The potentials of Pt-black electrode using a copper conducting wire instead of the salt bridge in acid and alkaline solutions without the use of H2 evolution reactions were measured. There were three nonlinear portion...The potentials of Pt-black electrode using a copper conducting wire instead of the salt bridge in acid and alkaline solutions without the use of H2 evolution reactions were measured. There were three nonlinear portions in the calibration curve. Unusually, the potential slopes at pH 3-5 and 8-10 indicated 200 mV and 70 mV per pH, respectively. Such high sensitivity for pH slope, more than 4 times of usual 59 mV per pH, may be credited to the special properties of the Pt-black surface. SEM （scanning electronical microscopy） was applied to characterize the surface of the Pt-black electrode. Its working mechanism is well explained in the theory of capacitance potentials rather than Nernst＇s redox potentials.展开更多
Catalysts of carbon monoxide oxidation were synthesized by deposition of platinum on titanium nitride (TiN). Two substrates with an average particle size of 18 and 36 nm were obtained by hydrogen reduction of titanium...Catalysts of carbon monoxide oxidation were synthesized by deposition of platinum on titanium nitride (TiN). Two substrates with an average particle size of 18 and 36 nm were obtained by hydrogen reduction of titanium tetrachloride in a stream of microwave plasma of nitrogen. The surface of the catalysts was studied by X-ray photoelectron spectroscopy (XPS). The data obtained by us in the present work indicate the presence of oxynitride as a transition layer between nitride and oxide. It was found that the CO oxidation rate on the 9 - 15 wt.% Pt loaded TiN catalysts is 120 times higher than that on the platinum black with a specific surface of 30 m<sup>2</sup>/g. Increase in the reaction rate of CO oxidation on Pt/TiN catalysts as compared to platinum black can be associated with both an increase in the concentration of CO molecules adsorbed and a decrease in the activation energy of the reaction. Catalysts are promising for use in catalytic air purification systems.展开更多
基金Funded by the Liaoning Province Education Science Foundation (No.2004D075)
文摘The potentials of Pt-black electrode using a copper conducting wire instead of the salt bridge in acid and alkaline solutions without the use of H2 evolution reactions were measured. There were three nonlinear portions in the calibration curve. Unusually, the potential slopes at pH 3-5 and 8-10 indicated 200 mV and 70 mV per pH, respectively. Such high sensitivity for pH slope, more than 4 times of usual 59 mV per pH, may be credited to the special properties of the Pt-black surface. SEM （scanning electronical microscopy） was applied to characterize the surface of the Pt-black electrode. Its working mechanism is well explained in the theory of capacitance potentials rather than Nernst＇s redox potentials.
基金supported by the National Natural Science Foundation of China(60876082)the Science and Technology De-partment of Shanghai(0852nm06600)+2 种基金the Program for New Cen-tury Excellent Talents in University(2009)the"Shu Guang" project supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation(08SG13)Aviation Science Foundation(2008ZE57019)~~
文摘Catalysts of carbon monoxide oxidation were synthesized by deposition of platinum on titanium nitride (TiN). Two substrates with an average particle size of 18 and 36 nm were obtained by hydrogen reduction of titanium tetrachloride in a stream of microwave plasma of nitrogen. The surface of the catalysts was studied by X-ray photoelectron spectroscopy (XPS). The data obtained by us in the present work indicate the presence of oxynitride as a transition layer between nitride and oxide. It was found that the CO oxidation rate on the 9 - 15 wt.% Pt loaded TiN catalysts is 120 times higher than that on the platinum black with a specific surface of 30 m<sup>2</sup>/g. Increase in the reaction rate of CO oxidation on Pt/TiN catalysts as compared to platinum black can be associated with both an increase in the concentration of CO molecules adsorbed and a decrease in the activation energy of the reaction. Catalysts are promising for use in catalytic air purification systems.
