Does ash dieback affect the reproductive ecology of Fraxinus excelsior L.?

Forest tree species reproduction is a key factor in maintaining the genetic diversity of future generations and the stability of forest ecosystems.The ongoing ash dieback disease could affect the reproductive ecology of Fraxinus excelsior L.and have a major impact on the quantity and quality of pollen and seeds.In this study,we investigated pollen production and viability of pollen and seeds of ash trees with different health status from 2018 to 2022.Inflorescences were collected from 105 trees(pollen production),pollen from 125 trees(pollen viability),and seeds from 53 trees(seed quality)in two seed orchards and in one floodplain forest in southern Germany.Not all parameters were examined at every site every year.The average pollen production per tree was estimated at 471.2±647.9 billion pollen grains.In addition,we found that a high number of inflorescences did not equate to high pollen production per inflorescence.Pollen production of healthy and diseased trees did not differ significantly,although only 47%of severely diseased male trees(vs.72%for healthy trees)produced flowers.With regards to pollen viability,the TTC test showed an average viability of 73%±17%.Overall,there was a slight tendency for diseased trees to have less viable pollen.However,a significant difference could only be calculated for trees in the floodplain forest.The percentage of germinable seeds in 2018 was 38%in the floodplain forest and 57%in one of the seed orchards.The percentage of viable seeds(TTC test)ranged from 17 to 22%in the orchards in 2020.Non-viable seeds were usually heavily infested by insects.In general,seed quality was not significantly different between healthy and diseased trees.Our results indicate that ash dieback affects flower formation and pollen viability but not pollen production or seed quality.Nevertheless,the fact that hardly any flowering was observed,especially for trees that were seriously affected,suggests a negative effect of ash dieback on reproductive performance.Thus,severely diseased trees will transfer their genes to a smaller extent to the next generation.

Diverse foraging strategies of breeding Swinhoe's Storm-petrel in the productive marginal sea of the Northwest Pacific

Understanding the foraging behavior is essential for investigating seabird ecology and conservation,as well as monitoring the well-being of the marine environment.Breeding seabirds adopt diverse foraging strategies to maximize energy gains and cope with the intensified challenges of parenting and self-maintenance.Such tradeoff may stem from the heterogeneity of food resources and the constraints of central place foraging.Nevertheless,abundant marine productivity could alleviate the energy limitation for seabirds,resulting in a consistent foraging approach.Here,we investigated the foraging strategy during the breeding season of a cryptic small-sized seabird,Swinhoe’s Storm-petrel(Hydrobates monorhis),in the Yellow Sea,a productive marginal sea of the Northwest Pacific.Using GPS tracking,we evaluated habitat preference,quantified the foraging strategy,and tested if environmental conditions and individual traits influence foraging trips.We found that Swinhoe’s Storm-petrels preferred nearshore areas with shallow water and engaged in primarily short foraging trips.Distinctive southeastward and southwestward strategies emerged when combining trip metrics,including foraging direction,duration,and maximum distance.The bathymetry,proximity to the coastline,and sea surface temperature differed in two foraging strategies.Foraging strategies exhibited flexibility between individuals,potentially explained by wing morphology,in which longer-winged birds are more likely to embark on longer-distance foraging trips.These findings highlight the impact of environmental factors and individual traits on seabirds’foraging decisions in productive marginal sea ecosystems.Our study also provides valuable insights into the foraging ecology of this Asian endemic storm-petrel.

NEW QUALITY PRODUCTIVE FORCES SPUR GLOBAL DEVELOPMENT

The third plenary session of the 20th Central Committee of the Communist Party of China(CPC)in July was in the global spotlight for the reform measures it proposed to advance Chinese modernization.The plenum decided to improve the institutions and mechanisms for fostering new quality productive forces in line with local conditions and pinpointed the key areas.

In the Era of New Quality Productive Forces,How Can Cosmetics Enterprises Go with the Trend?

In 2024,a new mode of high-quality development and revolutionary innovation with“new quality productive forces”as the core is sweeping rapidly across China,involving traditional,emerging,future and many other industries.There is no exception to cosmetics production.Tendency:New quality productive forces as a new topicThe new quality productive force,highlighting“innovation”and“quality”,is an advanced productivity ecology with high-technology,high-efficiency and high-quality features,which has broken through the traditional economic growth mode and productivity development path,and conforms to the new development philosophy.

New Quality Productive Forces Spur Global Development

China’s new quality productive forces theory and actions are a Chinese solution for win-win cooperation and common development by sharing development opportunities.THE third plenary session of the 20th Central Committee of the Communist Party of China(CPC)in July was in the global spotlight for the reform measures it proposed to advance Chinese modernization.The plenum decided to improve the institutions and mechanisms for fostering new quality productive forces in line with local conditions and pinpointed the key areas.The reforms will give impetus to both China’s development and common global prosperity.China’s new quality productive forces theory and actions taken vis-à-vis them indicate the development path of Chinese socialism and are a Chinese solution for win-win cooperation and common development by sharing development opportunities.

Strategies and Economic Benefit Analysis for Productive Landscape of Rape Flower Sea in Cold Regions

The cold regions are located in high latitudes and cold climates.The local excellent ornamental plant resources are relatively scarce.The plant species that are suitable for both ornamental and productive benefits of landscape of flower sea construction are also even fewer.Therefore,it is imperative to introduce and screen the plant resources suitable for cold regions to create the landscape of flower sea.The rape,an oilseed crop,was used as a research object in order to create a productive flower landscape with both ornamental and economic values in cold regions.Four rape flower varieties,Qingza No.5,7,9,and 11,were introduced from Qinghai Hufeng Agricultural Science and Technology Group Co.,Ltd.They were planted in the experimental practice base of Northeast Agricultural University in three batches.Development characteristics and seed yield of rape flowers on different sowing dates were studied.The fuzzy probability method was used to comprehensively evaluate the varieties.The results showed that the rape flowers grew well in Harbin City during the experimental sowing period,which could form a good landscape of flower sea and had a considerable rapeseed yield.It could be widely used in cold urban and rural areas,such as Harbin City.In view of the experimental results,the strategies of creating a productive landscape of rape flower sea were proposed and the economic benefits were analyzed.It could change the status quo of a uniform landscape of flower sea in cold regions,help the development of rural tourism,and promote local economic income.

An Intelligent Turn With a focus on innovation and digitisation,the new quality productive forces will have far-reaching impact on the society

Chinese President Xi Jinping has put forward a series of theoretical explanations on new quality productive forces.He has stressed that high-quality development has to be supported by a new productivity theory.Since new productive forces have emerged and played a strong role in driving and supporting high-quality development,they should be theorised systematically to guide further development.

International Perspective of Understanding the New Quality Productive Forces

Developing the new quality productive forces is an inherent requirement and an important focus for promoting high-quality development. However, it is not enough to understand the whole picture merely from a domestic perspective. The concept of new quality productive forces was put forward due to the changes in the international environment, including the emergence of anti-globalization trends and the economic policies of some major economies that are less open than before. With the changes in the global economic concept, China's economic development needs its innovative theory. As the world's second-largest economy, China is committed to the development of new quality productive forces and will make significant contributions to global development. In theory, it shows direction for the development of new quality productive forces on a global scale. In practice, it provides experiences for other economies to develop new quality productive forces. It also helps address the common challenges facing global development. The competition between major countries in traditional fields will continue, but in the case of the development of new quality productive forces, it will show some new characteristics. It will be more reflected in the field of strategic emerging industries, the confrontation risk in major country rivalry will be reduced, and strategic planning and design will become more important.

Research on Key Points of Design of Standard Plants in Modern Industrial Parks Under the Background of Promoting the Development of New Quality Productive Forces

With the progress of science and technology and the acceleration of industrialization,the modern industrial park is an important carrier of industrial development.The importance of its standard plant design has become increasingly prominent.With the development of new quality productive forces as the background,this research deeply discusses the key points of standard plant design in modern industrial parks.This paper uses literature review and case analysis to systematically analyze the important role of standard plant design in developing new quality productive forces in modern industrial parks and puts forward suggestions for optimizing design.It is found that the rationality,intelligence,and environmental protection of plant design are the key factors affecting the development of new quality productive forces.The paper summarizes the core points of modern industrial park standard plant design to provide a reference for the future development of related industries.

Mechanical Modeling and Analysis of Stability Deterioration of Production Well During Marine Hydrate Depressurization Production

Different from oil and gas production,hydrate reservoirs are shallow and unconsolidated,whose mechanical properties deteriorate with hydrate decomposition.Therefore,the formations will undergo significant subsidence during depressurization,which will destroy the original force state of the production well.However,existing research on the stability of oil and gas production wells assumes the formation to be stable,and lacks consideration of the force exerted on the hydrate production well by formation subsidence caused by hydrate decomposition during production.To fill this gap,this paper proposes an analytical method for the dynamic evolution of the stability of hydrate production well considering the effects of hydrate decomposition.Based on the mechanical model of the production well,the basis for stability analysis has been proposed.A multi-field coupling model of the force state of the production well considering the effect of hydrate decomposition and formation subsidence is established,and a solver is developed.The analytical approach is verified by its good agreement with the results from the numerical method.A case study found that the decomposition of hydrate will increase the pulling-down force and reduce the supporting force,which is the main reason for the stability deterioration.The higher the initial hydrate saturation,the larger the reservoir thickness,and the lower the production pressure,the worse the stability or even instability.This work can provide a theoretical reference for the stability maintaining of the production well.

Single-base editing in IGF2 improves meat production and intramuscular fat deposition in Liang Guang Small Spotted pigs

Background Chinese indigenous pigs are popular with consumers for their juiciness,flavour and meat quality,but they have lower meat production.Insulin-like growth factor 2(IGF2) is a maternally imprinted growth factor that promotes skeletal muscle growth by regulating cell proliferation and differentiation.A single nucleotide polymorphism(SNP) within intron 3 of porcine IGF2 disrupts a binding site for the repressor,zinc finger BED-type containing 6(ZBED6),leading to up-regulation of IGF2 and causing major effects on muscle growth,heart size,and backfat thickness.This favorable mutation is common in Western commercial pig populations,but absent in most Chinese indigenous pig breeds.To improve meat production of Chinese indigenous pigs,we used cytosine base editor 3(CBE3)to introduce IGF2 intron3-C3071T mutation into porcine embryonic fibroblasts(PEFs) isolated from a male Liang Guang Small Spotted pig(LGSS),and single-cell clones harboring the desired mutation were selected for somatic cell nuclear transfer(SCNT) to generate the founder line of IGF2^(T/T) pigs.Results We found the heterozygous progeny IGF2^(C/T) pigs exhibited enhanced expression of IGF2,increased lean meat by 18%-36%,enlarged loin muscle area by 3%-17%,improved intramuscular fat(IMF) content by 18%-39%,marbling score by 0.75-1,meat color score by 0.53-1.25,and reduced backfat thickness by 5%-16%.The enhanced accumulation of intramuscular fat in IGF2^(C/T) pigs was identified to be regulated by the PI3K-AKT/AMPK pathway,which activated SREBP1 to promote adipogenesis.Conclusions We demonstrated the introduction of IGF2-intron3-C3071T in Chinese LGSS can improve both meat production and quality,and first identified the regulation of IMF deposition by IGF2 through SREBP1 via the PI3KAKT/AMPK signaling pathways.Our study provides a further understanding of the biological functions of IGF2and an example for improving porcine economic traits through precise base editing.

Classification and technical target of water electrolysis for hydrogen production

Continuous efforts are underway to reduce carbon emissions worldwide in response to global climate change.Water electrolysis technology,in conjunction with renewable energy,is considered the most feasible hydrogen production technology based on the viable possibility of large-scale hydrogen production and the zero-carbon-emission nature of the process.However,for hydrogen produced via water electrolysis systems to be utilized in various fields in practice,the unit cost of hydrogen production must be reduced to$1/kg H_(2).To achieve this unit cost,technical targets for water electrolysis have been suggested regarding components in the system.In this paper,the types of water electrolysis systems and the limitations of water electrolysis system components are explained.We suggest guideline with recent trend for achieving this technical target and insights for the potential utilization of water electrolysis technology.

Upcycling plastic wastes into value-added products via electrocatalysis and photoelectrocatalysis

Plastic,renowned for its versatility,durability,and cost-effectiveness,is indispensable in modern society.Nevertheless,the annual production of nearly 400 million tons of plastic,coupled with a recycling rate of only 9%,has led to a monumental environmental crisis.Plastic recycling has emerged as a vital response to this crisis,offering sustainable solutions to mitigate its environmental impact.Among these recycling efforts,plastic upcycling has garnered attention,which elevates discarded plastics into higher-value products.Here,electrocatalytic and photoelectrocatalytic treatments stand at the forefront of advanced plastic upcycling.Electrocatalytic or photoelectrocatalytic treatments involve chemical reactions that facilitate electron transfer through the electrode/electrolyte interface,driven by electrical or solar energy,respectively.These methods enable precise control of chemical reactions,harnessing potential,current density,or light to yield valuable chemical products.This review explores recent progress in plastic upcycling through electrocatalytic and photoelectrocatalytic pathways,offering promising solutions to the plastic waste crisis and advancing sustainability in the plastics industry.

Quantifying the agreement and accuracy characteristics of four satellite-based LULC products for cropland classification in China

Various land use and land cover(LULC)products have been produced over the past decade with the development of remote sensing technology.Despite the differences in LULC classification schemes,there is a lack of research on assessing the accuracy of their application to croplands in a unified framework.Thus,this study evaluated the spatial and area accuracies of cropland classification for four commonly used global LULC products(i.e.,MCD12Q1V6,GlobCover2009,FROM-GLC and GlobeLand30)based on the harmonised FAO criterion,and quantified the relationships between four factors(i.e.,slope,elevation,field size and crop system)and cropland classification agreement.The validation results indicated that MCD12Q1 and GlobeLand30 performed well in cropland classification regarding spatial consistency,with overall accuracies of 94.90 and 93.52%,respectively.The FROMGLC showed the worst performance,with an overall accuracy of 83.17%.Overlaying the cropland generated by the four global LULC products,we found the proportions of complete agreement and disagreement were 15.51 and 44.72% for the cropland classification,respectively.High consistency was mainly observed in the Northeast China Plain,the Huang-Huai-Hai Plain and the northern part of the Middle-lower Yangtze Plain,China.In contrast,low consistency was detected primarily on the eastern edge of the northern and semiarid region,the Yunnan-Guizhou Plateau and southern China.Field size was the most important factor for mapping cropland.For area accuracy,compared with China Statistical Yearbook data at the provincial scale,the accuracies of different products in descending order were:GlobeLand30,FROM-GLC,MCD12Q1,and GlobCover2009.The cropland classification schemes mainly caused large area deviations among the four products,and they also resulted in the different ranks of spatial accuracy and area accuracy among the four products.Our results can provide valuable suggestions for selecting cropland products at the national or provincial scale and help cropland mapping and reconstruction,which is essential for food security and crop management,so they can also contribute to achieving the Sustainable Development Goals issued by the United Nations.

Associations between Sow Body Lesions with Body Condition and Subsequent Reproductive Performance

The objective was to determine the association between foot, leg, vulva and shoulder lesions with body condition and reproduction in group housed sows. Whiteline sows (n = 887) were measured before farrowing and at weaning at a commercial farm in eastern North Carolina. Foot and leg abnormalities included cracked hooves, toe length differences, overgrown hooves and locomotion. Vulva lesions were scored no lesion or lesion present. Shoulder lesions were scored no lesion, abrasion or open wound. Sow body condition measures included the Knauer sow caliper (CS), body weight (WT), visual body condition score (BCS), backfat (BF) and longissimus muscle area (LMA). Sow production traits included number born alive, litter birth weight, number weaned, litter weaning weight, piglet survival (number weaned ÷ (total number born + net transfer)), wean-to-conception interval and average daily lactation feed intake. Data were analyzed in SAS using PROC GLM for continuous traits and PROC GLIMMIX for categorical traits. Vulva lesions were recorded on 17.6% of sows at farrowing and 0% at weaning. No shoulder lesions, abrasions and open wounds were recorded on 100%, 0% and 0%, respectively, of sows at farrowing and 73%, 21% and 6%, respectively, at weaning. Foot and leg abnormalities were not associated with body condition or reproduction. Vulva lesions at farrowing were associated with lower CS, WT, BCS and BF at farrowing, and reduced piglet survival (4.3%). Lower CS at farrowing was associated with increased shoulder abrasions and open wounds at weaning. Backfat and BCS at farrowing had curvilinear associations with shoulder lesions at weaning, a BF of 39 mm and a BCS of 4.2 minimizing lesions. Results suggest vulva and shoulder lesions were associated with thinner sows at farrowing and vulva lesions at farrowing were associated with lower piglet survival.

Simulation of the Ecosystem Productivity Responses to Aerosol Diffuse Radiation Fertilization Effects over the Pan-Arctic during 2001–19

The pan-Arctic is confronted with air pollution transported from lower latitudes.Observations have shown that aerosols help increase plant photosynthesis through the diffuse radiation fertilization effects(DRFEs).While such DRFEs have been explored at low to middle latitudes,the aerosol impacts on pan-Arctic ecosystems and the contributions by anthropogenic and natural emission sources remain less quantified.Here,we perform regional simulations at 0.2o×0.2ousing a well-validated vegetation model(Yale Interactive terrestrial Biosphere,YIBs)in combination with multi-source of observations to quantify the impacts of aerosol DRFEs on the net primary productivity(NPP)in the pan-Arctic during 2001-19.Results show that aerosol DRFEs increase pan-Arctic NPP by 2.19 Pg C(12.8%)yr^(-1)under clear-sky conditions,in which natural and anthropogenic sources contribute to 8.9% and 3.9%,respectively.Under all-sky conditions,such DRFEs are largely dampened by cloud to only 0.26 Pg C(1.24%)yr^(-1),with contributions of 0.65% by natural and 0.59% by anthropogenic species.Natural aerosols cause a positive NPP trend of 0.022% yr^(-1)following the increased fire activities in the pan-Arctic.In contrast,anthropogenic aerosols induce a negative trend of-0.01% yr^(-1)due to reduced emissions from the middle latitudes.Such trends in aerosol DRFEs show a turning point in the year of 2007 with more positive NPP trends by natural aerosols but negative NPP trends by anthropogenic aerosols thereafter.Though affected by modeling uncertainties,this study suggests a likely increasing impact of aerosols on terrestrial ecosystems in the pan-Arctic under global warming.

Effects of Maillard reaction and its product AGEs on aging and age-related diseases

Maillard reaction(MR)is a non-enzymatic browning reaction commonly seen in food processing,which occurs between reducing sugars and compounds with amino groups.Despite certain advantages based on Maillard reaction products(MRPs)found in some food for health and storage application have appeared,however,the MR occurring in human physiological environment can produce advanced glycation end products(AGEs)by non-enzymatic modification of macromolecules such as proteins,lipids and nucleic acid,which could change the structure and functional activity of the molecules themselves.In this review,we take AGEs as our main object,on the one hand,discuss physiologic aging,that is,age-dependent covalent cross-linking and modification of proteins such as collagen that occur in eyes and skin containing connective tissue.On the other hand,pathological aging associated with autoimmune and inflammatory diseases,neurodegenerative diseases,diabetes and diabetic nephropathy,cardiovascular diseases and bone degenerative diseases have been mainly proposed.Based on the series of adverse effects of accelerated aging and disease pathologies caused by MRPs,the possible harm caused by some MR can be slowed down or inhibited by artificial drug intervention,dietary pattern and lifestyle control.It also stimulates people's curiosity to continue to explore the potential link between the MR and human aging and health,which should be paid more attention to for the development of life sciences.

Product quality prediction based on RBF optimized by firefly algorithm

With the development of information technology,a large number of product quality data in the entire manufacturing process is accumulated,but it is not explored and used effectively.The traditional product quality prediction models have many disadvantages,such as high complexity and low accuracy.To overcome the above problems,we propose an optimized data equalization method to pre-process dataset and design a simple but effective product quality prediction model:radial basis function model optimized by the firefly algorithm with Levy flight mechanism(RBFFALM).First,the new data equalization method is introduced to pre-process the dataset,which reduces the dimension of the data,removes redundant features,and improves the data distribution.Then the RBFFALFM is used to predict product quality.Comprehensive expe riments conducted on real-world product quality datasets validate that the new model RBFFALFM combining with the new data pre-processing method outperforms other previous me thods on predicting product quality.

High-rate electrochemical H_(2)O_(2) production over multimetallic atom catalysts under acidic–neutral conditions

Hydrogen peroxide(H_(2)O_(2))production by the electrochemical 2-electron oxygen reduction reaction(2e−ORR)is a promising alternative to the energy-intensive anthraquinone process,and single-atom electrocatalysts show the unique capability of high selectivity toward 2e−ORR against the 4e−one.The extremely low surface density of the single-atom sites and the inflexibility in manipulating their geometric/electronic configurations,however,compromise the H_(2)O_(2) yield and impede further performance enhancement.Herein,we construct a family of multiatom catalysts(MACs),on which two or three single atoms are closely coordinated to form high-density active sites that are versatile in their atomic configurations for optimal adsorption of essential*OOH species.Among them,the Cox–Ni MAC presents excellent electrocatalytic performance for 2e−ORR,in terms of its exceptionally high H_(2)O_(2) yield in acidic electrolytes(28.96 mol L^(−1) gcat.^(−1) h^(−1))and high selectivity under acidic to neutral conditions in a wide potential region(>80%,0–0.7 V).Operando X-ray absorption and density functional theory analyses jointly unveil its unique trimetallic Co2NiN8 configuration,which efficiently induces an appropriate Ni–d orbital filling and modulates the*OOH adsorption,together boosting the electrocatalytic 2e−ORR capability.This work thus provides a new MAC strategy for tuning the geometric/electronic structure of active sites for 2e−ORR and other potential electrochemical processes.

Research Progress and Prospects of Total Factor Productivity in the Construction Industry

The high-quality development of the construction industry fundamentally stems from the significant improvement of total factor productivity.Therefore,it is of crucial significance for promoting the development of the construction industry to a higher level by scientifically and accurately measuring the total factor productivity of the construction industry and deeply analyzing the influencing factors behind it.Based on a comprehensive consideration of research methods and influencing factors,this paper systematically reviews the existing relevant literature on total factor productivity in the construction industry,aiming to reveal the current research development trend in this field and point out potential problems.This effort aims to provide a solid theoretical foundation and valuable reference for further in-depth research,and jointly promote the continuous progress and development of total factor productivity research in the construction industry.