In large inter connected power systems, inter-area oscillations are turned to be a severe problem. Hence inter-area oscillations cause severe problems like damage to generators, reduce the power transfer capability of...In large inter connected power systems, inter-area oscillations are turned to be a severe problem. Hence inter-area oscillations cause severe problems like damage to generators, reduce the power transfer capability of transmission lines, increase wear and tear on network components, increase line losses etc. This paper is to maintain the stability of system by damping inter-area oscillations. Implementation of new equipment consists of high power electronics based technologies such as FACTs and proper controller design has become an essential to provide better damping performance than Power System Stabilizer (PSS). With development of Wide Area Measurement System (WAMS), remote signals have become as feedback signals to design Wide Area Damping Controller (WADC) for FACTs devices. In this work, POD is applied to both SVC and SSSC. Simulation studies are carried out in Power System Analysis Toolbox (PSAT) environment to evaluate the effectiveness of the FACTs controller in a large area power system. Results show that extensive analysis of FACTs controller for improving stability of system.展开更多
The novel quantitative assessment method using transmission line measurement was developed. A new style of stability criterion was suggested which is based on the line measurement. The stability indices for lines, cut...The novel quantitative assessment method using transmission line measurement was developed. A new style of stability criterion was suggested which is based on the line measurement. The stability indices for lines, cutsets and power system according to features of transient energy in the lines were given, which not only provide a reliable and accurate assessment of the transient stability of power system, but also can be used to assess the effect of lines and cutsets on the transient stability and identify the weak transmission segment. Examples were presented by simulation on the IEEE-39 buses test system.展开更多
This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(...This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.展开更多
A wide-area damping controller(WADC)is effective in damping inter-area low-frequency oscillation(LFO),if the time delay in a wide-area control loop can be properly handled.In order to simplify the WADC design and enla...A wide-area damping controller(WADC)is effective in damping inter-area low-frequency oscillation(LFO),if the time delay in a wide-area control loop can be properly handled.In order to simplify the WADC design and enlarge the delay adaptation range,the classic power system stabilizer(PSS)is adopted,and a new unified residue(UR)method is proposed for compact WADC design.The strategy of control loop selection is also improved by modifying the relative residue index based on a few dominant oscillation modes.The designed PSSbased compact WADC is as simple as classic PSS with no more than two lead-lag phase compensation units.Case studies are carried out on an IEEE 16-machine 68-bus power system.Simulation results demonstrate that the control loop selection before the WADC design is necessary and that the proposed selection strategy can easily pick out the suitable candidate control loops.In addition,it is feasible for the UR method to design WADCs with different time delays in the selected control loops.All the designed WADCs are effective in damping inter-area LFO and robust to time delay variations under operation conditions.Comparisons among five design methods for PSS-based WADC show that the proposed UR method is superior in delay adaptation,the conciseness of WADC structure and computation speed of parameters.展开更多
集中送出的新能源场站大多位于电网末端,随着其有功出力的增加,易出现静态电压失稳。该文将传统的阻抗模指标的应用对象由负荷推广至新能源场站,丰富了该指标在静态电压稳定评估方面的适用性场景,包括含无功补偿的新能源系统、新能源集...集中送出的新能源场站大多位于电网末端,随着其有功出力的增加,易出现静态电压失稳。该文将传统的阻抗模指标的应用对象由负荷推广至新能源场站,丰富了该指标在静态电压稳定评估方面的适用性场景,包括含无功补偿的新能源系统、新能源集群馈入系统、以及新能源多机多馈入系统。具体地,首先,分析新能源单馈入系统的临界静态电压稳定条件,并据此给出用于评估新能源场站静态电压稳定性的阻抗模裕度指标及稳定判据;其次,通过将无功补偿设备并入系统阻抗,分析无功补偿对于指标的影响;再次,证明在新能源的集群馈入系统中,公共耦合点(point of common coupling,PCC)的电压失稳将发生在单个新能源场站之前,并据此确定PCC点作为指标的计算节点;之后,为考虑多机多馈入系统中不同新能源场站间的影响,在指标的计算过程中,保留待评估的关键新能源场站,将其他新能源场站等值为阻抗,并入节点阻抗矩阵中,实现方法在多机多馈入系统中的扩展应用。最后,基于PSD-BPA中建立的单机单馈入系统、多机多馈入系统、以及某省实际大电网算例验证指标的有效性。展开更多
文摘In large inter connected power systems, inter-area oscillations are turned to be a severe problem. Hence inter-area oscillations cause severe problems like damage to generators, reduce the power transfer capability of transmission lines, increase wear and tear on network components, increase line losses etc. This paper is to maintain the stability of system by damping inter-area oscillations. Implementation of new equipment consists of high power electronics based technologies such as FACTs and proper controller design has become an essential to provide better damping performance than Power System Stabilizer (PSS). With development of Wide Area Measurement System (WAMS), remote signals have become as feedback signals to design Wide Area Damping Controller (WADC) for FACTs devices. In this work, POD is applied to both SVC and SSSC. Simulation studies are carried out in Power System Analysis Toolbox (PSAT) environment to evaluate the effectiveness of the FACTs controller in a large area power system. Results show that extensive analysis of FACTs controller for improving stability of system.
基金National Natural Science Foundation ofChina( No.5 99770 0 1)
文摘The novel quantitative assessment method using transmission line measurement was developed. A new style of stability criterion was suggested which is based on the line measurement. The stability indices for lines, cutsets and power system according to features of transient energy in the lines were given, which not only provide a reliable and accurate assessment of the transient stability of power system, but also can be used to assess the effect of lines and cutsets on the transient stability and identify the weak transmission segment. Examples were presented by simulation on the IEEE-39 buses test system.
文摘This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.
基金supported by the National Natural Science Foundation of China(No.51407160,No.51777193)the Key Research and Development Program of Zhejiang Province(No.2019C01149)。
文摘A wide-area damping controller(WADC)is effective in damping inter-area low-frequency oscillation(LFO),if the time delay in a wide-area control loop can be properly handled.In order to simplify the WADC design and enlarge the delay adaptation range,the classic power system stabilizer(PSS)is adopted,and a new unified residue(UR)method is proposed for compact WADC design.The strategy of control loop selection is also improved by modifying the relative residue index based on a few dominant oscillation modes.The designed PSSbased compact WADC is as simple as classic PSS with no more than two lead-lag phase compensation units.Case studies are carried out on an IEEE 16-machine 68-bus power system.Simulation results demonstrate that the control loop selection before the WADC design is necessary and that the proposed selection strategy can easily pick out the suitable candidate control loops.In addition,it is feasible for the UR method to design WADCs with different time delays in the selected control loops.All the designed WADCs are effective in damping inter-area LFO and robust to time delay variations under operation conditions.Comparisons among five design methods for PSS-based WADC show that the proposed UR method is superior in delay adaptation,the conciseness of WADC structure and computation speed of parameters.
文摘集中送出的新能源场站大多位于电网末端,随着其有功出力的增加,易出现静态电压失稳。该文将传统的阻抗模指标的应用对象由负荷推广至新能源场站,丰富了该指标在静态电压稳定评估方面的适用性场景,包括含无功补偿的新能源系统、新能源集群馈入系统、以及新能源多机多馈入系统。具体地,首先,分析新能源单馈入系统的临界静态电压稳定条件,并据此给出用于评估新能源场站静态电压稳定性的阻抗模裕度指标及稳定判据;其次,通过将无功补偿设备并入系统阻抗,分析无功补偿对于指标的影响;再次,证明在新能源的集群馈入系统中,公共耦合点(point of common coupling,PCC)的电压失稳将发生在单个新能源场站之前,并据此确定PCC点作为指标的计算节点;之后,为考虑多机多馈入系统中不同新能源场站间的影响,在指标的计算过程中,保留待评估的关键新能源场站,将其他新能源场站等值为阻抗,并入节点阻抗矩阵中,实现方法在多机多馈入系统中的扩展应用。最后,基于PSD-BPA中建立的单机单馈入系统、多机多馈入系统、以及某省实际大电网算例验证指标的有效性。