Pre-pregnant Overweight Interacts with ADIPOQ Genetic Variants to Influence Polyunsaturated Fatty Acids in Human Milk

Adiponectin,a specific hormone protein secreted by adipocytes,is a protective factor in the human body and has attracted great attention due to its anti-obesity activity[1,2].The adiponectin gene(ADIPOQ),which is located on human chromosome 3q27,is a single-copy gene.Various single-nucleotide polymorphisms(SNPs)of the human ADIPOQ play an important role in energy balance and are associated with body mass index(BMI)and obesity[3,4].Longchain polyunsaturated fatty acids(LC-PUFAs)have been identified to exert an important role during the first 1,000 days of life on infant growth,neurodevelopment,and visual acuity.Fatty acids,such asα-linoleic acid(ALA,C18:3n-3)and linoleic acid(LA,C18:2n-6),which cannot be synthesized de novo from other lipids,are necessary for biological reactions.Some fatty acids such as docosahexaenoic acid(DHA,C22:6n-3)and eicosapentaenoic acid(EPA,C20:5n-3)can be synthesized in neonates from their precursors(LA and ALA).Because of the very low conversion rates in the neonatal liver,it is crucial to provide adequate LC-PUFAs in the diet from early infancy.

Association between pre-pregnancy body mass index and gestational weight gain and the risk of preeclampsia:A systematic review and meta-analysis

Objective:To analyze the relationship between body mass index(BMI)before pregnancy and gestational weight gain throughout pregnancy with the incidence of preeclampsia.Methods:This was a systematic review-meta analysis of literature collected from three e-databases:Scopus,PubMed,and Science Direct.Quality assessment was measured with the Effective Public Health Practice Project methods.Meta-analysis was done by calculating the fixed and random-effects of odds ratio(OR)for each BMI category and gestational weight gain as compared with the incidence of preeclampsia.Results:Overweight was associated with a significantly increased risk of preeclampsia(OR=2.152,95%CI 1.363-3.400;P=0.001).Obesity was also associated with a noticeably increased risk of preeclampsia(OR=2.856,95%CI 1.755-4.649;P<0.001).Meanwhile,underweight was associated with a significantly reduced risk of preeclampsia(OR=0.639,95%CI 0.500-0.817;P<0.001)when compared with normal BMI.Pregnant women who gained weight below the standard throughout pregnancy was a protective factor from preeclampsia(OR=0.813,95%CI 0.610-1.083;P=0.157)whereas pregnant women who gained weight above the standard had almost doubled risk of preeclampsia(OR=1.850,95%CI 1.377-2.485;P<0.001).Conclusions:The result of this study affirms the role of overweight-obesity pre-pregnancy,and gestational weight gain above the standard during pregnancy as significant risk factors for developing preeclampsia.

Longitudinal changes in body weight of breastfeeding mothers in the first year after delivery and its relationship with human milk composition:a combined longitudinal and cross-sectional cohort study

Objective:Postpartum weight retention(PPWR)is a common problem among women after childbirth.The main objectives of this study are to understand the changes in body weight of breastfeeding mothers during long-term follow-up and preliminarily explore the relationship between maternal body weight and human milk composition,including macronutrients,leptin,and adiponectin.Methods:The study included a longitudinal cohort(122 mothers),and a cross-sectional cohort(37 mothers).The human milk,maternal weight,and dietary surveys were collected in the longitudinal cohort at different follow-up time points(1-14 days postpartum,2-4 months postpartum,5-7 months postpartum,and 12-17 months postpartum).The maternal body weight was analyzed using the responses in the survey questionnaires.A milk analyzer based on the mid-infrared spectroscopy(MIRS)was used to determine milk composition,and nutrition analysis software evaluated dietary intakes.In the cross-sectional cohort,participating mothers were asked to provide blood and human milk samples and pertinent information related to maternal body composition.Maternal body composition was measured by bioelectrical impedance analysis(BIA),while ELISA analyzed leptin and adiponectin in milk and serum.Results:At 5-7 months postpartum,the PPWR of breastfeeding mothers was(2.46±3.59)kg.At 12-17 months postpartum,the PPWR was(0.98±4.06)kg.PPWR was found to be negatively correlated with milk fat content within 14 days postpartum and positively correlated at 2-4 months postpartum.In addition,the maternal weight and body muscle mass were positively correlated with leptin and adiponectin in milk.Plasma leptin was positively correlated with the mother’s body weight,body mass index(BMI),FAT percentage,and body fat mass,while plasma adiponectin did not correlate with any parameter.The results also indicate that the PPWR did not correlate with leptin and adiponectin in plasma or milk.Conclusions:Breastfeeding mothers may retain considerable weight gain one year after delivery.Human milk composition may be related to changes in maternal body weight.Leptin and adiponectin in breast milk and leptin in plasma are associated with the maternal body composition.This study supports the notion that maternal nutritional status may affect offspring health through lactation,and future research should focus on exploring weight management of postpartum mothers.

Orbit Weighting Scheme in the Context of Vector Space Information Retrieval

This study introduces the Orbit Weighting Scheme(OWS),a novel approach aimed at enhancing the precision and efficiency of Vector Space information retrieval(IR)models,which have traditionally relied on weighting schemes like tf-idf and BM25.These conventional methods often struggle with accurately capturing document relevance,leading to inefficiencies in both retrieval performance and index size management.OWS proposes a dynamic weighting mechanism that evaluates the significance of terms based on their orbital position within the vector space,emphasizing term relationships and distribution patterns overlooked by existing models.Our research focuses on evaluating OWS’s impact on model accuracy using Information Retrieval metrics like Recall,Precision,InterpolatedAverage Precision(IAP),andMeanAverage Precision(MAP).Additionally,we assessOWS’s effectiveness in reducing the inverted index size,crucial for model efficiency.We compare OWS-based retrieval models against others using different schemes,including tf-idf variations and BM25Delta.Results reveal OWS’s superiority,achieving a 54%Recall and 81%MAP,and a notable 38%reduction in the inverted index size.This highlights OWS’s potential in optimizing retrieval processes and underscores the need for further research in this underrepresented area to fully leverage OWS’s capabilities in information retrieval methodologies.

Optimal investment based on relative performance and weighted utility

This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance comparison to a predefined reference point. We find the optimal investment strategy by maximizing a weighted average utility of a concave utility and an Sshaped utility via a concavification technique and the martingale method. Numerical results are carried out to show the impact of the extent to which the manager pays attention to the change of relative performance related to the reference point on the optimal terminal relative performance.

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

A redundant subspace weighting procedure for clock ensemble

A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.

Curve Classification Based onMean-Variance Feature Weighting and Its Application

The classification of functional data has drawn much attention in recent years.The main challenge is representing infinite-dimensional functional data by finite-dimensional features while utilizing those features to achieve better classification accuracy.In this paper,we propose a mean-variance-based(MV)feature weighting method for classifying functional data or functional curves.In the feature extraction stage,each sample curve is approximated by B-splines to transfer features to the coefficients of the spline basis.After that,a feature weighting approach based on statistical principles is introduced by comprehensively considering the between-class differences and within-class variations of the coefficients.We also introduce a scaling parameter to adjust the gap between the weights of features.The new feature weighting approach can adaptively enhance noteworthy local features while mitigating the impact of confusing features.The algorithms for feature weighted K-nearest neighbor and support vector machine classifiers are both provided.Moreover,the new approach can be well integrated into existing functional data classifiers,such as the generalized functional linear model and functional linear discriminant analysis,resulting in a more accurate classification.The performance of the mean-variance-based classifiers is evaluated by simulation studies and real data.The results show that the newfeatureweighting approach significantly improves the classification accuracy for complex functional data.

Genetic dissection and validation of a major QTL for grain weight on chromosome 3B in bread wheat(Triticum aestivum L.)

Grain weight is one of the key components of wheat(Triticum aestivum L.)yield.Genetic manipulation of grain weight is an efficient approach for improving yield potential in breeding programs.A recombinant inbred line(RIL)population derived from a cross between W7268 and Chuanyu 12(CY12)was employed to detect quantitative trait loci(QTLs)for thousand-grain weight(TGW),grain length(GL),grain width(GW),and the ratio of grain length to width(GLW)in six environments.Seven major QTLs,QGl.cib-2D,QGw.cib-2D,QGw.cib-3B,QGw.cib-4B.1,QGlw.cib-2D.1,QTgw.cib-2D.1 and QTgw.cib-3B.1,were consistently identified in at least four environments and the best linear unbiased estimation(BLUE)datasets,and they explained 2.61 to 34.85%of the phenotypic variance.Significant interactions were detected between the two major TGW QTLs and three major GW loci.In addition,QTgw.cib-3B.1 and QGw.cib-3B were co-located,and the improved TGW at this locus was contributed by GW.Unlike other loci,QTgw.cib-3B.1/QGw.cib-3B had no effect on grain number per spike(GNS).They were further validated in advanced lines using Kompetitive Allele Specific PCR(KASP)markers,and a comparison analysis indicated that QTgw.cib-3B.1/QGw.cib-3B is likely a novel locus.Six haplotypes were identified in the region of this QTL and their distribution frequencies varied between the landraces and cultivars.According to gene annotation,spatial expression patterns,ortholog analysis and sequence variation,the candidate gene of QTgw.cib-3B.1/QGw.cib-3B was predicted.Collectively,the major QTLs and KASP markers reported here provide valuable information for elucidating the genetic architecture of grain weight and for molecular marker-assisted breeding in grain yield improvement.

Spatial search weighting information contained in cell velocity distribution

Cell migration plays a significant role in physiological and pathological processes.Understanding the characteristics of cell movement is crucial for comprehending biological processes such as cell functionality,cell migration,and cell–cell interactions.One of the fundamental characteristics of cell movement is the specific distribution of cell speed,containing valuable information that still requires comprehensive understanding.This article investigates the distribution of mean velocities along cell trajectories,with a focus on optimizing the efficiency of cell food search in the context of the entire colony.We confirm that the specific velocity distribution in the experiments corresponds to an optimal search efficiency when spatial weighting is considered.The simulation results indicate that the distribution of average velocity does not align with the optimal search efficiency when employing average spatial weighting.However,when considering the distribution of central spatial weighting,the specific velocity distribution in the experiment is shown to correspond to the optimal search efficiency.Our simulations reveal that for any given distribution of average velocity,a specific central spatial weighting can be identified among the possible central spatial weighting that aligns with the optimal search strategy.Additionally,our work presents a method for determining the spatial weights embedded in the velocity distribution of cell movement.Our results have provided new avenues for further investigation of significant topics,such as relationship between cell behavior and environmental conditions throughout their evolutionary history,and how cells achieve collective cooperation through cell-cell communication.

Chemical modification of barite for improving the performance of weighting materials for water-based drilling fluids

With increasing drilling depth and large dosage of weighting materials,drilling fluids with high solid content are characterized by poor stability,high viscosity,large water loss,and thick mud cake,easier leading to reservoir damage and wellbore instability.In this paper,micronized barite(MB)was modified(mMB)by grafting with hydrophilic polymer onto the surface through the free radical polymerization to displace conventional API barite partly.The suspension stability of water-based drilling fluids(WBDFs)weighted with API barite:mMB=2:1 in 600 g was significantly enhanced compared with that with API barite/WBDFs,exhibiting the static sag factor within 0.54 and the whole stability index of 2.The viscosity and yield point reached the minimum,with a reduction of more than 40%compared with API barite only at the same density.Through multi-stage filling and dense accumulation of weighting materials and clays,filtration loss was decreased,mud cake quality was improved,and simultaneously it had great reservoir protection performance,and the permeability recovery rate reached 87%.In addition,it also effectively improved the lubricity of WBDFs.The sticking coefficient of mud cake was reduced by 53.4%,and the friction coefficient was 0.2603.Therefore,mMB can serve as a versatile additive to control the density,rheology,filtration,and stability of WBDFs weighted with API barite,thus regulating comprehensive performance and achieving reservoir protection capacity.This work opened up a new path for the productive drilling of extremely deep and intricate wells by providing an efficient method for managing the performance of high-density WBDFs.

Comparative Efficacy of Lifestyle Modifications versus Pharmacotherapy on Weight Loss and Metabolic Health Outcomes: A Comprehensive Review

Background: Obesity has become a serious global public health challenge, given that it leads to various adverse health outcomes that include cardiovascular illnesses, diabetes, and certain types of cancer. The World Health Organization (WHO) has estimated that, at the end of 2022, 1 out of every 8 individuals were obese, and that the global adult obesity rates have over doubled since 1990, even as the adolescent obesity rates have quadrupled. Thus, as of 2022, nearly 2.5 billion adults, aged 18 years and above, were overweight, with 890 million being obese. Obesity and overweight incidence rate has been gradually increasing over the years, presenting significant challenges to the healthcare systems throughout the globe. In this regard, the objective of this systematic review was to evaluate the effectiveness and safety of lifestyle modifications (diet and physical activity) and pharmacotherapy in promoting weight loss and improving metabolic health in overweight adults. Methodology: To attain the above stated study objective, a systematic evaluation of previous studies was carried out, particularly studies that assessed the effectiveness and safety of lifestyle modifications (diet and physical activity) and pharmacotherapy in promoting weight loss and improving metabolic health in overweight adults. The authors have used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) in the selection of eligible studies for inclusion in the study. Results: The findings indicate that lifestyle interventions resulted in 5% - 10% weight reduction and significant improvements in metabolic indicators, while pharmacotherapy (GLP-1 receptor agonists) achieved up to 15% weight reduction and considerable metabolic health benefits. Further, comparative studies show lifestyle modifications provide overall health benefits, while medication is necessary for non-responders. Conclusion: Individualized treatment strategies are crucial, and further research is needed on long-term consequences and combination therapies.

The Weighted Basis for PHT-Splines

PHT-splines are defined as polynomial splines over hierarchical T-meshes with very efficient local refinement properties.The original PHT-spline basis functions constructed by the truncation mechanism have a decay phenomenon,resulting in numerical instability.The non-decay basis functions are constructed as the B-splines that are defined on the 2×2 tensor product meshes associated with basis vertices in Kang et al.,but at the cost of losing the partition of unity.In the field of finite element analysis and topology optimization,forming the partition of unity is the default ingredient for constructing basis functions of approximate spaces.In this paper,we will show that the non-decay PHT-spline basis functions proposed by Kang et al.can be appropriately modified to form a partition of unity.Each non-decay basis function is multiplied by a positive weight to form the weighted basis.The weights are solved such that the sum of weighted bases is equal to 1 on the domain.We provide two methods for calculatingweights,based on geometric information of basis functions and the subdivision of PHT-splines.Weights are given in the form of explicit formulas and can be efficiently calculated.We also prove that the weights on the admissible hierarchical T-meshes are positive.

Low Birth Weight in Cameroon: Research and Analysis of Factors Associated with Their Occurrence in Douala Maternity Wards

Introduction: Low birth weight (LBW) is defined by the World Health Organization (WHO) as a birth weight strictly below 2500 g, whatever the term of pregnancy. It constitutes a major public health problem, both in developed and developing countries, due to its magnitude and its strong association with infant morbidity and mortality. Main objective was to study the factors associated with the occurrence of small-for-gestational-age newborns in Douala. Methodology: We carried out a cross-sectional analytical study with prospective data collection using a technical pretested sheet in the maternity wards of the Douala General Hospital, the Laquintinie Hospital, and the District hospitals of Deido, Nylon and Bonassama over a period of 4 months (January to April 2020). We were interested in any newborn, born alive, vaginally or by cesarean section, of low weight, seen in the first 24 hours from a full-term single-fetal pregnancy whose mother had given her consent. Our sampling was consecutive and non-exhaustive. We excluded newborns whose term was unclear and those with congenital malformations or signs of embryo-foetopathy. Data collection was done using survey sheets. Statistical analyzes were carried out with CS Pro 7.3 and SPSS version 25.0 software. The Student, Chi-square and Fischer tests were used to compare the means of the variables, the percentages with a significance threshold P value Results: During the study period, 305 full-term newborns were included, divided into 172 boys and 133 girls. The percentage of small-for-gestational-age newborns was 9.8%;after multivariate analysis by logistic regression to eliminate confounding factors, we found maternal factors associated with small for gestational age newborns;maternal age less than 20 years, primiparity, gestational age (37 - 38), a delay in prenatal visits greater than 14 weeks, anemia in pregnancy, positive toxoplasmosis serology in pregnancy, a body mass index of Conclusion: Our study revealed the potential determinants of low birth weight at term in the Cameroonian urban context and specifically in Douala.

Geographically and Temporally Weighted Regression in Assessing Dengue Fever Spread Factors in Yunnan Border Regions

Objective This study employs the Geographically and Temporally Weighted Regression(GTWR)model to assess the impact of meteorological elements and imported cases on dengue fever outbreaks,emphasizing the spatial-temporal variability of these factors in border regions.Methods We conducted a descriptive analysis of dengue fever’s temporal-spatial distribution in Yunnan border areas.Utilizing annual data from 2013 to 2019,with each county in the Yunnan border serving as a spatial unit,we constructed a GTWR model to investigate the determinants of dengue fever and their spatio-temporal heterogeneity in this region.Results The GTWR model,proving more effective than Ordinary Least Squares(OLS)analysis,identified significant spatial and temporal heterogeneity in factors influencing dengue fever’s spread along the Yunnan border.Notably,the GTWR model revealed a substantial variation in the relationship between indigenous dengue fever incidence,meteorological variables,and imported cases across different counties.Conclusion In the Yunnan border areas,local dengue incidence is affected by temperature,humidity,precipitation,wind speed,and imported cases,with these factors’influence exhibiting notable spatial and temporal variation.

An Improved Solov2 Based on Attention Mechanism and Weighted Loss Function for Electrical Equipment Instance Segmentation

The current existing problem of deep learning framework for the detection and segmentation of electrical equipment is dominantly related to low precision.Because of the reliable,safe and easy-to-operate technology provided by deep learning-based video surveillance for unmanned inspection of electrical equipment,this paper uses the bottleneck attention module(BAM)attention mechanism to improve the Solov2 model and proposes a new electrical equipment segmentation mode.Firstly,the BAM attention mechanism is integrated into the feature extraction network to adaptively learn the correlation between feature channels,thereby improving the expression ability of the feature map;secondly,the weighted sum of CrossEntropy Loss and Dice loss is designed as the mask loss to improve the segmentation accuracy and robustness of the model;finally,the non-maximal suppression(NMS)algorithm to better handle the overlap problem in instance segmentation.Experimental results show that the proposed method achieves an average segmentation accuracy of mAP of 80.4% on three types of electrical equipment datasets,including transformers,insulators and voltage transformers,which improve the detection accuracy by more than 5.7% compared with the original Solov2 model.The segmentation model proposed can provide a focusing technical means for the intelligent management of power systems.

Low Birth Weight and Intermittent Preventive Treatment of Malaria in Pregnant Women in Lomé (Togo) in 2021: A Cross-Sectional Study

Background: Since 2012, the World Health Organization has recommended intermittent preventive treatment with sulfadoxine-pyrimethamine (IPT-SP) to prevent malaria-related complications in pregnant women. Ten years following these recommendations, we conducted this study to estimate the coverage for three doses of IPT-SP (IPT3) as well as the prevalence of low birth weight (LBW), and its associated factors in Lomé (Togo) in 2021. Methods: A cross-sectional study was conducted between January and March 2021. An exhaustive recruitment of women and their newborns was carried out in the maternity wards of the Sylvanus Olympio University Hospital Center. Data from antenatal consultations and clinical data of the newborns were collected. Multivariate logistic regression was carried out to determine factors associated with LBW. Results: A total of 252 mother-child pairs were included in this study. Median age of the mothers was 27 years, IQR [24-31]. More than a third (35.3%) of the mothers were primigravida. IPT3 coverage was 66.7% and 14.7% of newborns had a LBW. The prevalence of LBW was 33.3% [23.3-43.4] in women who had received fewer than 3 doses of IPT-SP and 5.4% [2.0-8.8] in those who had received at least 3 doses of IPT-SP (p Conclusion: Ten years following recommendations of the WHO on IPT-SP, malaria prevention based on IPT-SP is not optimal among pregnant women in Lomé, and the proportion of LBW children remains high. Actions to strengthen the three-dose IPT-SP policy are needed to prevent malaria and its consequences among newborns in Togo.

Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells

Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.

Unsupervised Color Segmentation with Reconstructed Spatial Weighted Gaussian Mixture Model and Random Color Histogram

Image classification and unsupervised image segmentation can be achieved using the Gaussian mixture model.Although the Gaussian mixture model enhances the flexibility of image segmentation,it does not reflect spatial information and is sensitive to the segmentation parameter.In this study,we first present an efficient algorithm that incorporates spatial information into the Gaussian mixture model(GMM)without parameter estimation.The proposed model highlights the residual region with considerable information and constructs color saliency.Second,we incorporate the content-based color saliency as spatial information in the Gaussian mixture model.The segmentation is performed by clustering each pixel into an appropriate component according to the expectation maximization and maximum criteria.Finally,the random color histogram assigns a unique color to each cluster and creates an attractive color by default for segmentation.A random color histogram serves as an effective tool for data visualization and is instrumental in the creation of generative art,facilitating both analytical and aesthetic objectives.For experiments,we have used the Berkeley segmentation dataset BSDS-500 and Microsoft Research in Cambridge dataset.In the study,the proposed model showcases notable advancements in unsupervised image segmentation,with probabilistic rand index(PRI)values reaching 0.80,BDE scores as low as 12.25 and 12.02,compactness variations at 0.59 and 0.7,and variation of information(VI)reduced to 2.0 and 1.49 for the BSDS-500 and MSRC datasets,respectively,outperforming current leading-edge methods and yielding more precise segmentations.

Algorithms and statistical analysis for linear structured weighted total least squares problem

Weighted total least squares(WTLS)have been regarded as the standard tool for the errors-in-variables(EIV)model in which all the elements in the observation vector and the coefficient matrix are contaminated with random errors.However,in many geodetic applications,some elements are error-free and some random observations appear repeatedly in different positions in the augmented coefficient matrix.It is called the linear structured EIV(LSEIV)model.Two kinds of methods are proposed for the LSEIV model from functional and stochastic modifications.On the one hand,the functional part of the LSEIV model is modified into the errors-in-observations(EIO)model.On the other hand,the stochastic model is modified by applying the Moore-Penrose inverse of the cofactor matrix.The algorithms are derived through the Lagrange multipliers method and linear approximation.The estimation principles and iterative formula of the parameters are proven to be consistent.The first-order approximate variance-covariance matrix(VCM)of the parameters is also derived.A numerical example is given to compare the performances of our proposed three algorithms with the STLS approach.Afterwards,the least squares(LS),total least squares(TLS)and linear structured weighted total least squares(LSWTLS)solutions are compared and the accuracy evaluation formula is proven to be feasible and effective.Finally,the LSWTLS is applied to the field of deformation analysis,which yields a better result than the traditional LS and TLS estimations.