Design of Traditional Chinese Medicine Extraction Workshop Process and Automation System

Objective: This paper takes the example of a Panax notoginseng extraction workshop and designs an automated production workshop with advanced domestic capabilities. Methods: 1) Based on the small-scale Panax notoginseng extraction process, the feasibility of the workshop production process is demonstrated. 2) The workshop process design for Panax Notoginseng saponin extraction is completed, including production organization plans and the selection of key equipment. 3) For the Panax notoginseng extraction workshop process, an automated production control system is designed. Conclusion: Through optimized design of the production process and automation system, continuous and automated production of traditional Chinese medicine extraction is achieved, leading to improvements in drug quality and production efficiency.

Operational Implementation of the ATOVS Processing Procedure in KMA and Its Validation

The Korea Meteorological Administration (KMA) has processed the data from the advanced TOVS (ATOVS) onboard NOAA-16 satellite since May 2001. The operational production utilizes the AAPP (ATOVS and AVHRR Processing Package) of EUMETSAT and IAPP (International ATOVS Processing Package) of the University of Wisconsin. For the initial guess profiles, the predicted fields (usually 6 to 12 hour forecasted fields) from the global aviation model of NOAA/NCEP are used. The average number of profiles retrieved from the ATOVS data is about 1,300 for each morning and afternoon orbit at about 18 and 06 UTC, respectively. The retrieved temperature and dew point temperatures are provided to forecasters in real time and used for initialization of prediction models. With the advanced microwave sensor (AMSU; Advanced Microwave Sounding Unit), accuracy of the ATOVS products is expected to be better than that of the TOVS products, especially in cloudy conditions. Indeed, the preliminary results from a validation study with the collocated radiosonde data during a 8-month period, from May to December 2001, for the East Asia region show an improved accuracy of the ATOVS products for cloudy skies versus the TOVS, especially for higher altitudes. The RMS (Root Mean Square) difference between the ATOVS products and radiosonde data is about 1.3°C for both clear and cloudy conditions, except for near the ground and at higher altitudes, at around 200 hPa. There is no significant temporal variation of the error statistics at all pressure levels. In case of the water vapor mixing ratio, the largest difference is shown at lower altitudes, while the accuracy is much better for the clear sky cases than the cloudy sky cases. The bias and RMSE at lower altitudes is about 0.557 g kg−1 and 2.5 g kg−1 and decrease significantly with increasing altitude.

Feature extraction of wood-hole defects using wavelet-based ultrasonic testing

The primary bottleneck to extracting wood defects during ultrasonic testing is the accuracy of identifying the wood defects. The wavelet energy moment was used to extract defect features of artificial wood holes drilled into 120 elm samples that differed in the number of holes to verify the validity of the method. Wavelet energy moment can reflect the distribution of energy along the time axis and the amount of energy in each frequency band,which can effectively extract the energy distribution characteristics of signals in each frequency band; therefore,wavelet energy moment can replace the wavelet frequency band energy and constitute wood defect feature vectors. A principal component analysis was used to normalize and reduce the dimension of the feature vectors. A total of 16 principal component features were then obtained, which can effectively extract the defect features of the different number of holes in the elm samples.