Hydrocarbon accumulation characteristics in basement reservoirs and exploration targets of deep basement reservoirs in onshore China

Based on the global basement reservoir database and the dissection of basement reservoirs in China,the characteristics of hydrocarbon accumulation in basement reservoirs are analyzed,and the favorable conditions for hydrocarbon accumulation in deep basement reservoirs are investigated to highlight the exploration targets.The discovered basement reservoirs worldwide are mainly buried in the Archean and Precambrian granitic and metamorphic formations with depths less than 4500 m,and the relatively large reservoirs have been found in rift,back-arc and foreland basins in tectonic active zones of the Meso-Cenozoic plates.The hydrocarbon accumulation in basement reservoirs exhibits the characteristics in three aspects.First,the porous-fractured reservoirs with low porosity and ultra-low permeability are dominant,where extensive hydrocarbon accumulation occurred during the weathering denudation and later tectonic reworking of the basin basement.High resistance to compaction allows the physical properties of these highly heterogeneous reservoirs to be independent of the buried depth.Second,the hydrocarbons were sourced from the formations outside the basement.The source-reservoir assemblages are divided into contacted source rock-basement and separated source rock-basement patterns.Third,the abnormal high pressure in the source rock and the normal–low pressure in the basement reservoirs cause a large pressure difference between the source rock and the reservoirs,which is conducive to the pumping effect of hydrocarbons in the deep basement.The deep basement prospects are mainly evaluated by the factors such as tectonic activity of basement,source-reservoir combination,development of large deep faults(especially strike-slip faults),and regional seals.The Precambrian crystalline basements at the margin of the intracontinental rifts in cratonic basins,as well as the Paleozoic folded basements and the Meso-Cenozoic fault-block basements adjacent to the hydrocarbon generation depressions,have favorable conditions for hydrocarbon accumulation,and thus they are considered as the main targets for future exploration of deep basement reservoirs.

Large-scale gas accumulation mechanisms and reservoir-forming geological effects in sandstones of Central and Western China

Large-scale gas accumulation areas in large oil-gas basins in central and Western China have multiple special accumulation mechanisms and different accumulation effects.Based on the geological theory and method of natural gas reservoir formation,this study examined the regional geological and structural background,formation burial evolution,basic characteristics of gas reservoirs,and fluid geology and geochemistry of typical petroliferous basins.The results show that the geological processes such as structural pumping,mudstone water absorption,water-soluble gas degasification and fluid sequestration caused by uplift and denudation since Himalayan stage all can form large-scale gas accumulation and different geological effects of gas accumulation.For example,the large-scale structural pumping effect and fluid sequestration effect are conducive to the occurrence of regional ultra-high pressure fluid and the formation of large-scale ultra-high pressure gas field;mudstone water absorption effect in the formation with low thickness ratio of sandstone to formation is conducive to the development of regional low-pressure and water free gas reservoir;the water-soluble gas degasification effect in large-scale thick sandstone can not only form large-scale natural gas accumulation;moreover,the degasification of water-soluble gas produced by the lateral migration of formation water will produce regional and regular isotopic fractionation effect of natural gas,that is,the farther the migration distance of water-soluble gas is,the heavier the carbon isotopic composition of methane formed by the accumulation.

Temperature dependence of spin pumping in YIG/NiO(x)/W multilayer

We report the temperature dependence of the spin pumping effect for Y_(3)Fe_(5)O_(12)(YIG,0.9μm)/NiO(tNiO)/W(6 nm)(tNiO=0 nm,1 nm,2 nm,and 10 nm)heterostructures.All samples exhibit a strong temperature-dependent inverse spin Hall effect(ISHE)signal I_(c)and sensitivity to the NiO layer thickness.We observe a dramatic decrease of I_(c)with inserting thin NiO layer between YIG and W layers indicating that the inserting of NiO layer significantly suppresses the spin transport from YIG to W.In contrast to the noticeable enhancement in YIG/NiO(tNiO≈1-2 nm)/Pt,the suppression of spin transport may be closely related to the specific interface-dependent spin scattering,spin memory loss,and spin conductance at the NiO/W interface.Besides,the I_(c)of YIG/Ni O/W exhibits a maximum near the TNof the AF NiO layer because the spins are transported dominantly by incoherent thermal magnons.

Characteristics of temporal evolution of particle density and electron temperature in helicon discharge

On the basis of considering electrochemical reactions and collision relations in detail, a direct numerical simulation model of a helicon plasma discharge with three-dimensional two-fluid equations was employed to study the characteristics of the temporal evolution of particle density and electron temperature. With the assumption of weak ionization, the Maxwell equations coupled with the plasma parameters were directly solved in the whole computational domain. All of the partial differential equations were solved by the finite element solver in COMSOL Multiphysics^（TM） with a fully coupled method. In this work, the numerical cases were calculated with an Ar working medium and a Shoji-type antenna. The numerical results indicate that there exist two distinct modes of temporal evolution of the electron and ground atom density, which can be explained by the ion pumping effect. The evolution of the electron temperature is controlled by two schemes： electromagnetic wave heating and particle collision cooling. The high RF power results in a high peak electron temperature while the high gas pressure leads to a low steady temperature. In addition, an OES experiment using nine Ar I lines was conducted using a modified CR model to verify the validity of the results by simulation, showing that the trends of temporal evolution of electron density and temperature are well consistent with the numerically simulated ones.

The Formation of Wind Curl in the Marine Atmosphere Boundary Layer over the East China Sea Kuroshio in Spring

Various data are used to investigate the characteristics of the surface wind field and rainfall on the East China Sea Kuroshio(ESK) in March and April, 2011. In March, the wind speed maximum shows over the ESK front(ESKF) in the 10 meter wind field, which agrees with the thermal wind effect. A wind curl center is generated on the warm flank of the ESKF. The winds are much weaker in April, so is the wind curl. A rainband exists over the ESKF in both the months. The Weather Research and Forecasting(WRF) model is used for further researches. The winds on the top of the marine atmosphere boundary layer(MABL) indicate that in March, a positive wind curl is generated in the whole MABL over the warm flank of the ESKF. The thermal wind effect forced by the strong SST gradient overlying the background wind leads to strong surface northeasterly winds on the ESKF, and a positive shearing vorticity is created over the warm flank of the ESKF to generate wind curl. In the smoothed sea surface temperature experiment, the presence of the ESKF is responsible for the strong northeast winds in the ESKF, and essential for the distribution of the rainfall centers in March, which confirms the mechanism above. The same simulation is made for April, 2011, and the responses from the MABL become weak. The low background wind speed weakens the effect of the thermal wind, thus no strong Ekman pumping is helpful for precipitation. There is no big difference in rainfall between the control run and the smooth SST run. Decomposition of the wind vector shows that local wind acceleration induced by the thermal wind effect along with the variations in wind direction is responsible for the pronounced wind curl/divergence over the ESKF.

The cardiac assistant effect of extra-aortic balloon pump on animals

Objective The aim of this study was to determine the effect of a new method of cardiac assistant therapy with an extra-aortic balloon pump on the experimental dogs in which myocardial ischemia or infarction were induced,and to observe its effectiveness and feasibility. Methods Twelve animal models of myocardia,1 infarction were established with the method of left

Application of MHD-Principles in Metallurgy

The paper describes MHD-methods for creating a pumping effect in metallurgical installations for pumping liquid metals.

Quantum pump effect in a four-terminal mesoscopic structure

Quantum pump effect in a four-terminal mesoscopic structure constructed from a homogeneous two- dimensional electron gas is investigated. Oscillating electric potentials are applied to the two opposite terminals of the four-terminal mesoscopic structure. In both the remaining two opposite terminals and in the central region there are constant potentials that do not change with time. The oscillating potentials change slowly in comparison with all of the internal time scales of the structure and the amplitude of the oscillating potentials is small in comparison with the Fermi energy. The current of each lead and the transmission coefficients from one lead to another are calculated by using the non-equilibrium Green＇s function approach under the adiabatic approximation. In the remaining two opposite terminals of the four-terminal structure, the quantum pump effect can produce an electric current whose magnitude and direction depends on the Fermi energy. The pumped currents are ascribed to the asymmetry of transmission coefficients with respect to the Fermi energy.