Vibrations induced by tunnel boring machine in urban areas: In situ measurements and methodology of analysis

Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where TBMs are increasingly large in diameter and shallow in depth.In response to this problem,four experimental campaigns were carried out in different geotechnical contexts in France.The vibration measurements were acquired on the surface and inside the TBMs.These measurements are also complemented by few data in the literature.An original methodology of signal processing is pro-posed to characterize the amplitude of the particle velocities,as well as the frequency content of the signals to highlight the most energetic bands.The levels of vibrations are also compared with the thresholds existing in various European regulations concerning the impact on neighbouring structures and the disturbance to local residents.

Establishment of continuous cooling transformation diagrams of aluminum alloys using in situ voltage measurement

An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was recorded under the constant current state during continuous cooling.Solutionizing time,together with starting and finishing temperatures of phase transformation of the alloy can be obtained from relationships of voltage vs time and temperature.A critical cooling rate without detectable phase transition during continuous cooling can be determined.Continuous cooling transformation diagrams of tested samples can be established conveniently based on these results.Microstructure observation and differential scanning calorimetry（DSC） testing were applied to verify the reliability of continuous cooling transformation diagram.

IN SITU MEASUREMENT OF BREEDING-FIRE OF SULPHIDE ORE DUMPS

ＩＮＳＩＴＵＭＥＡＳＵＲＥＭＥＮＴＯＦＢＲＥＥＤＩＮＧＦＩＲＥＯＦＳＵＬＰＨＩＤＥＯＲＥＤＵＭＰＳ①ＷｕＣｈａｏ，ＷａｎｇＰｉｎｇｌｏｎｇ，ＭｅｎｇＴｉｎｇｒａｎｇＤｅｐａｒｔｍｅｎｔｏｆＲｅｓｏｕｒｃｅｓＥｘｐｌｏｉｔａｔｉｏｎＥｎｇｉｎｅｒｉｎ...

Measurements of in situ stress and mining-induced stress in Beiminghe Iron Mine of China

In order to obtain the distribution rules of in situ stress and mining-induced stress of Beiminghe Iron Mine, the stress relief method by overcoring was used to measure the in situ stress, and the MC type bore-hole stress gauge was adopted to measure the mining-induced stress. In the in situ stress measuring, the technique of improved hollow inclusion cells was adopted, which can realize complete temperature compensation. Based on the measuring results, the distribution model of in situ stress was established and analyzed. The in situ stress measuring result shows that the maximum horizontal stress is 1.75-2.45 times of vertical stress and almost 1.83 times of the minimum horizontal stress in this mineral field. And the mining-induced stress measuring result shows that, according to the magnitude of front abutment pressure the stress region can be separated into stress-relaxed area, stress- concentrated area and initial stress area. At the -50 m mining level of this mine, the range of stress-relaxed area is 0-3 m before mining face; the range of stress-concentrated area is 3-55 m before mining face, and the maximum mining-induced stress is 16.5-17.5 MPa, which is 15-20 m from the mining face. The coefficient of stress concentration is 1.85.

Self-contained in situ sediment acoustic measurement system based on hydraulic driving penetration

A novel self-contained in situ sediment acoustic measurement system based on hydraulic driving penetration is proposed to solve the problem of large disturbances to sediments of the in situ equipments already in existence. By using a hydraulic driving device, the system drives four acoustic probes into sediments at an even speed, and this decreases disturbances to sediments introduced by the penetration of acoustic probes. By means of the special design of the central control unit, the system can work full-automatically and the data are stored self-containedly, and this avoids the requirement of real-time remote controlling from the ship. Its operating water depth, measuring depth and measuring frequency is 500m, 1.0m and 30kHz respectively. A set of in situ sound speeds and attenuation coefficients of sediments are obtained at 40 stations using the system. The results confirm that the data obtained by the in situ sediment acoustic system are accurate and credible.

In Situ Measurement of the Undisturbed Ground Temperature for Ground Source Heat Pump System

The undisturbed ground temperatures are important for design of the ground heat exchangers in ground source heat pump （GSHP） systems. In this paper, the undisturbed ground temperatures measured in two different methods are presented. The investigation was carried out in two cases. The temperature measured with the direct method is assumed to give the correct undisturbed ground temperature profile. The temperature measured with indirect method overestimates the undisturbed ground temperature by 2.1℃ and 1.7~C. This difference is mainly caused by the circulation pump and ambient air to the fluid. Therefore, the results that are decreased about 2℃ as compared with the indirect measured are recommended to estimate the undisturbed ground temperature in situ measuring. A smaller pump or deeper borehole or mild weather would result in a more correct temperature. Because the undisturbed ground temperature is affected by many factors. Whether or not these conclusions are correct to other areas, this would need further investigation.

Methane seepages in the northern South China Sea: evidence from in situ measurements

Continental margins in world oceans contain large amounts of marine gas hydrates. Changes in the temperature and pressure of sediment may destabilize the methane hydrate, leading to its release and seepage into the sea. This process would increase the dissolved methane in the ambient seawater. In this study, a methane sensor was used to detect methane anomalies in the water column in southwestern Dongsha and Shenhu, northern slope of the South China Sea. Methane plumes were detected at stations SCS001 and T001 in the southwestern Dongsha area, and station SCS002 in the Shenhu area, respectively. The maximum methane concentrations were 8.8 nmol/L in southwestern Dongsha and 10.1 nmol/L in Shenhu, which are about 4–5 times higher than the background methane concentration. This indicates that there are active methane seepages present in both the southwestern Dongsha and Shenhu areas, which are likely related to a methane hydrate reservoir beneath the seafloor. A methane sensor with a low detection limit is a practical instrument with which to detect methane plumes in oceanic environments and to monitor methane leakage from the seafloor.

Advance of in-situ stress measurement in China

In-situ stress is an essential parameter for design and construction of most engineering projects that involve excavation in rocks. Progress in in-situ stress measurement from the 1950s in China is briefly introduced. Stress relief by overcoring technique and hydraulic fracturing： technique are the two main techniques for in-situ stress measurement in China at present. To make them suitable for application at great depth and to increase their measuring reliability and accuracy, a series of techniques have been developed. Applications and achievements of in-situ stress measurement in Chinese rock engineering, including mining, geotechnical and hydropower engineering, and earthquake prediction, are introduced. Suggestions for further development of in-situ stress measurement are also proposed.

Preliminary Results of In-situ Stress Measurements along the Longmenshan Fault Zone after the Wenchuan M_s 8.0 Earthquake

Four months after the Wenchuan Ms 8 earthquake in western Sichuan, China, in situ stress measurements were carried out along the Longmenshan fault zone with the purpose of obtaining stress parameters for earthquake hazard assessment. In-situ stresses were measured in three new boreholes by using overcoring with the piezomagnetic stress gauges for shallow depths and hydraulic fracturing for lower depths. The maximum horizontal stress in shallow depths （-20 m） is about 4.3 MPa, oriented N19°E, in the epicenter area at Yingxiu Town, about 9.7 MPa, oriented N51°W, at Baoxing County in the southwestern Longmenshan range, and about 2.6 MPa, oriented N39°E, near Kangding in the southernmost zone of the Longmenshan range. Hydraulic fracturing at borehole depths from 100 to 400 m shows a tendency towards increasing stress with depth. A comparison with the results measured before the Wenchuan earthquake along the Longmenshan zone and in the Tibetan Plateau demonstrates that the stress level remains relatively high in the southwestern segment of the Longmenshan range, and is still moderate in the epicenter zone. These results provide a key appraisal for future assessment of earthquake hazards of the Longmenshan fault zone and the aftershock occurrences of the Wenchuan earthquake.

Development of in-situ Marine Sediment Geo-Acoustic Measurement System with Real-Time and Multi Frequencies (the Second Generation)

Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system （MFIS^AMS） has been developed. The system can provide acoustic vdocity （compressional wave） and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies （multi-frequencies） and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.

A COMBINED MEASUREMENT SYSTEM FOR UV/V IN SITU SPECTROELECTROCHEMICAL STUDY

A microcomputer-based UV/V in situ spectroelectrochemical measurement system has been developed.This paper presents a description of the experimental details regarding the methods and equipment.

New development of hydraulic fracturing technique for in-situ stress measurement at great depth of mines

In-situ stress measurement using the hydraulic fracturing technique was made at Wanfu Coal Mine in Shandong Province, China. To solve problems caused by great measuring depth and extra thick overburden soil layers in the mine, a series of improved techniques were developed for the traditional hydraulic fracturing technique and equipment to increase their pressure-enduring ability and to ensure safe and flexible removal of the sealing packers with other experimental apparatus. Successful in-situ stress measurement at 37 points within 7 boreholes, which were mostly over 1000 m deep, was completed. Through the measurement, detailed information of in-situ stress state has been provided for mining design of the mine. The improved hydraulic fracturing technique and equipment also provide reliable tools for in-situ stress measurement at great depth of other mines.

A distributed measurement method for in-situ soil moisture content by using carbon-fiber heated cable

Moisture content is a fundamental physical index that quantifies soil property and is closely associatedwith the hydrological, ecological and engineering behaviors of soil. To measure in-situ soil moisturecontents, a distributed measurement system for in-situ soil moisture content （SM-DTS） is introduced.The system is based on carbon-fiber heated cable （CFHC） technology that has been developed to enhancethe measuring accuracy of in-situ soil moisture content. Using CFHC technique, a temperature characteristicvalue （Tt） can be defined from temperatureetime curves. A relationship among Tt, soil thermalimpedance coefficient and soil moisture content is then established in laboratory. The feasibility of theSM-DTS technology to provide distributed measurements of in-situ soil moisture content is verifiedthrough field tests. The research reported herein indicates that the proposed SM-DTS is capable ofmeasuring in-situ soil moisture content over long distances and large areas.

Analysis on method for effective in-situ stress measurement in hot dry rock reservoir

With the rapid increase of energy demand and the increasingly highlighted environmental problems, clean, safe and widely distributed geothermal resources have become a hot spot for renewable resources development. The state of in-situ stress is a major control parameter for multiple links including well location, fracture inspiration and reservoir assessment, so how to determine the accurate state of in-situ stress in the deep thermal reservoir becomes a core problem drawing widely attention and urgent to be solved. Based on features of hot dry rock reservoir in terms of temperature and pressure and the comparison analysis, this article proposes the method of Anelastic Strain Recovery(ASR) as an effective method for determining the state of in-situ stress in the area with HDR resources distributed and explains the availability of ASR method by application examples.

Techniques for in-situ stress measurement at great depth

Reliable information of in--situ stress state is necessary for the design andconstruction of most important rock projects. As most rock projects are getting deeper and deeper,traditional techniques of in--situ stress measurement are not very suitable. The current techniquesof in--situ stress measurement and their insufficiency for use at great depth are analyzed. Somebasic ideas of the development of new techniques and the improvement of current techniques for useat great depth are provided.

Development of Sb Microelectrode and In-situ pH Measurement of Electroless Nickel Reaction Interface

Sb microelectrodes were prepared by plating. The results of testing show that they have excellent stability, quick responding speed, high pH sensitivity (35～40 mV/pH) and long useful life in high temperature acidic electroless nickel (EN) bath. By using Sb microelectrode, the pH value in EN reaction interface was measured in situ . There exists the fluctuation of pH during EN plating, and the amplitude of fluctuation tends to decrease with plating time. The largest fluctuation amplitude can reach 1～2 pH value. The in situ pH measurement provides reliable experimental results for explaining the formation of layer structure of EN deposit.

Chemical Dosimetry during Alpha Irradiation: A Specific System for UV-Vis <i>in Situ</i>Measurement

This paper is devoted to the study of the potentiality of the Fricke dosimeter for the characterization of the highly energetic (62.1 MeV) α particles beams generated by a new cyclotron facility, namely ARRONAX started in 2009. Such for this high energetic α beam, in situ dosimetry is performed in order to avoid radiation safety inconvenience and to earn run time of irradiation. Therefore, an in situ Fricke dosimetry protocol is developed and its reliability is checked by comparison with other experiments carried out by using the traditional method (ex situ Fricke dosimetry) within another cyclotron facility (CEMHTI) and by comparison with literature data. To author’s knowledge, it is the first time that Fricke dosimetry is performed during the α irradiation experiment. The results of these in situ dosimetry experiments show that the value of ferric ions radiolytic yield (G(Fe3+) = (11.7 ± 1.2) 10–7 mol?J–1) extrapolated from literature data can be used for this higher energy of α particles (Eα = 62.1 MeV).

In situ measurements of benthic oxygen fluxes in Hui-quan Bay of Qingdao by eddy correlation techniques:short term pattern variations in gravel beach

The oxygen fluxe across the sediment-water interface(SWI)in coastal region is a key measure to fully understand the regulation of biogeochemical cycles in an aquatic environment.However,studies on fluxes of dissolved oxygen in gravel beach are limited,because of the difficulty in sample collection and instrumentations deployment.In this study,benthic oxygen fluxes across rocky substratum in an intertidal zone of Huiquan Bay was estimated by using noninvasive eddy correlation techniques.A total of 10 burst measurements were analyzed.The oxygen flux fluctuated from-5.7888±2.6 to+49.3344±2.6 mmol O2 m-2/d were observed.The cospectra analysis showed that the oxygen flux at the frequency band between 0.093 and 0.279 Hz(at a period from 3.58 to 10.75 s)contributed 50.19%to the total spectrum on average.The results showed that the major contribution band moved to the high frequency region gradually and reached a steady state with increasing tidal flood.It is demonstrated that wave movement and wave breaking interaction resulted in the change of oxygen flux between gravel beach and shallow waters at the start and the end of a rising tide period,respectively.The eddy correlation techniques offer an efficient means for flux measurement over a gravel or mixed sand and gravel beaches.

Reliability analysis of in-situ stress measurement using circumferential velocity anisotropy

In-situ stress measurement for deep reservoir formation is difficult in terms of security, reliability and technique. Acoustic velocity anisotropy test is a basic method for stress measurement of rock cores, which is based on the distribution of acoustic velocity in different directions around rock cores. The heterogeneity of core samples, such as fractures and gravel contained, can also lead to wave velocity anisotropy. Therefore, the corresponding reliability evaluation method is established to exclude some other anisotropy factors caused by non-tectonic stresses. In this paper, the reliability of testing results is evaluated from three aspects, i.e. phase difference, anisotropy index and waveform, to remove the factors caused by non-tectonic stresses.

In-situ multi-information measurement system for preparing gallium nitride photocathode

We introduce the first domestic in-situ multi-information measurement system for a gallium nitride （GaN） photo- cathode. This system can successfully fulfill heat cleaning and activation for GaN in an ultrahigh vacuum environment and produce a GaN photocathode with a negative electron affinity （NEA） status. Information including the heat clean- ing temperature, vacuum degree, photocurrent, electric current of cesium source, oxygen source, and the most important information about the spectral response, or equivalently, the quantum efficiency （QE） can be obtained during prepa- ration. The preparation of a GaN photocathode with this system indicates that the optimal heating temperature in a vacuum is about 700 ~C. We also develop a method of quickly evaluating the atomically clean surface with the vacuum degree versus wavelength curve to prevent possible secondary contamination when the atomic level cleaning surface is tested with X-ray photoelectron spectroscopy. The photocurrent shows a quick enhancement when the current ratio between the cesium source and oxygen source is 1.025. The spectral response of the GaN photocathode is flat in a wavelength range from 240 nm to 365 nm, and an abrupt decline is observed at 365 nm, which demonstrates that with the in-si$u multi-information measurement system the NEA GaN photocathode can be successfully prepared.