Capillary electrophoresis coupled to mass spectrometry（CE–MS） was used for the analysis of naphthenic acid fraction compounds（NAFCs） of oil sands process-affected water（OSPW）. A standard mixture of amine-deriva...Capillary electrophoresis coupled to mass spectrometry（CE–MS） was used for the analysis of naphthenic acid fraction compounds（NAFCs） of oil sands process-affected water（OSPW）. A standard mixture of amine-derivatized naphthenic acids is injected directly onto the CE column and analyzed by CE–MS in less than 15 min. Time of flight MS analysis（TOFMS）, optimized for high molecular weight ions, showed NAFCs between 250 and 800 m/z. With a quadrupole mass analyzer, only low-molecular weight NAFCs（between 100 and 450 m/z） are visible under our experimental conditions. Derivatization of NAFCs consisted of two-step amidation reactions mediated by 1-ethyl-3-（3-dimethylaminopropyl）carbodiimide（EDC）, or mediated by a mixture of EDC and N-hydroxysuccinimide, in dimethyl sulfoxide, dichloromethane or ethyl acetate. The optimum background electrolyte composition was determined to be 30%（V/V） methanol in water and 2%（V/V） formic acid. NAFCs extracted from OSPW in the Athabasca oil sands region were used to demonstrate the feasibility of CE–MS for the analysis of NAFCs in environmental samples, showing that the labeled naphthenic acids are in the mass range of 350 to 1500 m/z.展开更多
Surfactants are widely used in the petroleum industry as one kind of Enhanced Oil Recovery methods (EOR). The oil sands mines in Northern Alberta are the largest one in the world. Due to using sodium hydroxide in bitu...Surfactants are widely used in the petroleum industry as one kind of Enhanced Oil Recovery methods (EOR). The oil sands mines in Northern Alberta are the largest one in the world. Due to using sodium hydroxide in bitumen extraction process, there are a lot of surfactant molecules in the tailing water. The surfactants from oil sands industry have brought a potential threat to the environment and human health. Depending on the performance of surfactant at the interface, this work focuses on removing these harmful surfactants from the tailing water and not bringing other possible hazardous substances. Moreover, a mathematical model is built to calculate the removal efficiency of the surfactant. The time required for removing the surfactant is determined experimentally. In conclusion, most of surfactant molecules are adsorbed at the oil/water interface. The fraction of the surfactant staying at the oil/water interface is high. Most of the surfactants in tailing water can be eliminated. The time of surfactant migration can be used for setting up the update time of the oil film in the automatic instrument, which can be designed in the future.展开更多
基金supported by the Environment Canada and the NSERC
文摘Capillary electrophoresis coupled to mass spectrometry（CE–MS） was used for the analysis of naphthenic acid fraction compounds（NAFCs） of oil sands process-affected water（OSPW）. A standard mixture of amine-derivatized naphthenic acids is injected directly onto the CE column and analyzed by CE–MS in less than 15 min. Time of flight MS analysis（TOFMS）, optimized for high molecular weight ions, showed NAFCs between 250 and 800 m/z. With a quadrupole mass analyzer, only low-molecular weight NAFCs（between 100 and 450 m/z） are visible under our experimental conditions. Derivatization of NAFCs consisted of two-step amidation reactions mediated by 1-ethyl-3-（3-dimethylaminopropyl）carbodiimide（EDC）, or mediated by a mixture of EDC and N-hydroxysuccinimide, in dimethyl sulfoxide, dichloromethane or ethyl acetate. The optimum background electrolyte composition was determined to be 30%（V/V） methanol in water and 2%（V/V） formic acid. NAFCs extracted from OSPW in the Athabasca oil sands region were used to demonstrate the feasibility of CE–MS for the analysis of NAFCs in environmental samples, showing that the labeled naphthenic acids are in the mass range of 350 to 1500 m/z.
文摘Surfactants are widely used in the petroleum industry as one kind of Enhanced Oil Recovery methods (EOR). The oil sands mines in Northern Alberta are the largest one in the world. Due to using sodium hydroxide in bitumen extraction process, there are a lot of surfactant molecules in the tailing water. The surfactants from oil sands industry have brought a potential threat to the environment and human health. Depending on the performance of surfactant at the interface, this work focuses on removing these harmful surfactants from the tailing water and not bringing other possible hazardous substances. Moreover, a mathematical model is built to calculate the removal efficiency of the surfactant. The time required for removing the surfactant is determined experimentally. In conclusion, most of surfactant molecules are adsorbed at the oil/water interface. The fraction of the surfactant staying at the oil/water interface is high. Most of the surfactants in tailing water can be eliminated. The time of surfactant migration can be used for setting up the update time of the oil film in the automatic instrument, which can be designed in the future.
