Teaching Reform and Exploration of Practical Courses Based on Programmable Control

As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.

Programmable Logic Controller Block Monitoring System for Memory Attack Defense in Industrial Control Systems

Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.

Design of 32 kbit one-time programmable memory for microcontroller units

A 32 kbit OTP(one-time programmable)memory for MCUs(micro-controller units)used in remote controllers was designed.This OTP memory is used for program and data storage.It is required to apply 5.5V to BL(bit-line)and 11V to WL(word-line)for a OTP cell of 0.35μm ETOX(EEPROM tunnel oxide)type by MagnaChip.We use 5V transistors on column data paths to reduce the area of column data paths since they require small areas.In addition,we secure device reliability by using HV(high-voltage)transistors in the WL driver.Furthermore,we change from a static logic to a dynamic logic used for the WL driver in the core circuit.Also,we optimize the WD(write data)switch circuit.Thus,we can implement them with a small-area design.In addition,we implement the address predecoder with a small-area logic circuit.The area of the designed 32 kbit OTP with 5V and HV devices is 674.725μm×258.75μm(=0.1745mm2)and is 56.3% smaller than that using 3.3V devices.

A novel fuzzy logic direct torque controller for a permanent magnet synchronous motor with a field programmable gate array

A high-performance digital servo system built on the platform of a field programmable gate array (FPGA),a fully digitized hardware design scheme of a direct torque control (DTC) and a low speed permanent magnet synchronous motor (PMSM) is proposed. The DTC strategy of PMSM is described with Verilog hardware description language and is employed on-chip FPGA in accordance with the electronic design automation design methodology. Due to large torque ripples in low speed PMSM,the hysteresis controller in a conventional PMSM DTC was replaced by a fuzzy controller. This FPGA scheme integrates the direct torque controller strategy,the time speed measurement algorithm,the fuzzy regulating technique and the space vector pulse width modulation principle. Experimental results indicate the fuzzy controller can provide a controllable speed at 20 r min-1 and torque at 330 N m with satisfactory dynamic and static performance. Furthermore,the results show that this new control strategy decreases the torque ripple drastically and enhances control performance.

Application of Programmable Controller in a Rail Welding Machine

An innovation is conducted on a K190πK rail auto welding machine because of its poor stability in quality of welding joints. A new control system based on a programmable controller is designed to replace the old one. The new control system is of higher accuracy in controlling sequence and good ability in anti disturbance, and is convenient to operate. The comparison tests are carried out. The experimental results show that the quality of welded joints is greatly increased by the improved welding mechine.

Synthesis of Nonlinear Control of Switching Topologies of Buck-Boost Converter Using Fuzzy Logic on Field Programmable Gate Array (FPGA)

An intelligent fuzzy logic inference pipeline for the control of a dc-dc buck-boost converter was designed and built using a semi-custom VLSI chip. The fuzzy linguistics describing the switching topologies of the converter was mapped into a look-up table that was synthesized into a set of Boolean equations. A VLSI chip–a field programmable gate array (FPGA) was used to implement the Boolean equations. Features include the size of RAM chip independent of number of rules in the knowledge base, on-chip fuzzification and defuzzification, faster response with speeds over giga fuzzy logic inferences per sec (FLIPS), and an inexpensive VLSI chip. The key application areas are: 1) on-chip integrated controllers;and 2) on-chip co-integration for entire system of sensors, circuits, controllers, and detectors for building complete instrument systems.

Application of PLC programmable control technology in the mine pit transportation system

This paper summarizes the definition, function, and characteristics of the programmable conlrol technology, and especially analyzes the operation mode of the 750V DC traction power supply system, the protection setting the defects of the original system and the factors influencing the safety of power supply. Aimed at the equipment of the PLC programmable control system used in the mine transportation system in recent years, combining parts of the PLC programmable control system equipment used and installed in Tong Ting Coal Mine, this paper introduces the role of the PLC programmable control system and the economic benefits and safety effect.

Development of FPGA Based NURBS Interpolator and Motion Controller with Multiprocessor Technique

The high-speed computational performance is gained at the cost of huge hardware resource,which restricts the application of high-accuracy algorithms because of the limited hardware cost in practical use.To solve the problem,a novel method for designing the field programmable gate array(FPGA)-based non-uniform rational B-spline(NURBS) interpolator and motion controller,which adopts the embedded multiprocessor technique,is proposed in this study.The hardware and software design for the multiprocessor,one of which is for NURBS interpolation and the other for position servo control,is presented.Performance analysis and experiments on an X-Y table are carried out,hardware cost as well as consuming time for interpolation and motion control is compared with the existing methods.The experimental and comparing results indicate that,compared with the existing methods,the proposed method can reduce the hardware cost by 97.5% using higher-accuracy interpolation algorithm within the period of 0.5 ms.A method which ensures the real-time performance and interpolation accuracy,and reduces the hardware cost significantly is proposed,and it’s practical in the use of industrial application.

Implementation of a new PC based controller for a PUMA robot

This paper describes the replacement of a controller for a programmable universal machine for assembly (PUMA) 512 robot with a newly designed PC based (open architecture) controller employing a real-time direct control of six joints. The original structure of the PUMA robot is retained. The hardware of the new controller includes such in-house designed parts as pulse width modulation (PWM) amplifiers, digital and analog controllers, I/O cards, signal conditioner cards, and 16-bit A/D and D/A boards. An Intel Pentium IV industrial computer is used as the central controller. The control software is implemented using VC++ programming language. The trajectory tracking performance of all six joints is tested at varying velocities. Experimental results show that it is feasible to implement the suggested open architecture platform for PUMA 500 series robots through the software routines running on a PC. By assembling controller from off-the-shell hardware and software components, the benefits of reduced and improved robustness have been realized.

Synchro Controller of Radar on FPGA

This paper mainly represents the realization of synchro controller based on the programmable logic devices FPGA by request of HF ground wave radar synchro controller under the instance of making the best of the virtues of FPGA. This design introduces the data communication between PC and synchro controller by PC Bus, which can carry the synchronous signals parameters to RAM of synchro controller, then according to the theory that the result of comparing counter value with signals parameters is the needed wave, we produce all waves HF ground wave radar needs, moreover all waves are produced time-sharing in order to save resources.

Real-time hybrid simulation of structures equipped with viscoelastic-plastic dampers using a user-programmable computational platform

A user-programmable computational/control platform was developed at the University of Toronto that offers real-time hybrid simulation （RTHS） capabilities. The platform was verified previously using several linear physical substructures. The study presented in this paper is focused on further validating the RTHS platform using a nonlinear viscoelastic-plastic damper that has displacement, frequency and temperature-dependent properties. The validation study includes damper component characterization tests, as well as RTHS of a series of single-degree-of-freedom （SDOF） systems equipped with viscoelastic-plastic dampers that represent different structural designs. From the component characterization tests, it was found that for a wide range of excitation frequencies and friction slip loads, the tracking errors are comparable to the errors in RTHS of linear spring systems. The hybrid SDOF results are compared to an independently validated thermal- mechanical viscoelastic model to further validate the ability for the platform to test nonlinear systems. After the validation, as an application study, nonlinear SDOF hybrid tests were used to develop performance spectra to predict the response of structures equipped with damping systems that are more challenging to model analytically. The use of the experimental performance spectra is illustrated by comparing the predicted response to the hybrid test response of 2DOF systems equipped with viscoelastic-plastic dampers.

Real-time programmable coding metasurface antenna for multibeam switching and scanning

Novel electromagnetic wave modulation by programmable dynamic metasurface promotes the device design freedom,while multibeam antennas have sparked tremendous interest in wireless communications.A programmable coding antenna based on active metasurface elements(AMSEs)is proposed in this study,allowing scanning and state switching of multiple beams in real time.To obtain the planar array phase distribution in quick response,the aperture field superposition and discretization procedures are investigated.Without the need for a massive algorithm or elaborate design,this electronically controlled antenna with integrated radiation and phase-shift functions can flexibly manipulate the scattering state of multiple beams under field-programmable gate array(FPGA)control.Simulation and experimental results show that the multiple directional beams dynamically generated in the metasurface upper half space have good radiation performance,with the main lobe directions closely matching the predesigned angles.This metasurface antenna has great potential for future applications in multitarget radar,satellite navigation,and reconfigurable intelligent metasurfaces.

Evaluation of Selected Control Programming Languages for Process Engineers by Means of Cognitive Effectiveness and Dimensions

Different programming languages can be used for discrete, abstract and process-oriented programming. Depending on the application, there exist additional requirements, which are not fulfilled by every programming language. Flexible programming and maintainability are especially important requirements for process engineers. In this paper, the programming languages Activity Diagram, State Chart Diagram and Sequential Function Chart are compared and evaluated with regard to these requirements. This evaluation is based on the principles of cognitive effectiveness and cognitive dimensions. The aim of this paper is to identify the programming language suited best for controlling sequential processes, e.g. thermomechanical or batch processes.

Embedded Programmable Single Point Multiple Output Intelligent Data Acquisition and Transmission System

To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single point multiple output intelligent data acquisition and transmission system. It made an in-depth elaboration of the data acquisition and transmission system from hardware design,software architecture and principle,main functions and technical parameters. Finally,it came up with four innovation points:(i) intelligent(automatic)matching a variety of communication protocols for environmental monitoring equipment,(ii) realizing multi-protocol and multi-target parallel data transmission,(iii) realizing remote dynamic input of control instructions through wired or wireless network,and(iv) supporting configuration(process) simulation of field equipment DCS operating conditions.

FLOOD CONTROL PROGRAMME IN BANGLADESH

Bangladesh locates in lower reach of Ganges-Brahmaputra-Meghma, Bengal delta. Bangladesh is a land of rivers and heavy monsoon rains. Every year during monsoon period (May-September)the country floods of verying magnitude, it causes damages to crops, properties, infrastructures, etc. and ultimately affects the economy development of the country. Banglandesh flood has some features given below: 1. The excessive rainfall over the vast catchment area of the river is the main cause of flood in Bangladesh, but 90% of the flood carried by rivers come from outside the country, i.e. regional countries, India, Nepal,

THE DESIGN OF VMEBUS BRIDGE CONTROLLER WITH SHARC BUS

Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.

Real Time Control System for Metro Railways Using PLC & SCADA

This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.

基于5G多接入边缘计算的云化PLC系统架构设计与应用

随着工业控制系统对柔性化、扁平化的要求不断提升,以PLC为构建基础的传统工业控制网络在大规模接入、算力提升和部署灵活性方面均受到限制.针对这些问题,融合5G网络和边缘计算技术,设计了基于5G多接入边缘计算的云化PLC系统架构,阐述了该架构的运行机制和所涉及的关键技术;在此基础上,进行PLC系统的云化部署和调试,实现了工业现场、企业数据中心、5G网络和边缘网络的集成;最后,通过在某汽车制造公司产线改造过程中的应用,验证了所提架构的有效性.