HOI延迟对LEO卫星简化动力学POD的影响

通常使用无电离层(IF)线性组合(LC)消除低地球轨道(LEO)卫星简化动力学精密定轨(POD)一阶电离层延迟误差,忽略了高阶电离层(HOI)延迟误差。随着LEO卫星POD技术的发展,计算不同轨道高度的HOI延迟并探索其变化已成为进一步提高POD精度的重要手段。首先,使用国际参考电离层-2016(IRI-2016)和国际地磁参考场第13代(IGRF-13)模型,计算电离层穿刺点(IPP)位置和地磁场强度。其次,使用平滑星载GNSS数据计算电离层斜路径总电子含量(STEC)。然后,分别计算GOCE、GRACE-A和SWARM-A/B卫星的二阶和三阶电离层延迟。最后,评估了HOI延迟对LEO卫星重叠轨道分析、卫星激光测距(SLR)检核和精密科学轨道(PSO)比较结果的影响。实验结果表明:HOI延迟对LEO卫星简化动力学POD的影响大约在毫米至厘米的数量级上;HOI延迟对LEO卫星简化动力学POD外符合精度的影响分别达到0.92,0.22,0.21和0.18 mm;随着LEO卫星轨道高度的增加,HOI延迟对LEO卫星简化动力学POD的影响减小。

动量轮卸载对“天问一号”环火轨道影响分析

针对“天问一号”动量轮频繁喷气卸载对环火轨道的扰动问题,定性分析了动量轮卸载的摄动量级以及对环火段轨道的影响,在RTN(Radial Transverse Normal)坐标系下建立匀加速模型描述动量轮卸载产生的加速度,对环火中继段和遥感使命段分别采用2种策略计算分析,评估了不同飞行阶段的定轨预报精度。结果表明:频繁的动量轮卸载是影响环火段定轨精度的主要误差因素,目前条件下中继段定轨的位置精度为约150 m,在卸载更为频繁的遥感使命段,位置精度下降至约700 m。

近地小行星天地基协同监测和轨道确定试验

基于中国科学院国家天文台空间碎片试验望远镜,联合“仰望一号”“吉林一号”卫星,设计并开展了近地小行星天地基协同监测试验,利用图像处理和定轨方法,实现了天地基观测图像的目标检测和天文定位,完成了近地小行星轨道的精确确定。经分析,基于现有的天地基设备可实现对近地小行星的协同监测和轨道编目,为研判近地小行星撞击风险提供轨道数据支持。

顾及BDS-3星钟约束的GNSS超快速轨道钟差解算方法

BDS-3高稳定星载原子钟作为北斗星座的显著技术优势,在GNSS数据处理中尚未得到充分利用。针对严格时效性限制下GNSS超快速轨道钟差参数精度受限问题,本文提出顾及BDS-3星钟约束的GNSS超快速轨道钟差解算方法。首先,以GNSS轨道钟差参数间相关性为基础,构建顾及BDS-3星钟参数特性的GNSS定轨模型;然后,基于GNSS精密钟差产品,分析星钟约束对GNSS轨道钟差参数精度的影响规律;最后,为克服预报钟差精度与约束筛选对定轨影响,建立BDS-3星钟建模与GNSS超快速轨道钟差估计的同步处理方法。试验结果表明,在BDS-3星钟参数最优约束下,BDS-3与GPS轨道钟差精度可分别提升27.5%、5.1%和20.2%、5.2%;且较传统BDS-3星钟单历元处理策略,基于BDS-3星钟建模与GNSS超快速定轨同步处理方法,GNSS超快速轨道钟差精度可分别提升至4.8%与34.2%,轨道精度实现了毫米级改善。因此,顾及BDS-3星钟约束的GNSS超快速轨道钟差解算方法可有效对BDS-3高稳星钟信息模型化,并实现GNSS超快速轨道钟差精度的优化处理。

基于国产ARM架构CPU的导航卫星精密定轨解算效率优化方法

以国产飞腾CPU为例,讨论在国产ARM架构CPU基础上的导航卫星精密定轨解算效率优化方法。基于导航卫星精密定轨解算流程中钟差约化和法方程求逆耗时较多,分别利用多线程和OpenBlas对上述2个过程进行优化。结果表明,优化后解算效率大幅提升。钟差约化方面,采用100个测站32颗导航卫星进行解算时,原始单历元平均耗时1.105 s,优化后为0.188 s;法方程求逆方面,原始求逆平均耗时2 264 s,优化后仅需78 s。

VLBI观测对转发式测距GEO卫星定轨精度的贡献分析

联合甚长基线干涉测量(very long baseline interferometry,VLBI)时延数据与转发式(orbit determination by transfer tracking,ODTT)测距数据能够有效提高地球静止轨道(geostationary earth orbit,GEO)卫星定轨精度。参照位置精度衰减因子(position dilution of precision,PDOP)的改变,研究不同VLBI基线时延数据与转发式测距数据的联合对GEO卫星定轨精度的改善,可为特定条件下联合观测时VLBI基线的最优选择提供参考。基于中国科学院国家授时中心宽带VLBI系统和转发式测轨系统的实测数据,开展中星12号GEO卫星的定轨试验。试验结果表明定轨精度的提高与PDOP的降低成正相关。相比于转发式单独定轨,联合VLBI系统中的喀什—三亚基线,PDOP降低了3.00,定轨精度提高了11.48%;联合VLBI系统中的吉林—喀什基线,PDOP降低了3.38,定轨精度提高了14.73%;联合VLBI系统中的吉林—三亚基线,PDOP降低了6.90,定轨精度提高了19.75%;联合VLBI系统中的吉林—三亚和吉林—喀什两条基线,PDOP降低了9.94,定轨精度提高了27.23%。

On simulation of precise orbit determination of HY-2 with centimeter precision based on satellite-borne GPS technique

The HY-2 satellite carrying a satellite-borne GPS receiver is the first Chinese radar altimeter satellite, whose radial orbit determination precision must reach the centimeter level. Now HY-2 is in the test phase so that the observations are not openly released. In order to study the precise orbit determination precision and procedure for HY-2 based on the satellite- borne GPS technique, the satellite-borne GPS data are simulated in this paper. The HY-2 satellite-borne GPS antenna can receive at least seven GPS satellites each epoch, which can validate the GPS receiver and antenna design. What＇s more, the precise orbit determination processing flow is given and precise orbit determination experiments are conducted using the HY-2-borne GPS data with both the reduced-dynamic method and the kinematic geometry method. With the 1 and 3 mm phase data random errors, the radial orbit determination precision can achieve the centimeter level using these two methods and the kinematic orbit accuracy is slightly lower than that of the reduced-dynamic orbit. The earth gravity field model is an important factor which seriously affects the precise orbit determination of altimeter satellites. The reduced-dynamic orbit determination experiments are made with different earth gravity field models, such as EIGEN2, EGM96, TEG4, and GEMT3. Using a large number of high precision satellite-bome GPS data, the HY-2 precise orbit determination can reach the centimeter level with commonly used earth gravity field models up to above 50 degrees and orders.

“天问一号”探测器轨道确定及精度评估

“天问一号”是我国首个自主火星探测任务,高精度轨道确定是圆满完成工程任务和科学数据分析的基础。针对“天问一号”不同飞行阶段的轨道特性、力学环境及测量水平,本文采用不同策略进行轨道确定并评估精度,在地火转移阶段轨道精度优于4 km,环火停泊阶段轨道精度优于1 km,中继通信阶段轨道精度优于100 m;双程测距数据精度约为0.5 m,1 s积分双程测速数据精度约为0.2 mm/s,VLBI时延数据精度约为0.3 ns。“天问一号”定轨精度主要受到太阳光压和姿控模型误差影响,在定轨过程中求解光压系数和经验加速度十分必要。“天问一号”探测器光压系数与经验加速度存在一定程度的耦合,需要添加先验约束信息。

双线程滑动窗口多系统GNSS超快精密定轨实现及评估

全球导航卫星系统(GNSS)超快精密定轨为GNSS实时应用提供了高精度空间基准。基于天地协同定位、导航与授时(PNT)网络服务中心实现了四系统GNSS卫星超快精密定轨,并对定轨结果进行精度评价。介绍了天地协同PNT网络的概念内涵以及网络服务中心部署的超快精密定轨软件架构和详细功能,并针对实时应用需求提出了一种双线程滑动窗口超快精密定轨策略。最后利用重叠弧段比较、与外部轨道产品比较以及卫星激光测距(SLR)检核3种方式对定轨结果进行了精度评价。结果表明,与武汉大学分析中心的最终事后精密轨道产品相比,四系统GNSS MEO卫星预报6 h弧段的径向均方根(RMS)误差整体在2~5 cm水平,BDS2 IGSO卫星最小一维RMS误差在10~15 cm水平;GPS和Galileo卫星的SLR检核残差均值在1~3 cm水平,标准差在3~6 cm水平,能够满足后续厘米级实时应用对空间基准的精度需求。

LEO星载GPS实时精密定轨伪模糊度随机过程参数优化

提出在定轨策略及其他变量不变的情况下,使用一种数值步进的搜索比较方法,以确定伪模糊度随机过程参数的最优设置。使用GRACE-C、SWARM-A两颗LEO卫星2021年doy92~101共10 d的GPS数据及同时段的CNT、MADOCA两种实时精密星历产品,以模拟在轨实时精密定轨的方式,对伪模糊度随机过程参数开展优化实验。结果表明,在伪模糊度参数最优值方案下,两颗LEO卫星的实时精密定轨三维位置误差(RMS)约为4.62~7.56 cm,相比于传统模糊度浮点解方案,使用CNT和MADOCA产品的实时定轨精度分别平均提升约39.15%和29.61%。

FCM测站定权的LAGEOS-2卫星精密定轨影响分析

由于卫星激光测距(satellite laser ranging, SLR)台站的测距精度和稳定性存在差异,精密定轨中需要对不同性能的台站赋予不同权重。本文将模糊C均值(fuzzy C-means, FCM)聚类定权应用于LAGEOS-2精密定轨,并比较原始测站定权和FCM定权对轨道精度的影响。结果表明:1)相较于原始测站定权,FCM定权更能反映各SLR台站的性能,提高定轨精度和观测值数量;2)对于ILRS四个质量分析机构,原始测站定权下JCET发布的质量报告在定轨精度上略优于其他中心,采用FCM定权后,以4个机构发布的质量报告进行定轨的结果在同一水平,轨道精度为4.83~4.86 cm。

大规模低轨星座的实时精密定轨技术

在全球导航卫星系统的支撑下,分析地面集中解算和星上自主解算精密定轨的优缺点,并将高精度轨道非保守力模型应用于星上实时自主定轨算法,实现运动学和动力学定轨的分离,对于需要频繁机动的低轨卫星精密定轨具有显著优势。结果表明,辐射光压和大气阻力非保守力物理模型计算的加速度精度约5 nm/s^(2);采用广播星历进行定轨解算可以达到0.8 m位置精度,低轨卫星速度误差约1.1 mm/s;采用实时精密星历,位置精度可以达到8.0 cm,卫星速度精度约0.1 mm/s。低轨卫星实时精密定轨和预报方法可有效支撑大规模低轨星座的导航功能实现。

Influence of higher-order ionospheric delay correction on GPS precise orbit determination and precise positioning

At present, Global Navigation Satellite Systems（GNSS） users usually eliminate the influence of ionospheric delay of the first order items by dual-frequency ionosphere-free combination. But there is still residual ionospheric delay error of higher order term. The influence of the higher-order ionospheric corrections on both GPS precision orbit determination and static Precise Point Positioning（PPP） are studied in this paper. The influence of higher-order corrections on GPS precision orbit determination, GPS observations and static PPP are analyzed by neglecting or considering the higher-order ionospheric corrections by using a globally distributed network which is composed of International GNSS Service（IGS） tracking stations. Numerical experimental results show that, the root mean square（RMS） in three dimensions of satellite orbit is 36.6 mme35.5 mm. The maximal second-order ionospheric correction is 9 cm, and the maximal third-order ionospheric correction is 1 cm. Higher-order corrections are influenced by latitude and station distribution. PPP is within 3 mm in the directions of east and up. Furthermore, the impact is mainly visible in the direction of north, showing a southward migration trend, especially at the lower latitudes where the influence value is likely to be bigger than 3 mm.

Reducing Influence of Gravity Model Error in Precise Orbit Determination of Low Earth Orbit Satellites

Based on the orbit integration and orbit fitting method, the influence of the characters of the gravity model, with different precisions, on the movement of low Earth orbit satellites was studied. The way and the effect of absorbing the influence of gravity model error on CHAMP and GRACE satellite orbits, using linear and periodical empirical acceleration models and the so-called "pseudo-stochastic pulses" model, were also analyzed.

Precise Orbit Determination for the FY-3C Satellite Using Onboard BDS and GPS Observations from 2013, 2015, and 2017

Using the FengYun-3C(FY-3C)onboard BeiDou Navigation Satellite System(BDS)and Global Positioning System(GPS)data from 2013 to 2017,this study investigates the performance and contribution of BDS to precise orbit determination(POD)for a low-Earth orbit(LEO).The overlap comparison result indicates that code bias correction of BDS can improve the POD accuracy by 12.4%.The multi-year averaged one-dimensional(1D)root mean square(RMS)of the overlapping orbit differences(OODs)for the GPS-only solution is 2.0,1.7,and 1.5 cm,respectively,during the 2013,2015,and 2017 periods.The 1D RMS for the BDS-only solution is 150.9,115.0,and 47.4 cm,respectively,during the 2013,2015,and 2017 periods,which is much worse than the GPS-only solution due to the regional system of BDS and the few BDS channels of the FY-3C receiver.For the BDS and GPS combined solution(also known as the GC combined solution),the averaged 1D RMS is 2.5,2.3,and 1.6 cm,respectively,in 2013,2015,and 2017,while the GC combined POD presents a significant accuracy improvement after the exclusion of geostationary Earth orbit(GEO)satellites.The main reason for the improvement seen after this exclusion is the unfavorable satellite tracking geometry and poor orbit accuracy of GEO satellites.The accuracy of BDS-only and GC combined solutions have gradually improved from 2013 to 2017,thanks to improvements in the accuracy of International GNSS Service(IGS)orbit and clock products in recent years,especially the availability of a high-frequency satellite clock product(30 s sampling interval)since 2015.Moreover,the GC POD(without GEO)was able to achieve slightly better accuracy than the GPS-only POD in 2017,indicating that the fusion of BDS and GPS observations can improve the accuracy of LEO POD.GC combined POD can significantly improve the reliability of LEO POD,simply due to system redundancy.An increased contribution of BDS to LEO POD can be expected with the launch of more BDS satellites and with further improvements in the accuracy of BDS satellite products in the near future.

Results and Analyses of BDS Precise Orbit Determination with the Enhancement of Fengyun-3C

Global navigation satellite system occultation sounder (GNOS) Fengyun-3C was launched successfully on September 23, 2013, which carried GPS/BDS receiver for the first time. This provides the convenience to study the enhancement results of low earth orbiter satellite (LEO) to BDS precise orbit determination (POD). First the data characteristic and code observation noise of GNOS are analyzed. Then the enhancement experiments in the case of global and regional ground observation stations layout are processed with four POD schemes: BDS single system, GPS/BDS double system, BDS single system with GNOS observations, GPS/BDS double system with GNOS observations. The precision of BDS orbits and clocks are compared via overlapping arcs. Results show that in the case of global station layout the along directional precision of GEO satellite has the biggest improvement, with the improvement percentage 60%. Then the precision of cross direction and the along direction of remaining satellites shows the second biggest improvement. The orbit precision of BDS-only POD in part of observation arcs some satellite even suffers a slight decline. The root mean square (RMS) of overlapping clock difference of visible arcs in GPS/BDS POD experiments improves by 0.1 ns level. As to the experiments of regional station layout with 7 ground stations, the orbit and clock overlapping precision and orbit predicting precision are analyzed. Results show that the predicting precision of BDS GEO satellites in the along direction improves by 85%. The remaining also has a substantial improvement, with the average percentage 21.7%. RMS of overlapping clock difference of visible arcs improves by 0.5 ns level.

星地SLR和星间链路的BDS-3卫星精密定轨

目前,BDS-3卫星上已全部搭载星间链路设备,可利用星间双向测量数据分离卫星相对钟差和相对几何距离解耦卫星轨道和钟差,再把星间距离作为观测量结合地面测量数据进行星地星间联合定轨。人卫激光测距(SLR)技术不受载波相位模糊度、钟差等因素的影响,数据处理过程相对于GNSS技术的数据处理更简单,可以作为一种独立于GNSS观测技术的测量手段。所有BDS卫星上已搭载激光角反射器,因此本文利用2020年1月北斗星间链路数据及少量SLR数据对11颗BDS-3卫星(MEO/IGSO/GEO)进行联合精密定轨试验。分析结果表明,基于SLR和星间链路的3类轨道类型的BDS-3卫星定轨精度相当,轨道精度径向为4.2 cm,三维精度为30.2 cm;卫星轨道预报12 h和24 h MEO卫星三维精度约40.0 cm,IGSO三维精度优于60.0 cm;GEO卫星三维精度约1.0 m。在精密定轨的同时解算地球自转参数(ERP),由于激光数据量少,极移精度约3.0 mas,日长变化精度为0.35 ms。利用少量SLR观测数据和星间链路测量数据联合可以实现导航卫星的高精度定轨,如果能够对BDS卫星加强激光观测,有助于提升轨道精度,为BDS自主可控空间基准参数解算提供参考。

GPS非差精密解算软件PLAOD及其性能分析

PLAOD(precise location and orbit determination)是西南交通大学自主研发的GPS非差精密定位定轨软件.该软件目前能够处理GPS观测数据,具有高精度定位、大气反演和低轨卫星轨道确定功能.本文在介绍PLAOD相关理论的基础之上对其性能进行了分析.利用多组GPS观测数据进行测试,通过与IGS(international GNSS service)等相关机构精密产品对比,PLAOD具备如下性能:静态定位精度可达毫米级;动态定位精度可达厘米级;静态对流层天顶延迟的估计精度通常优于1 cm,动态对流层天顶延迟的估计精度在2 cm以内;电离层天顶延迟估计结果与IGS的IONEX(ionosphere exchange)产品具有较高的吻合度;与JPL(jet propulsion laboratory)提供的简化动力学低轨卫星轨道相比,几何法确定轨道的准确度可达厘米级.

导航卫星姿态和光压模型研究进展

不同导航系统中卫星的形状、材料、轨道设计和姿态控制模式等都不相同,在进行多系统数据联合处理时,要获得高精度的卫星轨道,需要区别对待不同类型卫星的姿态模型和光压模型。作为导航卫星所受量级最大的非保守力,国内外许多研究是围绕光压模型的建立与精化等方面来开展,以便建立最合适的模型,从而获取更高的定轨精度。目前的研究表明,新的Galileo以及北斗卫星采用与之前不同的姿态控制模式,适用的光压模型也不同。总结了目前比较通用的导航卫星姿态模型,尤其是官方最新公布的北斗卫星的姿态模型,详细介绍了卫星光压模型研究进展和近几年来新发射卫星光压模型以及其先验模型的构建方法,并分析了各个模型的优缺点和适应性。通过对目前导航卫星姿态以及光压模型的分析,提出在更高精度的定轨任务中有待改进的问题,为导航卫星尤其是新发射导航卫星精密定轨中的光压和姿态模型的选择和建立提供参考。

空间监视雷达高精度实时目标定轨方法

地基空间监视雷达肩负着新目标发现、编目维持、空间事件监视等太空态势实时感知任务。在太空态势实时感知任务中,必须对空间目标进行实时高精度目标定轨。这类任务对实时性和精度要求都很高,传统方法难以满足任务需求。例如,传统的空间目标定轨算法为事后处理,为达到任务的精度要求需要积累多天多圈数据,不能满足此类任务的实时性要求。而传统的雷达目标跟踪滤波算法仅支持单弧段,其精度无法达到应用要求。为此,本文提出了基于高精度空间目标轨道模型和空间目标轨道预报误差协方差传播理论的不敏卡尔曼滤波(UKF)。该方法采用高精度空间目标轨道模型,支持多装备多弧段雷达观测数据,可以很好地解决多弧段滤波中断导致协方差不匹配的问题。根据仿真实验,跟踪三圈后,实时定轨的目标位置精度可以达到百米级,速度精度达到分米级。