Experimental Investigation on the Pressure Propagation Mechanism of Tight Reservoirs

Low permeability tight sandstone reservoirs have a high filtrational resistance and a very low fluid flow rate.As a result,the propagation speed of the formation pressure is low and fluid flow behaves as a non-Darcy flow,which typically displays a highly non-linear behavior.In this paper,the characteristics and mechanism of pressure propagation in this kind of reservoir are revealed through a laboratory pressure propagation experiment and through data from an actual tight reservoir development.The main performance mechanism is as follows:A new pressure cage concept is proposed based on the pressure variation characteristics of the laboratory experiments.There are two methods of energy propagation in the actual water injection process:one is that energy is transmitted to the deep reservoir by the fluid flowing through the reservoir,and the other is that energy is transmitted by the elasticity of the reservoir.For one injection well model and one production well model,the pressure distribution curve between the injection and production wells,as calculated by the theoretical method,has three section types,and they show an oblique“S”shape with a straight middle section.However,the actual pressure distribution curve is nonlinear,with an obvious pressure advance at the front.After the injection pressure increases to a certain level,the curve shape is an oblique and reversed“S”shape.Based on the research,this paper explains the deep-seated reasons for the difference in pressure distribution and proposes that it is an effective way to develop low permeability tight reservoirs using the water injection supplement energy method.

Theoretical and numerical studies of crack initiation and propagation in rock masses under freezing pressure and far-field stress

Water-bearing rocks exposed to freezing temperature can be subjected to freezeethaw cycles leading tocrack initiation and propagation, which are the main causes of frost damage to rocks. Based on theGriffith theory of brittle fracture mechanics, the crack initiation criterion, propagation direction, andcrack length under freezing pressure and far-field stress are analyzed. Furthermore, a calculation methodis proposed for the stress intensity factor （SIF） of the crack tip under non-uniformly distributed freezingpressure. The formulae for the crack/fracture propagation direction and length of the wing crack underfreezing pressure are obtained, and the mechanism for coalescence of adjacent cracks is investigated.In addition, the necessary conditions for different coalescence modes of cracks are studied. Using thetopology theory, a new algorithm for frost crack propagation is proposed, which has the capability todefine the crack growth path and identify and update the cracked elements. A model that incorporatesmultiple cracks is built by ANSYS and then imported into FLAC3D. The SIFs are then calculated using aFISH procedure, and the growth path of the freezing cracks after several calculation steps is demonstratedusing the new algorithm. The proposed method can be applied to rocks containing fillings such asdetritus and slurry. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

A NEW MODEL FOR CALCULATING PROPAGATION PRESSURE AND INITIATION PRESSURE OF PIPELINES WITH A LOCAL DENT

An analytical model of a ring with six yield hinges and two deformable arc segments is presented for. the prediction of the buckle propagation pressure and initiation pressure in offshore pipelines. The configuration of a fully collapsed ring is considered as a real dumbbell shape with a line touch between two 'bells', instead of the dumbbell shape with a point touch of two diametrically opposite points. Calculations are performed assuming that the dominant effect on the plastic energy dissipation has the circumferential bending mode. For the linear strain-hardening materials it is found that theoretical predictions based on the above model for both propagation pressure and initiation nressure are in good agreement with experimental results of Kyriakides et al.

Modeling of fluid dynamics interacting with ductile fraction propagation in high pressure pipeline

This paper presents a computational model for the fluid dynamics in a fractured ductile pipe under high pressure. The pressure profile in front of the crack tip, which is the driving source of crack propagation, is computed using a nonlinear wave equation. The solution is coupled with a one dimensional choked flow analysis behind the crack. The simulation utilizes a high order optimized prefactored compact-finite volume method in space, and low dispersion and dissipation Runge-Kutta in time. As the pipe fractures the rapid depressurization take place inside the pipe and the propagation of the crack-induced waves strongly influences the outflow dynamics. Consistent with the experimental observation, the model predicts the expansion wave inside the pipe, and the reflection and outflow of the wave. The model also helps characterize the propagation of the crack dynamics and fluid flows around the tip of the crack.

Influence of Plasma Pressure Fluctuation on RF Wave Propagation

Pressure fluctuations in the plasma sheath from spacecraft reentry affect radiofrequency（RF） wave propagation.The influence of these fluctuations on wave propagation and wave properties is studied using methods derived by synthesizing the compressible turbulent flow theory,plasma theory,and electromagnetic wave theory.We study these influences on wave propagation at GPS and Ka frequencies during typical reentry by adopting stratified modeling.We analyzed the variations in reflection and transmission properties induced by pressure fluctuations.Our results show that,at the GPS frequency,if the waves are not totally reflected then the pressure fluctuations can remarkably affect reflection,transmission,and absorption properties.In extreme situations,the fluctuations can even cause blackout.At the Ka frequency,the influences are obvious when the waves are not totally transmitted.The influences are more pronounced at the GPS frequency than at the Ka frequency.This suggests that the latter can mitigate blackout by reducing both the reflection and the absorption of waves,as well as the influences of plasma fluctuations on wave propagation.Given that communication links with the reentry vehicles are susceptible to plasma pressure fluctuations,the influences on link budgets should be taken into consideration.

Nonlinear Contact Between Inner Walls of Deep Sea Pipelines in Buckling Process

In order to study buckling propagation mechanism in deep sea pipelines, the contact between pipeline's inner walls in buckling process was studied. A two-dimensional ring model was used to represent the pipeline and a nonlinear spring model was adopted to simulate the contact between inner walls. Based on the elastoplastic constitutive relationship and the principle of virtual work theory, the coupling effect of pipeline's nonlinear large deformation and wall contact was included in the theoretical analysis with the aid of MATLAB, and the application scope of the theoretical model was also discussed. The calculated results show that during the loading process, the change in external pressure is closely related to the distribution of section stress, and once the walls are contacting each other, the external pressure increases and then remains stable after it reaches a specific value. Without fracture, the pipeline section will stop showing deformation. The results of theoretical calculations agree well with those of numerical simulations. Finally, in order to ensure reliability and accuracy of the theoretical results, the collapse pressure and propagation pressure were both verified by numerical simulations and experiments. Therefore, the theoretical model can be used to analyze pipeline's buckling deformation and contact between pipeline's inner walls, which forms the basis for further research on three-dimensional buckling propagation.

Experiment study on the propagation laws of gas and coal dust explosion in coal mine

The experiment of gas and coal dust explosion propagation in a single lanewaywas carried out in a large experimental roadway that is nearly the same with actual environmentand geometry conditions.In the experiment,the time when the gas and coal dustexplosion flame reaches test points has a logarithmic function relation with the test pointdistances.The explosion flame propagation velocity rises rapidly in the foreside of the coaldust segment and comes down after that.The length of the flame area is about 2 timesthat of the original coal dust accumulation area.Shock wave pressure comes down to therock bottom in the coal dust segment,then reaches the maximum peak rapidly and comesdown.The theoretical basis of the research and assemble of across or explosion is suppliedby the experiment conclusion.Compared with gas explosion,the force and destructiondegree of gas and coal dust explosion is much larger.

Fluid dynamic modeling of junctions in internal combustion engine inlet and exhaust systems

The modeling of inlet and exhaust systems of internal combustion engine is very important in order to evaluate the engine performance.This paper presents new pressure losses models which can be included in a one dimensional engine simulation code.In a first part,a CFD analysis is made in order to show the importance of the density in the modeling approach.Then,the CFD code is used,as a numerical test bench,for the pressure losses models development.These coefficients depend on the geometrical characteristics of the junction and an experimental validation is made with the use of a shock tube test bench.All the models are then included in the engine simulation code of the laboratory.The numerical calculation of unsteady compressible flow,in each pipe of the inlet and exhaust systems,is made and the calculated engine torque is compared with experimental measurements.

Effect of inlet-valve structures on thrust of airbreathing pulse detonation engines

Experimental studies were conducted in order to improve the understanding of the thrust generation and the pressure/flame reverse propagation of the air-breathing pulse detonation engines(APDEs)with self-designed inlets and valves structures.The present experimental research utilized a gasoline/air APDE(with 68 mm inner-diameter,2050 mm length and maximum operating frequency not less than 40 Hz which was as a benchmark structure)at different operating frequencies,with freestream air inflow of 1.1 atm and 0℃.The theoretical equivalence ratio of gasoline/air was 1.Two kinds of inlets with centerbody or without were considered and combined with two kinds of self-designed valves(the elastic-valve and the convergent aero-valve)specially designed for comparative experiments.During the test,the inflow parameters,the pressure along the longitudinal direction inside the engine and the thrust force were measured for the APDE operating characteristic analysis,including the detonation combustion,the aerodynamic drag,the pressure/flame reverse propagation and the thrust generation.The research results indicate that:The inlet centerbody does not increase drag but plays a positive effect on airflow stability and operation matching.The elastic-valve and the convergent aero-valve,though increase the inlet aerodynamic drag,have obvious effects on suppressing the detonation wave and pressure forward propagation,resulting in effective thrust increase.Effects of the convergent aero-valve are the best when the flow choked,while the effects of elastic-valve are better and continuously stable in a wider range of frequency.The wmaximum nondimensional thrust increases with the elastic-valve is reached about 1.12 at the frequency of 8-9 Hz,and about 0.97 with the convergent aero-valve at the frequency of 7 Hz.The maximum fuel specific impulse is 2514.6 s when using the convergent aerovalve.And this study provides technical reserve for the APDE optimization design.