, radiation therapy and chemotherapy. Tumor staging is critical to decide therapeutic planning. Multiple challenges include accurate tumor localization with precise delineation of tumor volume, cervical lymph node staging, detection of distant metastasis as well as ruling out synchronous second primary tumors. Somepatients present with cervical lymph node metastasis without obvious primary tumors on clinical examination or conventional cross sectional imaging. Treatment planning includes surgery, radiation, chemotherapy or combinations that could significantly alter the anatomy and physiology of this complex head and neck region, making assessment of treatment response and detection of residual/ recurrent tumor very difficult by clinical evaluation and computed tomography(CT) or magnetic resonance imaging(MRI). 18F-2-fluoro-2-deoxyD-glucose positron emission tomography/CT(18F-FDG PET/CT) has been widely used to assess HNC for more than a decade with high diagnostic accuracy especially in detection of initial distant metastasis and evaluation of treatment response. There are some limitations that are unique to PET/CT including artifacts, lower soft tissue contrast and resolution as compared to MRI, false positivity in post-treatment phase due to inflammation and granulation tissues, etc. The aim of this article is to review the roles of PET/CT in both pre and post treatment management of HNSCC including its limitations that radiologists must know. Accurate PET/CT interpretation is the crucial initial step that leads to appropriate tumor staging and treatment planning.

Temperature field analysis of main steam pipe under local post weld heat treatment

In local post weld heat treatment, the temperature difference is the criterion of the process. The temperature field in the main stream pipe under local post weld heat treatment is simulated by finite element method. A close-loop control program is designed to simulate the temperature field of two different pipes. Both the skin effect of induction heating and electro-thermal coupled effect are considered in the heating model. The local heat treatment temperature difference at the inner and outer side of the pipe is analyzed and the different convection conditions are also considered. The simulation results show that in appropriate induction heating process, the temperature difference in the pipe can be controlled within 30 ℃.

Numerical Simulation on Thermal Stress of Large-scale Bearing Roller during Heating Process of Final Heat Treatment

hi this paper, the non-linear finite element method had been applied to calculate the thermal stress evolving process of the large-scale bearing roller during heating process of final heat treatment. It was found that two stress peaks appeared during heating process and the second stress peak was higher than the first. If the preheating time was elongated, the second stress peak was reduced distinctly. Therefore, the pre-heating time should be elongated suitably to ensure safety in the practical manufacture process.

Effects of Chemical Treatments on Thermal Expansion Properties of Cordierite Ceramics

Cordierite honeycomb ceramics was treated with 1.5 M HNO3 , followed with 1.5 M NaOH at 93 ℃. The combination of acid treatment with alkali treatment significantly diminished the rebounding of coefficient of thermal expansion （CTE） caused by heat treatment, a phenomenon observed in samples treated solely with acid. Inductively coupled plasma （ICP） analysis results reveal that the alkali treatment preferentially dissolved ＂free＂ SiO2 left in the acid-treated samples, which is considered to be a key factor responsible for the CTE rebounding.

Influence of Different Surface Treatments of H13 Hot Work Die Steel on Its Thermal Fatigue Behaviors

Thermal fatigue checking is the general failure of hot work die steels, which is relative with the structures and properties of the steels and the stress alternated during the employment. The Uddeholm test method on thermal fatigue is used to compare the behaviors of different samples, which are treated with plasma nitriding、plasma sulfur carbon nitriding、boronizing or not treated. The results show that the nitriding improves the thermal fatigue property of the tool steel, while the plasma sulfur carbon nitriding and the boronizing impair the property. The mechanisms are induced as follows. By increasing the hardness and changing the stress distribution in the surface layer, surface treatment can decrease the plastic deformation and the tensile stress during the cycling. Therefore, the generation and growth of the cracks are restrained. On the other hand, as results of surface treating, in the surface layer the toughness declines and the expanding coefficient ascendes; the latter change caused the strengthening of the tensile and compressive stress during the cycling. Thus the resistance to thermal fatigue is weakened. Whether or not the surface treatment is favor to thermal fatigue of tool steels relies on which factor is dominant.

Effects of Melt Thermal Treatment on A356 Alloy

To increase the casting quality of hypoeutectic Al-Si alloys, the effects of melt thermal treatment on the solidification structure of the A356 alloy were analyzed by a factorial experiment, in which the overheated melt was mixed with the low temperature melt. Experimental results show that the elongation ratio and strength of the treated samples increase remarkably compared with the control sample. The primary dendrite size reduces dramatically and the dendrite changes from columnar to equiaxed, with a little change of the secondary dendrite arm spacing (SDAS). Combined with the measurement of the nucleation undercooling, it is concluded that the solidification structure and refining effect are dependent primarily on the low temperature melt. The refining mechanism is believed as a result of the multiplication of the nuclei in the melt thermal treatment procedure.

An in Vitro Investigation of Acid Etching Treatment Prior to Post and Core Cementation and Teeth Fracture Resistance

In order to investigate how to enhance the teeth fracture resistance after the post and core treatment, an in vitro study was conducted to measure the fracture resistance of endodontically treated teeth restored with cast post and core with two kinds of surface treatment technology and acid etching preparation on the dentinal surface. Sixty-four recently extracted human single-rooted first premolars were endodontically treated and sectioned approximately 1.5 mm above the cementoenamel junction to remove the coronal portion. Each specimen received a cast post, core build-up and a metal alloy crown restoration. All teeth were randomly divided into the smooth surface post, core repair group, the sand blasting surface post, and core repair group, each group was divided into 10 s, 30 s, 60 s acid corrosion treatment group and control group. In acid test groups, an acid etching solution was applied for 10, 30 and 60 seconds, respectively, to the root canal wall surface. Each specimen was embedded in acrylic resin block and tested in an electronic universal testing machine. Fracture loads results showed that canal acid etching could increase teeth fracture resistance strength both in smooth groups and sandblasting group, and achieved the best effect when acid etching for 30 s. Sand spray treatment on the surface of the cast metal post can improve the flexural strength of the teeth after postcrown restoration. Acid etching on the root canal wall surfaces and sand spray treatment on the surface of the cast metal post can improve the flexural strength of the root after post-crown restoration. Therefore, these two methods could be used to strengthen the tooth fracture resistance, and maintain the long-term therapeutic effect of cast post and core restoration.

Effect of Thermal Treatment and Acid Leaching Process on Pore Characteristics of Nanometer Porous Glass

Porous glass was prepared by thermally treating sodium borosilicate glass for different time, the effect of thermal treatment on pore size distribution was discussed and the pore size of the prepared porous glass was measured by scanning electron microscopy （SEM） and differential thermal analysis （DTA）. The results show that the optimum porous glass with an average diameter of 80 nm can be prepared by thermal treatment at 600℃ for 12 h and then acid treatment for 12 h in 2 mol·L^-1 hydrochloric acid solution.

Impacts of freezing and thermal treatments on dimensional and mechanical properties of wood flour-HDPE composite

Wood plastic composite （WPC） of wood flour （WF）, high density polyethylene （HDPE）, maleic anhydride-grafted polyethylene （MAPE） and lubricant was prepared by extrusion, and then exposed to different temperatures to evaluate the effects of freezing and thermal treatment on its dimensional and mechanical properties. At elevated temperatures, WPC expanded rapidly initially, and then contracted slowly until reaching an equilibrium state. Treatment at 52°C and relative humidity of 50% for 16 days improved the mechanical properties of WPC： flexure, tensile strength, and izod unnotched impact strength increased by 8%, 10% and 15%, respectively. Wide-angle X-ray diffraction （XRD） tests showed that the degree of crystalization of HDPE in WPC declined with increasing treatment temperature.

Effect of post treatment temperature and humidity conditions onfixation performance of CCA-C treated red pine and southern pine

Rates of fixation in chromated copper arsenate (CCA-C) treated red pine (Pinus resinosa Ait.) and southern pine (Pinus spp) sapwood specimens using retention of 1.5, 2.0, 6.4 kg·m?3 are compared at temperature (T) ranging from 70°C to 50°C and 5 different relative humidity (RH) conditions. The samples were investigated using the expressate method to follow chromium fixation. Red pine fixes faster than southern pine under all 11 post treatment schedules. The fixation rates for both species are not significantly different while the blocks were fixed under 6 fixation/drying schedules that differed only in the order of T/RH conditions applied. The rate of fixation of all samples in any fixation stage were reduced when the blocks were fixed under lower humidity conditions in spite of no change in chamber temperature. Some of this influence can be attributed to the effect of humidity on heat transfer into the wood and cooling of the wood surface.

EFFECTS OF HEAT TREATMENT ON THE THERMAL EXPANSION BEHAVIOR OF SiC WHISKER REINFORCED ALUMINUM COMPOSITE

The thermal expansion behaviors of commercially-available SiC whisker reinforced pure aluminum composites subjected to different heat treatments were studied. The results indicated that the thermal expansion behaviors were greatly affected by heat treatment. To explain the results, the microstructures and thermal mismatch stresses in the matrix of the composite were examined by the transmission electron microscope and X-ray diffraction, respectively. The results show that the dislocation density and thermal mismatch stresses in the matrix of the composites water-quenched from 600°C are much higher than those of the composite slowly cooled from 600°C. The analysis suggests that the coefficients of thermal expansion (CTE) are closely related to the change of thermal mismatch stresses and the yield strength of the matrix of the composite. The comparison of the coefficients of thermal expansion between experiments and calculations suggests that the temperature behaviors of CTE of SiC/Al composite agree better with those of Kerner's model within lower temperature range.

Microstructural Characteristic of Montmorillonite and Its Thermal Treatment Products

The montmorillonite was studied by differen t methods, such as chemical analysis, DAT, TG, X RD, IR, AFM and MAS NMR. The experimental results show that the hydroxyl in octa hedra sheets begins dehydrating when the thermal treatment temperature reaches 659℃, but th e layer structure remains the same,and the corresponding Al(Ⅵ) is turned into Al(Ⅳ) in octahedra sheets. When the temperature reaches 900℃, the layer struct ure of montmorillontite is destroyed, and the new mineral phase μ-cordierite i s found. When the temperature reaches 1200℃, the μ-cordierite phase loses its stability, and decomposes into cristobalite phase and mullite phase.Meanwhile, the recrystallization phenomenon in thermal treatment products is obvious. There is a small quantity of Al Ⅵ signal in MAS NMR spectrum, corresponding to Al of mullite. When the temperature reaches 1350℃, the cristobalite and mullite phases reduce slightly, and more Fe-cordierite phase appears, corresponding to Fe-cordierite spectrum in XRD and MAS NMR.

Preparation and thermal treatment of Pd/Ag composite membrane on a porousα-alumina tube by sequential electroless plating technique for H_2 separation

Pd/Ag/α-Al2O3 composite membranes were prepared by sequential electroless plating technique. The prepared membranes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy, and inductively coupled plasma atomic emission spectroscopy techniques （ICP-AES）. Effects of annealing time, Ag content, and air treatment on the hydrogen permeation flux and morphology of the alloys were investigated. The results of the investigation showed that the prepared type of tube had a good potential as substrate for membrane preparation. In addition, a uniform defect-free alloy was prepared by annealing at 550 ℃ in H2 atmosphere. The permeation results showed an increase in H2 permeation flux by increasing the Ag content and the annealing time. In addition, the air treatment of the prepared membranes at 400 ℃ for 1 h changed the morphology of the alloy and substantially enhanced the hydrogen flux.