Didactic Sequences as an Educational Product to Facilitate Teaching-Learning Processes in Lato Sensu Graduate Courses in the Area of Health Management in Primary Care

Teaching strategies can be considered as techniques that are constructed to be used with the objective of promoting teaching and learning in the classroom, so that the teacher is considered a mentor, as he is the one who selects, analyzes, studies, organizes, builds and proposes the most classic tools to facilitate the learning process [1]. This study is an experience report related to the construction of an educational product that consists of the elaboration of pedagogical strategies, characterized by five didactic sequences in the perspective of collaborating with teaching-learning processes in lato sensu graduate courses. The themes that are part of the didactic sequences were built based on the results obtained in scientific research carried out during the development of the strict sensu postgraduate course in Teaching in Health and Technology, which involved: the work of coordinators who work in the field of health management in Primary Care, situations that challenge the management of Primary Care and the potentialities of work in the management of Primary Care. The didactic sequences have fun teaching strategies that provide meaningful learning for a future qualified professional performance. These sequences involve the use of active methodologies and the use of digital tools. The educational product developed seeks to promote benefits that can collaborate with the improvement of Primary Care Management and teaching-learning processes in the training of health professionals. Therefore, the pedagogical strategies, as well as its entire construction process, were developed through the collaboration of professors of the Health and Society discipline at the State University of Health Sciences of Alagoas (UNCISAL), seeking to make it qualify for effective construction of knowledge and that promote its wide use in the academic environment.

Effective Development of Enterprise Emergency Management under the New Policy of Safety Production

In recent years,China has formed a more perfect emergency management system,and has achieved more significant results.The form of safety production has maintained a continuous good development trend,showing the characteristics of"two declines,one being basically flat,and one zero occurrence".In order to further strengthen the implementation of production safety responsibilities and resolutely prevent and contain extremely major accidents,the recent national production safety teleconference deployed 15 measures to pay close attention to the implementation,seriously pursue accountability,adhere to the red line,and immediately carry out in-depth and solid production safety inspections across the country.In such a high pressure situation,the ways to effectively carry out the security management of enterprises were briefly described in this paper.

No generality in biodiversity-productivity relationships along elevation in temperate and subtropical forest landscapes

An improved understanding of biodiversity-productivity relationships(BPRs)along environmental gradients is crucial for effective ecosystem management and biodiversity conservation.The stress-gradient hypothesis suggests that BPRs are stronger in stressful environments compared to more favorable conditions.However,there is limited knowledge regarding the variation of BPRs along elevational gradients and their generality across different landscapes.To study how BPRs change with elevation,we harnessed inventory data on 6,431 trees from152 plots surveyed twice in eight to ten year intervals in mountain forests of temperate Europe and subtropical Asia.We quantified the relationship between aboveground productivity and different biodiversity measures,including taxonomic,functional,and phylogenetic diversity.To elucidate the processes underlying BPRs,we studied the variation of different functional traits along elevation across landscapes.We found no general pattern of BPRs across landscapes and elevations.Relationships were neutral for all biodiversity measures in temperate forests,and negative for taxonomic and functional diversity in subtropical forests.BPRs were largely congruent between taxonomic,functional and phylogenetic diversity.We found only weak support for the stress-gradient hypothesis,with BPRs turning from negative to positive(effect not significant)close to the tree line in subtropical forests.In temperate forests,however,elevation patterns were strongly modulated by species identity effects as influenced by specific traits.The effect of traits such as community-weighted mean of maximum plant height and wood density on productivity was congruent across landscapes.Our study highlights the context-dependence of BPRs across elevation gradients and landscapes.Species traits are key modulating factors of BPRs and should be considered more explicitly in studies of the functional role of biodiversity.Furthermore,our findings highlight that potential trade-offs between conserving biodiversity and fostering ecosystem productivity exist,which require more attention in policy and management.

Leveraging Robust Artificial Intelligence for Mechatronic Product Development—A Literature Review

Mechatronic product development is a complex and multidisciplinary field that encompasses various domains, including, among others, mechanical engineering, electrical engineering, control theory and software engineering. The integration of artificial intelligence technologies is revolutionizing this domain, offering opportunities to enhance design processes, optimize performance, and leverage vast amounts of knowledge. However, human expertise remains essential in contextualizing information, considering trade-offs, and ensuring ethical and societal implications are taken into account. This paper therefore explores the existing literature regarding the application of artificial intelligence as a comprehensive database, decision support system, and modeling tool in mechatronic product development. It analyzes the benefits of artificial intelligence in enabling domain linking, replacing human expert knowledge, improving prediction quality, and enhancing intelligent control systems. For this purpose, a consideration of the V-cycle takes place, a standard in mechatronic product development. Along this, an initial assessment of the AI potential is shown and important categories of AI support are formed. This is followed by an examination of the literature with regard to these aspects. As a result, the integration of artificial intelligence in mechatronic product development opens new possibilities and transforms the way innovative mechatronic systems are conceived, designed, and deployed. However, the approaches are only taking place selectively, and a holistic view of the development processes and the potential for robust and context-sensitive artificial intelligence along them is still needed.

Factors Impacting Benefits of Participatory Forest Management in Upper Imenti Forest, Meru County, Kenya

This study focused on identifying factors affecting the benefits of Participatory Forestry Management (PFM) income generating activities in Upper Imenti Forest and whether they are dependent on status of participation in forest management through membership of Community Forest Association (CFA) or not. Cross-sectional survey research design was applied for collecting quantitative data using a semi-structured questionnaire administered to 384 households stratified on the basis of PFM participation status. Qualitative data was collected through focused group discussions using a checklist and key informant interviews using an interview schedule. Using Statistical Package for Social Sciences version 25, Binomial regression with Wald Chi-square was analyzed to identify factors perceived to be significantly influencing benefits for PFM participants and Pearson Chi-square to compare factors perceived to be affecting PFM and non-PFM participants. CFA members participation in PFM was significantly and positively affected by benefits of PFM income generating activities and forest products accessed in the forest. Benefits linked to Plantation Establishment for Livelihood Improvement System (PELIS) for CFA members were significantly reduced by enforcement of moratorium policy since February 2018, diseases and pests, poor PELIS guideline adherence and animal damage. Benefits related to state forest access for firewood by the CFA members were negatively influenced by the moratorium policy. Diseases and pests affected benefits associated with bee keeping significantly. Comparing factors under different PFM participation status, crop production was significantly affected by policy changes, pest and diseases, animal damage and PELIS guideline adherence for CFA members than for Non-CFA members. Policy changes also affected the CFA members significantly in firewood collection and access to fodder in the state forest than the Non-CFA members. Hence, sustainable community participation in Upper Imenti Forest management requires: increasing PFM benefits, addressing factors reducing benefits and enhancing active participation of CFA members in PFM related decision-making processes.

Marketing Management for Consumer Products in the Era of the Internet of Things

In the Internet of Things (IoT) consumer products like coffee machines and smoke detectors are connected with the Internet, which effectively expands the Internet to the physical world. Such products have the ability to collect and share data from the user’s environment and, thus, their broad emergence will affect well-established concepts presented in the extant marketing literature. In order to provide a distinct contribution, we focus on customer relationship management, product life cycle management, as well as business model development and discuss implications of the enhanced capabilities of IoT products in these fields. By means of an extensive analysis of current developments in theory and practice, we systematically deduce ten research propositions. The paper concludes with a synthesis of findings and an outlook to promising directions for further research in IoT-oriented marketing management.

Management Practices and Production Constraints of Indigenous Somali Cattle Breed in Shabelle Zone, Somali Regional State, Ethiopia

This study was conducted in Shabelle zone of Somali Regional State to assess management practices and production constraints of indigenous Somali Cattle. A total of 200 household heads were selected from four cattle potential districts;Dhanan, Ber’ano, Godey & Adadle. The relevant information was collected through semi-structured questionnaire, focus group discussion, key informants interview, and personal observations. Majority of the respondents were illiterate. The average cattle holding size was 8.97 heads/household and cattle were mainly kept for milk production. The major feed resources in the study area were natural pasture and crop residue, and communal grazing was the most important feeding system in the area. Feed shortage was a problem hindering cattle production in the study area during dry season mainly January up to March. Animals traveled long distances to watering points (>5 km) during dry season, while in wet season, animals were watered in nearby water sources. Cattle housing was open kraal fenced with the thorned plenty acacia trees and calves were housed separately from other cattle. Breeding in the study area was uncontrolled and was bred with their own or neighbors’ bull. Age at first mating, age at first calving and calving interval were 3.25 years, 4.05 years and 16.56 months, respectively. The daily milk yield and lactation length were 2.22 liters and 8.07 months, respectively. The production and reproduction performance of Somali cattle was relatively higher than other local breeds in the country mainly in terms of milk yield and fertility potential under the existing environmental conditions. The major constraints of cattle production were feed shortage, disease, water scarcity, lack of veterinary services, marketing problem and predator. Among those constraints, inadequate supply of quality feed, diseases and water shortage were the main reasons for low productivity of cattle and are the major factors limiting productivity. Therefore, to sustain the production system in the study areas, it is recommended to improve the current condition of communal rangelands through management of degraded areas by awareness creation on the value of these common resources and development of rules and regulation to sustain the existing resource and implement over the utilization of communal/pastoral rangeland management systems to reduce constraints such as shortage of feed, drought and grazing land deterioration which perpetuated through time due to land-use changes and seasonal fluctuation).

Romanian legal management rules limit wood production in Norway spruce and beech forests

Background： The quantitative impact of forest management on forests＇ wood resource was evaluated for Picea and Fagus mixed forests. The effects on the productivity of tendering operations, thinnings and rotation length have seldom been directly quantified on landscape scale. Methods： Two sites of similar fertility but subject to contrasted forest management were studied with detailed inventories： one in Germany, the other in Romania, and compared with the respective national forest inventories. In Romania, regulations impose very long rotations, low thinnings and a period of no-cut before harvest. In contrast, tending and thinnings are frequent and intense in Germany. Harvests start much earlier and must avoid clear cutting but maintain a permanent forest cover with natural regeneration. While Germany has an average annual wood increment representative for Central Europe, Romania represents the average for Eastern Europe. Results： The lack of tending and thinning in the Romanian site resulted in twice as many trees per hectare as in the German site for the same age. The productivity in Romanian production forests was 20 % lower than in Germany despite a similar fertility. The results were supported by the data from the national forest inventory of each country, which confirmed that the same differential exists at country scale. Furthermore, provided the difference in rotation length, two crops are harvested in Germany when only one is harvested in Romania. The losses of production due to a lower level of management in Romania where estimated to reach 12.8 million m3.y-1 in regular mountain production forests, and to 15 million m3.y-1 if managed protection forest is included. Conclusions： The productivity of Picea and Fagus mountain forests in Romania is severely depressed by the lack of tending and thinning, by overly long rotations and the existence of a 25-years no-cut period prior to harvest. The average standing volume in Germany was 50 % lower than in Romania, but the higher harvesting rate resulted in more than doubling wood production. Considering the mitigation effects of climate change by forests, it emerges that the increase in standing volume of forests in Romania is smaller than the additional harvest in Germany which serves fossil fuel substitution.

Population distribution and threats to sustainable management of selected non-timber forest products in tropical lowland rainforests of south western Nigeria

Uncontrolled harvesting of non-timber forest products （NTFPs） poses a serious risk of extermination to several of these species in Nigeria. Yet, there is a paucity of information on the distribution, population status and sustainable management of NTFPs in most of the tropical lowland rainforests. We, therefore, assessed the population, distribution and threats to sustainable management of NTFPs within the tropical lowland rainforests of Omo and Shasha Forest Reserves, south western Nigeria. Data were obtained through inventory surveys on five top priority species including： bush mango （Irvingia gabonensis （Aubry-Lecomte ex O’Rorke） Baill）, African walnut （Tetracarpidium conophorum （Mull. Arg.） Hutch. ＆ Dalziel syn. Plukenetia conophora）, chew-stick （Massularia acuminata （G. Don） Bullock）, fever bark （Annickia chlorantha Setten ＆ P.J.Maas syn. Enantia chloranta） and bush pepper （Piper guineense Schumach. ＆ Thonn.）. Purposive and stratified random sampling techniques were used for the inventory. Each forest reserve was stratified into three, viz： less disturbed natural forest （for areas that have been rested for at least ten years）, recently disturbed natural forest （for areas that have suffered one form of human perturbation or the other in the last five years）, and plantation forest （for areas carrying forest plantation）. Data were collected from eighteen 10 m × 500 m belt transects located in the above strata. The species were generally fewer in both plantation and recently disturbed natural forest than the less disturbed natural forest, suggesting that forest disturbances （habitat modification） for other uses may have an effect on the occurrence and densities of the NTFPs. Exceptions to this trend were found for P. guineense and T. conophorum, which were fairly common in both plantation and recently disturbed natural forest. Among three tree NTFP species （i.e. I. gabonensis, M. acuminata and A. chlorantha）, only I. gabonensis showed a significant difference in overall DBH size classes for both reserves （t=？2.404; df =21; p=0.026）. Three tree NTFP species in both reserves further showed differences from the regular patterns of distribution of trees. The fairly regular reverse J-shaped size class distribution observed for M. acuminata in the study sites, however, suggests a recuperating population. In general, destructive harvesting of species, logging operations, low population size, narrow distribution ranges and habitat degradation are the major threats to the population of NTFPs in the study area. The implications of our findings for sustainable management of NTFPs in the study area are discussed and recommendations are made for a feasible approach towards enhancing the status of the species.

Production Management Modelling Based on MAS

Modelling based on multi-agent system （MAS） was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent （OA）, manager agent （MA）, production agent （PA）, and service agent （SA）, and realize information sharing. The PA is also built on MAS, and it includes two agents, task agent （TA）, and resource agent （RA）. It has been found that the modelling is superior to the old one. It can improve the working flow and production efficiency, and shorten the time of delivery.

Quality Management System of Agricultural Products Based on Spring

This article gives an overview of important property of the integrated management of agricultural product quality safety system,analyzes the lightweight characteristics of Spring technical system,hierarchical organization of MVC,and the technology SSH+Ajax associated with the Spring framework system.On the basis of this technical system,we design the quality management system of agricultural products under B/S model.This article points out that this system is realized mainly through consumers'information feedback and order management;then discusses operation environment,expandability,portability and security of the system.

Agronomic, Water Productivity and Economic Analysis of Irrigated Rice under Different Nitrogen and Water Management Methods

The most limiting factors for irrigated rice farming are water and nitrogen. Efficient water and nitrogen management has remained critical for sustainable rice production in irrigated rice farming system. Due to rapid global population growth and climate change, future rice production will depend heavily on developing strategies and practices that use water and nitrogen efficiently. The study therefore set to evaluate agronomic, water productivity and economic analysis of irrigated rice under various nitrogen and water management methods. To achieve the set objectives, field and pot experiments were carried out at the Soil and Irrigation Research Centre, University of Ghana, Kpong in 2015 and 2016 cropping season. The field experiment was laid in a split plot design with water management treatments as main plots and N fertilizer as subplot treatment. The pot experiment was carried out in a randomized complete block design with five replications. The water management treatments were;continuous submergence (SC), alternate wet and dry soil condition (AWD) and moist soil condition (MC). Nitrogen fertilizer rates were;no N fertilizer (N0), 60 kg N/ha (N1) and 90 kg N/ha (N2). Data such as yield and yield parameters of rice, water use, water productivity, costs and returns were recorded. Results obtained from both pot and field experiments revealed that rice yields were at par in AWD and SC but yields were lower in MC treatment. With N fertilizer, higher yields were observed with 90 kg N/ha. The interaction effect of submerged with 90 kg N/ha gave the highest grain yield. N fertilizer effect on water use and water productivity was ranked as N2 > N1 > N0 while water management effect on water use and water productivity was ranked in this order: SC > AWD > MC and MC > AWD > SC respectively.

Impact of the synergy between technology management and technological capability on new product development:a system dynamics approach

This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management and technological capability has positive impact on new product development.Moreover, the leading synergy processes between technology management and technological capability in different new product development stages are different.This paper deepens the theoretical understanding of how to achieve new product development, and also provides useful guidance for firms to implement new product development.

Digital Twin-based Quality Management Method for the Assembly Process of Aerospace Products with the Grey-Markov Model and Apriori Algorithm

The assembly process of aerospace products such as satellites and rockets has the characteristics of single-or small-batch production,a long development period,high reliability,and frequent disturbances.How to predict and avoid quality abnormalities,quickly locate their causes,and improve product assembly quality and efficiency are urgent engineering issues.As the core technology to realize the integration of virtual and physical space,digital twin(DT)technology can make full use of the low cost,high efficiency,and predictable advantages of digital space to provide a feasible solution to such problems.Hence,a quality management method for the assembly process of aerospace products based on DT is proposed.Given that traditional quality control methods for the assembly process of aerospace products are mostly post-inspection,the Grey-Markov model and T-K control chart are used with a small sample of assembly quality data to predict the value of quality data and the status of an assembly system.The Apriori algorithm is applied to mine the strong association rules related to quality data anomalies and uncontrolled assembly systems so as to solve the issue that the causes of abnormal quality are complicated and difficult to trace.The implementation of the proposed approach is described,taking the collected centroid data of an aerospace product’s cabin,one of the key quality data in the assembly process of aerospace products,as an example.A DT-based quality management system for the assembly process of aerospace products is developed,which can effectively improve the efficiency of quality management for the assembly process of aerospace products and reduce quality abnormalities.

A Domain Engineering Approach to Increase Productivity in the Development of a Service for Changes Notification of the Configuration Management Database

This paper presents a domain engineering approach to build a software product line that supports the change notification service in a Configuration Management Database (CMDB) according to the Information Technology Infrastructure Library (ITIL) best practices. For the development of this product line, the proposed approach makes use of a construction of products methodology by analogy: this is a new notation which reports the variability of the products, obtaining metrics as important as the number of products and uses a language that enables, by means of the flexibilization of a product and the development of some generators, to build the rest of the product line. In addition the paper offers a standard for the analysis and design of the CMDB as well. Finally, the paper presents an economic model for the product line, where the profitability and productivity of the proposed solution are analyzed.

System View of Product Data Management and Its Application

A product data management system for a manufacturing enterprise is to make sure that the proper product data can be communicated to the right people at the right time.This paper describes a system analysis paradigm for data analysis in a product data management(PDM)development.Three aspects of the paradigm,i.e.,function,structure and behavior are rep- resented.The use of the paradigm explains why so many kinds of objects are necessary in a commercial database matrix and what models are available for developing a PDM application.As another result,a lot of models are derived from the analysis of product data system paradigm to model product data and PDM database definitions.

Research on a Product Information Management System Facing Remanufacture Engineering

Remanufacture Engineering is an important characteristic and development trend of a manufacturing system in the 21st Century, and product information management is very important to Remanufacture Engineering. In this paper, we first compared traditional manufacturing and remanufacturing. Then, according to the features of Remanufacture Engineering, we analyzed the request of product information management system facing Remanufacture Engineering, and designed the system module. Finally, we built a kind of system structure of product information management facing Remanufacture Engineering and gave realization methods based on Web.

Knowledge-reuse-oriented Product Modeling and Knowledge Management in Digital Design

Mostly product design knowledge and experience exists in design handbook or expert’s brain. During design process,designer has to refer to many handbooks and design materials,and design solution is hard to be reused. In order to deal with these deficiencies in digital design,this paper focuses on knowledge-reuse-oriented product modeling and knowledge management. Design knowledge is used to guide design process,and it is embedded into product model along with design process. Through analyzing design process,mechanical product knowledge is classified into four basic types that include calculation formula,design rule,engineering check and parameter spectrum etc. In order to manage and encapsulate design knowledge the concept of knowledge component(KCOM) is proposed. Design knowledge base can be organized as a hierarchy tree of KCOM. Knowledge reuse in KCOM level is the reuse of whole object in knowledge base,and knowledge reuse in item level is the reuse of basic knowledge type. Finally knowledge reuse approaches between knowledge base and CAD system is presented.

The Development of the Production Management and Control System for 10th Assembly Workshop under XAC-CIMS

This paper gives brief introduction to the production management and control system (PMCS) for 10th assembly workshop under Xi’ an Aircraft Company (XAC)--CIMS. Its user requirements 9 structure, ftinctions, and implementation are described. It is showed that the development problems of PMCS can be further reduced to a development methodology for Chinese enterprises, which will make them competitive.

An Open Architecture and Implementation for Product Data Management

In this paper, an open architecture and its implementation for product data management are presented. The system architecture, product data definition model, and a set of components of the architecture are discussed in detail. Especially, the principle and some mechanism of one of the components, an object oriented database management system GH-EODB, are discussed in more detail. The architecture is extensible and adaptable.