Synergetic Bioproduction of Short-Chain Fatty Acids from Waste Activated Sludge Intensified by the Combined Use of Potassium Ferrate and Biosurfactants

The synergetic effect and underlying mechanism of potassium ferrate(PF)with tea saponin(TS,a biosurfactant)in producing short chain fatty acids(SCFAs)from anaerobic fermentation of waste activated sludge(WAS)were explored in this work.Experimental results showed that 0.2 g PF(g TSS)^(-1)(total suspended solid)combined with 0.02 g TS(g TSS)^(-1) could further improve SCFAs’production,and the maximum SCFAs content reached 2008.7 mg COD L^(-1),which is 1.2 and 4.5 times higher than those with PF and TS individually added,respectively,and 5.3 times higher than that of blank WAS on Day 12.In the model substrates experiments,the degradation rates of bovine serum albumin and dextran with combination of PF and TS were 41.3%±0.1% and 48.5%±0.06%,respectively,on Day 3,which are lower than those in blank WAS(with degradation rates of 72.3%±0.5%and 90.3%±0.3%).It was revealed that the oxidative effect of PF and the solubilization of TS caused more organic matters to be dissolved out from WAS,providing a large number of biodegradable substances for subsequent SCFAs production.While WAS pretreated with the combination of PF and TS,the relative abundances of Firmicutes increased from 6.4%(blank)to 38.6%,and that of Proteobacteria decreased from 41.8%(blank)to 21.8%.The combination of PF and TS promoted the hydrolysis process of WAS by enriching Firmicutes,and then increased acetic acid production by inhibiting Proteobacteria that consumed SCFAs.Meanwhile,at the genus level,acidogenesis bacteria(e.g.,Proteiniclasticum and Petrimonas)were enriched whereas SCFAs consuming bacteria(e.g.,Dokdonella)were inhibited.

Effects of Potassium Ferrate and Low-Temperature Thermal Hydrolysis Co-Pretreatment on the Hydrolysis and Anaerobic Digestion Process of Waste Activated Sludge

This study evaluated the effect of potassium ferrate(PF)and low-temperature thermal hydrolysis co-pretreatment on the promotion of sludge hydrolysis process and the impact on acid production in the subsequent anaerobic digestion process.The analytical investigations showed that co-pretreatment significantly facilitated the hydrolysis process of the sludge and contributed to the accumulation of short-chain fatty acids(SCFAs).The pretreatment conditions under the optimal leaching of organic matter from sludge were hydrothermal temperature of 75℃,hydrothermal treatment time of 12 h,and PF dosage of 0.25 g g^(−1)TSS(total suspended solids),according to the results of orthogonal experiments.By pretreatment under proper conditions,the removal rate of soluble chemical oxygen demand(SCOD)achieved 71.8%at the end of fermentation and the removal rate of total phosphorus(TP)was 69.1%.The maximum yield of SCFAs was 750.3 mg L^(−1),7.45 times greater than that of the blank group.Based on the analysis of the anaerobic digestion mechanism,it was indicated that the co-pretreatment could destroy the floc structure on the sludge surface and improve organic matter dissolving,resulting in more soluble organic substances for the acidification process.Furthermore,microbial community research revealed that the main cause of enhanced SCFAs generation was an increase in acidogenic bacteria and a reduction of methanogenic bacteria.

Treatment of Phenol-Contaminated Soil by Potassium Ferrate Based on pH Control

This study aims to optimize the treatment of phenol-contaminated soil by potassium ferrate. Variations in pH value can accurately reflect the state and reaction status of the entire treatment process. Therefore, the pH value could be an important variable for optimizing the reaction conditions and achieving the automatic control of the process. About 99.89% of phenol was removed after 10 min of the pH-contxolled reaction at a rotational speed of 40-70 r/min, with the initial phenol concentration equating to 10.0 g/kg and the total water consumption reaching 2.72 L （at a soil/water ratio of 1：0.68）. The test results could provide a basis for practical application of automatic reaction control by pH value.

Oxidative Desulfurization of Model Sulfur Compound by Potassium Ferrate in the Presence of Phosphomolybdic Acid Catalyst

In this work, the removal of thiophene from simulated oil has been studied by using the adsorption, extraction and oxidation/adsorption methods, respectively. In the adsorptive desulfurization process, different commercial adsorbents were used to eliminate thiophene at ambient pressure and mild temperature, and the results showed that carbon powder had the best adsorption ability. In the extractive desulfurization process, the best desulfurization result was obtained when DMF is used. In the oxidative/adsorptive desulfurization procedure using synthesized potassium ferrate as the oxidant and phosphomolybdic acid solution as the catalyst, thiophene was oxidized and removed from hydrocarbons in combination with active carbon adsorption, and the residual sulfur content of simulated oil could be reduced to 15.3mg/L from the original level of 200mg/L, with the desulfurization rate reaching 92.3%.

Preparation of Potassium Ferrate (VI) via β-Fe_2O_3

β-Fe2O3·H2O is prepared by reacting FeCl3, K2CO3, an oxidizing agent HIO4 and a metal chelating agent K3PO4 at 65~ 70℃. The prepared β-Fe2O3' H2O is introduced into the mixture of KOH, KOCl and a ferrate stabilizer KI, and reacted at room temperature for 5 h to produce a ferrate-containing cake. The cake is dried to give a water-free dried potassium ferrate (VI).

Effects of operating conditions on iron(hydr)oxides evolution and ciprofloxacin degradation in potassium ferrate-ozone stepwise oxidation system

In this study,a stepwise oxidation system of potassium ferrate(K_(2)FeO_(4))combined with ozone(O+3)was used to degrade ciprofloxacin(CIP).The effects of pH and pre-oxidation time of K_(2)FeO_(4) on the evolution of K_(2)FeO_(4) reduction products(iron(hydr)oxides)and CIP degradation were investigated.It was found that in addition to its own oxidation capacity,K_(2)FeO_(4) can also influence the treatment effect of CIP by changing the catalyst content.The presence of iron(hydr)oxides effectively enhanced the mineralization rate of CIP by catalyzing ozonation.The pH value can influence the content and types of the components with catalytic ozonation effect in iron(hydr)oxides.The K_(2)FeO_(4) pre-oxidation stage can produce more iron(hydr)oxides with catalytic components for subsequent ozonation,but the evolution of iron(hydr)oxides components was influenced by O_(3) treatment.It can also avoid the waste of oxidation capacity owing to the oxidation of iron(hydr)oxides by O_(3) and free radicals.The intermediate degradation products were identified by Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR-MS).Besides,the degradation pathways were proposed.Among the degradation products of CIP,the product with broken quinolone ring structure only appeared in the stepwise oxidation system.

Potassium ferrate pretreatment promotes short chain fatty acids yield and antibiotics reduction in acidogenic fermentation of sewage sludge

During the acidogenic fermentation converting waste activated sludge (WAS) into shortchain fatty acids (SCFA), hydrolysis of complex organic polymers is a limiting step and the transformation of harmful substances (such as antibiotics) during acidogenic fermentation is unknown. In this study, potassium ferrate (KFeO) oxidation was used as a pretreatment strategy for WAS acidogenic fermentation to increase the hydrolysis of sludge and destruct the harmful antibiotics. Pretreatment with KFeOcan effectively increase the SCFA production during acidogenic fermentation and change the distribution of SCFA components.With the dosage of 0.2 g/g TS, the maximum SCFA yield was 4823 mg COD/L, which is 28.3times that of the control group;acetic acid accounts for more than 90% of the total SCFA. The higher dosage (0.5 g/g TS) can further increase the proportion of acetic acid, but inhibit the overall performance of SCFA production. Apart from the promotion of hydrolysis and acidogenesis, KFeOpretreatment can also simultaneously oxidizes and degrades part of the antibiotics in the sludge. When the dosage is 0.5 g/g TS, the degradation efficacy of antibiotics is the most significant, and the contents of ofloxacin, azithromycin, and tetracycline in the sludge are reduced by 69%, 42%, and 50%, respectively. In addition, KFeOpretreatment can also promote the release of antibiotics from sludge flocs, which is conducive to the simultaneous degradation of antibiotics in the subsequent biological treatment process.

Efficient iodination of aromatic compounds using potassium ferrate supported on montmorillonite

Potassium ferrate impregnated on montmorillonite is a mild,cheap,and non-toxic reagent for the iodination of phenols, including naphthol,aromatic amines,and heterocyclic substrates in fair to excellent yields by a simple isolation procedure.

Flotation behaviors of chalcopyrite and galena using ferrate(Ⅵ) as a depressant

This paper investigated the effects of potassium ferrate(PF)on the flotation performances of chalcopyrite and galena.The flotation results showed that PF obviously depressed galena,but had little effects on the floatability of chalcopyrite within pH range of 4.0–12.0.Zeta potential tests showed that the addition of PF induced the formation of more amounts of hydrophilic species on the surface of galena under an alkaline environment.Industrial grade O-isopropyl-N-ethyl thionocarbamate(IPETC)chemically adsorbed on the surface of the PF-treated chalcopyrite and galena after its addition.Contact angle measurements showed that with the addition of PF,the contact angle of the galena surface significantly decreased compared with the chalcopyrite surface.Localized electrochemical impedance spectroscopy(LEIS)tests showed that the addition of PF increased the impedance of the galena surface.X-ray photoelectron spectroscopy(XPS)analyses revealed that the formation of hydrophilic species,namely lead sulfite,lead hydroxide and ferric hydroxide,on the galena surface,decreased its floatability in the presence of PF,while the formation of hydrophobic species,namely copper disulfide and elemental sulfur,on the chalcopyrite surface,maintained its floatability.Finally,a descriptive model for the reaction of PF with chalcopyrite and galena was proposed.

Comparative study on the removal technologies of 2-methylisoborneol(MIB) in drinking water

Removal of 2-methylisoborneol （MIB） in drinking water by ozone, powdered activated carbon （PAC）, potassium permanganate and potassium ferrate was investigated. The adsorption kinetics of MIB by both wood-based and coat-based PACs show that main removal of MIB occurs within contact time of 1 h. Compared with the wood-based PAC, the coat-based PAC evidently improved the removal efficiency of MIB. The removal percentage of trace MIB at any given time for a particular carbon dosage was irrelative to the initial concentration of MIB. A series of experiments were performed to determine the effect of pH on the ozonation of MIB. The results show that pH has a significant effect on the ozonation of MIB. It is conclusive that potassium permanganate and potassium ferrate are ineffective in removing the MIB in drinking water.

Preparation of Solid Waste-Based Activated Carbon and Its Adsorption Mechanism for Toluene

Regenerated activated carbon(RAC)samples were prepared by carbon activation using waste activated carbon from solid waste resources as the carbon source precursor coupled with adding alkaline additives,and then were further modified by potassium ferrate to finally prepare high-performance carbon for VOCs adsorption.At the same time,the samples before and after modification were systematically studied through characterization techniques such as SEM,Raman spectrometry,FT-IR,XPS,and dynamic/static adsorption.The results showed that the specific surface area and pore volume of the RAC after modification by the strong oxidant potassium ferrate increased by 1.4 times;the degree of defects was enhanced and the content of oxygen-containing functional groups on the surface increased significantly.Among them,the sample modified with potassium ferrate for 24 h had the best dynamic toluene adsorption performance(375.5 mg/g),and the dynamic adsorption capacity was twice that of the original sample(192.8 mg/g).The static adsorption test found that the maximum adsorption capacity of RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h was 796 mg/g,which indicated that the potassium ferrate modification treatment could significantly increase the VOCs adsorption performance of RAC.In addition,through consecutive toluene adsorption-desorption cycle tests,it was found that the RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h sample still retained 91%of adsorption activity after the fifth regeneration cycle.This indicates that RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h has good cycle stability and great application value for the efficient purification of industrial waste VOCs gas.

Promotion effect of KOH on preparation of dissolved Fe(Ⅵ)

In order to improve the yield and stability of ferrate in solution, dissolved Fe(Ⅵ) prepared with NaOH and KOH respectively was compared in this study. The results showed that KOH is more suitable than NaOH for the preparation of dissolved Fe(Ⅵ) at temperature over 50 ℃. It is found that the dissolved Fe(Ⅵ) prepared with KOH increases quickly at first, and then slowly with the increasing concentrations of OH-and ClO-, while it increases rapidly at first and then decreases rapidly with the increasing dosage of Fe(NO3)3·9H2O. These results are different from that prepared with NaOH. It can be explained that solid K2FeO4 salts can be formed in KOH solution, and it will lower the Fe(Ⅵ) concentration, counteract the decomposition of Fe(Ⅵ), and improve the yield of Fe(Ⅵ). The maximum ferrate concentration is 0.163 mol/L obtained by 100 g/L Fe(NO3)3·9H2O and 6.16 mol/L KOH at 65 ℃. The stability of Fe(VI) is greatly improved due to the hypochlorite existed in the dissolved ferrate, and only 24% Fe(Ⅵ) has been decomposed after 16 d for 1 mmol/L Fe(Ⅵ) at 25 ℃.