Programmable Logic Controller Block Monitoring System for Memory Attack Defense in Industrial Control Systems

Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.

Synthesis of Nonlinear Control of Switching Topologies of Buck-Boost Converter Using Fuzzy Logic on Field Programmable Gate Array (FPGA)

An intelligent fuzzy logic inference pipeline for the control of a dc-dc buck-boost converter was designed and built using a semi-custom VLSI chip. The fuzzy linguistics describing the switching topologies of the converter was mapped into a look-up table that was synthesized into a set of Boolean equations. A VLSI chip–a field programmable gate array (FPGA) was used to implement the Boolean equations. Features include the size of RAM chip independent of number of rules in the knowledge base, on-chip fuzzification and defuzzification, faster response with speeds over giga fuzzy logic inferences per sec (FLIPS), and an inexpensive VLSI chip. The key application areas are: 1) on-chip integrated controllers;and 2) on-chip co-integration for entire system of sensors, circuits, controllers, and detectors for building complete instrument systems.

Application of PLC programmable control technology in the mine pit transportation system

This paper summarizes the definition, function, and characteristics of the programmable conlrol technology, and especially analyzes the operation mode of the 750V DC traction power supply system, the protection setting the defects of the original system and the factors influencing the safety of power supply. Aimed at the equipment of the PLC programmable control system used in the mine transportation system in recent years, combining parts of the PLC programmable control system equipment used and installed in Tong Ting Coal Mine, this paper introduces the role of the PLC programmable control system and the economic benefits and safety effect.

基于ControlLogix的PLC冗余控制系统设计

从Rockwell Automation工业控制网络的架构以及组网方式出发,阐述了基于ControlLogix5550控制器的PLC冗余控制系统的实现过程。

基于5G多接入边缘计算的云化PLC系统架构设计与应用

随着工业控制系统对柔性化、扁平化的要求不断提升,以PLC为构建基础的传统工业控制网络在大规模接入、算力提升和部署灵活性方面均受到限制.针对这些问题,融合5G网络和边缘计算技术,设计了基于5G多接入边缘计算的云化PLC系统架构,阐述了该架构的运行机制和所涉及的关键技术;在此基础上,进行PLC系统的云化部署和调试,实现了工业现场、企业数据中心、5G网络和边缘网络的集成;最后,通过在某汽车制造公司产线改造过程中的应用,验证了所提架构的有效性.

Design of PLC control system of RTG spreader in Qingdao Port Container Terminal

The control method of rubber tyre gantry （RTG） spreader in Qingdao Port Container Terminal is logic board control,which has many shortcomings such as expensive spare parts and high faults.This paper designs a new control system using programmable logic controller （PLC） centralized control to replace the original logic board control.The new system mainly contains complete ELME spreader control scheme design,hardware selection and PLC control program development.Its field application shows that the system has characteristics of high efficiency,low running cost,easy maintenance.

基于PLC反渗透海水淡化控制系统的设计与开发

针对反渗透海水淡化系统工艺复杂、运维繁琐、对操作人员专业技能要求高的特点,研发了一套反渗透海水淡化控制系统。详细研究整个工艺系统中预处理、反渗透等关键工艺环节的原理及自动控制过程。从系统的硬件设计和软件开发两个方面进行详细阐述。硬件设计方面,根据装置规模和控制需求完成控制系统设备选型。软件开发方面,完成控制器及人机交互界面多套软件的开发。该系统成功应用于高校反渗透海水淡化教学实践课。应用结果表明:该系统设计合理、操作界面简洁方便,在稳定安全运行的同时可实现教学培训、故障处理等目的。该系统在提高海水淡化操作人员专业技能的同时,也对高校创新其他专业的实操培训课程提供了借鉴和技术支撑。

基于TIA Portal的HMI+PLC虚拟仿真探究

文章提出一种在TIA Portal软件上集成人机界面(Human Machine Interface,HMI)和可编程逻辑控制器(ProgrammableLogicController,PLC)进行虚拟仿真的方法。该方法能够在现有的硬件条件下,使学生不受时间、地点等的限制,只需要在计算机上安装TIA PORTAL软件就可以进行虚拟学习,构建控制系统,进行硬件组态、编程、控件组态、仿真运行和程序调试等。最后,以十字路口的交通灯为例,采用基于实际物理设备和基于TIAPORTAL软件虚拟仿真两种方式搭建控制系统,完成项目的设计、组态、编程、调试和运行测试。主要任务是寻找方法构建虚拟网络,将虚拟运行的PLC与HMI设备联系起来,实现虚拟设备之间和软件之间的数据传输,达到与使用实际物理设备效果相同的目的。

基于PLC的仓库灯光指引系统

基于可编程逻辑控制器(Programmable Logic Controller,PLC)的仓库灯光指引系统,即利用灯光指引位置进行定位。该系统适用性广泛,不仅在仓储行业内使用,还可以应用在其他行业,为提高效率发挥重要作用。设计灯光指引系统可以实现客户端数据采集,客户端和下位机间的数据传输,以及下位机对LED灯进行驱动等功能。最后,系统利用不同灯号的不同颜色,表示不同功能的状态。

基于PLC的气动搬运机械手自动控制系统设计

为提高气动搬运机械手在复杂工厂流水线中的运行效率,该文设计了一套基于PLC的气动搬运机械手自动控制系统。在分析通用气动机械手将物品在不同位点之间搬运的运动流程的基础上,设计了自动控制系统的硬件架构。其中包含了可编程逻辑控制器(PLC)、伺服电机、传感器和交互屏等器件,并根据气动搬运机械手的运动流程,设计了相应的软件控制程序及界面。仿真实验结果证明,所提出的气动搬运机械手自动控制系统可以稳定地完成实验预设的功能需求,自动化程度较高。

基于PLC的滤站自动控制系统设计

针对滤站的污水处理流程,设计基于可编程逻辑控制器(Programmable Logic Controller,PLC)的滤站自动控制系统,并详细阐述该系统的硬件设计、软件设计。通过应用自动控制系统,滤站能够自动完成污水处理流程,缩短人工时间,提高工作效率。

PLC技术在机电一体化设备智能控制中的应用

可编程逻辑控制器(Programmable Logic Controller,PLC)是一种在自动化与工业控制系统中广泛应用的电子装置。因其高度的可靠性、灵活性及适应性,PLC已成为机电一体化设备智能控制的核心技术之一。机电一体化设备结合了电子技术、机械技术及计算技术,旨在通过智能化控制提升设备的操作效率和精确度。PLC在此领域中的应用,不仅促进了工业生产线的自动化,还在数控机床和工业机器人等设备上展示了强大的控制能力。基于此,系统地阐述PLC技术的基本原理与结构,深入探讨其在机电一体化设备中的具体应用,如数控机床和工业机器人的智能控制,分析PLC面临的挑战,预测其未来的发展方向。

基于PLC的模块化可重组机器人实训平台控制系统研究

文章针对模块化可重组机器人的实训教学需求,提出一种基于可编程逻辑控制器(Programmable Logic Controller,PLC)的机器人实训平台控制系统。该系统采用模块化设计,通过PLC实现机器人的运动控制、传感反馈和人机交互等功能。为验证系统的可行性,设计一套完备的系统仿真实验,评估机器人执行机械加工任务的性能。实验结果表明,该系统能够显著提高加工精度和效率,在智能制造领域具有广阔的应用前景。

PLC技术在电气设备自动化控制中的应用

阐述PLC技术在电气设备自动化控制中的应用特点,包括可编程、灵活性、可靠性、实时性和可视化界面。探讨PLC技术在开关量控制、闭环控制、顺序控制中的控制应用。

Research on rapid development platform of PLC control system

In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.

基于PLC的豆粕固态发酵温度控制系统设计与试验

为了在豆粕固态发酵过程中给微生物提供适宜的生长繁殖条件,达到良好的发酵效果,对温度变化复杂的发酵环境进行实时的温度监测和控制。采用PLC对发酵罐的温度进行PID闭环控制,设计以37℃为目标值的试验。结果表明,发酵的豆粕中多肽含量、ACE抑制活性在终点时分别达到4.45 g/kg,53.2%,分别比自然发酵状态下提高5.7%和9.92%,温度控制系统有效提高了豆粕发酵产物的质量。研究为面向生产的豆粕固态发酵提供理论基础。

Synchro Controller of Radar on FPGA

This paper mainly represents the realization of synchro controller based on the programmable logic devices FPGA by request of HF ground wave radar synchro controller under the instance of making the best of the virtues of FPGA. This design introduces the data communication between PC and synchro controller by PC Bus, which can carry the synchronous signals parameters to RAM of synchro controller, then according to the theory that the result of comparing counter value with signals parameters is the needed wave, we produce all waves HF ground wave radar needs, moreover all waves are produced time-sharing in order to save resources.

Real Time Control System for Metro Railways Using PLC & SCADA

This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.

基于PLC的自动测流机器人系统设计

针对当前河道测流存在的效率和自动化程度较低、测量模式单一等问题,提出了一套基于可编程逻辑控制器(PLC)的河道自动测流机器人系统设计与实现方案。该机器人系统由运动系统、采集系统、人机交互以及远程通信四大模块组成。首先,设计了自动测流机器人系统的硬件结构,实现了自动测流机器人在河流轨道上运动、铅鱼收放等功能。然后,开发了基于PLC的测控系统,设计了PLC梯形图和硬件连接方案,实现了自动测流机器人运动控制。最后,自动测流机器人系统通过RS-485通信协议将多传感器采集的数据传输到操控屏,结合4G远程技术,实现了采集数据和操作指令的远程传输。通过现场模拟的采集测试,该机器人系统可实现自动测流、远程操控、故障自检等功能,并提供多种测量模式,满足河道测流的使用需求。该系统的设计为开展智能化河流数据采集的研究奠定了基础。