Comparative assessment of the frying efficiency of standard and low linolenic rapeseed oils: Principal Component Analysis (PCA)

In this research,the performance of regular rapeseed oil(RSO)and modified low-linolenic rapeseed oil(LLRO)during frying was assessed using a frying procedure that commonly found in fast-food restaurants.Key physicochemical attributes of these oils were investigated.RSO and LLRO differed for initial linolenic acid(12.21%vs.2.59%),linoleic acid(19.15%vs.24.73%).After 6 successive days frying period of French fries,the ratio of linoleic acid to palmitic acid dropped by 54.49%in RSO,higher than that in LLRO(51.54%).The increment in total oxidation value for LLRO(40.46 unit)was observed to be significantly lower than those of RSO(42.58 unit).The changes in carbonyl group value and iodine value throughout the frying trial were also lower in LLRO compared to RSO.The formation rate in total polar compounds for LLRO was 1.08%per frying day,lower than that of RSO(1.31%).In addition,the formation in color component and degradation in tocopherols were proportional to the frying time for two frying oils.Besides,a longer induction period was also observed in LLRO(8.87 h)compared to RSO(7.68 h)after frying period.Overall,LLRO exhibited the better frying stability,which was confirmed by principal component analysis(PCA).

Using deep neural networks coupled with principal component analysis for ore production forecasting at open-pit mines

Ore production is usually affected by multiple influencing inputs at open-pit mines.Nevertheless,the complex nonlinear relationships between these inputs and ore production remain unclear.This becomes even more challenging when training data(e.g.truck haulage information and weather conditions)are massive.In machine learning(ML)algorithms,deep neural network(DNN)is a superior method for processing nonlinear and massive data by adjusting the amount of neurons and hidden layers.This study adopted DNN to forecast ore production using truck haulage information and weather conditions at open-pit mines as training data.Before the prediction models were built,principal component analysis(PCA)was employed to reduce the data dimensionality and eliminate the multicollinearity among highly correlated input variables.To verify the superiority of DNN,three ANNs containing only one hidden layer and six traditional ML models were established as benchmark models.The DNN model with multiple hidden layers performed better than the ANN models with a single hidden layer.The DNN model outperformed the extensively applied benchmark models in predicting ore production.This can provide engineers and researchers with an accurate method to forecast ore production,which helps make sound budgetary decisions and mine planning at open-pit mines.

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

A Modified Principal Component Analysis Method for Honeycomb Sandwich Panel Debonding Recognition Based on Distributed Optical Fiber Sensing Signals

The safety and integrity requirements of aerospace composite structures necessitate real-time health monitoring throughout their service life.To this end,distributed optical fiber sensors utilizing back Rayleigh scattering have been extensively deployed in structural health monitoring due to their advantages,such as lightweight and ease of embedding.However,identifying the precise location of damage from the optical fiber signals remains a critical challenge.In this paper,a novel approach which namely Modified Sliding Window Principal Component Analysis(MSWPCA)was proposed to facilitate automatic damage identification and localization via distributed optical fiber sensors.The proposed method is able to extract signal characteristics interfered by measurement noise to improve the accuracy of damage detection.Specifically,we applied the MSWPCA method to monitor and analyze the debonding propagation process in honeycomb sandwich panel structures.Our findings demonstrate that the training model exhibits high precision in detecting the location and size of honeycomb debonding,thereby facilitating reliable and efficient online assessment of the structural health state.

Robust Principal Component Analysis Integrating Sparse and Low-Rank Priors

Principal Component Analysis (PCA) is a widely used technique for data analysis and dimensionality reduction, but its sensitivity to feature scale and outliers limits its applicability. Robust Principal Component Analysis (RPCA) addresses these limitations by decomposing data into a low-rank matrix capturing the underlying structure and a sparse matrix identifying outliers, enhancing robustness against noise and outliers. This paper introduces a novel RPCA variant, Robust PCA Integrating Sparse and Low-rank Priors (RPCA-SL). Each prior targets a specific aspect of the data’s underlying structure and their combination allows for a more nuanced and accurate separation of the main data components from outliers and noise. Then RPCA-SL is solved by employing a proximal gradient algorithm for improved anomaly detection and data decomposition. Experimental results on simulation and real data demonstrate significant advancements.

Comparative Analysis of Differences among Northern,Jiangnan,and Lingnan Classical Private Gardens Using Principal Component Cluster Method

This paper investigates the design essence of Chinese classical private gardens,integrating their design elements and fundamental principles.It systematically analyzes the unique characteristics and differences among classical private gardens in the Northern,Jiangnan,and Lingnan regions.The study examines nine classical private gardens from Northern China,Jiangnan,and Lingnan by utilizing the advanced tool of principal component cluster analysis.Based on literature analysis and field research,273 variables were selected for principal component analysis,from which four components with higher contribution rates were chosen for further study.Subsequently,we employed clustering analysis techniques to compare the differences among the three types of gardens.The results reveal that the first principal component effectively highlights the differences between Jiangnan and Lingnan private gardens.The second principal component serves as the key to defining the types of Northern private gardens and distinguishing them from the other two types,and the third principal component indicates that Lingnan private gardens can be categorized into two distinct types as well.

Predicting the alloying element yield in a ladle furnace using principal component analysis and deep neural network

The composition control of molten steel is one of the main functions in the ladle furnace(LF)refining process.In this study,a feasible model was established to predict the alloying element yield using principal component analysis(PCA)and deep neural network(DNN).The PCA was used to eliminate collinearity and reduce the dimension of the input variables,and then the data processed by PCA were used to establish the DNN model.The prediction hit ratios for the Si element yield in the error ranges of±1%,±3%,and±5%are 54.0%,93.8%,and98.8%,respectively,whereas those of the Mn element yield in the error ranges of±1%,±2%,and±3%are 77.0%,96.3%,and 99.5%,respectively,in the PCA-DNN model.The results demonstrate that the PCA-DNN model performs better than the known models,such as the reference heat method,multiple linear regression,modified backpropagation,and DNN model.Meanwhile,the accurate prediction of the alloying element yield can greatly contribute to realizing a“narrow window”control of composition in molten steel.The construction of the prediction model for the element yield can also provide a reference for the development of an alloying control model in LF intelligent refining in the modern iron and steel industry.

A blast furnace fault monitoring algorithm with low false alarm rate:Ensemble of greedy dynamic principal component analysis-Gaussian mixture model

The large blast furnace is essential equipment in the process of iron and steel manufacturing. Due to the complex operation process and frequent fluctuations of variables, conventional monitoring methods often bring false alarms. To address the above problem, an ensemble of greedy dynamic principal component analysis-Gaussian mixture model(EGDPCA-GMM) is proposed in this paper. First, PCA-GMM is introduced to deal with the collinearity and the non-Gaussian distribution of blast furnace data.Second, in order to explain the dynamics of data, the greedy algorithm is used to determine the extended variables and their corresponding time lags, so as to avoid introducing unnecessary noise. Then the bagging ensemble is adopted to cooperate with greedy extension to eliminate the randomness brought by the greedy algorithm and further reduce the false alarm rate(FAR) of monitoring results. Finally, the algorithm is applied to the blast furnace of a large iron and steel group in South China to verify performance.Compared with the basic algorithms, the proposed method achieves lowest FAR, while keeping missed alarm rate(MAR) remain stable.

TOC estimation from logging data using principal component analysis

Total organic carbon(TOC)content is one of the most important parameters for characterizing the quality of source rocks and assessing the hydrocarbon-generating potential of shales.The Lucaogou Formation shale reservoirs in the Jimusaer Sag,Junggar Basin,NW China,is characterized by extremely complex lithology and a wide variety of mineral compositions with source rocks mainly consisting of carbonaceous mudstone and dolomitic mudstone.The logging responses of organic matter in the shale reservoirs is quite different from those in conventional reservoirs.Analyses show that the traditional△logR method is not suitable for evaluating the TOC content in the study area.Analysis of the sensitivity characteristics of TOC content to well logs reveals that the TOC content has good correlation with the separation degree of porosity logs.After a dimension reduction processing by the principal component analysis technology,the principal components are determined through correlation analysis of porosity logs.The results show that the TOC values obtained by the new method are in good agreement with that measured by core analysis.The average absolute error of the new method is only 0.555,much less when compared with 1.222 of using traditional△logR method.The proposed method can be used to produce more accurate TOC estimates,thus providing a reliable basis for source rock mapping.

Mantle sources of Cenozoic volcanoes around the South China Sea revealed by geochemical and isotopic data using the principal component analysis

Principal component analysis(PCA)was employed to determine the implications of geochemical and isotopic data from Cenozoic volcanic activities in the Southeast Asian region,including China(South China Sea(SCS),Hainan Island,Fujian-Zhejiang coast,Taiwan Island),and parts of Vietnam and Thailand.We analyzed 15 trace element indicators and 5 isotopic indicators for 623 volcanic rock samples collected from the study region.Two principal components(PCs)were extracted by PCA based on the trace elements and Sr-Nd-Pb isotopic ratios,which probably indicate an enriched oceanic island basalt-type mantle plume and a depleted mid-ocean ridge basalt-type spreading ridge.The results show that the influence of the Hainan mantle plume on younger volcanic activities(<13 Ma)is stronger than that on older ones(>13 Ma)at the same location in the Southeast Asian region.PCA was employed to verify the mantle-plume-ridge interaction model of volcanic activities beneath the expansion center of SCS and refute the hypothesis that the tension of SCS is triggered by the Hainan plume.This study reveals the efficiency and applicability of PCA in discussing mantle sources of volcanic activities;thus,PCA is a suitable research method for analyzing geochemical data.

Integrated classification method of tight sandstone reservoir based on principal component analysise simulated annealing genetic algorithmefuzzy cluster means

In this research,an integrated classification method based on principal component analysis-simulated annealing genetic algorithm-fuzzy cluster means(PCA-SAGA-FCM)was proposed for the unsupervised classification of tight sandstone reservoirs which lack the prior information and core experiments.A variety of evaluation parameters were selected,including lithology characteristic parameters,poro-permeability quality characteristic parameters,engineering quality characteristic parameters,and pore structure characteristic parameters.The PCA was used to reduce the dimension of the evaluation pa-rameters,and the low-dimensional data was used as input.The unsupervised reservoir classification of tight sandstone reservoir was carried out by the SAGA-FCM,the characteristics of reservoir at different categories were analyzed and compared with the lithological profiles.The analysis results of numerical simulation and actual logging data show that:1)compared with FCM algorithm,SAGA-FCM has stronger stability and higher accuracy;2)the proposed method can cluster the reservoir flexibly and effectively according to the degree of membership;3)the results of reservoir integrated classification match well with the lithologic profle,which demonstrates the reliability of the classification method.

Wireless Sensor Network-based Detection of Poisonous Gases Using Principal Component Analysis

This work utilizes a statistical approach of Principal Component Ana-lysis(PCA)towards the detection of Methane(CH_(4))-Carbon Monoxide(CO)Poi-soning occurring in coal mines,forestfires,drainage systems etc.where the CH_(4) and CO emissions are very high in closed buildings or confined spaces during oxi-dation processes.Both methane and carbon monoxide are highly toxic,colorless and odorless gases.Both of the gases have their own toxic levels to be detected.But during their combined presence,the toxicity of the either one goes unidentified may be due to their low levels which may lead to an explosion.By using PCA,the correlation of CO and CH_(4) data is carried out and by identifying the areas of high correlation(along the principal component axis)the explosion suppression action can be triggered earlier thus avoiding adverse effects of massive explosions.Wire-less Sensor Network is deployed and simulations are carried with heterogeneous sensors(Carbon Monoxide and Methane sensors)in NS-2 Mannasim framework.The rise in the value of CO even when CH_(4) is below the toxic level may become hazardous to the people around.Thus our proposed methodology will detect the combined presence of both the gases(CH_(4) and CO)and provide an early warning in order to avoid any human losses or toxic effects.

Lung Cancer Prediction from Elvira Biomedical Dataset Using Ensemble Classifier with Principal Component Analysis

Machine learning algorithms (MLs) can potentially improve disease diagnostics, leading to early detection and treatment of these diseases. As a malignant tumor whose primary focus is located in the bronchial mucosal epithelium, lung cancer has the highest mortality and morbidity among cancer types, threatening health and life of patients suffering from the disease. Machine learning algorithms such as Random Forest (RF), Support Vector Machine (SVM), K-Nearest Neighbor (KNN) and Naïve Bayes (NB) have been used for lung cancer prediction. However they still face challenges such as high dimensionality of the feature space, over-fitting, high computational complexity, noise and missing data, low accuracies, low precision and high error rates. Ensemble learning, which combines classifiers, may be helpful to boost prediction on new data. However, current ensemble ML techniques rarely consider comprehensive evaluation metrics to evaluate the performance of individual classifiers. The main purpose of this study was to develop an ensemble classifier that improves lung cancer prediction. An ensemble machine learning algorithm is developed based on RF, SVM, NB, and KNN. Feature selection is done based on Principal Component Analysis (PCA) and Analysis of Variance (ANOVA). This algorithm is then executed on lung cancer data and evaluated using execution time, true positives (TP), true negatives (TN), false positives (FP), false negatives (FN), false positive rate (FPR), recall (R), precision (P) and F-measure (FM). Experimental results show that the proposed ensemble classifier has the best classification of 0.9825% with the lowest error rate of 0.0193. This is followed by SVM in which the probability of having the best classification is 0.9652% at an error rate of 0.0206. On the other hand, NB had the worst performance of 0.8475% classification at 0.0738 error rate.

Application of Principal Component Analysis as Properties and Sensory Assessment Tool for Legume Milk Chocolates

Principal component analysis (PCA) was employed to examine the effect of nutritional and bioactive compounds of legume milk chocolate as well as the sensory to document the extend of variations and their significance with plant sources. PCA identified eight significant principle components, that reduce the size of the variables into one principal component in physiochemical analysis interpreting 73.5% of the total variability with/and 78.6% of total variability explained in sensory evaluation. Score plot indicates that Double Bean milk chocolate in-corporated with MOL and CML in nutritional profile have high positive correlations. In nutritional evaluation, carbohydrates and fat content shows negative/minimal correlations whereas no negative correlations were found in sensory evaluation which implies every sensorial variable had high correlation with each other.

Degradation of malathion by Pseudomonas during activated sludge treatment system using principal component analysis (PCA)

Popular descriptive multivariate statistical method currently employed is the principal component analyses （PCA） method. PCA is used to develop linear combinations that successively maximize the total variance of a sample where there is no known group structure. This study aimed at demonstrating the performance evaluation of pilot activated sludge treatment system by inoculating a strain of Pseudomonas capable of degrading malathion which was isolated by enrichment technique. An intensive analytical program was followed for evaluating the efficiency of biosimulator by maintaining the dissolved oxygen （DO） concentration at 4.0 mg/L. Analyses by high performance liquid chromatographic technique revealed that 90% of malathion removal was achieved within 29 h of treatment whereas COD got reduced considerably during the treatment process and mean removal efficiency was found to be 78%. The mean pH values increased gradually during the treatment process ranging from 7.36-8.54. Similarly the mean ammonia-nitrogen （NH3-N） values were found to be fluctuating between 19.425-28.488 mg/L, mean nitrite-nitrogen （NO3-N） ranging between 1.301- 2.940 mg/L and mean nitrate-nitrogen （NO3-N） ranging between 0.0071-0.0711 mg/L. The study revealed that inoculation of bacterial culture under laboratory conditions could be used in bioremediation of environmental pollution caused by xenobiotics. The PCA analyses showed that pH, COD, organic load and total malathion concentration were highly correlated and emerged as the variables controlling the first component, whereas dissolved oxygen, NO3-N and NH3-N governed the second component. The third component repeated the trend exhibited by the first two components.

Application of Principal Component Analysis(PCA)to the Evaluation and Screening of Multiactivity Fungi

Continued innovation in screening methodologies remains important for the discovery of high-quality multiactive fungi,which have been of great significance to the development of new drugs.Mangrove-derived fungi,which are well recognized as prolific sources of natural products,are worth sustained attention and further study.In this study,118 fungi,which mainly included Aspergillus spp.(34.62%)and Penicillium spp.(15.38%),were isolated from the mangrove ecosystem of the Maowei Sea,and 83.1%of the cultured fungi showed at least one bioactivity in four antibacterial and three antioxidant assays.To accurately evaluate the fungal bioactivities,the fungi with multiple bioactivities were successfully evaluated and screened by principal component analysis(PCA),and this analysis provided a dataset for comparing and selecting multibioactive fungi.Among the 118 mangrove-derived fungi tested in this study,Aspergillus spp.showed the best comprehensive activity.Fungi such as A.clavatonanicus,A.flavipes and A.citrinoterreus,which exhibited high comprehensive bioactivity as determined by the PCA,have great potential in the exploitation of natural products and the development of new drugs.This study demonstrated the first use of PCA as a time-saving,scientific method with a strong ability to evaluate and screen multiactive fungi,which indicated that this method can affect the discovery and development of new drugs.

Tool Health Condition Recognition Method for High Speed Milling of Titanium Alloy Based on Principal Component Analysis (PCA) and Long Short Term Memory (LSTM)

The healthy condition of the milling tool has a very high impact on the machining quality of the titanium components.Therefore,it is important to recognize the healthy condition of the tool and replace the damaged cutter at the right time.In order to recognize the health condition of the milling cutter,a method based on the long short term memory(LSTM)was proposed to recognize tool health state in this paper.The various signals collected in the tool wear experiments were analyzed by time-domain statistics,and then the extracted data were generated by principal component analysis(PCA)method.The preprocessed data extracted by PCA is transmitted to the LSTM model for recognition.Compared with back propagation neural network(BPNN)and support vector machine(SVM),the proposed method can effectively utilize the time-domain regulation in the data to achieve higher recognition speed and accuracy.

Phase Analysis and Identification Method for Multiphase Batch Processes with Partitioning Multi-way Principal Component Analysis (MPCA) Model

Multi-way principal component analysis (MPCA) is the most widely utilized multivariate statistical process control method for batch processes. Previous research on MPCA has commonly agreed that it is not a suitable method for multiphase batch process analysis. In this paper, abundant phase information is revealed by way of partitioning MPCA model, and a new phase identification method based on global dynamic information is proposed. The application to injection molding shows that it is a feasible and effective method for multiphase batch process knowledge understanding, phase division and process monitoring.

Principal Component Analysis （PCA） on Multivariate Data of Lard Analysis in Cooking Oil

Discrimination of fatty acids （FAs） of lard in used cooking oil is important in halal determination. The aim of this study was to find the information related to the changes FAs of lard when frying in cooking oil. Quantitative analysis of FAs composition extracted from a series of experiments which involving frying cooking oil spiked with lard at three different parameters; concentration of spiked lard, heating temperatures and period of frying. The samples were analyzed using Gas Chromatography （GC） and Principal Components Analysis （PCA） technique. Multivariate data from chromatograms of FAs were standardized and computed using Unscrambler X10 into covariance matrix and eigenvectors correspond to Principal Components （PCs）. Results have shown that the first and second PCs contribute to the FAs mapping which can be visualized by scores and loading plots to discriminate FAs of lard in used cooking oil

Correlation and Principal Component Analysis on Main Agronomic Traits of New Waxy Corn Varieties

[Objective] This study was conducted to provide certain theoretical reference for the comprehensive evaluation and breeding of new fresh waxy corn vari- eties. [Method] With 5 good fresh waxy corn varieties as experimental materials, correlation analysis and principal component anatysis were performed on 13 agronomic traits, i.e., plant height, ear position, ear weight, ear diameter, axis diameter, ear length, bald tip length, ear row number, number of grains per row, 100-kernel weight, fresh ear yield, tassel length, and tassel branch number. [Result] The principal component analysis performed to the 13 agronomic traits showed that the first three principal components, i.e., the fresh ear yield factors, the tassel factors and the bald top factors, had an accumulative contribution rate over 87.2767%, and could basically represent the genetic information represented by the 13 traits. The first principal component is the main index for the selection and evaluation of good corn varieties which should have large ear, large ear diameter but small axis diameter, i.e., longer grains, larger number of grains per ear, higher, 100-grain weight and higher plant height. As to the second principal component, the plants of fresh corn varieties are best to have longer tassel and not too many branches, and under the premise of ensuring enough pollen for the female spike, the varieties with fewer tassel branches shoud be selected as far as possible. From the point of the third principal component, bald tip length affects the marketing quality of fresh corn, and during fariety evaluation and breeding, the bald top length should be control at the Iowest standard. [Conclusion] The fresh ear yield of corn is in close positive correlation with ear weight, 100-grain weight, ear diameter, number of grains per row and ear length, and plant height also affects fresh ear yield.