Experimental and numerical study regarding H-steel all-bolted connection steel frame with composite wall boards

H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.

Effect of Low pH on Forming Process of Desulfurization Gypsum Composite Boards Strengthened by Melamine-formaldehyde Resin

Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.

Protective benefit of folded linear HDPE board sand fences along the Golmud-Korla Railway,China:Field observation and wind tunnel study

The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.

Women on Boards of Directors

This research aims to measure the current gender representation in membership of boards of directors,and to study the factors affecting the presence of women on boards.The results of the study will support the decision makers and policy makers at all levels by providing knowledge that contributes to bridging the current gap in participation of women boards.The methodology used in this research is the descriptive analytical approach,which relies on quantitative methods in the process of collecting and analyzing data.This study represents the boards of directors in the three sectors(public,private,and non-profit)in the Kingdom of Saudi Arabia,The study sample contained 350 targets,where a random sample of 150 people in the public sector,100 people in the private sector,and 100 people in the non-profit sector were selected.The research result found that the majority of the responses believe that the lack of experience and training,and social factors,are the most impact areas of explaining the reasons for the existence of a gap in women’s membership in boards of directors in the three sectors.And the most important reasons for the existence of a gender gap in board membership are:there is no statutory minimum percentage for women’s representation on boards of directors,and scarcity of female competencies in general,and the lack of women occupying leadership positions.

Development and Characterization of Particle Boards Based on Sorghum Husk

This study tackles current environmental challenges by developing innovative and eco-friendly particle boards utilizing sorghum husk, combined with recycled expanded polystyrene (EPS). This dual eco-responsible approach valorizes sorghum husk, often deemed agricultural waste, and repurposes EPS, a plastic waste, thus contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene within a solvent to create a binder, which is then mixed with sorghum husk and cold-pressed into composite boards. The study explores the impact of two particle sizes (fine and coarse) and two different concentrations of the recycled EPS binder. Results demonstrate significant variations in the boards’ mechanical properties, displaying a range of Modulus of Rupture (MOR) from 0.84 MPa to 3.85 MPa, and Modulus of Elasticity (MOE) spanning from 658.13 MPa to 1313.25 MPa, influenced by the binder concentration and particle size. These characteristics suggest that the boards can be effectively used in various construction applications, including interior decoration, false ceilings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only exemplifies the valorization of plastic and agricultural wastes but also offers a practical, localized solution to global climate change challenges by promoting sustainable construction materials.

Sandwich structured ultra-strong-heat-shielding aerogel/copper composite insulation board for safe lithium-ion batteries modules

The fire hazard of lithium-ion batteries(LIBs)modules is extremely serious due to their high capacity.Moreover,once a battery catches fire,it can easily result in a fire of the entire LIBs modules.In this work,a sandwich structure composite thermal insulation(STI)board(copper//silica dioxide aerogel//copper)with the advantages of low thermal conductivity(0.031 W m-1K-1),low surface radiation emissivity(0.1)and good thermal convection inhibition effect has been designed.The thermal runaway(TR)occurrence time of adjacent LIBs increases from 1384 s to more than 6 h+due to the protection of STI board.No TR propagation occurs within LIBs modules with protect of a STI board when a battery catches fire.The ultra-strong-heat-shielding mechanism of STI board has been revealed.The TR propagation of LIBs modules has been insulated effectively by STI board through reducing the heat transfer of convection,conduction and radiation.The air flow rate between the heater and LIBs and radiant heat absorbed by LIBs decrease by 63.5%and 35.1%with protection of STI board,respectively.A high temperature difference inside the STI board is also formed.This work provides direction for the designing of safe thermal insulation board for LIBs modules.

Experimental study of polyurea-coated fiber-reinforced cement boards under gas explosions

Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea with different formulations were processed, and a series of experiments were carried out on the specimens with gas explosion devices. The results showed that the conventional mechanical properties of different types of polyureas had their own advantages. Based on the gas explosion overpressure criterion, the blast resistances of reinforced plates were quantitatively evaluated,and the best polyurea was selected to guide the formulation design. The three typical failure modes of polyurea-reinforced FRCBs were flexural, shear, and flexural-shear failure. Dynamic thermodynamics and shock wave spectral analysis revealed that the polyurea did not undergo a glass transition in the gas explosion tests but retained its elastic properties, allowing it to effectively wrap the fragments formed by the brittle substrates.

Editorial board publication strategy and acceptance rates in Turkish national journals

Purpose: This study takes advantage of newly released journal metrics to investigate whether local journals with more qualified boards have lower acceptance rates, based on data from 219 Turkish national journals and 2,367 editorial board members.Design/methodology/approach: This study argues that journal editors can signal their scholarly quality by publishing in reputable journals. Conversely, editors publishing inside articles in affiliated national journals would send negative signals. The research predicts that high(low) quality editorial boards will conduct more(less) selective evaluation and their journals will have lower(higher) acceptance rates. Based on the publication strategy of editors, four measures of board quality are defined: Number of board inside publications per editor(INSIDER), number of board Social Sciences Citation Index publications per editor(SSCI), inside-to-SSCI article ratio(ISRA), and board citation per editor(CITATION). Predictions are tested by correlation and regression analysis.Findings: Low-quality board proxies(INSIDER, ISRA) are positively, and high-quality board proxies(SSCI, CITATION) are negatively associated with acceptance rates. Further, we find that receiving a larger number of submissions, greater women representation on boards, and Web of Science and Scopus(WOSS) coverage are associated with lower acceptance rates. Acceptance rates for journals range from 12% to 91%, with an average of 54% and a median of 53%. Law journals have significantly higher average acceptance rate(68%) than other journals, while WOSS journals have the lowest(43%). Findings indicate some of the highest acceptance rates in Social Sciences literature, including competitive Business and Economics journals that traditionally have low acceptance rates. Limitations: Research relies on local context to define publication strategy of editors. Findings may not be generalizable to mainstream journals and core science countries where emphasis on research quality is stronger and editorial selection is based on scientific merit.Practical implications: Results offer useful insights into editorial management of national journals and allow us to make sense of local editorial practices. The importance of scientific merit for selection to national journal editorial boards is particularly highlighted for sound editorial evaluation of submitted manuscripts.Originality/value: This is the first attempt to document a significant relation between acceptance rates and editorial board publication behavior.

Detection Algorithm of Surface Defect Word on Printed Circuit Board

For Printed Circuit Board(PCB)surface defect detection,traditional detection methods mostly focus on template matching-based reference method and manual detections,which have the disadvantages of low defect detection efficiency,large errors in defect identification and localization,and low versatility of detectionmethods.In order to furthermeet the requirements of high detection accuracy,real-time and interactivity required by the PCB industry in actual production life.In the current work,we improve the Youonly-look-once(YOLOv4)defect detection method to train and detect six types of PCB small target defects.Firstly,the original Cross Stage Partial Darknet53(CSPDarknet53)backbone network is preserved for PCB defect feature information extraction,and secondly,the original multi-layer cascade fusion method is changed to a single-layer feature layer structure to greatly avoid the problem of uneven distribution of priori anchor boxes size in PCB defect detection process.Then,the K-means++clustering method is used to accurately cluster the anchor boxes to obtain the required size requirements for the defect detection,which further improves the recognition and localization of small PCB defects.Finally,the improved YOLOv4 defect detection model is compared and analyzed on PCB dataset with multi-class algorithms.The experimental results show that the average detection accuracy value of the improved defect detection model reaches 99.34%,which has better detection capability,lower leakage rate and false detection rate for PCB defects in comparison with similar defect detection algorithms.

Internet of Things Supported Airport Boarding System and Evaluation with Fuzzy

The existing systems sustained with the investments made require more automation and digital transformation with the continuous advancement of tech-nology.The aviation industry is a sector that is open to more automation and digi-tal transformation,mainly because of the intense competition and the analysis of a large variety of data.The long duration of operations in current airline processes and some processflows cause customer dissatisfaction and cost increase.In this study,the boarding process,which is one of the operational processes of airline transportation and is open to improvement,was discussed.The classical boarding process has been redesigned using Internet of Things technology a model called Boarding 4.0 was created.With Boarding 4.0,it is aimed to design a process where passengers can take their time before boarding more efficiently.In the study,the sub-processes of the Boarding 4.0 model,other processes that the sub-processes interact with,their activities,and data exchange passenger move-ments during the activities are explained in detail.Compared to the classical boarding process and Boarding 4.0 with the fuzzy ahp technique,it has been shown that boarding 4.0 is more advantageous and passenger movement times can be reduced during boarding.As a result of the evaluation made with the fuzzy ahp,it was determined that boarding 4.0 is more advantageous than the classical boarding process.In addition,when the total time of the sub-activities in the board-ing process is calculated,boarding activities for a passenger take 50 min with the classic boarding process and 20 min with Boarding 4.0.Thus,when Boarding 4.0 is used,the passenger gains 30 min.Furthermore,when the calculation is made concerning the airport’s current capacity,two passengers are hosted with the clas-sical boarding process,whilefive passengers are hosted with Boarding 4.0.This acquisition is significant for airports in terms of efficient use of resources.

Cardboard Eco-Bundle as an Alternative for Collation Shrink Film

Due to increasing pressure on brand owners and distributors to avoid single use plastics such as plastic bundle packaging, a new bundle packaging that consists of corrugated board only, has been designed. Obviously this new packaging should equally enable transportability. This study compares the transportability of bundles using corrugated board on the one hand and bundles using plastic collation shrink film on the other. In particular, the resistance to varying horizontal inertial forces is compared experimentally. All tested bundle packagings of corrugated board perform well above expectations and significantly better than shrink film packaging. All additional requirements regarding marketing, durability, consumer convenience, …are met.

Modeling of Micropores Drilling Force for Printed Circuit Board Micro-holes Based on Energy Method

The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole processing.The problem of optimal control of its drilling force is one of the main factors affecting the quality of micro-hole machining.To address this problem,the thrust forces and torques in PCB drilling were first modeled and analyzed,and the corresponding prediction models were established.The drilling force analysis was carried out through the micro-hole drilling experiment,the specific cutting energy under different feed rates was calculated,the influence of the size effect was clarified,and the accuracy of the prediction model was verified.The result shows that during the drilling of glass fiber cloth,changes in the material removal mechanism are induced as the feed per revolution is varied.When the feed per revolution is less than the tool edge radius,the glass fiber is not cut by the main cutting edge,but is crushed and broken.When the feed per revolution is greater than the radius of the tool edge,the glass fiber is cut by the main cutting edge.At the same time,the established analytical model can accurately reflect the influence of the size effect on the drilling torque in PCB micro-hole drilling,and the error is within 10%.This method has certain practical application value in controlling PCB micro hole processing quality.

董事会国际化对企业数字化转型的影响--基于A股上市公司的经验证据

数字化转型作为企业重要的战略之一,对经济高质量发展意义重大。本文立足于董事会组成结构,基于2011-2021年沪深A股上市公司数据,探究了董事会国际化对企业数字化转型的影响及内在机制。研究结果表明,董事会国际化对企业数字化转型具有显著的促进作用,该结论在经过一系列稳健性及内生性检验后依然成立。机制检验结果表明,董事会国际化可通过缓解融资约束,提高企业风险承担能力和内部控制水平,共同推动企业数字化转型。进一步研究发现,企业面临的市场竞争强度以及外部不确定性越大,其董事会国际化对企业数字化的促进作用便越明显,且董事会国际化可通过促进数字化转型提升企业创新绩效。因此,政府和相关机构应鼓励和引导企业董事会的国际化发展,完善相关法律法规并合理使用相关政策工具,为企业提供更为便利的融资条件,为企业提供数字化转型的资金需求,助力企业在全球数字化变革中实现高质量转型发展。

董事会非正式层级对企业ESG表现的影响——来自我国上市公司的经验证据

提高企业ESG表现对促进企业高质量发展、推动我国碳中和进程具有重要战略意义。作为一项企业战略决策,企业ESG表现与董事会治理效率息息相关。基于沪深两地A股上市公司数据,从合法性视角和董事权威不平衡的治理效应视角,分析董事会非正式层级影响企业ESG表现的内在机制;从公司决策传导机制视角出发,分析管理层能力发挥的中介效应。研究发现,董事会非正式层级对企业ESG表现具有显著的正向促进作用;管理层能力在董事会非正式层级与企业ESG表现之间起中介作用;董事会非正式层级对企业ESG表现的影响在权力大小不同、稳定性不同的管理团队中存在显著差异。通过对董事会非正式层级影响企业决策行为的研究,丰富了董事会非正式层级作用及效果的内在机制的相关研究,对于进一步提升中国企业ESG表现具有重要的借鉴意义。

衰退企业“临危受命”CEO如何实现业绩反转——基于模糊集定性比较分析

面临衰退威胁的企业往往期望变更C E O以摆脱困境,然而何种战略能帮助继任CEO实现企业业绩反转,现有研究未能给出解答。基于此,本文将权力理论引入研究框架,运用模糊集定性比较分析方法,以2006—2016年变更CEO的民营制造类衰退企业为研究对象,探索了衰退企业继任CEO、董事会之间的权力制衡关系与反转战略的组合匹配对业绩反转的影响,归纳出“董事会主导×防御型”“外部CEO主导×探索型”“内部CEO主导×防御型”三种反转模式,发现了“董事会为主、CEO为辅”和“CEO为主、董事会监督和咨询为辅”两类制衡关系中主导者动机和能力与战略的匹配,是实现业绩反转的关键,支持了新战略领导层之间的互动关系与企业战略导向的匹配会影响反转战略有效性的命题,丰富了衰退企业业绩反转研究的理论视角和研究方法。

基于卷积神经网络的预制叠合板多目标智能化检测方法

在生产过程中,预制构件尺寸不合格问题将导致其在施工现场无法顺利安装,从而影响工期。为推进预制构件智能化生产的进程,以预制叠合板为例,基于卷积神经网络研究生产过程中的智能检测方法,在生产流水线上设计并安装图像采集系统,建立预制叠合板尺寸检测数据集。通过YOLOv5算法实现对混凝土底板、预埋PVC线盒及外伸钢筋的识别,并以固定磁盒作为基准参照物进行尺寸检测误差分析,实现混凝土底板尺寸、预埋PVC线盒坐标的检测,在降低训练数据集参数规模的工况下保持较高的识别精度。结果表明:该方法可以有效检测预制叠合板的底板数量和尺寸、预埋PVC线盒数量和坐标,并实现弯折方向不合格的外伸钢筋检测,并能降低人工成本,提高检测精度,加快检测速度,提高预制叠合板的出厂质量。

我国大豆种业科技创新发展现状及对策建议

我国是大豆消费和进口大国,推动大豆产业振兴、强化大豆种业科技创新对于保障我国粮饲安全意义重大。结合2016年以来我国大豆种植面积、产量、进口量等数据及相关研究进展,深入分析我国大豆产业所面临的刚性需求量大且长期依靠进口、平均单产水平低且种植面积受限、大豆进口面临潜在风险且不易疏解等形势挑战,简述了“十三五”期间我国大豆种业科技创新发展成效,系统分析了我国大豆种业科技创新面临的种质资源研究水平不高、原始科技创新能力不足、商业化育种体系不完善、知识产权保护体系滞后等问题,并据此提出我国大豆种业科技创新发展的对策建议,以期为推动我国大豆种业科技自立自强提供重要参考。

基于EdgeBoard的AI视觉多功能智能车的设计与实现

以百度飞桨PaddlePaddle作为运算平台,采用卷积神经网络算法构建数据模型,对智能车赛道数据进行了采集和处理,并基于百度深度学习开源平台AI Studio进行模型训练,完成对车道数据的检测.本系统实现了将赛道检测的人工智能技术与传统运用传感器进行侧面标识物的检测相结合,最终完成基于百度EdgeBoard计算板和Wobot控制器的视觉多功能智能车的设计与实现.

装配式装修背景下建材污染物释放特性及其预测研究

装修材料在生产和使用过程中会释放出有害物质,污染空气质量。为此,研究基于装配式装修的建材污染物释放特性,将大容量环境测试舱运用于建材污染物释放能力测试,以分析建材污染物的浓度变化,对其长期释放规律进行预测。研究结果表明,硅酸钙板在第10天的甲醛、苯、VOC浓度值分别为0.14、0.30、0.46 mg/m^(3),低于密度板材的0.29、1.14、1.72 mg/m^(3)。以某住宅为例,装配式装修的综合指数为0.91,在0.50至1.00之间,这表明该住宅室内空气未遭受污染。综上所述,研究提出的建材污染物释放规律预测具有可行性,且装配式装修可以有效降低建材污染物浓度,提升空气质量。

有机封装基板标准化工作现状及发展思考

随着我国集成电路产业的发展,作为集成电路封装重要零部件的一种特殊印制电路板(PCB)——有机封装基板呈现出高速增长的态势,相应的标准化需求日渐显现。回顾了过去我国PCB领域标准化的方针,分析了工作方针调整的必要性。在梳理和总结有机封装基板产业发展关键点的基础上,提出了有机封装基板标准化工作新的发展思路,指出了基于客户联系、产品良率控制和原材料研制等方面的标准化工作重点任务。针对其发展趋势,聚焦嵌入式基板这个未来可能给整个有机封装基板产业链带来重组的着力点,提出了我国在这一产业变革中未来标准化工作的思路和任务。