Effects of nonlinear velocity slip and temperature jump onpseudo-plastic power-law fluid over moving permeable surface in presence of magnetic field

Flow and heat transfer of a pseudo-plastic power-law fluid over a stretching permeable surface with the magnetic effect is investigated. In the boundary conditions,the nonlinear temperature jump and the velocity slip are considered. Semi-similarity equations are obtained and solved by bvp4c with MATLAB. The problem can be considered as an extension of the previous work done by Mahmoud(Mahmoud, M. A. A. Slip velocity effect on a non-Newtonian power-law fluid over a moving permeable surface with heat generation. Mathematical and Computer Modelling, 54, 1228–1237(2011)). Efforts are made to discuss the effects of the power-law number, slip velocity, and temperature jump on the dimensionless velocity and temperature distribution.

Symmetries of boundary layer equations of power-law fluids of second grade

A modified power-law fluid of second grade is considered. The model is a combination of power-law and second grade fluid in which the fluid may exhibit normal stresses, shear thinning or shear thickening behaviors. The equations of motion are derived for two dimensional incompressible flows, and from which the boundary layer equations are derived. Symmetries of the boundary layer equations are found by using Lie group theory, and then group classification with respect to power-law index is performed. By using one of the symmetries, namely the scaling symmetry, the partial differential system is transformed into an ordinary differential system, which is numerically integrated under the classical boundary layer conditions. Effects of power-law index and second grade coefficient on the boundary layers are shown and solutions are contrasted with the usual second grade fluid solutions.

The axisymmetric long-wave interfacial stability of core-annular flow of power-law fluid with surfactant

The long wave stability of core-annular flow of power-law fluids with an axial pressure gradient is investigated at low Reynolds number. The interface between the two fluids is populated with an insoluble surfactant. The analytic solution for the growth rate of perturbation is obtained with long wave approximation. We are mainly concerned with the effects of shear-thinning/thickening property and interfacial surfactant on the flow stability. The results show that the influence of shear-thinning/thickening property accounts to the change of the capillary number. For a clean interface, the shear-thinning property enhances the capillary instability when the interface is close to the pipe wall. The converse is true when the interface is close to the pipe centerline. For shear-thickening fluids, the situation is reversed. When the interface is close to the pipe centerline, the capillary instability can be restrained due to the influence of surfactant. A parameter set can be found under which the flow is linearly stable.

THE TRANSIENT ELLIPTIC FLOW OF POWER-LAW FLUID IN FRACTAL POROUS MEDIA

The steady oil production and pressure distribution formulae of vertically fractured well for power-law non-Newtonian fluid were derived on the basis of the elliptic flow model in fractal reservoirs. The corresponding transient flow in fractal reservoirs was studied by numerical differentiation method: the influence of fractal index to transient pressure of vertically fractured well was analyzed. Finally the approximate analytical solution of transient flow was given by average mass conservation law. The study shows that using elliptic flow method to analyze the flow of vertically fractured well is a simple method.

MHD flow of power-law fluid on moving surface with power-law velocity and special injection/blowing

The problem of magnetohydrodynamic （MHD） flow on a moving surface with the power-law velocity and special injection/blowing is investigated. A scaling group transformation is used to reduce the governing equations to a system of ordinary differen- tial equations. The skin friction coefficients of the MHD boundary layer flow are derived, and the approximate solutions of the flow characteristics are obtained with the homotopy analysis method （HAM）. The approximate solutions are easily computed by use of a high order iterative procedure, and the effects of the power-law index, the magnetic parameter, and the special suction/blowing parameter on the dynamics are analyzed. The obtained results are compared with the numerical results published in the literature, verifying the reliability of the approximate solutions.

Exact solution to peristaltic transport of power-law fluid in asymmetric channel with compliant walls

Effects of compliant wall properties on the peristaltic flow of a non-Newtonian fluid in an asymmetric channel are investigated.The rheological characteristics are characterized by the constitutive equations of a power-law fluid.Long wavelength and low Reynolds number approximations are adopted in the presentation of mathematical developments.Exact solutions are established for the stream function and velocity.The streamlines pattern and trapping are given due attention.Salient features of the key parameters entering into the present flow are displayed and important conclusions are pointed out.

A WEIGHTED PENALTY FINITE ELEMENT METHOD FOR THE ANALYSIS OF POWER-LAW FLUID FLOW PROBLEMS

In this paper, a new finite element method for the flow analysis of the viscous incompressible power-law fluid is proposed by the use of penalty-hybrid/mixed finite element formulation and by the introduction of an alternative perturbation, which is weighted by viscosity, of the continuity equation. A numerical example is presented to exhibit the efficiency of the method.

Computational analysis of the flow of pseudoplastic power-law fluids in a microchannel plate

The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especially in the microchannel slits,flow pattern along the outlet arc and the pressure drop through the whole of microchannel plate were investigated at different power-law flow indexes.The results showed that the velocity profile in the microchannel slits for low flow index fluids was similar to the plug flow and had uniform pattern.Also the power-law fluids with lower flow indexes had lower stagnation zones near the outlet of the microchannel plate.The pressure drop through the microchannel plate showed huge differences between the fluids.The most interesting result was that the pressure drops for power-law fluids were very smaller than that of Newtonian fluids.In addition,the heat transfer of the fluids through the microchannel with different channel numbers in a wide range of Reynolds number was investigated.For power-law fluid with flow index(n=0.4),the Nusselt number increases continuously as the number of channels increases.The results highlight the potential use of using pseudoplastic fluids in the microheat exchangers which can lower the pressure drop and increase the heat transfer efficiency.

Simplified Wave Models Applicability to Shallow Mud Flows Modeled as Power-Law Fluids

Simplified wave models- such as kinematic,diffusion and quasi-steady- are widely employed as a convenient replacement of the full dynamic one in the analysis of unsteady open-channel flows,and especially for flood routing.While their use may guarantee a significant reduction of the computational effort,it is mandatory to define the conditions in which they may be confidently applied.The present paper investigates the applicability conditions of the kinematic,diffusion and quasisteady dynamic shallow wave models for mud flows of power-law fluids.The power-law model describes in an adequate and convenient way fluids that at low shear rates fluids do not posses yield stress,such as clay or kaolin suspensions,which are frequently encountered in Chinese rivers.In the framework of a linear analysis,the propagation characteristics of a periodic perturbation of an initial steady uniform flow predicted by the simplified models are compared with those of the full dynamic one.Based on this comparison,applicability criteria for the different wave approximations for mud flood of power-law fluids are derived.The presented results provide guidelines for selecting the appropriate approximation for a given flow problem,and therefore they may represent a useful tool for engineering predictions.

Mixture flow of particles and power-law fluid in round peristaltic tube

The erythrocyte and blood flowing in the blood vessel can be treated as the two-phase flow of the mixture of particles and a power-law fluid in a peristaltic tube.In the present work, the peristaltic transport of a power-law fluid and the suspension of particles in a tube is investigated by a perturbation method using the long wavelength approximation. The influence of different parameters on the velocity profile and streamlines is explored. Results show that there is a deflection of the flow field when the power-law index n = 0.5 or 1.5 compared with the Newtonian fluid where the trapping zone is symmetric to a certain cross section. The flux rate and reflux of the material are identified,and the conditions under which the reflux appears are determined. Moreover, a reflux phenomenon occurs near the wall. The trapping zone is related to not only the tube geometry and the flow flux but also the fluid properties. Both the length and width of the trapping zone increase with an increase in θ or φ. The trapping zone is more difficult to produce in the shear-thinning fluid than the shear-thickening fluid.

Similarity solutions for non-Newtonian power-law fluid flow

The problem of the boundary layer flow of power law non-Newtonian fluids with a novel boundary condition is studied. The existence and uniqueness of the solutions are examined, which are found to depend on the curvature of the solutions for different values of the power law index n. It is established with the aid of the Picard-Lindelof theorem that the nonlinear boundary value problem has a unique solution in the global domain for all values of the power law index n but with certain conditions on the curva- ture of the solutions. This is done after a suitable transformation of the dependent and independent variables. For 0 〈 n ≤ 1, the solution has a positive curvature, while for n 〉 1, the solution has a negative or zero curvature on some part of the global domain. Some solutions are presented graphically to illustrate the results and the behaviors of the solutions.

Non-Newtonian Power-Law Fluid Flow and Heat Transfer over a Non-Linearly Stretching Surface

The problem of magneto-hydrodynamic flow and heat transfer of an electrically conducting non-Newtonian power-law fluid past a non-linearly stretching surface in the presence of a transverse magnetic field is considered. The stretching velocity, the temperature and the transverse magnetic field are assumed to vary in a power-law with the distance from the origin. The flow is induced due to an infinite elastic sheet which is stretched in its own plane. The governing equations are reduced to non-linear ordinary differential equations by means of similarity transformations. These equations are then solved numerically by an implicit finite-difference scheme known as Keller-Box method. The numerical solution is found to be dependent on several governing parameters, including the magnetic field parameter, power-law index, velocity exponent parameter, temperature exponent parameter, Modified Prandtl number and heat source/sink parameter. A systematic study is carried out to illustrate the effects of these parameters on the fluid velocity and the temperature distribution in the boundary layer. The results for the local skin-friction coefficient and the local Nusselt number are tabulated and discussed. The results obtained reveal many interesting behaviors that warrant further study on the equations related to non-Newtonian fluid phenomena.

Unsteady Hydro-Magnetic Heat and Mass Transfer Flow of a Non-Newtonian Power-Law Fluid past a Flat Plate in the Presence of Homogeneous Chemical Reaction

This paper investigates the flow, heat andmass transfer of a power law fluid from a vertical plate in presence of a magnetic field. The resulting non-linear partial differential equations governing the flow together with the boundary conditions are reduced to non-dimensional form. The governing equations are discretized using implicit finite difference scheme and solved numerically. The velocity, temperature and concentration profile are presented graphically while the skin friction, local Nusselt number and the Sherwood number are presented in tabular form for different values of parameters of the problem.

Modulation Equations for Roll Waves on Vertically Falling Films of a Power-Law Fluid

Waves of finite amplitude on a thin layer of non-Newtonian fluid modelled as a power-law fluid are considered. In the long wave approximation, the system of equations taking into account the viscous and nonlinear effects has the hyper- bolic type. For the two-parameter family of periodic waves in the film flow on a vertical wall the modulation equations for nonlinear wave trains are derived and investigated. The stability criterium for roll waves based on the hyperbolicity of the modulation equations is suggested. It is shown that the evolution of stable roll waves can be described by self-similar solutions of the modulation equations.

Natural convection of non-Newtonian power-law fluid over axisymmetric and two-dimensional bodies of arbitrary shape in fluid-saturated porous media

Numerical analysis of the free convection coupled heat and mass transfer is presented for non-Newtonian power-law fluids with the yield stress flowing over a two-dimensional or axisymmetric body of an arbitrary shape in a fluid-saturated porous medium. The governing boundary layer equations and boundary conditions are cast into a dimensionless form by the similarity transformation. The resulting system of equations is solved by a finite difference method. The parameters studied are the rheological constants, the buoyancy ratio, and the Lewis number. Representative velocity, temperature, and concentration profiles are presented and discussed. It is found that the results depend strongly on the values of the yield stress parameter and the power-law index of the non-Newtonian fluid.

Dynamics of self-organizing single-line particle trains in the channel flow of a power-law fluid

The formation of self-organizing single-line particle train in a channel flow of a power-law fluid is studied using the lattice Boltzmann method with power-law index 0.6≤n≤1.2,particle volume concentration 0.8%≤Φ≤6.4%,Reynolds number 10≤Re≤100,and blockage ratio 0.2≤k≤0.4.The numerical method is validated by comparing the present results with the previous ones.The effect n,Φ,Re and k on the interparticle spacing and parallelism of particle train is discussed.The results showed that the randomly distributed particles would migrate towards the vicinity of the equilibrium position and form the ordered particle train in the power-law fluid.The equilibrium position of particles is closer to the channel centerline in the shear-thickening fluid than that in the Newtonian fluid and shear-thinning fluid.The particles are not perfectly parallel in the equilibrium position,hence IH is used to describe the inclination of the line linking the equilibrium position of each particle.When self-organizing single-line particle train is formed,the particle train has a better parallelism and hence benefit for particle focusing in the shearthickening fluid at highΦ,low Re and small k.Meanwhile,the interparticle spacing is the largest and hence benefit for particle separation in the shear-thinning fluid at lowΦ,low Re and small k.

Mixed convection in the heated semi-circular lid-driven cavity for non-Newtonian power-law fluids: Effect of presence and shape of the block

The present work delineates the hydrodynamics and thermal characteristics due to mixed convection in the liddriven semi-circular cavity affected by the presence of the adiabatic block at its geometric center for twodimensional,steady-state,laminar and for non-Newtonian power-law fluids.The semi-circular cavity has a diameter of D.The horizontal wall/lid is sliding with a uniform horizontal velocity(u=U)and is subjugated to the ambient thermal condition;while the curved surface is subjugated to a higher isothermal temperature.The convective characteristics inside the system is explored for the broad range of Richardson number(0.1≤Ri≤10),Prandtl number(1≤Pr≤100)and non-Newtonian power-law index(0.5≤n≤1.5)at a constant Grashof number of 10~4.Apart from this,the effect of shape(cross-section)of the inserted block,i.e.,circular,square and triangular on heat transfer characteristics has also been explored.It is observed that the shear thickening fluids display better cooling characteristics.Besides,the cavity with immersed triangular block shows better heat transfer results than the circular and square blocks.The deviations observed in the flow and heat transfer characteristics in the cavity by inserting an adiabatic block as compared with cavity without block have been ascertained by calculating normalized Nusselt number(Nu^N).The presence of the block was found to have a diminishing effect on the heat transfer due to convection in the cavity.In the end,the results of the study are summarized in the form of a predictive correlation exhibiting the functional dependence of average Nusselt number with Prandtl number,power-law index,and Richardson number.

Fractal Analysis of Power-Law Fluid in a Single Capillary

为怎么评价的分数维的表情和为在一个单身者的幂定律液体的水力的电导率毛状基于曲折 capillaries 的分数维的性质被导出。在建议表达式的每个参数有清楚的物理意思。为幂定律液体的流动率和水力的电导率被发现与扭曲分数维图形尺寸和幂定律索引有关。为幂定律液体的流动率与增加的幂定律索引增加，但是与增加的扭曲分数维图形尺寸减少。在为在毛状的一个分数维图形并且在收敛分叉管的流动的模型预言之间的好同意被获得。结果建议分数维的毛状的模型能被用来与不同变阻器为幂定律液体建模逻辑性质。

Analytical Study of the Electroosmotic Flow of Two Immiscible Power-Law Fluids in a Microchannel

The multilayer microchannel flow is a promising tool in microchannel-based systems such as hybrid microfluidics. To assist in the efficient design of two-liquid pumping system, a two-fluid electroosmotic flow of immiscible power-law fluids through a microtube is studied with consideration of zeta potential difference near the two-liquid interface. The modified Cauchy momentum equation in cylindrical coordinate governing the two-liquid velocity distributions is solved where both peripheral and inner liquids are represented by power-law model. The two-fluid velocity distribution under the combined interaction of power-law rheological effect and circular wall effect is evaluated at different viscosities and different electroosmotic characters of inner and peripheral power-law fluids. The velocity of inner flow is a function of the viscosities, electric properties and electroosmotic characters of two power-law fluids, while the peripheral flow is majorly influenced by the viscosity, electric property and electroosmotic characters of peripheral fluid. Irrespective of the configuration manner of power-law fluids, the shear thinning fluid is more sensitive to the change of other parameters.

Endoscopic intramural cystogastrostomy for treatment of peripancreatic fluid collection: A viewpoint from a surgeon

Percutaneous or endoscopic drainage is the initial choice for the treatment of peripancreatic fluid collection in symptomatic patients.Endoscopic transgastric fenestration(ETGF)was first reported for the management of pancreatic pseu-docysts of 20 patients in 2008.From a surgeon’s viewpoint,ETGF is a similar procedure to cystogastrostomy in that they both produce a wide outlet orifice for the drainage of fluid and necrotic debris.ETGF can be performed at least 4 wk after the initial onset of acute pancreatitis and it has a high priority over the surgical approach.However,the surgical approach usually has a better success rate because surgical cystogastrostomy has a wider outlet(>6 cm vs 2 cm)than ETGF.However,percutaneous or endoscopic drainage,ETGF,and surgical approach offer various treatment options for peripancreatic fluid collection patients based on their conditions.