IMPROVE THE KINETIC PERFORMANCE OF THE PUMP CONTROLLED CLAMPING UNIT IN PLASTIC INJECTION MOLDING MACHINE WITH ADAPTIVE CONTROL STRATEGY

The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variation of the cylinder equivalent mass caused by the transmission ratio of clamping unit and the severe instantaneous impact force acted on the cylinder during the mold closing and opening process, an adaptive control principle of parameter and structure is proposed to improve its kinetic performance. The adaptive correlation between the acceleration feedback gain and the variable mass is derived. The pressure differential feedback is introduced to improve the dynamic performance in the case of small inertia and heavy impact load. The adaptation of sum pressure to load is used to reduce the energy loss of the system. The research results are verified by the simulation and experiment, The investigation method and the conclusions are also suitable for the differential cylinder system controlled by the traditional servo pump unit.

LQ Speed Control of Pump Controlled Motor System

A linear quadric (LQ) optimal speed control algorithm is proposed for the speed control of a pump controlled motor hydraulic system. The control theme consists of optimal state feedback and disturbing compensation based on observation. The optimal state feedback bases on LQ cost function. The disturbing compensation is realized through reconstructing the state of load torque. A series of simulation are performed, and the results show that the control performance is satisfactory and can be maintained under changes of load torque.

Ion pump control system designed for HIRFL

Background Ion pump control system of HIRFL is designed based on the real-time distributed control software,EPICS.The hardware architecture,communication principle,database design and interlock design are introduced and elaborated in the paper.Methods PLC has been adopted to realize functions such as control monitoring and data communication.Interlock protect ion has been designed for ion pump control system to prevent damaging from high voltage.Results The test results show that the system has fast response function and high-speed data processing during the beam running and tuning.The response time of the system could reach 100 ms,the rate of data acquisition reaches to 10 time/s and the interlock protection time less than 40 ms.Conclusion The reliable and stable long-term operation of the vacuum system indicates that the performance has been constantly improved with the continuous optimization of the ion pump control system.

Temperature Control of Proton Exchange Membrane Fuel Cell Based on Linear Active Disturbance Rejection Control

The performance of proton exchange membrane fuel cells is very sensitive to temperature. The electrochemical reaction results directly in temperature variations in the proton exchange membrane fuel cell. Ensuring effective temperature control is crucial to ensure fuel cell reliability and durability. This paper uses active disturbance rejection control in the thermal management system to maintain the operating temperature and the stack inlet and outlet temperature difference at the set value. First, key cooling system modules such as expansion tanks, coolant circulation pumps and radiators based on Simulink were built. Then, physical modeling and simulation of the fuel cell cooling system was carried out. In order to ensure the effectiveness of the control strategy and reduce the parameter tuning workload, an active disturbance rejection control parameter optimization method using an elite genetic algorithm was proposed. When the optimized control strategy responds to input disturbances, the maximum overshoot of the system is only 1.23% and can reach stability again in 30 s, so the fuel cell temperature can be controlled effectively. Simulation results show that the optimized control strategy can effectively control the stack temperature and coolant temperature difference under the influence of stepped charging current without interference or with interference, and has strong robustness and anti-interference capability.

Refrigerant Control Strategies for Residential Air-Conditioning and Heat-Pump System

This paper simulated the optimal refrigerant charge inventory of a refrigeration system in air-conditioning operation and heat-pump operation respectively,and studied the refrigerant control strategies in this system.The void fraction in two-phase fluid region was calculated by Harms model.And based on distributed parameter model and Harms model,the refrigerant charge inventory in condenser and evaporator were calculated and analyzed in air-conditioning conditions and heat-pump conditions,respectively.The calculating results of different refrigerant mass between refrigeration and heating conditions indicate that the optimal refrigerant charge inventory in heat-pump conditions is lower than that in air-conditioning conditions.To avoid the decrease of COP due to the surplus refrigerant in heating conditions,we introduced the liquid reservoir control method and associate capillary control method.Both of them could increase the heating capacity of the air-source heat pump.The difference of optimal refrigerant charge inventory in air-conditioning and heat-pump system can be controlled by the liquid reservoir or the associate capillary.

SIMULATION IN THERMAL DESIGN FOR ELECTRONIC CONTROL UNIT OF ELECTRONIC UNIT PUMP

The high working junction temperature of power component is the most common reason of its failure. So the thermal design is of vital importance in electronic control unit （ECU） design. By means of circuit simulation, the thermal design of ECU for electronic unit pump （EUP） fuel system is applied. The power dissipation model of each power component in the ECU is created and simulated. According to the analyses of simulation results, the factors which affect the power dissipation of components are analyzed. Then the ways for reducing the power dissipation of power components are carried out. The power dissipation of power components at different engine state is calculated and analyzed. The maximal power dissipation of each power component in all possible engine state is also carried out based on these simulations. A cooling system is designed based on these studies. The tests show that the maximum total power dissipation of ECU drops from 43.2 W to 33.84 W after these simulations and optimizations. These applications of simulations in thermal design of ECU can greatly increase the quality of the design, save the design cost and shorten design time

THEORETICAL AND EXPERIMENTAL STUDY ON THE PRESSURE AND VACUUM CONTINUOUS CONTROL SYSTEM BASED ON HYBRID PUMP

A novel pressure and vacuum continuous control system, which adopts a hybrid pump as pressure and vacuum source, is presented. The mathematical model of the system is developed. The theoretical simulation and analysis on the system are implemented in order to study the relationships among the characteristics, parameters and working points of the system. The experimental investigations on the system characteristics are presented with the adoption ofa fuzzy-PID controller. The simulation and experimental results indicate that the pressure and vacuum continuous control system based on hybrid pump has good dynamic and static performance, strong robustness and satisfactory adaptability to various system parameters. According to the results, system can successfully gain high accuracy and fast response signal. Also, the mathematical model of system is also testified by the experimental results.

Effect of proton pump inhibitors on glycemic control in patients with diabetes

Gastrin is a linear peptide hormone which is secreted mostly in the stomach pyloric antrum G cells. Although the main role of this hormone is the promotion of the secretion of gastric acid from the stomach parietal cells, gastrin can also behave as a growth factor and stimulate gastric cell proliferation. It is also reported that gastrin promotes β cell neogenesis in the pancreatic ductal complex, modest pancreatic β cell replication, and improvement of glucose tolerance in animal models, in which the remodeling of pancreatic tissues is promoted. These findings suggest the possibility that gastrin has the potential to promote an increase of β cell mass in pancreas, and therefore that gastrin may improve glucose tolerance. Proton pump inhibitors(PPIs) are wildly used clinically for the therapy of gastro-esophageal reflex disease, gastritis due to excess stomach acid, and gastric ulcers. PPIs indirectly elevate serum gastrin levels via a negative feedback effect. Recent evidence has revealed the beneficial effect of PPIs on glycemic control especially in patients with type 2 diabetes mellitus(T2DM), probably via the elevation of the levels of serum gastrin, although the detailed mechanism remains unclear. In addition, the beneficial effects of a combination therapy of gastrin or a PPI with a glucagon-like peptide-1 receptor agonist on glycemic control in animal models have been demonstrated. Although PPIs may be possible candidates for a new approach in the therapy of diabetes, a prospective, longterm, randomized, double-blind, placebo-controlled study is needed to establish the effect of PPIs on glycemic control in a large number of patients with T2 DM.

PRINCIPLE TO CLOSED LOOP CONTROL DIFFERENTIAL CYLINDER WITH DOUBLE SPEED VARIABLE PUMPS AND SINGLE LOOP CONTROL SIGNAL

To control the position of differential cylinder closed loop without usingany throttle elements, a flew idea that two speed variable pumps are used to compensate thenon-symmetric flow of differential cylinder is carried out. According to the leaking property of thesystem, a speed offset principle is also proposed to eliminate the cavitation and tension caused bythe leakage and condensation of oil, which makes the system be in the same state as a valvecontrolled circuit. This principle is explained theoretically and experimentally. Further therelationship that the pressures in cylinder chambers change with load and leakage, and therelationship between biasing speed and pre-load pressures in cylinder chambers are established. Theresearch has proved that the new system has similar technique features as those of controlled withservo valves, but due to the elimination of all the throttle lose the efficiency of system can beimproved greatly.

Automatic Control of Water Pumping Stations

Automatic Control of pumps is an interesting proposal to operate water pumping stations among many kinds of water pumping stations according to their functions.In this paper,our pumping station is being used for water supply system. This paper is to introduce the idea of pump controller and the important factors that must be considering when we want to design automatic control system of water pumping stations. Then the automatic control circuit with the function of all components will be introduced.

Safety of applying midazolam-ketamine-propofol sedation combination under the supervision of endoscopy nurse with patient-controlled analgesia pump in colonoscopy

AIM To compare the results of midazolam-ketaminepropofol sedation performed by an endoscopy nurse and anaesthetist during colonoscopy in terms of patient satisfaction and safety.METHODS American Statistical Association(ASA) Ⅰ-Ⅱ 60 patients who underwent colonoscopy under sedation were randomly divided into two groups: sedation under the supervision of an anaesthetist(SSA) and sedation under the supervision of an endoscopy nurse(SSEN). Both groups were initially administered 1 mg midazolam, 50 mg ketamine and 30-50 mg propofol. Continuation of sedation was performed by the anaesthetist in the SSAgroup and the nurse with a patient-controlled analgesia(PCA) pump in the SSEN group. The total propofol consumption, procedure duration, recovery times, pain using the visual analogue scale(VAS) and satisfaction score of the patients, and side effects were recorded. In addition, the patients were asked whether they remembered the procedure and whether they would prefer the same method in the case of re-endoscopy.RESULTS Total propofol consumption in the SSEN group was significantly higher(P < 0.05) than that in the SSA group. When the groups were compared in terms of VAS score, recovery time, patient satisfaction, recall of the procedure, re-preference for the same method in case of re-endoscopy, and side effects, there were no significant differences(P > 0.05) between the two groups. No long-term required intervention side effects were observed in either group.CONCLUSION Colonoscopy sedation in ASA Ⅰ-Ⅱ patients can be safely performed by an endoscopy nurse using PCA pump with the incidence of side effects and patient satisfaction levels similar to sedation under anaesthetist supervision.

Robust Non-fragile PID Controller Design for the Stroke Regulation of Metering Pumps

这个工作准时集中高精确的 metering 泵的一个班的规定。柔韧的非易碎的 PID (proportional-integral-derivative ) 控制器的一个调节参数的方法与假设被建议一个 PID 控制器有添加剂获得不安。一个 H 无限的柔韧的 PID 控制器能被解决线性矩阵不平等获得。这条途径靠近环的控制系统是 asymptotically 稳定的保证和转移的 H 无限的标准能从骚乱工作到一个控制系统的输出不到稀释骚乱的一个给定的常数。建议策略的控制表演比传统的 PID 显著地好的模拟盒子表演与控制器参数的不安处于状况来临。

Pressure control strategy for pump motor energy transfer unit

Multi-level pressure source system is a novel hydraulic system with distinct advantage of energy saving. In order to balance each pressure level of the multi-level pressure source system, a pump motor energy transfer unit is usually equipped. However, the pump motor energy transfer has the characteristics of poor starting and low response, which cause long time of pressure adjustment and large pressure jitter when the transformer is switched to system suddenly and the motor-side pressure has pressure impact when rail of the pump-side is switched. To address these problems, this paper proposes a compound control strategy of feedforward compensation control with Fuzzy-PID to improve the controllability of the multi-level pressure source system. A test rig of the pump motor energy transfer unit is built and the controllability of compound controller and PID controller are compared. The experiment results show that, compared with the traditional PID, the adjustment time and the pressure impact are reduced by 20% and 25% with the proposed compound control strategy. Therefore, the presented compound control strategy can be used to improve starting performance and robustness of the pump motor energy transfer unit control system.

Energy Analysis of Pid Controlled Heat Pump Dryer

In this experimental study, a heat pump dryer was designed and manufactured, in which drying air temperature was controlled PID. Manufactured heat pump dryer was tested in drying kiwi, avocado and banana from among tropical fruits and energy and exergy analyses were made. Drying air temperature changed between 40 oC - 40.2 oC while drying the tropical fruits. Before the drying process in heat pump dryer, initial moisture contents were determined as 4.31 g water / g dry matter for kiwi, 1.51 g water / g dry matter for avocado and 4.71 g water / g dry matter for banana. Then tropical fruits were dried separately in heat pump dryer. Drying air temperature was kept unchanged with the error of +0.2 oC. Drying air velocity changed between 0.3 and 0.4 m/s in a period of 310 min. COPws of the heat pump dryer was calculated as 2.49 for kiwi, 2.47 for banana and 2.41 for avocado during the experiments. EUR changed between 13 % and 28 % for kiwi, 18% and 33% for avocado and 13% and 42% for banana in heat pump dryer.

Control method on serial type pump-valve coordinated electro-hydraulic servo system

In order to compromise the conflicts between control accuracy and system efficiency of conventional electro-hydraulic servo systems,a novel pump-valve coordinated electro-hydraulic servo system was designed and a corresponding control strategy was proposed.The system was constituted of a pumpcontrolled part and a valve-controlled part,the pump controlled part is used to adjust the flow rate of oil source and the valve controlled part is used to complete the position tracking control of the hydraulic cylinder.Based on the system characteristics,a load flow grey prediction method was adopted in the pump controlled part to reduce the system overflow losses,and an adaptive robust control method was adopted in the valve controlled part to eliminate the effect of system nonlinearity and parametric uncertainties due to variable hydraulic parameters and system loads on the control precision.The experimental results validated that the adopted control strategy increased the system efficiency obviously with guaranteed high control accuracy.

LMI Approach to Robust H_∞/H_2 Controller Design with Regional Poles Constraint of a Pump-Motor System

The time domain guideposts requirements of a pump-motor system is transfered into a series of constraints which express the robust performance upper bound and regional poles limits of the closed loop system. Then the servo system control problem is transferred into the problem of robust performance optimizing under regional poles constrains described by linear matrix inequality （LMI）. These LMIs are easy to solve through the Matlab LMI-toolbox. Simulations indicate that the controller has excellent dynamic, static and disturbance rejection performance, and the control system is robust and has perfect H2 performance to the bounded external torque disturbance.

Controlling the Goos-H?nchen Shift via Incoherent Pumping Field and Electron Tunneling in the Triple Coupled InGaAs/GaAs Quantum Dots

We study the controlling of the Goos-Hanchen （GH） shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot （QD） nanostructures with electron tunneling and incoherent pumping field. It is shown that the lateral shift can become either large negative or large positive, which can be controlled by the electron tunneling and the rate of incoherent pump field in different incident angles. It is also demonstrated that the properties of the OH shifts are strongly dependent on the probe absorption beam of the intracavity medium due to the switching from superluminal light propagation to subluminal behavior or vice versa. Our suggested system can be considered as a new theoretical method for developing a new nano-optoelectronic sensor.

Modeling a high output marine steam generator feedwater control system which uses parallel turbine-driven feed pumps

当轮船以高速度旅行时，平行汽轮机驱动的给水泵被需要。为了学习海洋的蒸气生成器给水，控制使用平行的系统汽轮机驱动喂泵，海洋的蒸气生成器给水控制系统的一个数学模型被开发它包括二个蒸气生成器和平行的数学模型汽轮机驱动喂给水管子的泵以及数学模型并且喂调整阀门。平行的操作条件点汽轮机驱动喂泵被 Chebyshev 曲线计算合适的方法。为蒸气发电机的一个水位控制器和一个旋转速度控制器为汽轮机驱动喂泵也在模型被包括。数学模型和他们的控制器的精确性被从一个模拟器把他们的结果与那些作比较验证。