The nature of the pull-out system of carbon nanorope/polyethylene（CNRP/PE） composite is studied by using molecular dynamics approach. The deformation of the CNRP/PE composites in pull-out process is exhibited. The i...The nature of the pull-out system of carbon nanorope/polyethylene（CNRP/PE） composite is studied by using molecular dynamics approach. The deformation of the CNRP/PE composites in pull-out process is exhibited. The influence of twisting deformation on the interfacial interaction of the composites is investigated. The results show that the energy of the pull-out system is conserved; and the interfacial bonding is weak resulting in a sliding failure of the CNRP inside PE matrix.展开更多
The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the aux...The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the auxiliary switches of the proposed converter are entirely achieved. The resonant capacitor achieves high voltage by operating the auxiliary cell. The auxiliary switch turns on before the main switches turn off, the high voltage of resonant capacitor blanks off the rectifier, and then the curr...展开更多
The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS)...The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS) PWM push pull three level converter in which the voltage stress of switches is input voltage. With phase shifted modulation strategy, the leading switches can only realize zero voltage switching (ZVS), and the lagging switches can realize ZCS when block capacitor and block diodes are added. Using the strategy, the converter overcomes the drawbacks presented by the conventional push pull converter, such as magnetic aberration, large switch loss, and voltage spike on switches, so it can get higher efficiency, and a wider application area. The operating principle of the new converter is analyzed and verified on a 600 W, 50 kHz experimental prototype. Several zero voltage and zero current switching PWM push pull three level converters are proposed.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.11172012 and 11472020)
文摘The nature of the pull-out system of carbon nanorope/polyethylene（CNRP/PE） composite is studied by using molecular dynamics approach. The deformation of the CNRP/PE composites in pull-out process is exhibited. The influence of twisting deformation on the interfacial interaction of the composites is investigated. The results show that the energy of the pull-out system is conserved; and the interfacial bonding is weak resulting in a sliding failure of the CNRP inside PE matrix.
文摘The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the auxiliary switches of the proposed converter are entirely achieved. The resonant capacitor achieves high voltage by operating the auxiliary cell. The auxiliary switch turns on before the main switches turn off, the high voltage of resonant capacitor blanks off the rectifier, and then the curr...
文摘The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS) PWM push pull three level converter in which the voltage stress of switches is input voltage. With phase shifted modulation strategy, the leading switches can only realize zero voltage switching (ZVS), and the lagging switches can realize ZCS when block capacitor and block diodes are added. Using the strategy, the converter overcomes the drawbacks presented by the conventional push pull converter, such as magnetic aberration, large switch loss, and voltage spike on switches, so it can get higher efficiency, and a wider application area. The operating principle of the new converter is analyzed and verified on a 600 W, 50 kHz experimental prototype. Several zero voltage and zero current switching PWM push pull three level converters are proposed.
