Classification of 3D bioprinting As we mentioned in the last editorial,3D printing,also known as additive manufacturing,could be considered as the reverse process of potato cutting,automatically assembling sliced pota...Classification of 3D bioprinting As we mentioned in the last editorial,3D printing,also known as additive manufacturing,could be considered as the reverse process of potato cutting,automatically assembling sliced potato,shredded potato,diced potato to integrity[1].Generally speaking,cell-laden 3D bioprinting can be classified into three types:extrusion-based,droplet-based and photocuring-based bioprinting according to different printing principles.Extrusion-based bioprinting squeezes out continuous hydrogel fibers to set up structures;dropletbased bioprinting generates droplets as the basic unit for biofabrication;and photocuring-based bioprinting utilizes the characteristics of light-sensitive materials,to stack 3D models layer-by-layer.Different bioprinting approaches own diverse characteristics facing various scenarios and have specific requirements for bioinks.展开更多
Recently,low-cost desktop three-dimensional(3D)printers,employing the fused deposition modeling(FDM)technique,have gained widespread popularity.However,most users cannot test the strength of printed parts,and little i...Recently,low-cost desktop three-dimensional(3D)printers,employing the fused deposition modeling(FDM)technique,have gained widespread popularity.However,most users cannot test the strength of printed parts,and little information is available about the mechanical properties of printed high-impact polystyrene(HIPS)parts using desktop 3D printers.In this study,the user-adjustable parameters of desktop 3D printers,such as crisscross raster orientation,layer thickness,and infill density,were tested.The experimental plans were designed using the Box-Behnken method,and tensile,3-point bending,and compression tests were carried out to determine the mechanical responses of the printed HIPS.The prediction models of the process parameters were regressed to produce the optimal combination of process parameters.The experimental results showcase that the crisscross raster orientation has significant effects on the flexural and compression strengths,but not on the tensile strength.With an increase in the layer thickness,the tensile,flexural,and compression strengths first decreased and then increased,reaching their minimum values at approximately 0.16 mm layer thickness.In addition,they all increased with an increase of infill density.It was demonstrated that when the raster orientation,layer thickness,and infill density were 13.08°/–76.92°,0.09 mm,and 80%,respectively,the comprehensive mechanical properties of the printed HIPS were optimal.Our results can help end-users of desktop 3D printers understand the effects of process parameters on the mechanical properties,and offer practical suggestions for setting proper printing parameters for fabricating HIPS parts.展开更多
Recently,a China-Asia transit train,loaded with second-hand cars,auto parts,and electronic products,set off slowly from the China-Kazakhstan Logistics Base in Lianyungang,heading to stations such as Almaty in Central ...Recently,a China-Asia transit train,loaded with second-hand cars,auto parts,and electronic products,set off slowly from the China-Kazakhstan Logistics Base in Lianyungang,heading to stations such as Almaty in Central Asia,and to more distant European stations.This express marks the 410th China-Europe(Central Asia)train launched from Lianyungang this year,indicating that the first half target had been completed 25 days in advance.Public data shows that the annual transportation value of the China-E.U.Railway Express has increased from USD 8 billion in 2016 to USD 56.7 billion in 2023.Export goods have gradually expanded from initial IT products such as laptops and printers to more than 50,000 categories including clothing,shoes,hats,auto parts,daily necessities,food,wood,furniture,chemical products,and machinery equipment.展开更多
A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements...A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements can be carried out, permitting distinctive moving prospects. After presenting our configuration and delineating a bunch of potential structures, a helpful model dependent on open-source equipment and programming arrangements has been presented conditionally. The model can be effectively tried in a few makes-a plunge streams and lakes throughout the planet. The unwavering quality of the printed models can be strained distinctly in generally shallow waters. Nonetheless, we accept that their accessibility will inspire the overall population to construct and test submerged robots, subsequently accelerating the improvement of imaginative arrangements and applications.展开更多
According to the ITMF’s Global Textile Industry Survey(GTIS)conducted in the first half of July 2023,the business situation improved on average worldwide in July 2023 despite remaining negative.An increasing number o...According to the ITMF’s Global Textile Industry Survey(GTIS)conducted in the first half of July 2023,the business situation improved on average worldwide in July 2023 despite remaining negative.An increasing number of companies have adapted to the harsh business environment and are now reporting improvements.A regional analysis shows that Asia is struggling the most and South America is back in positive territory.The global business expectations did not change since March 2023.All regions remain optimistic about the situation in 6 months-time,except for East Asia.Weavers/knitters and dyers/finishers/printers are two segments where the expectations have turned negative.展开更多
In recent years proof of “indoor air quality”, designed to protect and improve the health and safety of workers, was a central strategy in the prevention of many companies. The man creates with the environment in wh...In recent years proof of “indoor air quality”, designed to protect and improve the health and safety of workers, was a central strategy in the prevention of many companies. The man creates with the environment in which he lives and works a continuous gas exchange through breathing;this makes the respiratory system main entrance of air pollutants. The indoor pollutants are numerous and originate from different sources. Their concentration may vary over time and depends on the nature of the source, on ventilation, habits and activities carried out by the occupants in the areas concerned. It is well known that photocopiers and laser printers are equipment that emit several chemicals (ozone, solvents, toner dust) both to release the materials used for their operation (toner, ink, paper) and then to the special printing technology used. During the printing and photocopying processes occurring chemical and physical processes complex, during which the components of toner and paper will react under the influence of light and high temperatures. More recently, there have been a growing number of articles as a result of indoor air pollution. They have become more and more significant;probably because of increasing of the concentrations of harmful substances in the confined environment. Particular attention has been given to the emission of harmful substances from electronic equipment and printing that are increasingly present in living and working place. This work was the main objective the emission of volatile organic compounds, formaldehyde and ozone from laser printing devices and consequently the estimation of elimination of same substances through a paper filters which operate through a mechanism of filtration surface with interstitial and penetration of particles into matrix filter on agglomeration, they also enclose type sandwich a layer of activated carbon.展开更多
文摘Classification of 3D bioprinting As we mentioned in the last editorial,3D printing,also known as additive manufacturing,could be considered as the reverse process of potato cutting,automatically assembling sliced potato,shredded potato,diced potato to integrity[1].Generally speaking,cell-laden 3D bioprinting can be classified into three types:extrusion-based,droplet-based and photocuring-based bioprinting according to different printing principles.Extrusion-based bioprinting squeezes out continuous hydrogel fibers to set up structures;dropletbased bioprinting generates droplets as the basic unit for biofabrication;and photocuring-based bioprinting utilizes the characteristics of light-sensitive materials,to stack 3D models layer-by-layer.Different bioprinting approaches own diverse characteristics facing various scenarios and have specific requirements for bioinks.
基金supported by the National Natural Science Foundation of China(Grant No.51975097)the National Key Research and Development Project(Grant No.2020YFA0713702).
文摘Recently,low-cost desktop three-dimensional(3D)printers,employing the fused deposition modeling(FDM)technique,have gained widespread popularity.However,most users cannot test the strength of printed parts,and little information is available about the mechanical properties of printed high-impact polystyrene(HIPS)parts using desktop 3D printers.In this study,the user-adjustable parameters of desktop 3D printers,such as crisscross raster orientation,layer thickness,and infill density,were tested.The experimental plans were designed using the Box-Behnken method,and tensile,3-point bending,and compression tests were carried out to determine the mechanical responses of the printed HIPS.The prediction models of the process parameters were regressed to produce the optimal combination of process parameters.The experimental results showcase that the crisscross raster orientation has significant effects on the flexural and compression strengths,but not on the tensile strength.With an increase in the layer thickness,the tensile,flexural,and compression strengths first decreased and then increased,reaching their minimum values at approximately 0.16 mm layer thickness.In addition,they all increased with an increase of infill density.It was demonstrated that when the raster orientation,layer thickness,and infill density were 13.08°/–76.92°,0.09 mm,and 80%,respectively,the comprehensive mechanical properties of the printed HIPS were optimal.Our results can help end-users of desktop 3D printers understand the effects of process parameters on the mechanical properties,and offer practical suggestions for setting proper printing parameters for fabricating HIPS parts.
文摘Recently,a China-Asia transit train,loaded with second-hand cars,auto parts,and electronic products,set off slowly from the China-Kazakhstan Logistics Base in Lianyungang,heading to stations such as Almaty in Central Asia,and to more distant European stations.This express marks the 410th China-Europe(Central Asia)train launched from Lianyungang this year,indicating that the first half target had been completed 25 days in advance.Public data shows that the annual transportation value of the China-E.U.Railway Express has increased from USD 8 billion in 2016 to USD 56.7 billion in 2023.Export goods have gradually expanded from initial IT products such as laptops and printers to more than 50,000 categories including clothing,shoes,hats,auto parts,daily necessities,food,wood,furniture,chemical products,and machinery equipment.
文摘A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements can be carried out, permitting distinctive moving prospects. After presenting our configuration and delineating a bunch of potential structures, a helpful model dependent on open-source equipment and programming arrangements has been presented conditionally. The model can be effectively tried in a few makes-a plunge streams and lakes throughout the planet. The unwavering quality of the printed models can be strained distinctly in generally shallow waters. Nonetheless, we accept that their accessibility will inspire the overall population to construct and test submerged robots, subsequently accelerating the improvement of imaginative arrangements and applications.
文摘According to the ITMF’s Global Textile Industry Survey(GTIS)conducted in the first half of July 2023,the business situation improved on average worldwide in July 2023 despite remaining negative.An increasing number of companies have adapted to the harsh business environment and are now reporting improvements.A regional analysis shows that Asia is struggling the most and South America is back in positive territory.The global business expectations did not change since March 2023.All regions remain optimistic about the situation in 6 months-time,except for East Asia.Weavers/knitters and dyers/finishers/printers are two segments where the expectations have turned negative.
文摘In recent years proof of “indoor air quality”, designed to protect and improve the health and safety of workers, was a central strategy in the prevention of many companies. The man creates with the environment in which he lives and works a continuous gas exchange through breathing;this makes the respiratory system main entrance of air pollutants. The indoor pollutants are numerous and originate from different sources. Their concentration may vary over time and depends on the nature of the source, on ventilation, habits and activities carried out by the occupants in the areas concerned. It is well known that photocopiers and laser printers are equipment that emit several chemicals (ozone, solvents, toner dust) both to release the materials used for their operation (toner, ink, paper) and then to the special printing technology used. During the printing and photocopying processes occurring chemical and physical processes complex, during which the components of toner and paper will react under the influence of light and high temperatures. More recently, there have been a growing number of articles as a result of indoor air pollution. They have become more and more significant;probably because of increasing of the concentrations of harmful substances in the confined environment. Particular attention has been given to the emission of harmful substances from electronic equipment and printing that are increasingly present in living and working place. This work was the main objective the emission of volatile organic compounds, formaldehyde and ozone from laser printing devices and consequently the estimation of elimination of same substances through a paper filters which operate through a mechanism of filtration surface with interstitial and penetration of particles into matrix filter on agglomeration, they also enclose type sandwich a layer of activated carbon.