A review on thermal power plant automation development in China over 50 years is presented. The level of thermal power automation is introduced, especially for 200 MW and above units which are clarified into three cat...A review on thermal power plant automation development in China over 50 years is presented. The level of thermal power automation is introduced, especially for 200 MW and above units which are clarified into three categories by grade. The conditions, existing problems, relevant solutions and policies are summarized chronologically in aspects of centralized control, automatic regulation and controllability of main and auxiliary units, turbine control system, furnace security protection, and computer application in thermal power plants. This paper also points out the development tendency of thermal power plant automation and concepts of some vocabularies.展开更多
This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power m...This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power management system meets International Convention STCW （Standards of Training, Certification and Watchkeeping） 78 （with Manila amendments 2010） requirements in part of adequate reproduction of its operational modes corresponding to the actual configuration and layout of the ship＇s automated power management system with real consumers and typical loads. The simulator is fully consistent with the goals and objectives of the practical training, as well as the goals and objectives of proficiency testing engine department officers on issues of technical maintenance of real ship＇s equipment （high voltage installations included） and means of automation. The simulator＇s complex is designed for training and proficiency testing of cadets and students of maritime educational institutions, as well as training and proficiency testing of marine specialists （mechanics and electricians） by watch-keeping and maintenance of modem integrated automated control systems of ship＇s electric power plant and the individual ship electromechanical systems, including high-voltage systems. A simulator＇s complex provides adequate reproduction of operational situations on technical side of real ship electric and automation equipment provides training on monitoring, control and management diesel-generator sets in hand, semi-automatic and automatic modes of power station, control and management of electromechanical systems, as well as the set of tasks upon parameterization, visualization and etc. Besides number of combinations of monitoring, control and management tasks, the simulator＇s complex provides an opportunity to simulate various practical fault conditions. It allows students to focus on the work of automatic control system in emergency situations and to work out correct actions for a watch-keeper on searching, localizing of faults and troubleshooting of equipment.展开更多
A project named ＂A New Generation of Energy Management with Three Dimensional Coordination＂ has recently passed technical appraisal from the Ministry of Education. The project has been developed over the past 15 yea...A project named ＂A New Generation of Energy Management with Three Dimensional Coordination＂ has recently passed technical appraisal from the Ministry of Education. The project has been developed over the past 15 years by a research team led by Professor Zhang Boming from Tsinghua＇s Department of Electrical Engineering.展开更多
文摘A review on thermal power plant automation development in China over 50 years is presented. The level of thermal power automation is introduced, especially for 200 MW and above units which are clarified into three categories by grade. The conditions, existing problems, relevant solutions and policies are summarized chronologically in aspects of centralized control, automatic regulation and controllability of main and auxiliary units, turbine control system, furnace security protection, and computer application in thermal power plants. This paper also points out the development tendency of thermal power plant automation and concepts of some vocabularies.
文摘This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power management system meets International Convention STCW （Standards of Training, Certification and Watchkeeping） 78 （with Manila amendments 2010） requirements in part of adequate reproduction of its operational modes corresponding to the actual configuration and layout of the ship＇s automated power management system with real consumers and typical loads. The simulator is fully consistent with the goals and objectives of the practical training, as well as the goals and objectives of proficiency testing engine department officers on issues of technical maintenance of real ship＇s equipment （high voltage installations included） and means of automation. The simulator＇s complex is designed for training and proficiency testing of cadets and students of maritime educational institutions, as well as training and proficiency testing of marine specialists （mechanics and electricians） by watch-keeping and maintenance of modem integrated automated control systems of ship＇s electric power plant and the individual ship electromechanical systems, including high-voltage systems. A simulator＇s complex provides adequate reproduction of operational situations on technical side of real ship electric and automation equipment provides training on monitoring, control and management diesel-generator sets in hand, semi-automatic and automatic modes of power station, control and management of electromechanical systems, as well as the set of tasks upon parameterization, visualization and etc. Besides number of combinations of monitoring, control and management tasks, the simulator＇s complex provides an opportunity to simulate various practical fault conditions. It allows students to focus on the work of automatic control system in emergency situations and to work out correct actions for a watch-keeper on searching, localizing of faults and troubleshooting of equipment.
文摘A project named ＂A New Generation of Energy Management with Three Dimensional Coordination＂ has recently passed technical appraisal from the Ministry of Education. The project has been developed over the past 15 years by a research team led by Professor Zhang Boming from Tsinghua＇s Department of Electrical Engineering.
