期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Texture and Se vacancy optimization induces high thermoelectric performance in Bi_(2)Se_(3) flexible thin films
1
作者 Dong-Wei Ao Wei-Di Liu +3 位作者 Yue-Xing Chen Fan Ma Yi-Jie Gu Zhuang-Hao Zheng 《Rare Metals》 SCIE EI CAS CSCD 2024年第6期2796-2804,共9页
Bi_(2)Se_(3)-based flexible thin film with high thermoelectric performance is promising for the waste heat recovery technology.In this work,a novel post-selenization method is employed to prepare n-type Bi_(2)Se_(3)fl... Bi_(2)Se_(3)-based flexible thin film with high thermoelectric performance is promising for the waste heat recovery technology.In this work,a novel post-selenization method is employed to prepare n-type Bi_(2)Se_(3)flexible thin films with highly textured structure.The strengthened texture and Se vacancy optimization can be simultaneously achieved by optimizing the selenization temperature.The highly oriented texture leads to the increased carrier mobility and results in a high electric conductivity of~290.47 S·cm^(-1)at 623 K.Correspondingly,a high Seebeck coefficient(>110μW·K-1)is obtained due to the reduced carrier concentration,induced by optimizing vacancy engineering.Consequently,a high power factor of 3.49μW·cm^(-1)·K^(-2)at 623 K has been achieved in asprepared highly-bendable Bi_(2)Se_(3)flexible thin films selenized at 783 K.This study introduces an effective post-selenization method to tune the texture structure and vacancies of Bi_(2)Se_(3)flexible thin films,and correspondingly achieves high thermoelectric performance. 展开更多
关键词 THERMOELECTRIC Bi_(2)Se_(3) Flexible thin film post-selenization
原文传递
构建准层状自空穴掺杂SnSe取向薄膜获得优异热电功率因子和输出功率密度 被引量:1
2
作者 薛宇利 王晴 +7 位作者 高志 钱鑫 王江龙 闫国英 陈明敬 赵立东 王淑芳 李志亮 《Science Bulletin》 SCIE EI CAS CSCD 2023年第22期2769-2778,M0005,共11页
热电技术可以实现热能与电能的相互转换,其开发利用对于缓解能源危机具有重要意义.近10年来,SnSe因其潜在的高能量转换效率、绿色环保和低成本特性而备受关注.但SnSe的固有载流子浓度低(约10~(17)cm^(-3)),导致其功率因子偏低,从而限制... 热电技术可以实现热能与电能的相互转换,其开发利用对于缓解能源危机具有重要意义.近10年来,SnSe因其潜在的高能量转换效率、绿色环保和低成本特性而备受关注.但SnSe的固有载流子浓度低(约10~(17)cm^(-3)),导致其功率因子偏低,从而限制了SnSe基器件的输出功率密度.因此,探索新的载流子浓度优化策略对于SnSe的应用至关重要.此外,与三维块体相比,二维薄膜更易和现代半导体工艺相兼容,在热电微纳米器件的构筑和应用方面具有独特优势.本文报道了一种利用非原位硒化技术,通过电荷转移和自空穴掺杂效应来优化a轴取向SnSe基薄膜的载流子浓度.当硒化时间为20 min时,薄膜载流子浓度可提高至10~(18)cm^(-3)数量级,形成了准层状的自空穴掺杂SnSe基薄膜,其功率因子在600 K时达到了5.9μW cm^(-1)K^(-2).由硒化处理的SnSe基取向薄膜构筑的热电发电机在50和90 K的温差下分别具有约83、838μW cm^(-2)的超高功率密度.非原位硒化技术可以有效提高SnSe基薄膜的载流子浓度,为其他热电材料性能优化提供了一种新策略. 展开更多
关键词 Thermoelectric property Thin film Tin selenide post-selenization Carrier concentration
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部