Assessing the effects of site factors on the productivity of a feller buncher:a time and motion analysis

We evaluated,for the first time in Turkey,the productivity of a feller buncher during clear-cut operations of two Brutian pine stands located in Canakkale,northwestern Turkey with different diameter classes and terrain conditions.In the first stand with 24.6 cm average DBH,the feller buncher cut full trees and moved them to roadside.In the second stand with 34.3 cm average DBH,the feller buncher cut trees in two stages due to their larger diameters and the relatively steep and rough terrain conditions of the site.The effects of specific stand features,DBH and tree height measurements were assessed through statistical analysis in relation to productivity.The results indicate that the average productivity for the first stand was about 118 m^3h^-1,while it was about 80 m3h-1 in the second stand.Even though tree diameter and volume were higher in the second stand,productivity decreased by32.3%due to extra time spent on the two-stage cutting operation.The results revealed that harvesting operations should be planned carefully and the right equipment selected by accounting for different tree sizes,terrain conditions and machine specifications in order to better understand their effects on production.

MIP Formulations and Metaheuristics for Multi-Item Capacitated Lot-Sizing Problem with Non-Customer Specific Production Time Windows and Setup Times

Our research focuses on the development of two cooperative approaches for resolution of the multi-item capacitated lot-sizing problems with time windows and setup times (MICLSP-TW-ST). In this paper we combine variable neighborhood search and accurate mixed integer programming (VNS-MIP) to solve MICLSP-TW-ST. It concerns so a particularly important and difficult problem in production planning. This problem is NP-hard in the strong sense. Moreover, it is very difficult to solve with an exact method;it is for that reason we have made use of the approximate methods. We improved the variable neighborhood search (VNS) algorithm, which is efficient for solving hard combinatorial optimization problems. This problem can be viewed as an optimization problem with mixed variables (binary variables and real variables). The new VNS algorithm was tested against 540 benchmark problems. The performance of most of our approaches was satisfactory and performed better than the algorithms already proposed in the literature.

ANALYSIS AND IMPROVEMENT OF LEAD TIME FOR JOB SHOP UNDER MIXED PRODUCTION SYSTEM

Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to those from a shop with one-piece transfer lots. Next, a mathematical programming model for minimizing lead time in the mixed-model job shop is presented, in which one-piece transfer lots are used. Key factors affecting lead time are found by analyzing the sum of the longest setup time of individual items among the shared processes （SLST） and the longest processing time of individual items among processes （LPT）. And lead time can be minimized by cutting down the SLST and LPT. Reduction of the SLST is described as a traveling salesman problem （TSP）, and the minimum of the SLST is solved through job shop scheduling. Removing the bottleneck and leveling the production line optimize the LPT. If the number of items produced is small, the routings are relatively short, and items and facilities are changed infrequently, the optimal schedule will remain valid. Finally a brief example serves to illustrate the method.

Research on Reduction of Solar Power Curtailment with Grid Connected Energy Storage System Based on Time-Series Production Simulation

Due to the variable output of renewable energy (RE) generation, difficulties of dispatching RE for power system operators could not be avoided. One of possible solutions is the energy storage technology, especially the battery storage system. The large-scale energy storage system is available to support power system reliable flexibility for load following and system frequency regulation. In this paper, the bottlenecks of large-scale solar power generation dispatching and operation in Qinghai grid are discussed, and a new PV-energy storage coordinated dispatching method is proposed for reduction of PV curtailment in Qinghai. Moreover, the validation based on the time-series production simulation is provided using real data from Qinghai. The results indicate that the proposed method can effectively decrease the curtailment of solar power and future vision of large-scale solar power coordinated operation with energy storage system is also presented.

Switchable down-,up-and dual-chirped microwave waveform generation with improved time–bandwidth product based on polarization modulation and phase encoding

A switchable down-,up-and dual-chirped microwave waveform generation technique with improved time–bandwidth product(TBWP)is proposed and demonstrated based on a dual-polarization dual-parallel Mach–Zehnder modulator(DPDPMZM)cascaded with a polarization modulator(Pol M).By properly controlling the phase shifts of the radio frequency signals applied to the DP-DPMZM,switchable down-,up-and dual-chirped waveforms with simultaneous frequency and bandwidth doubling can be generated.To enlarge the TBWP further,splitting parabolic signal and phase-encoding splitting parabolic signal are used to drive the Pol M for the enhancement of bandwidth and time duration.Numerical results demonstrate the generation of down-,up-and dual-chirped microwave waveform with TBWP of 8,160 and 10240.The proposed method may find applications in future multifunction radar systems due to the high performance and flexibility.

National Plan for Non-ferrous Metals Production Fulfilled ahead of Time

Vice president of China National Nonferrous Metals Industries Corporation Mr. WoTingshu said:"The output of 10 kinds of nonferrous metals amounted to 2.45 Mt." This factmean1s that the national plan for nonferrous metals production fulfiled earlier. The 10 kinds ofnonferrous metals are aluminium, magnesium, lead, zinc, copper, tin, nickel, antimony mercuryand titanium.

Distribution, residence time, autotrophic production, and heterotrophic removal of DOP in the Mirs Bay, northern South China Sea

The importance of dissolved organic phosphorus(DOP) as a potential nutrient source for primary producers in marine systems has been recognized for up to eight decades, but currently, the understanding of the biogeochemistry of DOP is in its infancy. In the present study, monthly data between 2000 and 2014 were used to analyze the temporal and spatial distributions of DOP in the Mir Bay, the northern South China Sea. The DOP residence time(TDOP) was also investigated using a simple regression analysis in combination with chlorophyll a(Chl a) measurements while excess DOP(ΔDOP), produced by the biogeochemical processes of autotrophic production and heterotrophic removal, was determined using a two-component mixing mass-balance model in combination with salinity measurements. The results showed that the DOP concentration was(0.017±0.010) mg/L higher in the surface-water compared with the bottom-water and higher in the inner Tolo Harbour and waters adjacent to Shatoujiao compared with the main zone of the bay. Although seasonal changes and annual variability in the DOP were small, the surface DOP concentration was higher in the wet season(April–September)than in the dry season(October–March) due to the impacts of seaward discharges and atmospheric deposition into the bay. Measurement and regression results showed that the DOP release rate from phytoplankton production was about 1.83(gP)/(gChl a) and the TDOP was about 7 d, which implied that the DOP cycle in the bay was rapid. The ΔDOP was calculated from the model to be about 0.000 mg/L in the main zone of the bay and about 0.002 mg/L in the inner Tolo Harbour and waters adjacent to Shaotoujiao, suggesting that the autotrophic production of DOP was almost balanced by the heterotrophic removal in the main zone of the bay and dominated in the inner Tolo Harbour and waters adjacent to Shaotoujiao. In conclusion, the Mirs Bay is very productive and fairly heterotrophic.

Data-driven approaches for time series prediction of daily production in the Sulige tight gas field, China

The Sulige tight gas field is presently the largest gas field in China.Owing to the ultralow permeability and strong heterogeneity of the reservoirs in Sulige,the number of production wells has exceeded 3,000,keeping the stable gas supply in the decade.Thus,the daily production prediction of gas wells is significant for monitoring production and for implementing and evaluating stimulation measures.Therefore,on the basis of the three datadriven time series approaches,the daily production of 1692 wells over 10 years was mining for the daily production prediction of wells in Sulige.The jointed deep long short-term memory and fully connected neural network(DLSTM-FNN)model was proposed by introducing the recurrent neural network's sequential expression ability and was compared with random forest(RF)and support vector regression(SVR).After the daily production predictions of thousands of wells in Sulige,the proposed DLSTM-FNN model significantly improved the time series prediction accuracy and efficiency in the short training samples and had strong availability and practicability in the Sulige tight gas field.

Analysis of the Main Factors Influencing Food Production in China Based on Time Series Trend Chart

Based on the annual sample data on food production in China since the reform and opening up,we select 8 main factors influencing the total food production( growing area,application rate of chemical fertilizer,effective irrigation area,the affected area,total machinery power,food production cost index,food production price index,financial funds for supporting agriculture,farmers and countryside),and put them into categories of material input,resources and environment,and policy factors. Using the factor analysis,we carry out the multi-angle analysis of these typical influencing factors one by one through the time series trend chart. It is found that application rate of chemical fertilizer,the growing area of food crops and drought-affected area become the key factors affecting food production. On this basis,we set forth the corresponding recommendations for improving the comprehensive food production capacity.

Water Requirement Rules and Production of Highland Barley in Different Sowing Time and Irrigation Levels

Water requirement rules and production of highland barley in different sowing time and irrigation levels were studied according to the data in field trial of 2016-2017.Based on analyzing the experimental results,the optimal irrigation scheduling and amount in the growth period of highland barley were proposed,which was of great significance to the unification of water saving and high yield of highland barley in the arid agricultural area of Tibet.

Fabrication scheduling on a single machine to minimize the weighted sum of product completion time

In this paper, a fabrication scheduling problem concerning the production of components at a single manufacturing facility was studied, in which the manufactured components are subsequently assembled into a finite number of end products. Each product was assumed to comprise a common component to all jobs and a unique component to itself. Common operations were processed in batches and each batch required a setup time. A product is completed when both its two operations have been processed and are available. The optimality criterion considered was the minimization of weighted flow time. For this scheduling problem, the optimal schedules were described in a weignted shortest processing time first （WSPT） order and two algorithms were constructed corresponding to the batch availability and item availability, respectively.

Multi-subpulse process of large time-bandwidth product chirp signal

To prevent the long-time coherent integration and limited range window stumbling blocks of stretch processing and reduce computational complexity, a novel method called multi-subpulse process of large time-bandwidth product linear frequency modulating （ LFM ） signal （ i. e. chirp ） is proposed in this paper. The wideband chirp signal is split up into several compressed subpulses. Then the fast Fourier transform （FFT） is used to reconstruct the high resolution range profile （ HR- RP） in a relative short computation time. For multi-frame, pulse Doppler （PD） process is performed to obtain the two-dimension range-Doppler （R-D） high resolution profile. Simulations and field ex- perimental results show that the proposed method can provide high-quality target profile over a large range window in a short computation time and has the promising potential for long-time coherent in- tegration.

A Time Dependent Inventory Model for Exponential Demand Rate with Constant Production Where Shelf-Life of the Product Is Finite

In this paper a time dependent inventory model is developed on the basis of constant production rate and market demands which are exponentially decreasing. It advances in quest of total average optimum cost considering those products which have finite shelf-life. The model also considers the small amount of decay. Without having any sort of backlogs, production starts. Reaching at the desired level of inventories, it stops production. After that due to demands along with the deterioration of the items it initiates its depletion and after certain periods the inventory gets zero. The decay of the products is level dependent. The objective of this paper is to find out the optimum inventory cost and optimum time cycle. The model has also been justified with proving the convex property and by giving a numerical example.

Photonics Improvement of the Time-Bandwidth Product for a Linearly Chirped Waveform

A photonics approach to generate a linearly chirped waveform with increased TBWP is proposed and investigated. The time bandwidth product (TBWP) of the linearly chirped waveform is improved based on optical microwave frequency multiplying combined with temporal synthesis. An integrated dual-polarization modulator and an optical filter are utilized to perform frequency doubling operation by generating an orthogonally polarized optical signal, which consists of an optical carrier in one polarization direction and a second-order chirped optical sideband in another. Then the orthogonally polarized optical signal puts into a polarization modulator (PolM) to perform phase coding process. By driving a Pseudorandom (PN) sequence to the PolM, the time duration of the generated bandwidth doubled linearly chirped waveform can be synthesized to arbitrary length. The approach is verified by simulation. A linearly chirped waveform with central frequency of 8.25 GHz, bandwidth of 500 MHz, time duration of 6.4 ns is used to generate a synthesized waveform with central frequency of 16.5 GHz, bandwidth of 1 GHz, time duration of 819.2 ns. The TBWP of the linearly chirped signal is improved from 3.2 to 819.2. The proposed method features arbitrary large TBWP, and it can be used in a radar system to improve its resolution.

Interrupted Time Series Analysis of Military and Civilian Regimes in Nigeria: A Statistical Evidence from Gross Domestic Product (GDP)

Governments influence the economy by changing the level and types of taxes, the extent and composition of spending, and the degree and form of borrowing. Governments directly and indirectly influence the way resources are used in the economy. Higher taxes, fees, and greater regulations can stymie businesses or entire industries and the resulting impact is reflected on the country’s economy status (strong or weak). The growth rate of GDP is often used as an indicator of the general health of the economy. In broad terms, an increase in real GDP is interpreted as a sign that the economy is doing well. So it is important to study and pay more attention to country’s GDP growth rate. In this paper, an intervention analysis approach was applied to Nigeria GDP data in order to evaluate the performances of military and civilian rules in the country. Data on Nigeria GDP were collected and subjected to interrupted (intervention) time series model. Based on the Alkaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and sigma2 values, the interrupted time series model ARIMA (1, 1, 0) with exogenous variables (per capita per capita GDP, intervention, year and yearAfter) was identified as the best model amongst other competing models. It was observed that the intervention (civilian rule) was significant at the 10% level of significance in increasing the Nigeria GDP by 10B US$ on the average since 2005 till 2021 while controlling for the effects of other determinants. Also, the ARIMA (1, 1, 0) forecasts indicate that the Nigeria GDP will continue increasing during the civilian rule. As a result, changing from military rule to civilian rule in Nigeria significantly increased the GDP of the country.

Interrupted Time Series Analysis of Military and Civilian Regimes in Nigeria: A Statistical Evidence from Gross Domestic Product (GDP)

Governments influence the economy by changing the level and types of taxes, the extent and composition of spending, and the degree and form of borrowing. Governments directly and indirectly influence the way resources are used in the economy. Higher taxes, fees, and greater regulations can stymie businesses or entire industries and the resulting impact is reflected on the country’s economy status (strong or weak). The growth rate of GDP is often used as an indicator of the general health of the economy. In broad terms, an increase in real GDP is interpreted as a sign that the economy is doing well. So it is important to study and pay more attention to country’s GDP growth rate. In this paper, an intervention analysis approach was applied to Nigeria GDP data in order to evaluate the performances of military and civilian rules in the country. Data on Nigeria GDP were collected and subjected to interrupted (intervention) time series model. Based on the Alkaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and sigma2 values, the interrupted time series model ARIMA (1, 1, 0) with exogenous variables (per capita per capita GDP, intervention, year and yearAfter) was identified as the best model amongst other competing models. It was observed that the intervention (civilian rule) was significant at the 10% level of significance in increasing the Nigeria GDP by 10B US$ on the average since 2005 till 2021 while controlling for the effects of other determinants. Also, the ARIMA (1, 1, 0) forecasts indicate that the Nigeria GDP will continue increasing during the civilian rule. As a result, changing from military rule to civilian rule in Nigeria significantly increased the GDP of the country.

Minimal Generalized Time-Bandwidth Product Method for Estimating the Optimum Fractional Fourier Order

A minimal generalized time-bandwidth product-based coarse-to-fine strategy is proposed with one novel ideas highlighted: adopting a coarse-to-fine strategy to speed up the searching process. The simulation results on synthetic and real signals show the validity of the proposed method.

A Real-time Concurrent Product and Process Design System for Mechanical Parts

A real time concurrent product and process design system for mechanical parts is described in this paper. It consists of integrated product model, the expert system of product manufacturability evaluation and the controller of concurrent design. With the help of the controller of concurrent design, each feature of a part can be designed and evaluated based on manufacturing knowledge and resources, and can be modified according to the results of evaluation. The machining method of design feature can be selected based on manufacturing knowledge. So real time concurrent product and process design can be implemented based on integrated product model that is established based on generalized feature. Products and its design process can be optimized with the help of this system. The information and function integration of product design process can be realized. The time to market and the cost of products can be reduced.

Comparison of Two Real-time PCR Technigues for Quantification of GMO Contents in Highly Processed Products of Soybean

The RR soybean was quantitatively detected by ABI Prism 7300 sequence detector with PCR primers and fluorescence probes were designed according to the sequences of endogenous Lectin gene and exogenous CP4-EPSPS gene, and the PCR systems were based on SYBR Green I and TaqMan. The standard curve of ACt between CP4-EPSPS gene and Lectin gene of the RR soybean in standard materials was generated and a linear regression equation was obtained. Quantification methods were optimized through two different real-time PCR chemistries, i.e. SYBR Green I and TaqMan, and the RR soybean contents were quantified in five standard samples and seven highly processed products by the two assays. Both methods are proved to be specific, highly sensitive and reliable for both identification and quantification of soybean DNA. The results indicate that the two optimized PCR system can be used for the practical quantitative detection of RR soybean in highly processed products.

Knowledge Management of Software Productivity and Development Time

In this paper, we identify a set of factors that may be used to forecast software productivity and software development time. Software productivity was measured in function points per person hours, and software development time was measured in number of elapsed days. Using field data on over 130 field software projects from various industries, we empirically test the impact of team size, integrated computer aided software engineering (ICASE) tools, software development type, software development platform, and programming language type on the software development productivity and development time. Our results indicate that team size, software development type, software development platform, and programming language type significantly impact software development productivity. However, only team size significantly impacts software development time. Our results indicate that effective management of software development teams, and using different management strategies for different software development type environments may improve software development productivity.