Abstract Objective Higher levels of exposure to extremely low-frequency magnetic fields （ELF-MF） are associated with a slightly increased risk of childhood leukaemia. Compared with more-developed Western countries, ...Abstract Objective Higher levels of exposure to extremely low-frequency magnetic fields （ELF-MF） are associated with a slightly increased risk of childhood leukaemia. Compared with more-developed Western countries, higher exposure levels are evident in the Czech Republic, probably because of the different types of housing. In light of this, we aimed to examine the association between ELF-MF exposure and childhood leukaemia in the Czech Republic. Methods We conducted a paired case-control study. The cases （children with leukaemia） were age- sex- and permanent residence-matched to controls （children without leukaemia）. Although this limited potential bias and confounding, it also limited our number of participants. Results The matched analyses included 79 case-control pairs. No significant association between ELF-MF exposure and childhood leukaemia was observed for exposures over 0.2 μT （odds ratio [0R]=0.93, confidence interval [Cl]=0.45-1.93）, 0.3 μT （0R=0.77, Cl=0.34-1.75）, or 0.4 μT （OR=0.9, Cl=0.37-2.22）. Conclusion Despite higher levels of exposure in Middle and Eastern Europe, no indication of an association between ELF-MF exposure and childhood leukaemia was determined. This in contrast to the findings of previous studies conducted in different countries.展开更多
Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-the...Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-thermal coupling method is proposed.The magnetic-thermal coupling mechanism is analyzed.The thermal network model and finite element model are built by this method,respectively.The effects of power frequency on iron losses and temperature fields are analyzed by the magnetic-thermal coupling finite element model under the condition of rated load,and the relationship between the load and temperature field is researched under the condition of the synchronous speed.In addition,the equivalent thermal network model is used to verify the magnetic-thermal coupling method.Then the temperatures of various nodes are obtained.The results show that there are advantages in both computational efficiency and accuracy for the proposed coupling method,which can be applied to other permanent magnet motors with complex structures.展开更多
随着智能电网建设速度加快,为保证电力系统安全稳定运行,对电力系统参量信息进行提取分析的要求越来越高。当前,配电系统中大量配电架空线路电流难以实现非接触式的有效检测。针对此问题,提出了一种基于磁场反演的非接触式三相配电架空...随着智能电网建设速度加快,为保证电力系统安全稳定运行,对电力系统参量信息进行提取分析的要求越来越高。当前,配电系统中大量配电架空线路电流难以实现非接触式的有效检测。针对此问题,提出了一种基于磁场反演的非接触式三相配电架空线路电流检测方法。首先根据磁场逆问题建立线路电流反演寻优模型,继而引入参考点机制的非支配排序遗传算法(non-dominated sorting genetic algorithm,NSGA-Ⅲ)对该模型进行求解,然后结合优劣解距离法(technique for order preference by similarity to ideal solution,TOPSIS)筛选出符合决策者要求的最优解,以此绘制拟合曲线并提取特征参数。最后通过算例分析与试验验证了所提方法的有效性和准确性。展开更多
The dual-frequency electromagnetic ingot casting(DFEMIC)method with copper water-cooled ingot mold for extra heavy plate was developed.Electromagnetic field distribution in ingot mold was measured through the teslamet...The dual-frequency electromagnetic ingot casting(DFEMIC)method with copper water-cooled ingot mold for extra heavy plate was developed.Electromagnetic field distribution in ingot mold was measured through the teslameter,the shielding effect of the copper ingot mold was judged,it is less than 37.7%of magnetic flux density when there is no ingot mold.The average shielding the magnetic field proportion of copper ingot mold reduced to 54.9%after loading '「' type the magnetic yoke and adjusting its distribution.Improving electromagnetic power can increase the magnetic field strength. Using the slit combination ingot mold could help increasing magnetic flux density in ingot mold.Steel structure outside ingot mold also have interference on magnetic field distribution in ingot mold,Therefore,it is important to paid more attention to electromagnetic shielding and the uniform symmetry of system structure.展开更多
输变电建设项目中架空输电线路的建设需使用多种类型的铁塔,而不同塔型中导线相间距不同,其线路周边的电磁环境影响也不同,其中又以底导线水平相间距的影响为主。本文以福建某220 k V输变电工程为例,预测常用塔型不同底导线水平相间距...输变电建设项目中架空输电线路的建设需使用多种类型的铁塔,而不同塔型中导线相间距不同,其线路周边的电磁环境影响也不同,其中又以底导线水平相间距的影响为主。本文以福建某220 k V输变电工程为例,预测常用塔型不同底导线水平相间距产生的工频电场强度、磁感应强度,分析架空输电线路底导线水平相间距对输电线路周边电磁场的影响。展开更多
文摘Abstract Objective Higher levels of exposure to extremely low-frequency magnetic fields （ELF-MF） are associated with a slightly increased risk of childhood leukaemia. Compared with more-developed Western countries, higher exposure levels are evident in the Czech Republic, probably because of the different types of housing. In light of this, we aimed to examine the association between ELF-MF exposure and childhood leukaemia in the Czech Republic. Methods We conducted a paired case-control study. The cases （children with leukaemia） were age- sex- and permanent residence-matched to controls （children without leukaemia）. Although this limited potential bias and confounding, it also limited our number of participants. Results The matched analyses included 79 case-control pairs. No significant association between ELF-MF exposure and childhood leukaemia was observed for exposures over 0.2 μT （odds ratio [0R]=0.93, confidence interval [Cl]=0.45-1.93）, 0.3 μT （0R=0.77, Cl=0.34-1.75）, or 0.4 μT （OR=0.9, Cl=0.37-2.22）. Conclusion Despite higher levels of exposure in Middle and Eastern Europe, no indication of an association between ELF-MF exposure and childhood leukaemia was determined. This in contrast to the findings of previous studies conducted in different countries.
基金This work was supported by Natural Science Foundation of China(Item number:51777060,U1361109)Natural Science Foundation of Henan province(Item number:162300410117)the he innovative research team plan of Henan Polytechnic University(Item number:T2015-2).
文摘Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-thermal coupling method is proposed.The magnetic-thermal coupling mechanism is analyzed.The thermal network model and finite element model are built by this method,respectively.The effects of power frequency on iron losses and temperature fields are analyzed by the magnetic-thermal coupling finite element model under the condition of rated load,and the relationship between the load and temperature field is researched under the condition of the synchronous speed.In addition,the equivalent thermal network model is used to verify the magnetic-thermal coupling method.Then the temperatures of various nodes are obtained.The results show that there are advantages in both computational efficiency and accuracy for the proposed coupling method,which can be applied to other permanent magnet motors with complex structures.
文摘随着智能电网建设速度加快,为保证电力系统安全稳定运行,对电力系统参量信息进行提取分析的要求越来越高。当前,配电系统中大量配电架空线路电流难以实现非接触式的有效检测。针对此问题,提出了一种基于磁场反演的非接触式三相配电架空线路电流检测方法。首先根据磁场逆问题建立线路电流反演寻优模型,继而引入参考点机制的非支配排序遗传算法(non-dominated sorting genetic algorithm,NSGA-Ⅲ)对该模型进行求解,然后结合优劣解距离法(technique for order preference by similarity to ideal solution,TOPSIS)筛选出符合决策者要求的最优解,以此绘制拟合曲线并提取特征参数。最后通过算例分析与试验验证了所提方法的有效性和准确性。
基金Item Sponsored by Natural Science Fund of Liaoning Province of China[No.20062207]Open Subject Fund of Key Laboratory of Chemical Metallurgy Engineering,Liaoning Province[No.USTLKL201105]
文摘The dual-frequency electromagnetic ingot casting(DFEMIC)method with copper water-cooled ingot mold for extra heavy plate was developed.Electromagnetic field distribution in ingot mold was measured through the teslameter,the shielding effect of the copper ingot mold was judged,it is less than 37.7%of magnetic flux density when there is no ingot mold.The average shielding the magnetic field proportion of copper ingot mold reduced to 54.9%after loading '「' type the magnetic yoke and adjusting its distribution.Improving electromagnetic power can increase the magnetic field strength. Using the slit combination ingot mold could help increasing magnetic flux density in ingot mold.Steel structure outside ingot mold also have interference on magnetic field distribution in ingot mold,Therefore,it is important to paid more attention to electromagnetic shielding and the uniform symmetry of system structure.
文摘输变电建设项目中架空输电线路的建设需使用多种类型的铁塔,而不同塔型中导线相间距不同,其线路周边的电磁环境影响也不同,其中又以底导线水平相间距的影响为主。本文以福建某220 k V输变电工程为例,预测常用塔型不同底导线水平相间距产生的工频电场强度、磁感应强度,分析架空输电线路底导线水平相间距对输电线路周边电磁场的影响。
