Multi-deployment of dispersed power sources became an important need with the rapid increase of the Distributed generation (DG) technology and smart grid applications. This paper proposes a computational tool to asses...Multi-deployment of dispersed power sources became an important need with the rapid increase of the Distributed generation (DG) technology and smart grid applications. This paper proposes a computational tool to assess the optimal DG size and deployment for more than one unit, taking the minimum losses and voltage profile as objective functions. A technique called radial basis function (RBF) neural network has been utilized for such target. The method is only depending on the training process;so it is simple in terms of algorithm and structure and it has fast computational speed and high accuracy;therefore it is flexible and reliable to be tested in different target scenarios. The proposed method is designed to find the best solution of multi- DG sizing and deployment in 33-bus IEEE distribution system and create the suitable topology of the system in the presence of DG. Some important results for DG deployment and discussion are involved to show the effectiveness of our proposed method.展开更多
With the explosive development of wireless communication and low power embedded techniques, Body Area Network (BAN) has opened up new frontiers in the race to provide real-time health monitoring. IEEE 802 has establis...With the explosive development of wireless communication and low power embedded techniques, Body Area Network (BAN) has opened up new frontiers in the race to provide real-time health monitoring. IEEE 802 has established a Task Group called IEEE 802.15.6 inNovember 2007 and aims to establish a communication standard optimized for low power, high reliability applied to medical and non-medical application for BANs. This paper overviews the path loss model and the communication scheme for implant-to-body surface channel presented by IEEE 802.15.6 standard. Comparing with the standard scheme where BCH (Bose-Chaudhuri-Hochquenghem) code is employing, we propose a new coding solution using convolutional code operating with Bit Interleaver based on the properties of implant-to-body surface channel. To analyze the performance of the two Error Correct Coding (ECC) schemes, we performed simulations in terms of Bit Error Rate (BER) and power consumption on MATLAB and FPGA platform, respectively. The simulation results proved that with appropriate constraint length, convolutional code has a better performance not only in BER, but also in minimization of resources and power consumption.展开更多
The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV volta...The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV voltage. The phenomenon describes as inequality of vector magnitude of phase voltage and shearing angle between them. Causes and consequences of the voltage unbalance in distribution networks have been considered. The algorithm, which allows switching one-phase load, has been developed as one of the methods of reducing the unbalance level. The algorithm is written in the function block diagram programming language. For determining the duration and magnitude of the unbalance level it is proposed to introduce the forecasting algorithm. The necessary data for forecasting are accumulated in the course of the algorithm based on the Function Block Diagram. The algorithm example is given for transforming substation of the urban electrical power supply system. The results of the economic efficiency assessment of the algorithm implementation are shown in conclusion. The use of automatic switching of the one-phase load for explored substation allows reducing energy losses (active electric energy by 7.63%;reactive energy by 8.37%). It also allows improving supply quality to a consumer. For explored substation the average zero-sequence unbalance factor has dropped from 3.59% to 2.13%, and the negative-sequence unbalance factor has dropped from 0.61% to 0.36%.展开更多
为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制...为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制系统(load power flexible control system,LPFCS)的拓扑结构及控制方式;其次,依据负荷功率和电池荷电状态来划分负荷工况,进而以负荷功率波动的平抑、防止电池过充过放以及提升储能系统应对极端工况的能力为原则,将LPFCS的工作模式分为空闲、填谷、削峰以及限幅4种模式;然后,建立系统网侧线损优化模型,求解模型得出功率补偿值的取值区间,并基于该区间确定不同工况下LPFCS的功率补偿值。最后,基于长江某岸电系统实测负荷数据,对LPFCS的工作性能进行仿真和实验验证。结果表明:LPFCS的补偿响应时间小于0.3 s,负荷功率波动抑制率达到90%,系统网侧线损率下降17.2%。展开更多
针对传统固定权重多目标无功优化在应对新型电力系统复杂多变的工况时无法针对实时工况做出最合适的控制决策的问题,提出一种自适应多目标无功优化控制策略。该策略以系统有功网损和并网点电压偏离量的加权最小作为目标函数,目标函数的...针对传统固定权重多目标无功优化在应对新型电力系统复杂多变的工况时无法针对实时工况做出最合适的控制决策的问题,提出一种自适应多目标无功优化控制策略。该策略以系统有功网损和并网点电压偏离量的加权最小作为目标函数,目标函数的权重系数根据并网点电压的偏离情况自适应调节。首先,分析海上风电场并网点电压波动与有功、无功输出的关系,建立相应的无功分配模型,并针对风电机组及静止无功发生器(static var ge nerator,SVG)的输入输出特性,建立相应的无功控制模型。此外,考虑海上运行的功率约束、安全运行约束等,采用变惯性权重粒子群优化算法对无功控制策略进行求解。最后,在MATLAB中搭建海上风电场模型进行仿真验证,仿真算例表明:相较于传统固定权重多目标无功优化,自适应多目标无功优化控制策略可以根据电网实时工况,迅速调整各优化目标的优先级,较好地实现有功网损和并网点电压的协调优化。展开更多
文摘Multi-deployment of dispersed power sources became an important need with the rapid increase of the Distributed generation (DG) technology and smart grid applications. This paper proposes a computational tool to assess the optimal DG size and deployment for more than one unit, taking the minimum losses and voltage profile as objective functions. A technique called radial basis function (RBF) neural network has been utilized for such target. The method is only depending on the training process;so it is simple in terms of algorithm and structure and it has fast computational speed and high accuracy;therefore it is flexible and reliable to be tested in different target scenarios. The proposed method is designed to find the best solution of multi- DG sizing and deployment in 33-bus IEEE distribution system and create the suitable topology of the system in the presence of DG. Some important results for DG deployment and discussion are involved to show the effectiveness of our proposed method.
文摘With the explosive development of wireless communication and low power embedded techniques, Body Area Network (BAN) has opened up new frontiers in the race to provide real-time health monitoring. IEEE 802 has established a Task Group called IEEE 802.15.6 inNovember 2007 and aims to establish a communication standard optimized for low power, high reliability applied to medical and non-medical application for BANs. This paper overviews the path loss model and the communication scheme for implant-to-body surface channel presented by IEEE 802.15.6 standard. Comparing with the standard scheme where BCH (Bose-Chaudhuri-Hochquenghem) code is employing, we propose a new coding solution using convolutional code operating with Bit Interleaver based on the properties of implant-to-body surface channel. To analyze the performance of the two Error Correct Coding (ECC) schemes, we performed simulations in terms of Bit Error Rate (BER) and power consumption on MATLAB and FPGA platform, respectively. The simulation results proved that with appropriate constraint length, convolutional code has a better performance not only in BER, but also in minimization of resources and power consumption.
文摘The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV voltage. The phenomenon describes as inequality of vector magnitude of phase voltage and shearing angle between them. Causes and consequences of the voltage unbalance in distribution networks have been considered. The algorithm, which allows switching one-phase load, has been developed as one of the methods of reducing the unbalance level. The algorithm is written in the function block diagram programming language. For determining the duration and magnitude of the unbalance level it is proposed to introduce the forecasting algorithm. The necessary data for forecasting are accumulated in the course of the algorithm based on the Function Block Diagram. The algorithm example is given for transforming substation of the urban electrical power supply system. The results of the economic efficiency assessment of the algorithm implementation are shown in conclusion. The use of automatic switching of the one-phase load for explored substation allows reducing energy losses (active electric energy by 7.63%;reactive energy by 8.37%). It also allows improving supply quality to a consumer. For explored substation the average zero-sequence unbalance factor has dropped from 3.59% to 2.13%, and the negative-sequence unbalance factor has dropped from 0.61% to 0.36%.
文摘为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制系统(load power flexible control system,LPFCS)的拓扑结构及控制方式;其次,依据负荷功率和电池荷电状态来划分负荷工况,进而以负荷功率波动的平抑、防止电池过充过放以及提升储能系统应对极端工况的能力为原则,将LPFCS的工作模式分为空闲、填谷、削峰以及限幅4种模式;然后,建立系统网侧线损优化模型,求解模型得出功率补偿值的取值区间,并基于该区间确定不同工况下LPFCS的功率补偿值。最后,基于长江某岸电系统实测负荷数据,对LPFCS的工作性能进行仿真和实验验证。结果表明:LPFCS的补偿响应时间小于0.3 s,负荷功率波动抑制率达到90%,系统网侧线损率下降17.2%。
文摘针对传统固定权重多目标无功优化在应对新型电力系统复杂多变的工况时无法针对实时工况做出最合适的控制决策的问题,提出一种自适应多目标无功优化控制策略。该策略以系统有功网损和并网点电压偏离量的加权最小作为目标函数,目标函数的权重系数根据并网点电压的偏离情况自适应调节。首先,分析海上风电场并网点电压波动与有功、无功输出的关系,建立相应的无功分配模型,并针对风电机组及静止无功发生器(static var ge nerator,SVG)的输入输出特性,建立相应的无功控制模型。此外,考虑海上运行的功率约束、安全运行约束等,采用变惯性权重粒子群优化算法对无功控制策略进行求解。最后,在MATLAB中搭建海上风电场模型进行仿真验证,仿真算例表明:相较于传统固定权重多目标无功优化,自适应多目标无功优化控制策略可以根据电网实时工况,迅速调整各优化目标的优先级,较好地实现有功网损和并网点电压的协调优化。
