The Present Situation and Development Countermeasures for Meat Products Industry in Henan

This paper introduces the development and present situation of meat industry in Henan Province so as to get comprehensive understanding of this industry,including the advantages and insufficiencies of this industry,and then puts forward some countermeasures for the future development of the meat products of Henan Province,to realize the rapid,healthy and sustainable development of meat industry in Henan and create huge economic and social benefits in Henan.

An application of data envelopment analysis to investigate the efficiency of lumber industry in northwestern Ontario,Canada

This study aims at exploring the technical efficiency of lum- ber industry in northwestern Ontario, Canada using data envelopment analysis （DEA）. The DEA model analyzes relative technical efficiency of lumber mills with disproportionate inputs and outputs by dividing the 10- year time series data, for inputs and outputs of 24 lumber mills, over two periods （1999-2003 and 2004-2008）. Four inputs, namely, material （log volume）, labour （man-hours）, two types of energy （hog-fuel and electric- ity）, and one output （lumber volume） are used in this study. The trend analysis shows an annual reduction of 10%, 13% and 13% for lumber output, log consumption （input） and number of employees, respectively, during the period 1999-2008. The results from DEA with two scenarios with energy inputs and without energy inputs, for the two periods are found to be mixed and interesting. While some mills have improved their performance in terms of best use of available scarce inputs in the second period, some have shown negative per cent change in efficiency. In the with energy input and the without energy input scenario, some of the mills show a reduction in efficiency in the second period from the first period, with the highest estimated reductions of-13.9% and -47.6%, respectively. A possible explanation for these negative performances of mills in the latter period is the decline in production in the second period compared to the first period, where these mills were not able to adjust their inputs （mostly labour） as proportional lay-offs might not have been possible. These results provide policy makers and industry stakeholders with an improved understanding of the trends of efficiency and employ- ment as well as reallocation opportunities of future inputs in order to increase benefits from this sector.

Empirical Study on Customer Satisfaction Influencing Factors of Industry Application Products Based on Experiential Level Theory

The rapid development of industry application products has greatly influenced society. It has become essential for some telecommunication companies to focus on customer satisfaction with industrial products used by the government and enterprise customers. Following the review of a previous study of customer satisfaction and with the help of experiential level theory,this article attempts to establish a Satisfaction Factors Model for researching customer satisfaction with industry applications. We chose a product named "Mobile Monitor" and investigated the emotional satisfaction of 127 users and company leaders from different walks of life,and showed that 7 of the product's features affected the customers' overall emotional satisfaction. Lastly,this paper points out management implications of this application based on quantitative results. It presents a preliminary exploration program for customer satisfaction research in this specific field. The empirical research on a specific product based on experimental level theory may serve as a reference for other companies that desire to carry out similar surveys in future.

Analysis of China's sporting products industry based on the SCP framework

The SCP framework is a classical theory of industrial organization,which refers to the market structure,market conduct and market performance.This analysis is based on the SCP framework,choosing the current sporting products industry as object.Study found that China's sporting products industry's geographical layout has a"strong in South and East,weak in North and West"regional development trend,the proportion of abovedesignated enterprises is relatively low,rate of market concentration is not high,product homogenization remain quite serious.With high-speed technological progress and rapid scientific and technological updates,in the future,the sporting products industry will be reorganized according to the subdivision industries,getting rid of homogenization of competition and meeting the needs of consumers in smart wearable,health monitoring and other aspects.

An Analysis of Development Trend of Food Industry in Three Northeastern Provinces of China

The food industry has developed into a leading industry in Northeast China.However,various economic indicators have shown a significant downward trend in recent years.Through the systematic analysis of the development trend of food industry in Northeast China in the past ten years,especially in 2014,it is found that in the context of stable and smooth operation of the food industry in China,the efficiency of the main processing industries declines in the three northeastern provinces of China,there is a simultaneous decline in the share of output value of the leading industries in the output value of manufacturing sector in three provinces,the collective and individual capital withdrawal is obvious in the paid-up capital,and there is a simultaneous decline in the industrial production and sales rate and the export delivery value.The food industry in Northeast China has plunged into the dilemma of development.Finally,this article puts forward some targeted recommendations from aspects of policy making,industrial agglomeration and enterprise cultivation.

Small Optical Product Breeds Large Industry

China is the world’s largest consumer market for eyeglasses,with the total market volume reaching 80billion yuan.Accordingly,the market has a group of 800 million consumers demanding eyeglasses.The consumers are from different ages。

Liaoning Light Industry Products Im-Exp. Corp.

The Liaoning Light Industrial Products Import and Export Corporation founded in 1954 is the first legally recognized enterprise established in Northeast China. Liaoning province is the show place and gateway to North east China, and a bridge between Asia and Europe. The geographic location and the natural environment of the region with

Study on Innovation System and Innovation Strategy of Chinese Agricultural Product Processing Industry

The agricultural product processing industry is the inevitable choice for the agriculture to realize the industrialization, integration and modernization. Although the agricultural product processing industry has become the bright point in Chinese economy development, the whole development level falls behind the developed countries. The thesis brings up that the inherent reasons that Chinese agricultural product processing industry falls behind is that Chinese agricultural product processing industry has not an integrated industrial innovation system and has not a proper innovation strategy. So this thesis deeply discusses how to construct innovation system of Chinese agricultural product processing industry and puts forward the innovation strategy in order to improve the technology innovation capability and the development level.

New Thinking of Traditional Industry Development under the New Economic Condition——Classification of the Industry by the Management Mode of Nike

This paper has announced the arrival of new economic era through an analysis of Nike＇s management mode. The traditional industry classification can＇t meet demands of industry development. We should inherit and improve traditional economy in order to adapt to the development demand of new economy.

ZTE Rolls Out a Series of Industry's First TD-SCDMA Handset Products at PT/WIRELESS & NETWORKS COMM CHINA 2007

ZTE Corporation (ZTE), a leading global provider of telecommunications equipment and network solutions, unveiled

Main Results of an Energy Audit in a Milk Processing Industry in Taquara,Southern Brazil

The industrial energy diagnosis presented in this work occurred in a milk product cooperative, from an analysis of energy consumption in the main milk industrialization and a diagnosis of energy end uses of lighting and cooling systems. Almost all stages of milk industrialization are used hot water and steam generated in the boilers. The largest electricity consumption in this sector is by electric motors followed by cooling needed to maintain the quality of milk products. Because energy costs represent a significant portion of the monthly cost of the company, an analysis of the energy costs of the past two years to check the consumption of active and reactive energy and power demand contracted is performed. This paper presents the main results of an energy audit in a milk processing industry in southern Brazil.

Path Dependent Historical Development at Turkish Automotive Industry

Turkey’s automotive industry has begun to occur at a much earlier date compared to other developing countries,through licensing agreements to establish automotive industrial facilities,by importing a kind of technology.Attempts have been made in order to produce the domestic automobile road providing sectoral developments could enter another technology pathway.Moreover,the inventor of a very early date in the Fordist production system,such as 1929 by Ford Motor Company with the license agreement,as if he could provide for setting up production facilities in Istanbul’s company,this bad experience has refrained for years from entering as a manufacturer Ford Motor Turkey market.Thus,while Turkey is an attractive market for car production,on the other hand,sufficient improvement over time in the production of trucks and other automotive products,such as buses has not been achieved.The 1929 experience seems to have been effective in terms of Turkey.Because,it was necessary to wait until 1971 for OYAK and TOFAŞto establish automobile assembly facility with license agreements.With the start of production of two automotive industry facilities,there has been a significant increase in sectoral production figures,but this increase trend has not been sufficiently supported by the government through the incentive system and in the late 1970s the production of the automotive industry has declined.For the first time in 1961,efforts were made to produce a completely domestic automobile,although the prototype of the revolutionary car was successfully produced,mass production could not be started.Subsequently,the production of the Anadol automobile for the second time was tried by means of technology transfer from multiple sources and the serial production of this automobile continued for a while.However,since fiber glass bodywork was used instead of hair bodywork and export opportunities could not be found,production was stopped completely in the end of 1980s.In the 1980s,automobile production continued in two assembly plants and product diversification was carried out to increase the production volume.In the 1990s,three new assembly facilities,Honda,Toyota and Hyundai,were established and the number of assembly production facilities in the country increased to five and technology loyalty based on technology imports continued.Until 2014,the automotive industry continued to consist of five automobile assembly plants and other automotive products assembly plants.In 2015,it was announced to the public that a new domestic car prototype was produced.It was announced that the project will start mass production in 2019.However,it was determined that the prototype would be re-manufactured at the end of 2019 by making changes in the project and that it would be possible to start mass production in 2022.Thus,it is understood that the efforts to start mass production since 2015 can be concluded in 2022,i.e.7 years after the first prototype was produced.It can 161produce prototypes in a short period of four months in Turkey in 1961,as evidenced by an indication of the dependency on a long time wasting which is not technology importation pathway,such as five years.How to break the path of devotion demonstrates that it is a difficult job.Path dependency is thought to result from the education system.

The Impact of Digital Economy on Total Factor Productivity of China’s Service Industry

As a kind of integrated economy,digital economy has an important impact on the economic growth and production and lifestyle of multiple countries and regions,and plays a significant role in promoting the reconstruction of the international economic pattern.As an important industry of China’s national economy,the service industry is crucial to China’s economic growth.This paper measures the development level of digital economy in provinces and cities through constructing digital economy index system,uses super efficiency SBM-Malmquist model to measure total factor productivity of service industry,and tests the influence effect of digital economy on total factor productivity of Chinese service industry.Finally,the optimization path of digital economy on China’s service industry is proposed.

DEVELOP SERIES PRODUCTS OF ROBOTS TO PROMOTE THE TECHNOLOGICAL ADVANCEMENT OF THE MANUFACTURING INDUSTRY

As a typical representative and main technicalmeans of advanced manufacturing technology,robotic technology plays an important role in raisingan enterpse’s engineering level, improving its prod-uct quality and productivity, and realizing civilizedproduction. Currently, there are nearly one millionrobots of various kinds, which are employed widelyin different fields of manufacturing industry. Robot-ics is now one of the high technologies, which arecompetitively developed by the developed coun-

Protection of Innovative Achievements,Spatial Spillover,and Internal Structural Upgrading of the Productive Service Industry-Empirical Evidence from 28 Provinces in China

This study measured the level of innovation achievement protection and the degree of internal structural upgrading of the productive service industry in 28 provinces of China from 2000 to 2022.Exploratory spatial analysis methods were used to test the spatial correlation between the two variables,and the spatial impact of innovation achievement protection on the optimization of the internal structure of the productive service industry was examined at the national and sectoral levels.The results showed three main aspects of this system.(1)The agglomeration level of innovation achievement protection and internal structure optimization of the productive service industry between regions in China continued to increase during the sample period,and there was a clear similarity and synchronicity in the spatial evolution of the two variables.(2)The overall improvement in the protection level of innovative achievements is conducive to promoting the internal structural upgrading of China’s productive service industry.However,there are significant differences in the degree to which the protection of innovative achievements affects the internal structural upgrading of the productive service industry in the four major regions of the East,Central,Northeast,and West.The protection of innovative achievements in the East and Central regions significantly promotes the internal structural optimization of the productive service industry,while this effect is not significant in the western and northeastern regions.(3)The results of the robustness test indicate that the impact of internal structural upgrading of the productive service industry in the previous year on the level of innovation achievement protection is not significant.The interference from abnormal values of the internal structural upgrading of the productive service industry in various regions and the influence of municipalities directly under the central government on the regression results are not significant.After replacing the main variable,the coefficient of the innovation achievement protection level remained significantly positive.The conclusions of this study supplement and improve the theory of innovation achievement protection and industrial transformation and upgrading,providing decision-making support for improving the level of innovation achievement protection and promoting the internal structural upgrading of the productive service industries in China.

Anomaly Detection Method Using Feature Reconstruction Based Knowledge Distillation

In recent years,anomaly detection has attracted much attention in industrial production.As traditional anomaly detection methods usually rely on direct comparison of samples,they often ignore the intrinsic relationship between samples,resulting in poor accuracy in recognizing anomalous samples.To address this problem,a knowledge distillation anomaly detection method based on feature reconstruction was proposed in this study.Knowledge distillation was performed after inverting the structure of the teacher-student network to avoid the teacher-student network sharing the same inputs and similar structure.Representability was improved by using feature splicing to unify features at different levels,and the merged features were processed and reconstructed using an improved Transformer.The experimental results show that the proposed method achieves better performance on the MVTec dataset,verifying its effectiveness and feasibility in anomaly detection tasks.This study provides a new idea to improve the accuracy and efficiency of anomaly detection.

Identification of Sudanese Sesame Oil Quality Using a 680 nm Semiconductor Laser Spectrometer and Other Techniques

This study investigates the optical properties of sesame oil from traditional and industrial sources using a custom-designed semiconductor laser spectrometer, UV-Vis spectroscopy, and FTIR spectroscopy. Six samples were collected from traditional presses and factories in Khartoum State and White Nile State. The spectrometer, constructed with a 680 nm semiconductor laser and various resistor values, measured the absorbance of sesame oil samples. UV-Vis spectroscopy identified absorbance peaks at 670 nm and 417 nm, corresponding to chlorophyll a and b. FTIR analysis showed nearly identical spectra among the samples, indicating similar chemical compositions. Laser spectrometer analysis revealed specific absorbance values for each sample. The results highlight the feasibility of using a 680 nm semiconductor laser for analyzing sesame oil, providing a cost-effective alternative to other wavelengths. This study demonstrates the potential of integrating traditional methods with modern spectroscopic techniques for the quality assessment of sesame oil.

Heat-treated wood and its development in Europe

Efficient use of timber is a vital concern problem, especially in these regions where the forestry coverage ratio is decreasing. Studies on physical modification of wood have been taken more attention due to the increasing attentions on environmental protection. Thermal modification is emphasized and developed quickly in developing countries, especially in European countries. A large number of researches have been conducted and some industrial production plants have been built. This paper reviewed the history of heat treatment, exemplifies the industrial developments in several European countries, summarized the basic principle of heat treatment and describes the environmental characteristics. The properties of heat-treated wood and its usage are also summed up.

Regeneration Cultivation Technology of Flammulina velutipes in Factories

The research made a conclusion on different production chains of Flammulina velutipes and proposed regeneration method for cultivating Flammulina velutipes. The results indicated that with saw dusts, bran and corn flour as culture medium, when dry materials in bags reached 360 g, 450 g Flammulina velutipes would be produced and biotransformation efficiency can be 125%-128%. Additionally, the cultivated Flammulina velutipes proves better in quality and longer in shelflife, and the source of raw materials is not confined in a specific region, showing a promising prospect.