Improved combustion stability of biogas at different CO_(2) concentrations using inhomogeneous partially premixed stratified flames

Biogas is a renewable and clean energy source that plays an important role in the current environment of lowcarbon transition.If high-content CO_(2) in biogas can be separated,transformed,and utilized,it not only realizes high-value utilization of biogas but also promotes carbon reduction in the biogas field.To improve the combustion stability of biogas,an inhomogeneous,partially premixed stratified(IPPS)combustion model was adopted in this study.The thermal flame structure and stability were investigated for a wide range of mixture inhomogeneities,turbulence levels,CO_(2) concentrations,air-to-fuel velocity ratios,and combustion energies in a concentric flow slot burner(CFSB).A fine-wire thermocouple is used to resolve the thermal flame structure.The flame size was reduced by increasing the CO_(2) concentration and the flames became lighter blue.The flame temperature also decreased with increase in CO_(2) concentration.Flame stability was reduced by increasing the CO_(2) concentration.However,at a certain level of mixture inhomogeneity,the concentration of CO_(2) in the IPPS mode did not affect the stability.Accordingly,the IPPS mode of combustion should be suitable for the combustion and stabilization of biogas.This should support the design of highly stabilized biogas turbulent flames independent of CO_(2) concentration.The data show that the lower stability conditions are partially due to the change in fuel combustion energy,which is characterized by the Wobbe index(WI).In addition,at a certain level of mixture inhomogeneity,the effect of the WI on flame stability becomes dominant.

Preparation of Poly(p-phenylene sulfide)/Carbon Composites with Enhanced Thermal Conductivity and Electrical Insulativity via Hybrids of Boron Nitride and Carbon Fillers

The present work enhanced the thermal conductivity of poly（p-phenylene sulfide）/expanded graphites and poly（p-phenylene sulfide）/carbon nanotubes, by incorporating composites with hexagonal boron nitride, which simultaneously succeeded in raising the electrical conductivity of the systems. A two-step mechanical processing method which includes rotating solid-state premixing and inner mixing was adopted to improve dispersion of the hybrids, contributing to the formation of an interspered thermal conductive network. Similar synergic effect in thermal conductivity enhancement was discovered in the hybrid systems regardless of the dimension difference between the two carbon fillers. Such is postulated to be the one satisfying advantage generated by the afore-mentioned network; the other is the insulativity of the hybrid systems given by the effective blockage of hexagonal boron nitride as an insulating material in our network.

液相色谱-质谱对预混饲料水解液中一碘酪氨酸与二碘酪氨酸的检测

A new LC-MS method has been established for determination of momoiodotyrosine(MIT) and diiodotyrosine(DIT) in the hydrolysate of premix feeds.Samples was hydrolyzed with 4.0 mol·L-1 NaOH for 16 h at 110 ℃,then the hydrolysate was cleaned up with a SPE cartridge and injected directly for LC-MS analysis.Chromatographic separation was performed on a 2.1 mm×150 mm,5 μm particle,C18 column with a mixture of acetonitrile and 0.1%(by volume) acetic acid as mobile phase at a flow rate of 0.2 mL· min-1.ESI+ mass spectrometry detection was run on SIR mode with m/z 308,262 for MIT,and m/z 434,388 for DIT.Quantification was carried out with external standard method.Validation data indicated the method was linear in the concentration ranges investigated with regression coefficients(R2) of more than 0.99.The limits of detection(LOD) were 8 μg·L-1 and limits of quantification(LOQ) were 30 μg·L-1.The recoveries were range of 93%-110% with relative standard deviations of 6.5%-13.2%.The method was sensitive,accurate,and was applied in the determination of MIT and DIT in real sample with satisfactory results.

A novel method for chemistry tabulation of strained premixed/stratified flames based on principal component analysis

The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger contribution ratios axe chosen as the tabu- lated scalars to build the look-up chemistry table. Prior tests show that strained premixed flame structure can be well reconstructed. To highlight the physical meanings of the tabu- lated scalars in stratified flames, a modified PCA method is developed, where the mixture fraction is used to replace one of the PCs with the highest correlation coefficient. The other two tabulated scalars are then modified with the Schmidt orthogonalization. The modified tabulated scalars not only have clear physical meanings, but also contain passive scalars. The PCA method has good commonality, and can be extended for building the thermo-chemistry table including strain rate effects when different fuels are used.

Quantitative measurements of one-dimensional OH absolute concentration profiles in a methane/air flat flame by bi-directional laser-induced fluorescence

The one-dimensional （1D） spatial distributions of OH absolute concentration in methane/air laminar premixed flat flame under different equivalence ratios at atmospheric pressure are investigated by using bi-directional laser-induced flu- orescence （LIF） detection scheme combined with the direct absorption spectroscopy. The effective peak absorption cross section and the average temperature at a height of 2 mm above the burner are obtained by exciting absorption on the Q1（8） rotational line in the A2∑＋ （Dt = 0） ←- X2∏ （v = 0） at 309.240 nm. The measured values are 1.86×10-15 cm2 and 1719 K, respectively. Spatial filtering and frequency filtering methods of reducing noise are used to deal with the experi- mental data, and the smoothing effects are also compared using the two methods. The spatial distribution regularities of OH concentration are obtained with the equivalence ratios ranging from 0.8 to 1.3. The spatial resolution of the measured result is 84μm. Finally, a comparison is made between the experimental result of this paper and other relevant study results.

Injection Strategy in Natural Gas–Diesel Dual-Fuel Premixed Charge Compression Ignition Combustion under Low Load Conditions

Dual-fuel premixed charge compression ignition (DF-PCCI) combustion has been proven to be a viable alternative to conventional diesel combustion in heavy-duty compression ignition engines due to its low nitrogen oxides (NOx) and particulate matter (PM) emissions. When natural gas (NG) is applied to a DF-PCCI engine, its low reactivity reduces the maximum pressure rise rate under high loads. However, the NG–diesel DF-PCCI engine suffers from low combustion efficiency under low loads. In this study, an injection strategy of fuel supply (NG and diesel) in a DF-PCCI engine was investigated in order to reduce both the fuel consumption and hydrocarbon (HC) and carbon monoxide (CO) emissions under low load conditions. A variation in the NG substitution and diesel start of energizing (SOE) was found to effectively control the formation of the fuel–air mixture. A double injection strategy of diesel was implemented to adjust the local reactivity of the mixture. Retardation of the diesel pilot SOE and a low fraction of the diesel pilot injection quantity were favorable for reducing the combustion loss. The introduction of exhaust gas recirculation (EGR) improved the fuel economy and reduced the NOx and PM emissions below Euro VI regulations by retarding the combustion phasing. The combination of an NG substitution of 40%, the double injection strategy of diesel, and a moderate EGR rate effectively improved the combustion efficiency and indicated efficiency, and reduced the HC and CO emissions under low load conditions.

Large Eddy Simulation of Gasoline-Air Mixture Explosion in Long Duct with Branch Structure

Gas explosion is a process involving complex hydrodynamics and chemical reactions.In order to investigate the interaction between the flame behavior and the dynamic overpressure resulting from the explosion of a premixed gasoline-air mixture in a confined space,a large eddy simulation(LES)strategy coupled with sub-grid combustion model has been implemented.The considered confined space consists of a long duct and four branches symmetrically distributed on both sides of the long duct.Comparisons between the simulated and experimental results have been considered with regard to the flame structure,flame speed and overpressure characteristics.It is shown that the explosion process can qualitatively be reproduced by the numerical simulation.Due to the branch structure,vortices are generated near the joint of the branch and long duct.Vortices rotate in opposite directions in the different branches.When the flame propagates into the branch,the flame front is influenced by the flow field structure and becomes more and more distorted.The overpressure displays a similar behavior in the two branches which have a different distance from the ignition point.It is finally shown that the overpressure change law can directly be put in relation with the shape of flame front.

Flow characterization and dilution effects of N_2 and CO_2 on premixed CH_4/air flames in a swirl-stabilized combustor

Numerically-aided experimental studies are conducted on a swirl-stabilized combustor to investigate the dilution effects on flame stability, flame structure, and pollutant emissions of premixed CH4/air flames. Our goal is to provide a systematic assessment on combustion characteristics in diluted regimes for its application to environmentally-friendly approaches such as biogas combustion and exhanst-gas recirculation technology. Two main diluting species, N2 and CO2, are tested at various dilution rates. The results obtained by means of optical diagnostics show that five main flame regimes can be observed for Nz-diluted flames by changing excess air and dilution rate. CO2-diluted flames follow the same pattern evolution except that all the domains are shifted to lower excess air. Both N2 and CO2 dilution affect the lean blow- out （LBO） limits negatively. This behavior can be counter-balanced by reactant preheating which is able to broaden the flammability domain of the diluted flames. Flame reactivity is degraded by increasing dilution rate. Meanwhile, flames are thickened in the presence of both diluting species. NOx emissions are significantly reduced with dilution and proved to be relevant to flame stability diagrams： slight augmentation in NOx emission profiles is related to transitional flame states where instability occurs. Although dilution results in increase in CO emissions at certain levels, optimal dilution rates can still be proposed to achieve an ideal compromise.

Large eddy simulation of turbulent premixed and stratified combustion using flame surface density model coupled with tabulation method

Large eddy simulations(LESs) are performed to investigate the Cambridge premixed and stratified flames, SwB1 and SwB5, respectively. The flame surface density(FSD) model incorporated with two different wrinkling factor models, i.e., the Muppala and Charlette2 wrinkling factor models, is used to describe combustion/turbulence interaction, and the flamelet generated manifolds(FGM) method is employed to determine major scalars. This coupled sub-grid scale(SGS) combustion model is named as the FSD-FGM model. The FGM method can provide the detailed species in the flame which cannot be obtained from the origin FSD model. The LES results show that the FSD-FGM model has the ability of describing flame propagation, especially for stratified flames. The Charlette2 wrinkling factor model performs better than the Muppala wrinkling factor model in predicting the flame surface area change by the turbulence.The combustion characteristics are analyzed in detail by the flame index and probability distributions of the equivalence ratio and the orientation angle, which confirms that for the investigated stratified flame, the dominant combustion modes in the upstream and downstream regions are the premixed mode and the back-supported mode, respectively.

Effects of 5% Biological Compound Premix on Milk Perform ance and Quality in Dairy Cow

This study was to investigate the effect of biological compound premix on the performance and milk quality in dairy cows. Twenty Holstein cows, with the similar age, parity, lactating month, gestation period, milk quantity and body weight, were randomly divided into two groups. The cows in two groups were fed with either common compound premix as control or 5% biological compound premix as treatment group. Two treatments contained same basal diet but different composi- tions of premix. The feeding experiment lasting 74 days displayed that daily milk quantity in treatment group was significantly higher than control group （P 〈 0.05 ）. The milk fat percentage was increased significantly in treatment group with the extended lactation time than control group （P 〈 0.05 ）. The milk protein and solids percentage were raised, but no significant difference was found between the two treatments （P 〉0.05 ）. The results indicated that 5% biological compound premix supplied in basal diet could facilitate to increase the milk performance and to ameliorate the milk quality of dairy cows.

Inerting characteristics of entrained atomized water on premixed methane-air flame

A combustion tube experiment platform was designed and used to study the inerting conditions and capacity of entrained atomized water on premixed methane–air flame. The structure of a laminar flame of premixed methane–air gas and the process of interaction between atomized water and flame was recorded, and the rules of combustion velocity, stability and strength rate of laminar flame were experimentally studied. The inerting process and mechanism was analyzed, and the characteristics of inerting premixed methane–air gas within explosion limits by atomized water were acquired. The research results show that: for the premixed methane–air gas with a concentration of 7%, the minimum inerting atomized water flux is 20.8 m L/(m2min); for the premixed methane–air gas with a concentration of 9%, the minimum inerting atomized water flux is 32.9 m L/(m2min); for the premixed methane–air gas with a concentration of 11%, the minimum inerting atomized water flux is 44.6 m L/(m2min). The research results are significant for extinguishing methane flame and inhibiting of methane explosion using atomized water.

The Effect of Swirl Intensity on the Flow Behavior and Combustion Characteristics of a Lean Propane-Air Flame

The effect of swirl number(Sn)on the flow behavior and combustion characteristics of a lean premixed propane FlameФ=0.5 in a swirl burner configuration was numerically verified in this study.Two-dimensional numerical simulations were performed using ANSYS-Fluent software.For turbulence closure,a standard K-εturbulence model was applied.The turbulence-chemistry interaction scheme was modeled using the Finite Rate-Eddy Dissipation hybrid model(FR/EDM)with a reduced three-step reaction mechanism.The P1 radiation model was used for the flame radiation inside the combustion chamber.Four different swirl numbers were selected(0,0.72,1.05,and 1.4)corresponding to different angles(0°,39°,50°,and 57.8°).The results show that the predicted model agrees very well with the experimental data,especially with respect to the axial and radial velocity and temperature profiles.An outer recirculation zone(ORZ)is present in the combustor corner at Sn=0 and an inner recirculation zone(IRZ)appears at the combustor centerline inlet at a critical Sn=0.72.When the Sn reaches an excessive value,the IRZ moves toward the premixing tube,leading to a flame flashback.The flame structure and its length are strongly affected by changes in the Sn as well as the formation of NOx and CO at the combustor exit.

Analytical Interaction of the Acoustic Wave and Turbulent Flame

A modified resonance model of a weakly turbulent flame in a high-frequency acoustic wave is derived analytically. Under the mechanism of Darrieus-Landau instability, the amplitude of flame wrinkles, which is as functions of the expansion coefficient and the perturbation wave number, increases greatly independent of the stationary＇ turbulence. The high perturbation wave number makes the resonance easier to be triggered but weakened with respect to the extra acoustic wave. In a closed burning chamber with the acoustic wave induced by the flame itself, the high perturbation wave number is to restrain the resonance for a realistic flame.

Experimental Investigation of Flame Structure and Combustion Limit During Premixed Methane/Air Jet Flame and Sidewall Interaction

The effects of inlet gas parameters and sloping sidewall angle on the flame structure and combustion limit with and without sidewall were experimentally investigated.Flame height and impact angle were obtained by chemiluminescence intensity analysis of CH*distribution.First,the combustion characteristics of flame with and without sidewall at different equivalence ratios were explored;then,the influence of Reynolds number and inlet gas temperature on flame structure and combustion limit of v-shaped flame with sidewall were analyzed,and the results with sidewall were compared with those without sidewall.Finally,the variation trend of flame parameters with different sloping sidewall angles was analyzed.The experimental results show that the existence of sidewall makes flame shape change from“M-shaped”to“inverted N-shaped”,and conical shape to trapezoidal shape.The inhibition effect of sidewall on flame stretching downstream is strengthened with the increase in Reynolds number;but as the temperature of the inlet gas increases,the inhibitory effect is obviously weakened.When sloping sidewall angle decreases from 90°to 55°at 5°intervals,flame height and impact angle of v-shaped flame reach the extreme value whenβ=80°.Compared with the case without sidewall,the range of v-shaped flame with sidewall has no obvious trend of broadening or shrinking when inlet gas temperature is increased;however,as sloping sidewall angle decreases,the range of the v-shaped flame shrinks obviously and flammability limit increases significantly.

A Lagrangian-based flame index for the transported probability density function method

We propose a new flame index for the transported probability density function(PDF) method. The flame index uses mixing flux projections of Lagrangian particles on mixture fraction and progress variable directions as the metrics to identify the combustion mode, with the Burke-Schumann solution as a reference. A priori validation of the flame index is conducted with a series of constructed turbulent partially premixed reactors. It indicates that the proposed flame index is able to identify the combustion mode based on the subgrid mixing information. The flame index is then applied the large eddy simulation/PDF datasets of turbulent partially premixed jet flames. Results show that the flame index separate different combustion modes and extinction correctly. The proposed flame index provides a promising tool to analyze and model the partially premixed flames adaptively.

RANS and LES Modeling of the GE10 Burner

The paper presents 1) the numerical results of RANS (Reynolds Averaging Navier-Stokes) simulations for two versions of the premixed combustion GE10 burners: the old one with non-premixed and modified one with swirled premixed pilot flames;and 2) the numerical results of joint RANS/LES (Large Eddy Simulation) modelling of the ONERA model burner and a simplified GE10 combustor. The original joint RANS/LES approach is based on using the Kolmogorov theory for modelling sub-grid turbulence and combustion intensity and using RANS numerical results for closure the LES model equations. The main conclusion is that developed joint RANS/LES approch is the efficient timesaving tool for simulations both the average and instantaneous fields of parameters in gas turbine and boiler burners with premixed combustion.

Optimization of Multigrain Premix for High Protein and Dietary Fibre Biscuits Using Response Surface Methodology (RSM)

In order to improve the nutritional quality of biscuits, a multigrain premix (MGP) was developed by using whole barley, sorghum, chickpea, pea and defatted soya flour, each at 20% level. The developed MGP had 26.28% protein, 10.13% insoluble dietary fiber and 7.38% soluble dietary fiber. The experiment was designed to optimise the MGP and wheat flour concentration for the development of multigrain biscuits with high protein, dietary fibre and to maximize the acceptability by the application of central composite rotatable design (CCRD) of Response Surface Methodology (RSM). The levels of incorporation of MGP and wheat flour were taken as variables whereas protein, soluble, insoluble fibers, biscuit dough hardness, breaking strength and overall acceptability (OAA) as responses. The optimum level of MGP and wheat flour obtained using numerical optimization was found to be 40 g and 60 g respectively. The biscuits prepared using these had 16.61% protein, 2.57% soluble fibre, and 6.67% insoluble fibre which is significantly (p ≤ 0.05) higher than control biscuit.

Determination of High Iodine Levels by ICP-OES after Separation from Excess Phosphate by Co-precipitation

For determination of iodine,dissolution or oxidation of an organic matrix by acid K-chlorate in dilute nitric acid to obtain non-volatile iodate immediately,is a method of choice.Optical emission spectroscopy is usually sensitive enough to control iodized table salt.Spectral interference by P upon the most sensitive I-emission line,e.g.in mineral feeds and marine algae,was overcome by co-precipitation of P with Al-or Fe hydroxide,leaving iodate(and also borate)in solution.After addition of Al or Fe nitrate or sulfate,ammonia was added to reach pH 8.8,and the resulting precipitate separated by cetrifugation and decantation.Al-hydroxide was more efficient,and its precipitation was facilitated by adding 10-30 mg of a natural clay to 5 mL sample.Correct results with materials from former ring tests were obtained down to 15 mg/kg by an ICP 20 years of age.Highlights:This method enables to use optical emission ICP for determination of high levels of iodine after a simple separation of phosphate from oxidizing acid digests,thus avoiding catalytic or spectrophotometric methods,or high blanks in an ICP-MS utilized for ambient iodine levels.

Evaluation of the Local Burning Velocity Using DNS Data of Turbulent Premixed Flames

The local burning velocity, which is based on the consumption rate of the unburned mixture, is one of the dominant parameters in turbulent premixed flames. In this study, the evaluating method of the local burning velocity was investigated using DNS data of turbulent premixed flames with different Lewis numbers. The local burning velocity was evaluated by integrating the chemical reaction rates along normal to the flame surface within three kinds of integration ranges that were defined as follows: the range which is defined by the half length of normal to the flame surface between its certain point and the other point crossing the flame surface (Range 1);the range which is defined by the reaction progress variable that the chemical reaction rate along normal to a planer flame surface takes a half of the maximum value (Range 2);the range which is defined by the length of normal to the flame surface between its certain point and the point which has the extreme value of the reaction progress variable (Range 3). As a result, Range 1 and Range 2 were affected by the flame shapes greatly, since the quantities of the integration ranges fluctuated widely dependent on the variations of turbulent premixed flames. Under the conditions of the turbulent combustion in this study, Range 3, which is hardly affected by a flame shape, is considered to be appropriate to the evaluation of the local burning velocity.